Rubidium-conducting solid electrolytes in Rb2 ? 2xFe2 ? xVxO4 system

New solid rubidium-conducting electrolytes based on rubidium monoferrite in the system of Rb_{2 − 2x} Fe_2−x V _x O₄ are synthesized and studied. It is found that introduction of V⁵⁺ ions causes a drastic decrease in the electronic conductivity component prevalent in pure RbFeO₂ with a simultaneous increase in the ionic conductivity. The latter becomes predominant at an increase in the concentration of vanadium. The optimum compositions of the studied electrolytes feature a very high cationic rubidium conductivity (∼1.8 × 10⁻² S cm⁻¹ at 200°C, more than 10⁻¹ S cm⁻¹ at 700°C). The results are compared with the data obtained earlier for similar systems based on RbGaO₂ and RbAlO₂.     

Cation mobility in modified Li1 ? xTi2 ? xNbx(PO4)3 lithium titanium NASICON phosphates

Li_{1 − x} Ti_{2 − x} Nb _x (PO₄)₃ NASICON materials are prepared and studied by X-ray diffraction, ⁷Li and ³¹P NMR spectroscopy, and impedance spectroscopy. Vacancy mobility in Li_{1 − x} Ti_{2 − x} Nb _x (PO₄)₃ is lower than interstitial lithium mobility. Nb⁵⁺ cations with low doping levels increase cation mobility in LiTi₂(PO₄)₃. Original Russian Text ? I.Yu. Pinus, I.A. Stenina, A.I. Rebrov, N.A. Zhuravlev, A.B. Yaroslavtsev, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 8, pp. 1240–1244.     

Synthesis and X-ray diffraction study of complex oxides of the Zn2 ? x(ZraSnb)1 ? xFe2xO4 composition

A multicomponent system of complex refractory oxides of the composition Zn_{2 − x} (Zr _a Sn _b )_{1 − x} Fe_2x O₄ (a + b = 1; a: b = 1: 5, 1: 4, 1: 3, 1: 2, 1: 1, 2: 1, 3: 1, 4: 1; x = 0−1.0; Δx = 0.05) was studied by X-ray diffraction. The samples were prepared from oxides of appropriate metals by low-temperature plasma synthesis (hydrogen-oxygen flame). Two phases with wide homogeneity ranges were identified: α phase crystallized in the crystal system of inverse cubic spinel and β phase with the structure of tetragonal spinel. The phase boundaries were found. Structural data are presented for about 100 solid solutions.     

Crystal structures of La1 ? xSr2 + x(GeO4)(V1 ? xMoxO4) (x= 0?0.4) solid solutions

The phase compositions of theLaVO₄-SrMoO₄(1) and Sr₂GeO₄-SrMoO₄ (2) binary systems, which bound the Sr₂GeO₄-LaVO₄-SrMoO₄ (3) ternary system, and the LaSr₂(VO₄)(GeO₄)-Sr₂GeO₄+SrMoO₄ section (4) of system 3 are studied at subsolidus temperatures. Systems 1 and 2 consist of a mixture of the initial compounds, and the La_{1 − x} Sr_{2 + x} (GeO₄)(V_{1 − x} Mo _x O₄) (where 0 ≤ x ≤ 0.4) region of substitutional solid solutions with a palmierite structure is formed in system 3. The unit cell parameters of the solid solutions are determined. The distribution of the lanthanum and strontium cations over two positions of the cationic sublattice is described. Original Russian Text ? V.D. Zhuravlev, V.G. Zubkov, A.P. Tyutyunnik, Yu.A. Velikodnyi, N.D. Koryakin, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 1, pp. 135–137.     

Cation mobility in modified Li1 + xTi2 ? xGax(PO4)3 lithium titanium NASICON phosphates

Li_{1 +x} Ti_{2 − x} Ga _x (PO₄)₃(x= 0−0.2) NASICON double phosphates are prepared and studied by high-temperature X-ray diffraction, ⁷Li NMR spectroscopy, impedance spectroscopy, and calorimetry. Doping with Ga³⁺ cations increases cation mobility in LiTi₂(PO₄)₃. Ion conductivity, NMR spectroscopy, and calorimetry data imply the occurrence of a phase transition in LiTi₂(PO₄)₃ and in products of partial gallium-for-titanium substitution. Original Russian Text ? I.Yu. Pinus, I.V. Arkhangel’skii, N.A. Zhuravlev, A.B. Yaroslavtsev, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 8, pp. 1235–1239.     

The enthalpies of formation of Sm1 + xBa2 ? xCu3Oy substitution solid solutions

The enthalpies of reactions of Sm_{1 + x} Ba_{2 − x} Cu₃O _y substitution solid solutions (x = 0, 0.1, 0.2, 0.3, 0.7, and 0.8) with 1.07 N HCl were measured at 298.15 K in a hermetic isothermic-shell swinging calorimeter. The results and the literature data were used to calculate the standard enthalpies of their formation from simple substances and binary oxides (Δ_f H _298.15^o and Δ_ox H _298.15^o). The dependence of the enthalpy of formation on the degree of samarium substitution for barium was obtained.     

The enthalpies of formation of substitution solid solutions Pr1 + xBa2 ?xCu3Oy

The enthalpies of reactions of substitution solid solutions Pr_{1 + x} Ba_{2 − x}Cu₃O _y , where x = 0, 0.2, 0.4, 0.6, and 0.9, with 1.07 N HCl were measured at 298.15 K in a hermetic swinging isothermic-shell calorimeter. The results and the literature data were used to calculate the standard enthalpies of formation of solid solutions from the elements and oxides. The dependence of the enthalpy of solid solution formation on the degree of praseodymium substitution for barium (x) was revealed.     

Ca2-3xLa8+2x□x(SiO4)6O2的合成及其导电性能的研究

The silicate oxyapatites Ca_2-3xLa_8+2x□_x(SiO₄)₆O₂(x=0, 0.17, 0.33, 0.50, 0.67) was synthesized via a sol-gel method at low temperature. The apatite phases have been characterised by X-ray diffraction (XRD), conducting properties was studied by electrical chemistry impedance spectroscopy (EIS). The conductivity of La_9.33□_0.67(SiO₄)₆O₂ is 1.58×10^-3 S·cm^-1 at 700 ℃, it is higher about 4 270 times than that of Ca₂La₈(SiO₄)₆O₂, the activation energy is decreasing from 1.37 eV to 0.84 eV. With cation vacancies increasing,the conducting mechanism is gradually translation from a direct linear pathway free oxygen ion conduction to a curve pathway interstitial oxygen ion conduction. The electrical conductivities is almost independent of the oxygen partial pressure, this suggests that the oxyapatites exhibited almost pure O^2- ion conduction over a wide range of oxygen partial pressure.     

Ag1 ? xMg1 ? x R1 + x(MoO4)3 Ag+-conducting NASICON-like phases, where R = Al or Sc and 0 ≤ x ≤ 0.5

Ag_{1 − x} Mg_{1 − x} R_{1 + x} (MoO₄)₃ NASICON-like solid solutions, where R = Al or Sc and 0 ≤ x ≤ 0.5, were prepared; their crystal lattice parameters and thermal stabilities were determined. Silver-ion conductivity was measured, and conductivity activation energy values were calculated for various temperature ranges. Above 400°C, Ag_{1 − x} Mg_{1 − x} R_{1 + x} (MoO₄)₃ phases have ionic conductivities comparable to the conductivities of sodium-ion and lithium-ion NASICON-like conductors. The conductivity increases as the tervalent cation radius increases or the amount of mobile silver ions increases.     

Li+/H+ ion exchange in Li3 ? 2xNbxM2 ? x(PO4)3 (M = In, Fe) materials with a NASICON structure

H_{3 − 2x} Nb _x M_{2 − x} (PO₄)₃ (M = In, Fe) acid phosphates have been obtained by ion exchange from their lithium forms and X-ray powder diffraction, impedance measurements, and ⁷Li and ¹H NMR spectroscopy. The parameters of the hexagonal unit cell of the proton-exchanged forms differ only slightly from those of the initial lithium compounds. According to ¹H NMR data, the proton in the acid phosphates is not hydrated. The conductivity of the acid phosphates at high temperatures depends weakly on their composition and is ∼1.7 × 10⁻⁷ S cm⁻¹ at 620 K. The activation energy of conduction is 30–33 kJ/mol (430–770 K).     

Synthesis and study of the variable-composition phase Na1?xCo1?xFe1+x(MoO4)3, 0 ≤ x ≤ 0.4, with nasicon structure

The synthesis conditions for variable-composition phase Na_1−x Co_1−x Fe_1+x (MoO₄)₃, 0 ≤ x ≤ 0.4, crystallizing in the nasicon structure type (R $ \bar 3 $ \bar 3 c) were examined. For this phase, the crystallographic parameters were calculated, vibrational spectra were interpreted, and temperature dependence of electrical conductivity, dielectric constant, and dielectric loss tangent were examined.     

Synthesis and study of the properties of K2Y1 ? x ? yEuxTby(MoO4)(PO4) and K2Y1 ? x ? yEuxTby(MoO4)(PO4)1?δ(VO4)δ solid solutions

Al synthesized samples are isostructural and crystallize in the orthorhombic symmetry system, space group Ibca. Particles of the final product of ∼200 nm in size have been obtained. The introduction of the vanadate anion into the matrix composition leads to the lowering of the symmetry of the Eu³⁺ environment and to the rise of the defect luminescence at 450–550 nm because of the unit cell distortion. The luminescence of defects in terbium-europium-containing samples is determined by the sample surface area, which decreases on annealing. The τ, W ₀ and γ parameters of the luminescence kinetics of the samples have been determined.     

Ca0.8-2x(YbxTb0.1Na0.1+x)2xWO4近红外下转换荧光粉水热合成及发光性质

一种在近红外光谱(NIR)区域高效的量子剪裁现象已在Ca_0.8-2x(Yb_xTb_0.1Na_0.1+x)_2xWO₄(x=0~0.2)荧光粉中得到证实,该量子剪裁通过吸收紫外线光子发射近红外光子,能量传递包括两个协同过程,分别是WO₄^2-基团到Yb³⁺离子和WO₄^2-基团到Tb³⁺离子再到Yb³⁺离子,Yb³⁺离子的掺杂浓度对荧光粉在可见光和近红外光谱的发光,荧光寿命和量子效率的影响已进行了详细得研究。经计算,量子效率最大达到135.7%。铽与镱共掺钨酸钙的近红外量子剪裁,通过吸收太阳光谱的1个紫外光到2个1000nm光子(2倍光子数增加)的下转化机制实现高效率硅太阳能电池的途径。     

Phase transitions and ion transport in NASICON materials of composition Li1 + xZr2 ? xInx(PO4)3(x = 0–1)

NASICON materials of composition Li_{1 + x} Zr_{2 − x} In _x (PO₄)₃(x = 0–1) were synthesized. The phase constitution, particle size, and conductivity of these materials were studied as s function of synthesis temperature. High-temperature X-ray powder diffraction was used to study phase transitions in the materials synthesized. Low levels (x ≤ 0.1) partial substitution of indium for zirconium considerably increase the lithium ion conductivity and reduce the activation energy for conduction compared to the parent compound.     

Ionic conductivity in the BaZr1 ? xYxO3 ? δ system (x = 0.02–0.2) in H2/H2O and D2/D2O atmospheres

Proton and deuteron conductivities in the BaZr_{1 − x} Y _x O_{3 − δ} system (x = 0.02–0.2) are investigated experimentally over the temperature range 600–900°C in reducing H₂/H₂O and D₂/D₂O atmospheres with pH₂O = pD₂O = 3.15 kPa.     

Ca0.8-2x(YbxTb0.1Na0.1+x)2xWO4近红外下转换荧光粉水热合成及发光性质

一种在近红外光谱(NIR)区域高效的量子剪裁现象已在Ca0.8-2x(Ybx Tb0.1Na0.1+x)2x WO4(x=0～0.2)荧光粉中得到证实,该量子剪裁通过吸收紫外线光子发射近红外光子,能量传递包括两个协同过程,分别是WO42-基团到Yb3+离子和WO42-基团到Tb3+离子再到Yb3+离子,Yb3+离子的掺杂浓度对荧光粉在可见光和近红外光谱的发光,荧光寿命和量子效率的影响已进行了详细的研究。经计算,量子效率最大达到135.7%。铽与镱共掺钨酸钙的近红外量子剪裁,通过吸收太阳光谱的1个紫外光子到2个1 000 nm光子(2倍光子数增加)的下转化机制实现高效率硅太阳能电池的途径。     

Dehydrogenation of butyl alcohols on NASICON-type solid electrolytes of Na1 ? 2xCuxZr2(PO4)3 composition

Characteristics of the catalytic activity in the dehydration of butanols of copper-containing sodium-zirconium-phosphates (NZPs), in which Na⁺ ions substitute for Cu²⁺ ions are obtained. It was found that in the 100–370°C region, the action energy of the reaction falls upon the transition through temperature T* ∼ 300°C, above which the electrophysical and crystallographic properties of phosphates change. The observed dependences are explained by the center (which consists of copper with various positions in the phosphate network at T < T* and T > T*) taking part in the formation of carbonyl compounds. This indicates the presence of a ligand effect, i.e., to structural sensitivity of the dehydration reaction in the case of Cu-NZP catalysts.     

Region of homogeneity for Lu2 ? xMnxO3 ± δ solid solution in air

The solubility boundaries for Lu₂O₃ and Mn₃O₄ oxides and LuMn₂O₅ manganate in LuMnO_{3 ± δ} are determined on the basis of an X-ray phase analysis of homogeneous solid solutions and heterogeneous compositions with molecular formula Lu_{2 − x} Mn _x O_{3 ± δ} (0.90 ≤ x ≤ 1.16; Δx = 0.02) obtained by ceramic synthesis in air in a temperature range of 900–1400°C. It is found that the solubility of Lu₂O₃ in LuMnO_{3 ± δ} corresponds to the composition of Lu_1.03Mn_0.97O_{3 ± δ} and remains invariable over the investigated range of temperatures, while the solubility of Mn₃O₄ (which corresponds to the composition of Lu_0.91Mn_1.09O_{3 ± δ}) remains invariable in the temperature range of 995–1400°C. It is shown that lutetium manganate LuMn₂O₅ coexists with lutetium manganate LuMnO_{3 ± δ} at temperatures of less than 995°C in air, and its solubility in LuMnO_{3 ± δ} decreases as the temperature of 995°C (corresponding to the composition Lu_0.91Mn_1.09O_{3 ± δ}) falls to 900°C for Lu_0.97Mn_1.03O_{3 ± δ}.     

Synthesis and thermal characterization of NZP compounds Na1?xLixZr2(PO4)3 (x?=?0.00–0.75)

Sodium zirconium phosphate (NZP) composition Na_1−x Li _x Zr₂(PO₄)₃, x = 0.00–0.75 has been synthesized by method of solid state reaction method from Na₂CO₃·H₂O, Li₂CO₃, ZrO₂, and NH₄H₂PO₄, sintering at 1050–1250 °C for 8 h only in other to determine the effect on thermal properties, such as the phase formation of the compound. The materials have been characterized by TGA and DTA thermal analysis methods from room temperature to 1000 °C. It was observed that the increase in lithium content of the samples increased thermal stability of the samples and the DTA peaks shifted towards higher temperatures with increase in lithium content. The thermal stability regions for all the sample was observed to be from 640 °C. The sample with the highest lithium content, x = 0.75, exhibited the greatest thermal stability over the temperature range.     

Synthesis, crystal and electronic structures, and thermodynamic characteristics of BaCe1 ? xInxO3 ? x/2 solid solutions

New perovskite oxide phases BaCe_{1 − x} In _x O_{3 − x/2} (x = 0.1–0.8) (space group Pbnm) have been synthesized. The unit cell volume of the resulting solid solutions monotonically decreases with an increase in the degree of substitution of indium for cerium due to the contraction of octahedra in perovskite blocks. The thermodynamic stability of the compound BaCe_0.75In_0.25O_2.875 was studied by the solution calorimetry method, and barium cerates were shown to be thermodynamically stable with respect to binary oxides at room temperature. The structure of occupied and vacant states in BaCe_{1 − x} In _x O_{3 − x/2} was determined on the basis of X-ray emission, absorption, and photoelectron spectra, and the energy gap was estimated at ∼2 eV.