Electrochemical synthesis of a novel platinum nanostructure on a glassy carbon electrode, and its application to the electrooxidation of methanol

We show that the addition of white dextrin during the electrochemical deposition of platinum nanostructures (nano-Pt) on a glassy carbon electrode (GCE) results in an electrochemically active surface that is much larger than that of platinum microparticles prepared by the same procedure but in the absence of dextrin. The nano-Pt deposits are characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy, and electrochemical methods. The SEM images reveal deposits composed of mainly nanoparticles and short nanorods. The GCE was applied as a novel and cost-effective catalyst for methanol oxidation. The use of nano-Pt improves the electrocatalytic activity and the stability of the electrodes.

Preparation of electrochemically reduced graphene oxide-modified electrode and its application for determination of p-aminophenol

A simple and eco-friendly electrochemical method to reduce graphene oxide precursor was employed for fabrication of graphene sheets modified glassy carbon electrode, and then, the resulting electrode [electrochemically reduced graphene oxide (ERGO)/glassy carbon electrode (GCE)] was used to determine p-aminophenol. The experimental results demonstrated that the modified electrode exhibited excellent electrocatalytic activity toward the redox of p-aminophenol as evidenced by the significant enhancement of redox peak currents and the decreased peak-to-peak separation in comparison with a bare GCE. A highly sensitive and selective voltammetry determination of p-aminophenol is developed using the ERGO/GCE. This method has been applied for the direct determination of p-aminophenol in artificial wastewater.     

Platinum nanoparticles supported MoS2 nanosheet for simultaneous detection of dopamine and uric acid

Herein, platinum nanoparticles-decorated molybdenum disulfide(Pt NPs@MoS_2) nanocomposite has been synthesized via a microwave-assisted hydrothermal method, which was characterized by transmission electron microscopy(TEM) and powder X-ray diffraction(XRD). This MoS_2-based nanocomposite modified glass carbon electrode(Pt NPs@MoS_2/GCE) exhibited excellent electrocatalytic activity toward dopamine(DA) and uric acid(UA) due to their synergistic effect. Two well-defined oxidation peaks of DA and UA were obtained at Pt NPs@MoS_2/GCE with a large peak separation of 160 m V(DA-UA), suggesting that the modified electrode could individually or simultaneously analyze DA and AA. Under the optimal conditions, the peak currents of DA and UA were linearly dependent on their concentrations in the range of 0.5–150 and 5–1000 mmol/L with detection limit of 0.17 and 0.98 mmol/L, respectively. The proposed MoS_2-based sensor can also be employed to examine DA and UA in real samples with satisfactory results. Therefore, the Pt NPs@MoS_2 nanocomposite might offer a good possibility for electrochemical sensing and other electrocatalytic applications.     

Electrocatalysis of the SiC Particle‐Modified Glassy Carbon Electrode for the Oxidation of Adrenaline

The electrocatalytic properties of the SiC particle‐modified glassy carbon electrode (MGC) for adrenaline oxidation were studied by cyclic voltammetry (CV), double‐potential step chronocoulometry (DPSCC), and electrochemical impedance spectroscopy (EIS) techniques in McIlvaine buffer solution. It was shown that the electrode modified with SiC particles markedly displayed an electrocatalytic effect on the process of the electrochemical reaction of adrenaline, i.e., the activity and the reversibility of the MGC electrode has been significantly improved. This was attributed to the adsorption effect of the electroactive adrenaline molecules on the MGC electrode surface.     

Preparation and characterization of Ni(II)/polyacrylonitrile and carbon nanotube composite modified electrode and application for carbohydrates electrocatalytic oxidation

A nickel(II) into porous polyacrylonitrile–carbon nanotubes composite modified glassy carbon electrode (Ni/PAN-CNT/GCE) was fabricated by simple drop-casting and immersing technique. The unique electrochemical activity of Ni/PAN-CNT composite modified glassy carbon electrode was illustrated in 0.10?M NaOH using cyclic voltammetry. The Ni/PAN-CNT/GCE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni/PAN/GCE and Ni/CNT/GCE. The results of electrochemical impedance spectroscopy and scanning electron microscopy indicated the successful immobilization for PAN-CNT composite film. Kinetic parameters such as the electron transfer coefficient, α, and rate constant, k _s, of the electrode reaction were determined. Ni/PAN-CNT/GCE also shows good electrocatalytic activity toward the oxidation of carbohydrates (glucose, sucrose, fructose, and sorbitol). The electrocatalytic response showed a wide linear range (10–1,500, 12–3,200, 7–3,500, and 16–4,200?μM for glucose, sucrose, fructose, and sorbitol, respectively) as well as its experimental limit of detection can be achieved 6, 7, 5, and 11?μM for glucose, sucrose, fructose, and sorbitol, respectively. The modified electrode for carbohydrates determination is of the property of simple preparation, good stability, and high sensitivity.     

A new sensor architecture based on carbon Printex 6L to the electrochemical determination of ranitidine

A glassy carbon electrode (GCE) modified with carbon Printex 6L (Printex6L/GCE) as a novel sensor is proposed. A morphological study was carried out using scanning electron microscopy, and an electrochemical characterization of the proposed electrode was performed by cyclic voltammetry (CV) using [Fe(CN)₆]^4? as a redox probe. With the incorporation of the carbon Printex 6L film onto the GCE surface, the [Fe(CN)₆]^4? analytical signal was substantially increased and the difference between the oxidation and reduction potentials (ΔE _p) decreased, a characteristic of the electrocatalytic effect. Furthermore, the use of carbon Printex 6L film resulted in an 84 % increase in the oxidation current and a 123 % increase in the reduction current. Faster charge transfer was observed at the proposed electrode/electrolyte interface during CV when compared with GCE. The Printex6L/GCE was tested for ranitidine (RNT) sensing and showed a decrease in the working potential and an increase in the analytical signal, when compared with GCE, again demonstrating an electrocatalytic effect. Under optimized experimental conditions, the developed square-wave adsorptive anodic stripping voltammetry (SWAdASV) method presented an analytical curve that was linear in RNT concentration range from 1.98 × 10^?6 to 2.88 × 10^?5 mol L^?1 with a detection limit of 2.44 × 10^?7 mol L^?1. The developed Printex6L/GCE was successfully applied to the determination of RNT concentrations in human body fluid samples (urine and serum).     

The effect of electrochemically treated glassy carbon on the activity of supported Pt catalyst in methanol oxidation

Effect of electrochemical oxidation of glassy carbon on deposition of platinum particles and electrocatalytic activity of platinum supported on oxidized glassy carbon (Pt/GC_OX) were studied for methanol oxidation in H₂SO₄ solution. Platinum was potentiostatically deposited from H₂SO₄ + H₂PtCl₆ solution. Glassy carbon was anodically polarised in 0.5 M H₂SO₄ at 2.25 V vs. saturated calomel electrode (SCE) during 35 s. Electrochemical treatment of GC support, affecting not significantly the real Pt surface area, leads to a better distribution of platinum on the substrate and has remarkable effect on the activity. The activity of the Pt/GC_OX electrode for methanol oxidation is larger than polycrystalline Pt and for more than one order of magnitude larger than Pt/GC electrode. This increase in activity indicates the pronounced role of organic residues of GC support on the properties of Pt particles deposited on glassy carbon.     

para-Sulfonatocalix[6]arene-modified silver nanoparticles electrodeposited on glassy carbon electrode: Preparation and electrochemical sensing of methyl parathion

In this paper, a new electrochemical sensor, based on modified silver nanoparticles, was fabricated using one-step electrodeposition approach. The para-sulfonatocalix[6]arene-modified silver nanoparticles coated on glassy carbon electrode (pSC₆-Ag NPs/GCE) was characterized by attenuated total reflection IR spectroscopy (ATR-IR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM), etc. The pSC₆ as the host are highly efficient to capture organophosphates (OPs), which dramatically facilitates the enrichment of nitroaromatic OPs onto the electrochemical sensor surface. The combination of the host-guest supramolecular structure and the excellent electrochemical catalytic activities of the pSC₆-Ag NPs/GCE provides a fast, simple, and sensitive electrochemical method for detecting nitroaromatic OPs. In this work, methyl parathion (MP) was used as a nitroaromatic OP model for testing the proposed sensor. In comparison with Ag NPs-modified electrode, the cathodic peak current of MP was amplified significantly. Differential pulse voltammetry was used for the simultaneous determination of MP. Under optimum conditions, the current increased linearly with the increasing concentration of MP in the range of 0.01-80 μM, with a detection limit of 4.0 nM (S/N = 3). The fabrication reproducibility and stability of the sensor is better than that of enzyme-based electrodes. The possible underlying mechanism is discussed.     

Electrochemical Preparation of Yttrium Hexacyanoferrate on Reduced Graphene Oxide and Its Application to Analgesic Drug Sensor

Herein, we report a template free and surfactant less electrochemical approach for the preparation of flower‐like yttrium hexacyanoferrate (YHCF) particles on reduced graphene oxide (RGO) modified glassy carbon electrode (GCE). The morphology of YHCF particles has been controlled by varying the molar ratio of Y(NO₃)₂ and K₃Fe(CN)₆ for the first time. The surface morphology of as‐prepared RGO/YHCF composite was characterized using SEM, EDX, IR and XRD methods. The electrocatalytic activity of the RGO/YHCF composite modified GCE towards Paracetamol (PA) oxidation has been investigated by using cyclic voltammetry (CV) and linear sweep voltammetry (LSV). Besides, the practical feasibility of the fabricated modified GCE has been demonstrated through the determination of PA from commercially purchased Paracetamol tablets.     

Electrooxidation of hydrazine catalyzed by 4-hydroxy-2,2,6,6-tetramethyl-piperidinyloxy (TEMPOL)

The electrocatalytic oxidation of hydrazine (N₂H₄) by TEMPOL on a glassy carbon electrode has been studied. The kinetic parameters of the electrode reaction were measured and the electrocatalytic reaction mechanism for the electrooxidation of hydrazine in the presence of TEMPOL was proposed. TEMPOL undergoes a reversible single electron transfer process at a glassy carbon electrode (GCE) at pH 1.2–8.0, and the electrochemical oxidation of N₂H₄ at a GCE can be catalyzed by TEMPOL. The catalytic current is affected by the concentration of catalyst and pH. The overall number of electrons involved in the catalytic oxidation of N₂H₄ and the number of electrons involved in the rate determining step (rds) are 4 and 1, respectively. The catalytic oxidation obeys the first-order kinetics with respect to N₂H₄. The proposed mechanism is consistent with the experimental data, and a cation intermediate [> N---O---N₂H₄⁺], formed by reaction of oxoammonium salt with N₂H₄, is involved in the reaction.     

Catalytic Effect on Silver Electrodeposition of Gold Deposited on Carbon Electrodes

A new methodology, based on silver electrocatalytic deposition and designed to quantify gold deposited onto carbon paste electrode (CPE) and glassy carbon electrode (GCE), has been developed in this work. Silver (prepared in 1.0 M NH₃) electrodeposition at ?0.13 V occurs only when gold is previously deposited at an adequate potential on the electrode surface for a fixed period of time. When a CPE is used as working electrode, an adequate oxidation of gold is necessary. This oxidation is carried out in both 0.1 M NaOH and 0.1 M H₂SO₄ at oxidation potentials. When a GCE is used as working electrode, the oxidation steps are not necessary. Moreover, a cleaning step in KCN, which removes gold from electrode surface, is included. To obtain reproducibility in the analytical signal, the surface of the electrodes must be suitably pretreated; this electrodic pretreatment depends on the kind of electrode used as working electrode. Low detection limits (5.0×10^?10 M) for short gold deposition times (10 min for CPE and 5 min for GCE) were achieved with this novel methodology. Finally, sodium aurothiomalate can be quantified using silver electrocatalytic deposition and GCE as working electrode. Good linear relationship between silver anodic stripping peak and aurothiomalate concentration was found from 5.0×10^?10 M to 1.0×10^?8 M.     

Reduced Graphene Oxide Supported Cobalt Bipyridyl Complex for Sensitive Detection of Methyl Parathion in Fruits and Vegetables

Herein, we are described a green route to prepare reduced graphene oxide supported cobalt inorganic complex nanocomposite (GRGO/[Co(bpy)₃]) (bpy=2,2′‐bipyridine) through facile and wet chemical approach. The formation of the nanocomposite was confirmed through suitable physical and chemical characterization techniques. The GRGO/[Co(bpy)₃] nanocomposite was coated on the pretreated glassy carbon electrode (GCE). The GCE/GRGO/[Co(bpy)₃] modified electrode has excellent electrocatalytic ability towards methyl parathion reduction, while the overpotential drops drastically to –0.18 V (vs. Ag/AgCl). Moreover, the effect of concentration, scan rate and electrolyte pH were detail studied. Besides, the linear response range was 0.05‐1700 μM and the detection limit was 0.0029 μM (S/N=3) and the sensitivity was 1.8197 μA μM⁻¹ cm⁻². Moreover, the fabricated electrode has high level of selectivity, which delivers satisfactory repeatability, reproducibility and stability. The sensing method was successfully demonstrated in real samples such as, tomato and apple samples.     

Phase transfer catalysis: Synthesis of monodispersed FePt nanoparticles and its electrocatalytic activity

Using dibenzo-24-crown-8-ether (DB24C8) as phase transfer catalyst, the monodispersed iron–platinum (FePt) alloy nanoparticles with size of ∼17 nm were synthesized by reduction of H₂PtCl₆·6H₂O and FeCl₂·4H₂O in the solvothermal system. The structure, magnetic property and electrocatalytic activity of FePt nanoparticles were characterized by transmission electron microscopy (TEM), X-ray diffraction system (XRD), vibration sample magnetometer (VSM) and CHI 820 electrochemical analyser (three electrodes system, the reference electrode is saturated calomel electrode (SCE), the counter electrode is platinum electrode and the glassy carbon electrode is used as working electrode (GCE)), respectively. The results show that the as-synthesized FePt nanoparticles have a chemically disordered fcc structure and can be transformed into chemically ordered fct structure after annealing treatment above 400 °C, simultaneously accompanying with the coercivity changed from 5 to 2400 Oe. CVs of 0.5 M H₂SO₄/0.5 M CH₃OH on GCE modified with FePt nanoparticles monolayer illustrate that the as-synthesized FePt nanoparticles have strong electrocatalytic activity toward the oxidation of CH₃OH in aqueous solution.     

Study on the Impedance Characteristic and Electrocatalytic Activity of Platinum‐Modified Polyaniline Film

The composite electrode of platinum‐modified polyaniline film is formed in 0.5 M H₂SO₄ + 3 mM H₂PtCl₆ solution by cyclic potential or constant potential deposition of platinum particles in polyaniline film. To make a comparison, the polyaniline film with the same initial thickness and structure is also treated with the cyclic potential or constant potential polarization in 0.5 M H₂SO₄ solution. The electrochemical impedance spectroscopy (EIS) of the composite electrode of platinum‐modified polyaniline film is studied in sulfuric acid solution and compared with the EIS of the polyaniline film without platinum dispersion. The results show that the different modes of potential polarization affect greatly the nature and distribution of the platinum particles, instead of the structure of the polyaniline film (matrix). The electrode reaction kinetics and mass transport process parameters involving charge transfer resistance (R_ct), double layer capacitance (C_dl), constant phase elements (CPE) and Warburg impedance in platinum substrate/platinum‐modified polyaniline film/solution interface are discussed on the basis of the interpretation of the characteristic impedance spectra and connected to the electrocatalytic activity on the oxidation of methanol molecules.     

A Novel Electrochemical Method for the Analysis of Hydrogen Peroxide with the Use of a Glassy Carbon Electrode Modified by a Prussian Blue/Copper‐Gold Bimetallic Nanoparticles Hybrid Film

A novel Prussian blue/copper‐gold bimetallic nanoparticles hybrid film modified electrode was prepared by electrochemical deposition on a glassy carbon electrode (PB/Cu‐AuNPs/GCE). Morphology and electrochemistry of this electrode were studied by UV‐vis spectroscopy, scanning electron microscopy, X‐ray diffraction, cyclic voltammetry and electrochemical impedance spectroscopy. The sensor showed significantly better electrocatalytic activity for the reduction of hydrogen peroxide in comparison with the single PB/GCE and PB/AuNPs/GCE. This was attributed to the synergistic effect of PB and Cu‐Au bimetallic nanoparticles. Also, the sensor demonstrated an overall high level of performance for the analysis of H₂O₂ in the concentration range from 0.002 to 0.84 mM.     

Electrocatalytic oxidation of hydrogen peroxide and cysteine at a glassy carbon electrode modified with platinum nanoparticle-deposited carbon nanotubes.

A glassy carbon electrode modified with platinum nanoparticle-decorated carbon nanotubes (Pt-CNT/GCE) was prepared. The electrochemical behaviors for the catalysis oxidations of hydrogen peroxide and cysteine were studied. The Pt-CNT/GCE showed catalytic activity for electro-oxidation of hydrogen peroxide at 0.6 V in PBS (pH = 7.0) and for that of cysteine at 0.55 V in sulfuric acid medium (pH 相似文献   

Copper hexacyanoferrate multilayer films on glassy carbon electrode modified with 4-aminobenzoic acid in aqueous solution

4-Aminobenzoic acid (4-ABA) was covalently grafted on a glassy carbon electrode (GCE) by amine cation radical formation during the electrooxidation process in 0.1 M KCl aqueous solution. X-ray photoelectron spectroscopy (XPS) measurement proves the presence of 4-carboxylphenylamine on the GCE. Electron transfer processes of Fe(CN)₆³⁻ in solutions of various pHs at the modified electrode are studied by both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Changing the solution pH would result in the variation of the terminal group's charge state, based on which the surface pK_a values were estimated. The copper hexacyanoferrate (CuHCF) multilayer films were formed on 4-ABA/GCE prepared in aqueous solution, and which exhibit good electrochemical behavior with high stability.     

The determination of adrenaline on the porous gold film modified glassy carbon electrode

A simple method has been developed to prepare porous Au film-modified glassy carbon electrode (PAu/GCE). By using a simple electrodeposition process, a dense porous Au (PAu) film possessing good adhesion, large surface area, and mechanical integrity, was obtained. The surface characterization studies confirm that the formation of porous film constituted of Au nanoparticles. It was found, from the CV studies, that the prepared PAu modified electrode shows excellent catalytic activity for the electro-oxidation of adrenaline (AD) in a neutral medium. As to the electrochemical response of redox of adrenaline/adrenalinequinone couple in 0.1 M pH 7.0 phosphoate buffer solution (PBS), at the PAu/GCE, the anodic peak potential E _pa shifted by 50 mV negatively in the negative direction, compared to that on the Au film modified glassy carbon electrode (Au/GCE), indicating the extraordinary activity of PAu in electrocatalysis for the oxidation process of AD. The application of the modified electrode for the determination of AD in pharmaceutical preparations indicates that the PAu/GCE has good sensitivity and reproducibility.     

Electrochemical preparation of effective and low cost catalyst for electrooxidation of ethanol

A nanocatalyst coating was prepared at surface of a glassy carbon electrode by electropolymerization of pyrrole by cycling the electrode potential between ?0.8 and 0.8 V (vs. Ag/AgCl). Then, polypyrrole film was potentiostatically coated with platinum nanoparticles at constant potential of ?0.2 V (vs. Ag/AgCl). The resulting electrode was denoted as GCE/PPy/Pt. This modified electrode was characterized by IR, SEM, TEM and EDX. The electrocatalytic oxidation of ethanol at the GCE/PPy/Pt has been investigated using cyclic voltammetric and chronoamperometric methods. The effects of various parameters on electrocatalytic oxidation of the ethanol, such as the thickness of PPy film, the amount of platinum nanoparticles, ethanol concentration, potential scan rate and working potential limit in anodic direction, were investigated. The kinetic of the ethanol oxidation is discussed on the GCE/PPy/Pt. The stability and reproducibility of this modified electrode were also studied.     

Direct electrochemistry and electrocatalysis of hemoglobin in gelatine film modified glassy carbon electrode

Direct electrochemical and electrocatalytic behavior of hemoglobin (Hb) immobilized on glass carbon electrode (GCE) containing gelatine (Gel) films was investigated. The characteristics of Hb/Gel film modified GC electrode were performed by using SEM microscopy, UV-vis spectroscopy and electrochemical methods. The immobilized Hb showed a couple of quasi-reversible redox peak with a formal potential of −0.38 V (versus SCE) in 0.1 M pH 7.0 PBS. The formal potential changed linearly from pH 4.03 to 8.41 with a slope value of −52.0 mV pH⁻¹, which suggested that a proton transfer was accompanied with each electron transfer (ET) in the electrochemical reaction. The Hb/gelatine/GCE displayed a rapid amperometric response to the reduction of H₂O₂ and nitrite.