Proton-controlled photoisomerization of 1-(2-pyridyl)-2-(2-quinolyl)ethylene

Quantum-chemical calculations (B3LYP/6-31G*) predict the formation of intramolecular hydrogen bond (IMHB) in the monoprotonated Z-isomer of 1-(2-pyridyl)-2-(2-quinolyl)ethylene (2P2Q), with this bond stabilizing the isomer relative to its E-counterpart. An experimentally observed increase in the quantum yield of trans-cis photoisomerization (φ_tc) by more than an order of magnitude (from 0.033 to 0.42 in acetonitrile) on passing from the neutral to the monoprotonated form of 2P2Q can be associated with IMHB, which manifested itself in the spectral properties of the Z-isomer. The IMHB breaks in the diprotonated form, and the value of φ_tc decreases back to the initial value. In addition to the photoisomerization, the photoreduction and photoaddition reactions of solvent molecules have been observed in an ethanol solution of 2P2Q.     

Complexation of uranium by 2-(2-thiazolylazo)-4-methoxyphenol and 2-(2-thiazolylazo)-5-methoxyphenol

A comparative study has been made of the complexation of uranium(VI) by 2-(2-thiazolyl)-4-methoxyphenol (TAMH) and 2-(2-thiazolylazo)-5-methoxyphenol(TAMR). The complexes are less stable and have lower molar absorptivities than the PAR and TAR complexes but are still useful for determination of uranium. The TAMH chelate can be extracted into isobutyl methyl ketone. Both complexes are 1:1 metal :ligand. For the TAMH complex log beta(1) = 8.8, = 1.4 x 10(4) at 610 mmu; for the TAMR complex log beta(1) = 8.1, = 2.0 x 10(4) at 530 mmu.     

Photoelectron spectroscopy and density functional theory study of TiAlO(y) (-) (y=1-3) and TiAl(2)O(y) (-) (y=2-3) clusters

Small titanium-aluminum oxide clusters, TiAlO(y) (-) (y=1-3) and TiAl(2)O(y) (-) (y=2-3), were studied by using anion photoelectron spectroscopy. The adiabatic detachment energies of TiAlO(y) (-) (y=1-3) were estimated to be 1.11±0.05, 1.70±0.08, and 2.47±0.08eV based on their photoelectron spectra; those of TiAl(2)O(2) (-) and TiAl(2)O(3) (-) were estimated to be 1.17±0.08 and 2.2±0.1eV, respectively. The structures of these clusters were determined by comparison of density functional calculations with the experimental results. The structure of TiAlO(-) is nearly linear with the O atom in the middle. That of TiAlO(2) (-) is a kite-shaped structure. TiAlO(3) (-) has a kite-shaped TiAlO(2) unit with the third O atom attaching to the Ti atom. TiAl(2)O(2) (-) has two nearly degenerate Al-O-Ti-O-Al chain structures that can be considered as cis and trans forms. TiAl(2)O(3) (-) has two low-lying isomers, kite structure and book structure. The structures of these clusters indicate that the Ti atom tends to bind to more O atoms.     

Improved preparation of alkyl 2-(3-indolyl)-3-nitroalkanoates under fully heterogeneous conditions: stereoselective synthesis of alkyl (E)-2-(3-indolyl)-2-alkenoates

Ethyl 3-nitro-2-alkenoates can be generated starting from nitroalkanes and ethyl 2-oxoacetate under heterogeneous conditions that minimize work-up procedures, avoid any purification step and direct manipulation of the nitroalkene system. Reaction of ethyl 3-nitro-2-alkenoates, formed in situ from their acetoxy precursors, with indoles in the presence of basic alumina affords ethyl 2-(3-indolyl)-3-nitroalkanoates that are central intermediates for the preparation of tryptamines and carboline alkaloids. A base promoted elimination of nitrous acid from these nitroindolyl derivatives readily produces ethyl 2-(3-indolyl)-2-alkenoates with high E stereoselectivity. The latter compounds can be used as Michael acceptors in intra- and intermolecular reactions with nucleophilic reagents.     

Synthesis of (Z)-4-hydroxytamoxifen and (Z)-2-[4-[1-(p-hydroxyphenyl)-2-phenyl]-1butenyl]phenoxyacetic acid

The synthesis of (Z)-4-hydroxytamoxifen and (Z)-2-[4-[1-(p-hydroxyphenyl)-2-phenyl]-1-butenyl]phenoxyacetic acid was accomplished using a McMurry reaction as the key step. The perfluorotolyl derivatives of the McMurry products enabled the separation of the minor undesirable geometrical isomer. The methodology proceeds without E,Z isomerization, employs a very mild final debenzylation step compatible with a large array of functional groups, and can be applied to the generation of a variety of 4-hydroxytamoxifen analogues.     

(S)-(2-(2'-Pyridyl)ethyl)cysteamine and (S)-(2-(2'-pyridyl)ethyl)-d,l-homocysteine as ligands for the "fac-[M(CO)(3)](+)" (M = Re, (99m)Tc) core

The reaction of fac-[NEt(4)](2)[Re(CO)(3)Br(3)] with (S)-(2-(2'-pyridyl)ethyl)cysteamine, L(1), in methanol leads to the formation of the cationic fac-[Re(CO)(3)(NSN)][Br] complex, 1, with coordination of the nitrogen of the pyridine, the sulfur of the thioether, and the nitrogen of the primary amine. When fac-[NEt(4)](2)[Re(CO)(3)Br(3)] reacts with the homocysteine derivative (S)-(2-(2'-pyridyl)ethyl)-d,l-homocysteine, L(2), the neutral fac-Re(CO)(3)(NSO) complex, 2, is produced with coordination of the nitrogen of the primary amine, the sulfur of the thioether, and the oxygen of the carboxylate group, while the pyridine ring remains uncoordinated. The analogous technetium-99m complexes, 1' and 2', were also prepared quantitatively by the reaction of L(1) and L(2) with the fac-[(99m)Tc(CO)(3)(H(2)O)(3)](+) precursor at 70 degrees C in water. Given that both (S)-(2-(2'-pyridyl)ethyl)cysteamine and homocysteine can be easily N- or S-derivatized by a bioactive molecule of interest, both the NSN or NSO ligand systems could be used to develop target-specific radiopharmaceuticals for diagnosis and therapy.     

2-(2-thiazolylazo)-4-methoxyphenol and 2-(2-thiazolylazo)-5-methoxyphenol as metal-ion indicators

2-(2-Thiazolylazo)-5-methoxyphenol (TAMR) and 2-(2-thiazolylazo)-4-methoxyphenol (TAMH) are shown to be good indicators for the titration of many metal ions with EDTA. TAMH is better and more widely applicable than TAMR. The acid dissociation constants have been determined by spectrophotometry. The effect of pH on the absorbance of the indicators and metal-indicator complexes is reported.     

Synthesis of 2-(2-methoxyethyl)- and 2-(2-thiomethoxyethyl)-aniline and related compounds

Summary 2-(2-Nitrophenyl)-ethanol (2) was methylated with dimethyl sulfate to give 2-(2-methoxyethyl)-1-nitrobenzene (3a) which then was reduced with hydrazine hydrate in the presence ofRaney nickel to 2-(2-methoxyethyl)-aniline (1a). Compound1a can be transformed into the N-monosilylated derivative4 by lithiation withn-butyllithium and subsequent reaction with chlorotrimethylsilane. Reaction of2 withp-toluenesulfonyl chloride yields 2-(2-nitrophenyl)-ethylp-toluenesulfonate (5), which reacts with sodium thiomethoxide to give 2-(2-nitrophenyl)-ethylp-toluenesulfonate (5), which reacts with sodium thiomethoxide to give 2-(2-thiomethoxyethyl)-1-nitrobenzene (3b).3b was reduced with hydrazine hydrate in the presence ofRaney nickel to yield 2-(2-thiomethoxyethyl)-aniline (1b). Ethyl (2-nitrophenyl)-acetate (6) could be dimethylated with methyl iodide in the presence of potassiumtert-butoxide and 18-crown-6 to give ethyl 2-methyl-2-(2-nitrophenyl)-propionate (7). Reduction of7 with lithium borohydride yields 2,3-dihydro-3,3-dimethyl-1H-indole (9) and 2-[(1-hydroxy-2-methyl)-2-propyl]-aniline (10).

---

Synthese von 2-(2-Methoxyethyl)- und 2-(2-Thiomethoxyethyl)-anilin und verwandten Verbindungen

Zusammenfassung 2-(2-Nitrophenyl)-ethanol (2) wurde mit Dimethylsulfat zu 2-(2-Methoxyethyl)-1-nitrobenzol (3a) methyliert, das sich mit Hydrazinhydrat in Gegenwart vonRaney-Nickel zu 2-(2-Methoxyethyl)-anilin (1a) reduzieren läßt. Verbindung1a kann durch Metallierung mitn-Butyllithium und anschließende Reaktion mit Chlortrimethylsilan in dasN-monosilylierte Derivat4 umgewandelt werden. Reaktion von2 mitp-Toluolsulfonylchlorid ergab 2-(2-Nitrophenyl)-ethyl-p-Toluolsulfonat (5), das mit Natriumthiomethanolat zu 1-Nitro-2-(2-thiomethoxyethyl)-benzol (3b) reagiert.3b wurde mit Hydrazinhydrat in Gegenwart vonRaney-Nickel zu 2-(2-Thiomethoxyethyl)-anilin (1b) reduziert. Ethyl-2-(nitrophenyl)-acetat (6) kann mit Methyliodid in Gegenwart von Kalium-tert-butoxid und 18-Krone-6 zu Ethyl-2-methyl-2-(2-nitrophenyl)-propionat (7) dimethyliert werden. Reduktion von7 mit Lithiumborhydrid lieferte 2,3-Dihydro-3,3-dimethyl-1H-indol (9) und 2-[(1-Hydroxy-2-methyl)-2-propyl]-anilin (10).

     

Structure,Z′ = 2 Crystal Packing Features of 3-(2-Chlorobenzylidene)-5-(p-tolyl)furan-2(3H)-one

3-(2-Chlorobenzylidene)-5-(p-tolyl)furan-2(3H)-one (1), C₁₈H₁₃ClO₂, crystallizes with Z = 8 and Z′ = 2, and the structure at 100 K has orthorhombic (Pna2₁) symmetry. Each kind of molecule takes part in π–π stacking interactions to form infinite chains parallel to the c axis. We believe that the existence of two forms can be explained by the probable rotation around a single C–C bond. The quantum chemical modeling reveals that these molecules are almost equivalent energetically, and they can be described as the two most stable conformers (rotamers) with a minor rotational barrier of about 0.67 kcal/mol.     

Synthese und Umlagerungsreaktionen von 2-(2-Amino-anilino)-2-imidazolin-Derivaten

The nitro-imidazolines V and VI are formed by addition reaction of ethylenediamine to the isothiocyanates III and IV. The nitro group is then converted by hydrogenation to the amino group, giving XI and XII, which can be acylated selectively to IX and X. By rearrangement in boiling xylene, the compounds XI and XII give the corresponding 2-(2-aminoethylamino)-benzimidazoles XIII and XIV. The benzoylated derivative IX gives the benzimidazole derivative XVIII by rearrangement and subsequent migration of the benzoyl group, while the benzylated derivative XVI gives the rearranged benzimidazole XXII. The benzimidazole structure of the rearranged products is proven by unambiguous synthesis of XIII, starting with 2-chlorobenzimidazole (VII) and mono-N-acetyl-ethylene-diamine to give compound VIII, from which XIII is obtained by hydrolysis.     

Bioanalysis of (E)-5-(2-bromovinyl)-2'-deoxyuridine

(E)-5-(2-Bromovinyl)-2'-deoxyuridine is an antiviral drug that is experimentally used for modulation of the antitumour effect of fluoropyrimidines, such as ftorafur and 5-fluorouracil. The isolation of the analyte, in the presence of 5-fluorouracil, from the matrix is performed either by means of a simple protein precipitation (plasma) or by means of a liquid-liquid extraction with ethyl acetate (urine). Following pretreatment, the analyte is analysed by reversed-phase chromatography and quantified by absorbance detection at 307 nm. The minimum detectable concentration in plasma and urine samples is ca. 6 ng/ml. The recovery after deproteination of plasma samples is 75%, while after liquid-liquid extraction of urine the recovery amounts 92%. The degree of protein binding of the analyte, measured by ultrafiltration, is found to be 97%. These data allow the bioanalysis of (E)-5-(2-bromovinyl)-2'-deoxyuridine for pharmacokinetic studies.     

Determination of titanium by adsorption-voltammetry with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)-phenol (5-Br-PADAP)

Summary The 1:1 complex between titanium (IV) and 5-Br-PADAP can be used to determine titanium by adsorption voltammetry at a stationary Hg-electrode. The experimental conditions for the determination are described. The detection limit is 3×10^–10 mol/l Ti (0.015 ppb). Calibration curves are linear for solutions containing 4×10^–10 to 5×10^–8 mol/l Ti(IV) and an enrichment time of 3 min. The influence of foreign ions was investigated. The determination can be carried out in the presence of a 5000-fold excess of iron.     

Reaktionen von 3-(Dimethylamino)-2H-azirinen mit 1,3-Benzoxazol-2(3H)-thion

Reaction of 3-(Dimethylamino)-2H-azirines with 1,3-Benzoxazole-2(3H)-thione The reaction of 3-(dimethylamino)-2H-azirines 2 with 1,3-benzoxazole-2(3H)-thione ( 5 ), which can be considered as NH-acidic heterocycle (pK_aca. 7.3), in MeCN at room temperature, leads to 3-(2-hydroxyphenyl)-2-thiohydantoins 6 and thiourea derivatives of type 7 (Scheme 2). A reaction mechanism for the formation of the products via the crucial zwitterionic intermediate A ′ is suggested. This intermediate was trapped by methylation with Mel and hydrolysis to give 9 (Scheme 4). Under normal reaction conditions, A ′ undergoes a ring opening to B which is hydrolyzed during workup to yield 6 or rearranges to give the thiourea 7. A reasonable intermediate of the latter transformation is the isothiocyanate E (Scheme 3) which also could be trapped by morpholine. In i-PrOH at 55–65° 2a and 5 react to yield a mixture of 6a , 2-(isopropylthio)-1,3-benzoxazole ( 12 ), and the thioamide 13 (Scheme 5). A mechanism for the surprising alkylation of 5 via the intermediate 2-amino-2-alkoxyaziridine F is proposed. Again via an aziridine, e.g. H ( Scheme 6 ), the formation of 13 can be explained.     

First row transition metal complexes of (E)-2-(2-(2-hydroxybenzylidene) hydrazinyl)-2-oxo-N-phenylacetamide complexes

Manganese(II), iron(II), cobalt(II), nickel(II), copper(II), and chromium(III) complexes of (E)-2-(2-(2-hydroxybenzylidene)hydrazinyl)-2-oxo-N-phenylacetamide were synthesized and characterized by elemental and thermal (TG and DTA) analyses, IR, UV-vis and (1)H NMR spectra as well as magnetic moment. Mononuclear complexes are obtained with 1:1 molar ratio except [Mn(HOS)(2)(H(2)O)(2)] and [Co(OS)(2)](H(2)O)(2) complexes which are obtained with 1:2 molar ratios. The IR spectra of ligand and metal complexes reveal various modes of chelation. The ligand behaves as a monobasic bidentate one and coordination occurs via the enolic oxygen atom and azomethine nitrogen atom. The ligand behaves also as a monobasic tridentate one and coordination occurs through the carbonyl oxygen atom, azomethine nitrogen atom and the hydroxyl oxygen. Moreover, the ligand behaves as a dibasic tridentate and coordination occurs via the enolic oxygen, azomethine nitrogen and the hydroxyl oxygen atoms. The electronic spectra and magnetic moment measurements reveal that all complexes possess octahedral geometry except the copper complexes possesses a square planar geometry. From the modeling studies, the bond length, bond angle, HOMO, LUMO and dipole moment had been calculated to confirm the geometry of the ligands and their investigated complexes. The thermal studies showed the type of water molecules involved in metal complexes as well as the thermal decomposition of some metal complexes. The protonation constant of the ligand and the stability constant of metal complexes were determined pH-metrically in 50% (v/v) dioxane-water mixture at 298 K and found to be consistent with Irving-Williams order. Moreover, the minimal inhibitory concentration (MIC) of these compounds against Staphylococcus aureus, Escherechia coli and Candida albicans were determined.     

Synthesis of 1-(alkylamino)- and 1-(dialkylamino)benzimidazoline-2-thiones

Unlike 1-aminobenzimidazoles, 1-alkylaminobenzimidazoles are thiolated on fusing with sulfur without elimination of theN-amino group, yielding the previously unknown 1-(alkylamino)benzimidazoline-2-thiones. These compounds can be more conveniently obtained on a preparative scale by thiolation of 1-alkylacetamidobenzimidazoles with subsequent hydrolytic elimination of the acetyl group. When 1-(dialkylamino)benzimidazoles are fused with sulfur, they are converted into 1-(dialkylamino)benzimidazoline-2-thiones. By alkylation of 1-(methylamino)- and 1-(diethylamino)benzimidazoline-2-thiones with methyl iodide in alkaline media the corresponding 2-(methylthio)benzimidazoles were prepared.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2231–2235, November, 1995.The authors are grateful to the Contest Center of Basic Natural Science at St. Petersburg University for financial support of this study.     

Spectrophotometric determination of uranium with 1-(2-pyridylazo)-2-naphthol

1-(2-Pyridylazo)-2-naphthol (PAN) rcacts with uranium to form a deep red precipitate in ammoniacal solutions, this can be extracted with chloroform if sodium chloride or sulfate is added and it has a maximum absorption at 560 mμ The color is stable and follows Beer's law. Trace amounts of uranium may be determined in the presence of many metals without prior separation if strong complexing agents, such) as EDTA or cyanide, are added     

Surface modification of poly(2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) by confined photo-catalytic oxidation

In this study, the surface of π-conjugated polymer, poly(2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV), was successfully modified with the sulfate anion (SO(4-)) groups by the confined photo-catalytic oxidation (CPO). After the surface modification, the water contact angle of MEH-PPV is changed from 95.5° to 82.1° without influence on its optical properties (based on the UV and PL spectra), and the water droplet can be absorbed on the modified MEH-PPV surface without sliding even at substrate tilt angles of 90° and 180°. The CPO on the MEH-PPV surface is able to further expand the use of MEH-PPV for applications. In addition, the water transport test indicates that the modified MEH-PPV can be a candidate for transporting water droplet.     

Synthese von (±)-(E)-2-(1-thia-4-äthoxycarbonylbutyl)-4-(3-hydroxy-1-octenyl)-Δ1-pyrrolin und seiner analogen

Starting from 4-methoxycarbonylpyrrolidin-2-one (1) the racemic thiolactim ethers (7a-h) can be obtained via S-alkylation of the thiolactam alcohol (3), subsequent oxidation, Horner-Emmons-Wittig reaction and reduction of the enones.     

苯噻草胺的极谱特性研究

在 p H3.4 H3PO4-Na H2 PO4缓冲溶液中 ,苯噻草胺在 -1 .1 0 V左右产生一灵敏示波极谱波 ,利用此波可测定微量苯噻草胺 ,线性范围为 3.0× 1 0 - 8～ 2 .0× 1 0 - 5 mol/L,检出限为 1 .8× 1 0 - 8mol/L。     

Micellar chromatographic separation of vanadium(V) chelate with 2-(2-thiazolylazo)-5-dimethylaminophenol

Summary In reversed phase—high performance liquid chromatography for metal chelates with 2-(2-thiazolylazo)-5-dimethylaminophenol, an aqueous non-ionic surfactant solution is used as a mobile phase. Among V(V), Fe(III), Cu(II), Co(II), Ni(II), Cd(II), Zn(II), Mn(II), and Al(III), only the V(V) chelate gave a resolved peak by using 0.8% w/w poly(oxyethylene)_n-4-nonylphenyl ether (n=20) solution buffered at pH 3.8. V(V) can be selectively separated and sensitively determined.