Computational study of reaction pathways in the course of interaction of deactivated silylenes with buta-1,3-diene

The PESs of systems including deactivated silylenes (SiHHal, SiHal₂, Hal = F, Cl, and 2-silaimidazol-2-ylidene, SiN₂H₂C₂H₂) and buta-1,3-diene have been studied using G3(MP2)//B3LYP method. Two major reaction channels, (2 + 1) and (4 + 1) cycloaddition reactions, leading to 2-vinylsiliranes and silacyclopent-3-enes, respectively, as well as [1,3]-sigmatropic rearrangements between 2-vinylsiliranes and the corresponding silacyclopent-3-enes, have been considered in detail. Reactivity of silylenes toward buta-1,3-diene decreases in the following series: SiHHal > SiHal₂ > SiN₂H₂C₂H₂, which is reflected in increase of the reaction barriers for both cycloaddition reactions and in decrease of exothermicity of the formation of the corresponding products. The (4 + 1) cycloaddition is preferable for SiHal₂ and SiN₂H₂C₂H₂ and can compete with (2 + 1) cycloaddition for SiHHal. [1,3]-Sigmatropic rearrangement is important for isomerization of 2-vinylsiliranes to the corresponding silacyclopent-3-enes for all systems studied, except the SiCl₂ system.     

Study of the pyrolysis of H2O2 in the presence of H2and CO by use of UV absorption of HO2

In dissociation experiments of H₂O₂ under shock wave conditions, the spectra of H₂O₂ and HO₂ have been observed in the UV at 2200 ≤ 2800 Å. By the use of these spectra the H₂O₂ decomposition in the presence of H₂ and CO at 870 ≤ T ≤ 1000°K has been analyzed. It was found that in this temperature range, in contrast to low temperature behavior, reactions of H atoms with H₂O₂ and with HO₂ are equally important. The rate of the reaction H + H₂O₂ ← HO₂ + H₂ was estimated in comparison with the rate of the reaction between H and HO₂. Good agreement between calculated and measured concentration profiles of HO₂ and H₂O₂ was obtained.     

Inactivation of Bacillus subtilis Spores Using Various Combinations of Ultraviolet Treatment with Addition of Hydrogen Peroxide

This study aims at comparing the inactivation of Bacillus subtilis spores by various combinations of UV treatment and hydrogen peroxide (H₂O₂) addition. The combinations included sequential (UV–H₂O₂, H₂O₂–UV) and simultaneous (UV/H₂O₂) processes. Results showed that B. subtilis spores achieved a certain inactivation effect through UV treatment. However, hardly any inactivation effect by H₂O₂ alone was observed. H₂O₂ had a significant synergetic effect when combined with UV treatment, while high irradiance and H₂O₂ concentration both favored the reaction. When treated with 0.60 mm H₂O₂ and 113.0 μW/cm² UV irradiance for 6 min, the simultaneous UV/H₂O₂ treatment showed significantly improved disinfection effect (4.13 log) compared to that of UV–H₂O₂ (3.03 log) and H₂O₂–UV (2.88 log). The relationship between the inactivation effect and the exposure time followed a typical pseudo‐first‐order kinetics model. The pseudo‐first‐order rate constants were 0.478, 0.447 and 0.634 min^?1, for the UV‐H₂O₂, H₂O₂–UV and UV/H₂O₂ processes, respectively, further confirming the optimal disinfection effect of the UV/H₂O₂ process. The disinfection could be ascribed to the OH radicals, as verified by the level of para‐chlorobenzoic acid (pCBA).     

Kinetics of decomposition of alkylammonium salts

The thermogravimetric curves of di-n-propylammonium, di-iso-propylammonium, di-n-butylammonium and di-iso-butylammonium chlorides showed similar profiles, characterized by mass loss in only one stage, corresponding to decomposition of compounds. The following thermal stability order was obtained: [Bu₂ ⁿNH₂]Cl>[Pr₂ ⁿNH₂]Cl>[Pr₂ ⁱNH₂]Cl>[Bu₂ ⁱNH₂]Cl. The values of activation energy for non-isothermal data obtained by Ozawa and Coats-Redfern integral methods were in agreement and stability order obtained by thermogravimetry were reproduced in both methods. The decomposition reactions of [Pr₂ ⁿNH₂]Cl, [Pr₂ ⁱNH₂]Cl and [Bu₂ ⁱNH₂]Cl were better described by A3 model and [Bu₂ ⁿNH₂]Cl by A2 model. This revised version was published online in August 2006 with corrections to the Cover Date.     

Solid solubility of the oxisulfides of Y, La, and Gd

The solid solubility in the systems Y₂O₂S---La₂O₂S, Y₂O₂S---Gd₂O₂S, and Gd₂O₂S---La₂O₂S has been investigated. Solid solutions of all compounds, throughout the whole composition range, were readily obtained, using coprecipitated oxalates and a polysulfide flux.     

A New Method of Preparation of Ifosfamide and Cyclophosphamide; Synthesis of Side Products

Abstract

This study focusses on the preparation of ifosfamide (1; R¹=CH₂CH₂Cl, R²=NHCH₂CH₂Cl) and cyclophosphamide (2 R¹=H, R²=N(CH₂CH₂Cl)₂), standard drugs in tumor therapy, in order to avoid the alkylating educts like 2-chloroethylamine by introducing chlorine in the final reaction step. The reaction of the trimethylsilyl compounds (3; R¹=CH₂CH₂Cl, R²=NHCH₂CH₂0SiMe₃) and (4; R¹=H, R²=N(CH₂CH₂0SiMe₃)₂), respectively, with 2-chloro- 1,3,5-trimethyl-1,3,5-triaza-σ³λ₃-2-phosphoM-4,6-dione, followed by chlorination of the resulting product with sulphuryl chloride, furnished the cytotoxic drugs (1) and (2) [l].     

钛硅分子筛催化环己酮液相氨肟化固定床工艺

采用固定床模式,研究了钛硅分子筛催化环己酮制环己酮肟液相氨肟化反应.结果表明,该工艺模式具有可行性与普适性.优化的反应条件为:温度333K,体系氨浓度>2%,酮/H₂O₂摩尔比=5,H₂O₂空速0.083h^-1.此时环己酮转化率、环己酮肟选择性、H₂O₂转化率及其有效利用率分别达18.7%,99.5%,94.7%和98.7%.进一步研究了H₂O₂在该过程中的反应行为,发现固定床工艺模式能有效提高H₂O₂的有效利用率,其主要原因是该模式有利于羟胺的生成及其进一步与酮反应生成肟.适当的空速与氨和酮的浓度是实现H₂O₂高效利用的关键因素.     

Preparation of nanocrystalline BiFeO3 and kinetics of thermal process of precursor

The Bi₂Fe₂(C₂O₄)₅·5H₂O was synthesized by solid-state reaction at low heat using Bi(NO₃)₃·5H₂O, FeSO₄·7H₂O, and Na₂C₂O₄ as raw materials. The nanocrystalline BiFeO₃ was obtained by calcining Bi₂Fe₂(C₂O₄)₅·5H₂O at 600 °C in air. The precursor and its calcined products were characterized by thermogravimetry and differential scanning calorimetry, FT-IR, X-ray powder diffraction, and vibrating sample magnetometer. The data showed that highly crystallized BiFeO₃ with hexagonal structure [space group R3c(161)] was obtained when the precursor was calcined at 600 °C in air for 1.5 h. The thermal process of the precursor in air experienced five steps which involved, at first, the dehydration of an adsorption water molecule, then dehydration of four crystal water molecules, decomposition of FeC₂O₄ into Fe₂O₃, decomposition of Bi₂(C₂O₄)₃ into Bi₂O₃, and at last, reaction of Bi₂O₃ and Fe₂O₃ into hexagonal BiFeO₃. Based on Starink equation, the values of the activation energies associated with the thermal process of Bi₂Fe₂(C₂O₄)₅·5H₂O were determined. Besides, the most probable mechanism functions and thermodynamic functions (ΔS ^≠, ΔH ^≠, and ΔG ^≠) of thermal processes of Bi₂Fe₂(C₂O₄)₅·5H₂O were also determined.     

Synthesis of CeO2 by thermal decomposition of oxalate and kinetics of thermal decomposition of precursor

CeO₂ was synthesized by calcining Ce₂(C₂O₄)₃·8H₂O above 673 K in air. The precursor and its calcined products were characterized using thermogravimetry and differential scanning calorimetry, Fourier transform infrared spectra, X-ray powder diffraction, scanning electron microscopy, and UV–Vis absorption spectroscopy. The result showed that cubic CeO₂ was obtained when the precursor was calcined above 673 K in air for 2 h. The UV–Vis absorption spectroscopy studies showed that superfine CeO₂ behaved as an excellent UV-shielding material. The thermal decomposition of the precursor in air experienced two steps, which are: first, the dehydration of eight crystal water molecules, then the decomposition of Ce₂(C₂O₄)₃ into cubic CeO₂. The values of the activation energies associated with the thermal decomposition of Ce₂(C₂O₄)₃·8H₂O were determined based on the Starink equation.     

Metallation of aliphatic carbon atoms: II,syntheses and characterization of the cyclopalladated complexes of N,N-dimethylneopentylamine

N,N-Dimethylneopentylamine reacts with Pd(MeCO₂)₂ to give a novel trinuclear cyclopalladated complex [Me₂NCH₂CMe₂CH₂Pd(μ-MeCO₂)₂Pd(μ-MeCO₂)₂PdCH₂CMe₂CH₂NMe₂]?-0.5C₆H₆ (I). The reaction of I with PPh₃ affords both trans-[Pd(MeCO₂)₂(PPh₃)₂] (II) and [Pd(CH₂CMe₂CH₂NMe₂)(MeCO₂)(PPh₃)] (III). The reaction of III with LiCl yields a mononuclear cyclopalladated complex, [Pd(CH₂CMe₂CH₂NMe₂)Cl(PPh₃)] (IV).     

FTIR spectroscopic study of the Cl- and Br-atom initiated oxidation of ethene

The reaction mechanism of the halogen (Cl and Br)-atom initiated oxidation of C₂H₄ was studied using the long path FTIR spectroscopic method in 700 torr of air at 296 ± 2 K. Among the major halogen-containing products were X? CH₂CHO, X? CH₂CH₂OH, and X? CH₂CH₂OOH (X = Cl or Br) which were shown to be formed via the self-reaction of the X? CH₂CH₂OO radicals, i.e., 2X? CH₂CH₂OO → 2X? CH₂CH₂O + O₂; (a) 2X? CH₂CH₂OO → X? CH₂CHO + X? CH₂CH₂OH + O₂ and (b) followed by X? CH₂CH₂O + O₂ → X? CH₂CHO + HO₂ and X? CH₂CH₂OO + HO₂ → X? CH₂CH₂OOH + O₂. From the observed yields of X? CH₂CHO and X? CH₂CH₂OH the branching ratios for reactions (a) and (b) were determined to be k_a/k_b = 1.35 ± 0.07(2σ) for both X = Cl and Br. In addition, the O₂-dependence of the rate constant for the Br + C₂H₄ reaction was determined by the relative rate technique as a function of O₂ partial pressure from 140 to 700 torr at 700 torr total pressure of N₂/O₂ diluent. Rate constants for the reactions of Cl-atoms with Cl-CH₂CHO and Br-atoms with Br-CH₂CHO were also determined to be [4.3 ± 0.2(2sigma;)] × 10^?11 and less than or equal to [1.83 ± 0.11(2σ)] × 10^?13 cm³ molecule^?1 s^?1, respectively.     

Studies of thermal decomposition of hydrazidocarbonates of some first row transition elements

The thermal properties of some hydrazidocarbonates of copper, Cu(N₂H₃COO)₂.0.5H₂O, nickel, Ni(N₂H₃COO)₂.2N₂H₄, and iron, Fe(N₂H₃COO)₂ and N₂H5[Fe(N₂H₃COO)₃].H₂O, were studied in an inert argon atmosphere. The TG, DTG and DSC curves for these compounds were taken. In the case of N₂H₅[Fe(N₂H₃COO)₃].H₂O, intermediates were observed and isolated during the decomposition. The end-products were metal powders oxidized to a greater or lesser degree.

---

Zusammenfassung In einer inerten Argonatmosphäre wurden die thermischen Eigenschaften einiger Hydrazidocarbonate von Kupfer, Cu(N₂H₃COO)₂.0.5H₂O, Nickel Ni(N₂H₃COO)₂.2N₂H₄ und Eisen Fe(N₂H₃COO)₂ bzw. N₂H₅[Fe(N₂H₃COO)₃].H₂O ermittelt, d.h. TG-, DTG- und DSC-Kurven wurden angefertigt. Im Falle von N₂H₅[Fe(N₂H₃COO)₃].H₂O konnten während der Zersetzung auch Zwischenprodukte beobachtet und isoliert werden. Die Endprodukte waren mehr oder weniger oxydierte Metallpulver.

---

---

Paper presented at the 6th World Conference for Thermal Analysis, Capri, 1989.

---

This work was supported by the Research Council of Slovenia.     

Regularities of formation of nanocrystalline particles in titanium subgroup dioxides

Trends in formation and evolution of nanocrystalline phases in TiO₂, ZrO₂, and HfO₂ powders were studied. The stability of metastable phases increases in the order of HfO₂ > ZrO₂ > TiO₂, and the probability of formation of thermodynamically stable phases increases in the order of TiO₂ > ZrO₂ > HfO₂. The enthalpies of formation were determined for TiO₂, ZrO₂, and HfO₂ nanocrystallites, as well as the activation energies of their subsequent growth. For TiO₂ and ZrO₂, a phenomenological model was advanced to describe nanocrystallite formation and subsequent polymorphic transformations.     

Aldol-Type Cyclization of Bisacylphosphonates. A Unique Concerted Catalytic Effect of Diamines

Abstract

Some bisacylphosphonates are biologically active in calcium related disorders, such as bone resorption and ectopic calcification.¹ In the course of our studies directed towards the preparation of stable, pharmaceutically acceptable salts of bisacylphosphonates, we found that in the presence of N,N'-dibenzylethylenediamine (benzathine), adipoylbisphosphonate (AdBP) underwent cyclization to 2-hydroxy-2-phosphonocyclopentanecarbonylphosphonic acid. Similarly, pimeloylbisphosphonate (PiBP) cyclized to 2-hydroxy-2-phosphonocyclohexanecarbonylphosphonic acid, although at a rate about 30 times slower than AdBP. Study of the catalytic effect of amines on the cyclization of PiBP revealed a striking dependence on the pH, the chain length of the diamine, and the amine used. Thus the following relative efficacy was observed for the different amines at pH 5: Me₂N(CH₂)₂NH₂ (120), H₂N(CH₂)₂NH₂ (100), H₂N(CH₂)₃NH₂ (4), H₂N(CH₂)₄NH₂ (1), PhCH₂NHCH₂CH₂NHCH₂Ph (0.1), Me₂NCH₂CH₂NMe₂ (0.02), MeNH₂ (0.02). These data show that depending on the chain length, 1,2-diamines are far more efficient catalysts than longer chain diamines and monoamines in these cyclizations. The mechanism which accommodates these results involves attack of a primary amine group on one of the keto groups, followed be removal of an alpha proton by the second amine group and the formation of an enamine. The latter then cyclizes by attacking the second keto group.     

Synthesis and1H NMR study of some organotin derivatives of diethanolamines

A number of organotin derivatives of diethanolamines (stannocanes) R₂Sn(OCH₂CH₂)₂NR', O(SiMe₂CH₂)₂Sn(OCH₂CH₂)₂NR', and Sn[(OCH₂CH₂)₂NR']₂ (R = Ph,cyclo-Hex; R' = H, Me, Ph) were synthesized and studied by¹H NMR spectroscopy. The effect of steric factors on the ability of molecules of stannocanes to form associates in solutions is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp.714–718, April, 1994.     

Reactions of carbethoxycarbene with enaminones. Formation of unexpected pyrroles

The reactions of carbethoxycarbene (:CH₂-CO₂Et, 2) with several acyclic enaminones (RCOCH=CR¹NHR², 3) lead to the unexpected formation of 2-Me, 3-CO₂Et, 4-H, 5-R¹-pyrroles 4 . Structural variations of the enaminones show that the structural fragments C(3)-CO₂Et and C(2)-Me are provided by 2 and that the fragment C(5)-R¹NHR² originates from the enaminones 3 , while the RCO group from 3 is eliminated during the course of reaction. Reactions with cyclic and nitrogen-hindered enaminones do not lead to pyrrole formation but occur by simple insertion of 2 to the Cα-H bond.     

Catalytic activities of Schiff base aquocomplexes of copper(II) towards hydrolysis of amino acid esters

Summary Solid aquo Cu^II complexes of Schiff bases derived from amino acids have been prepared and characterized. Using a pH-stat method, the kinetics of base hydrolysis of the amino acid esters H₂NCH₂CO₂Me·HCl (GE), (HO)-C₆H₄CH₂(NH₂)CO₂Me·HCl (TE), MeS(CH₂)₂CH(NH₂)-CO₂Me·HCl (ME), HSCH₂CH(NH₂)CO₂Et·HCl (CE), C₃H₃N₂CH₂CH(NH₂)CO₂Me·2HCl (HE) and [—SCH₂-CH(NH₂)CO₂Me]₂·2HCl (CysE) have been studied. The complexes enhanced the rate of hydrolysis substantially, the values of the second-order rate constants being some 10–50 times greater than those obtained in the presence of the simple Cu^II ion.     

Syntheses and spectroscopic studies of diphenylphosphinato derivatives of boron

Summary 2-Diphenylphosphinato-1,3,2-dioxaborolanes and -borinanes of the type (whereG = -CH₂CHMe-, -CH₂CH₂CH₂-, -CH₂CH₂CHMe-,-CMe₂CMe₂-, -CMe₂CH₂CHMe-,-CH₂CMe₂CH₂-, -CH₂CEt₂CH₂-, and -C₆H₄-) are obtained by the reaction of diphenylphosphinic acid with the corresponding 2,2-oxo-bis-1,3,2-dioxaborolanes and-borinanes. The products are white crystalline solids, which have sharp melting points and are hydrolytically stable. They have been characterized by elemental analysis, IR and multinuclear NMR (¹¹B,³¹P, and¹¹⁹Sn) studies. The data suggest structures with monodentate phosphinato moieties and 3-coordinated boron atoms.

---

Synthesen und spektroskopische Untersuchungen von Diphenylphosphinatoderivaten von Bor

Zusammenfassung 2-Diphenylphosphinato-1,3,2-dioxaborolane und -borinane des Typs (mitG = -CH₂CHMe-, -CH₂CH₂CH₂-,-CH₂CH₂CHMe-, -CMe₂CMe₂-,-CMe₂CH₂CHMe-, -CH₂CMe₂CH₂-, -CH₂CEt₂CH₂- und C₆H₄) erhält man durch Reaktion von Diphenylphosphinsäure mit den entsprechenden 2,2-Oxo-bis-1,3,2-dioxaborolanen und -borinanen. Die Produkte sind weiße, kristalline, hydrolyseunempfindliche Festkörper. Sie wurden mittels Elementaranalyse, IR-Spektroskopie und multinuklearer NMR-Spektroskopie (¹¹B,³¹P und¹¹⁹Sn) charakterisiert. Die Resultate legen Strukturen mit monodentaten Phosphinatoeinheiten und dreifach koordinierten Boratomen nahe.

     

Preparation and properties of complexes of chromium(II) with some oxo-anions of phosphorus(V)

Summary Complexes of chromium(II) with diphenylphosphinate, Cr(O₂PPh₂)₂ · H₂O, diphenylphosphate Cr{O₂P(OPh)₂} · 1/2H₂O, phenylphosphinate, Cr(O₂PHPh)₂ · 2H₂O, phenyl-phosphonate, Cr(O₃PPh) · H₂O, and monofluorophosphate, Cr{O₂P(OH)F}₂ · H₂O, are high-spin. From their reflectance spectra and antiferromagnetic behaviour the last three are believed to be three-dimensional polymers with R₂PO ₂ ^– bridges in which some O atoms bridge two Cr atoms, leading to magnetic interaction. The other complexes show only weak magnetic interaction, and the reflectance spectra of Cr(O₂PPh₂)₂ and its hydrate indicate that both contain planar CrO₄ units. It is therefore believed to be a linear polymer with the Cr atoms well separated by double R₂PO ₂ ^– bridges. The reflectance spectrum of Cr{O₂P(OPh)₂}₂ suggests additional weak coordination of O atoms from adjacent polymer chains.     

Heat of formation of Benzophenone Oxide

The heat of formation of benzophenone oxide, Ph₂CO₂, was measured using photoacoustic calorimetry. The enthalpy of the reaction Ph₂CN₂ + O₂ → Ph₂CO₂ + N₂ was found to be ?48.0 ±0.8 kcal mol^?1 and ΔH_f(Ph₂CN₂) was determined by measuring the reaction enthalpy for Ph₂CN₂ + EtOH → Ph₂CHOEt + N₂ (?53.6 ±1.0 kcal mol^?1). Taking ΔH_f(PhCHOEt) = ?10.6 kcal mol^?1 led to ΔH_f(Ph₂CN₂) = 99.2 ± 1.5 kcal mol^?1 and hence to ΔH_f(Ph₂CO₂) = 51.1 ± 2.0 kcal mol^?1. The results imply that the self-reaction of benzophenone oxide i.e., 2Ph₂CO₂ → 2Ph₂CO + O₂ is exothermic by ?76.0 ±4.0 kcal mol^?1.