Phonetographic profiles and F0-SPL characteristics of untrained versus trained vocal groups

The phonetogram has been recommended as an international tool for voice analysis. However, the capability of this technique to distinguish between different vocal groups has not been clearly established. The purpose of this study was to examine untrained versus trained vocalists using the phonetogram and the fundamental frequency by intensity (F₀/SPL) information derived through that method. In this study, “musical” or “controlled” ranges of phonation were stressed rather than “physiological” ranges. Results indicated that (a) characteristic phonetographic profiles may be established for untrained versus trained vocalists, and (b) trained vocalists show significantly increased capability in terms of F₀ range and maximum, minimum, and comfortable SPL production. Elicitation of “controlled” phonations may be the key to revealing the underlying vocal capabilities of seemingly different vocal groups.     

Vocal Behavior and Vocal Loading Factors for Preschool Teachers at Work Studied with Binaural DAT Recordings

Preschool teachers are at risk for developing voice problems such as vocal fatigue and vocal nodules. The purpose of this report was to study preschool teachers' voice use during work. Ten healthy female preschool teachers working at daycare centers (DCC) served as subjects. A binaural recording technique was used. Two microphones were placed on both sides of the subject's head, at equal distance from the mouth, and a portable DAT recorder was attached to the subject's waist. Recordings were made of a standard reading passage before work (baseline) and of spontaneous speech during work. The recording technique allowed separate analyses of the level of the background noise, and of the subjects' voice sound pressure level, mean fundamental frequency, and total phonation time. Among the results, mean background noise level for the ten DCCs was 76.1 dBA (range 73.0-78.2), which is more than 20 dB higher than what is recommended where speech communication is important (50-55 dBA). The subjects spoke on an average of 9.1 dB louder (p < 0.0001), and with higher mean fundamental frequency (247 Hz) during work as compared to the baseline (202 Hz) (p < 0.0001). Mean phonation time for the group was 17%, which was considered high. It was concluded that preschool teachers do have a highly vocally demanding profession. Important steps to reduce the vocal loading for this occupation would be to decrease the background noise levels and include pauses so that preschool teachers can rest their voices.     

Time-of-day effects on voice range profile performance in young, vocally untrained adult females

Time-of-day effects on voice range profile performance were investigated in 20 vocally healthy untrained women between the ages of 18 and 35 years. Each subject produced two complete voice range profiles: one in the morning and one in the evening, about 36 hours apart. The order of morning and evening trials was counterbalanced across subjects. Dependent variables were (1) average minimum and average maximum intensity, (2) Voice range profile area and (3) center of gravity (median semitone pitch and median intensity). In this study, the results failed to reveal any clear evidence of time-of-day effects on voice range profile performance, for any of the dependent variables. However, a reliable interaction of time-of-day and trial order was obtained for average minimum intensity. Investigation of other subject populations, in particular trained vocalists or those with laryngeal lesions, is required for any generalization of the results.     

Relationship between changes in voice pitch and loudness

Changes in mean fundamental frequency accompanying changes in loudness of phonation are analyzed in 9 professional singers, 9 nonsingers, and 10 male and 10 female patients suffering from vocal functional dysfunction. The subjects read discursive texts with noise in earphones, and some also at voluntarily varied vocal loudness. The healthy subjects phonated as softly and as loudly as possible at various fundamental frequencies throughout their pitch ranges, and the resulting mean phonetograms are compared. Mean pitch was found to increase by about half-semitones per decibel sound level. Grossly, the subject groups gave similar results, although the singers changed voice pitch more than the nonsingers. The voice pitch changes may be explained as passive results of changes of subglottal pressure required for the sound level variation.     

Vocal loudness and frequency capabilities of the voice

A phonetogram is a graph showing the sound pressure level (SPL) of softest and loudest phonation over the entire fundamental frequency range of a voice. A physiological interpretation of a phonetogram is facilitated if the SPL is measured with a flat frequency curve and if the vowel /a/ is used. It was found that in soft phonation, the SPL is mainly dependent on the amplitude of the fundamental, while in loud phonation, the SPL is mainly determined by overtones. The short-term SPL variation, i.e., the level variation within a tone, was about 5 dB in soft phonation and close to 2 dB in loud phonation. For two normal voices the long-term SPL variation, calculated as the mean standard deviation of SPL for day-to-day variation, was found to be between 2.4 and 3.4 dB in soft and loud phonation. Speakers who raise their loudness of phonation also tend to raise their mean voice fundamental frequency. Measures obtained from speaking at various voice levels were combined so that typical pathways could be introduced into the phonetogram. The average slope of these pathways was 0.3–0.5 st/dB for healthy subjects. Averaged phonetograms for male singers and male nonsingers did not differ significantly, but averaged phonetograms for female singers and female nonsingers did, in that the upper contour was higher for the female singers. Averaged phonetograms for female patients with non-organic dysphonia showed significantly lower SPL values in loudest phonation as compared to healthy female subjects, while no corresponding difference was seen for males in this regard. With respect to the SPL values for softest phonation, male dysphonic patients showed significantly higher SPL values than healthy male subjects, while no corresponding difference was seen in female subjects. The subglottal pressure mirrored these phonetogram differences between healthy and pathological voices. The averaged phonetograms of female patients after voice therapy showed an increased similarity with those of normal voices. For the male patients the averaged phonetogram did not change significantly after therapy.     

Data on subglottal pressure and SPL at varied vocalloudness and pitch in 8- to 11-year-old children

Phonation threshold pressure has been defined as the minimum subglottalpressure to generate phonation. Previous research has indicated that children may habitually employ higher subglottal pressures than adults. In the present investigation sound pressure level (SPL) and subglottal pressures at different pitch levels were measured at and above phonation threshold in nine children. Phonation threshold values were scattered in reasonable agreement with Titzes' prediction, although a discrepancy was noted regarding the frequency dependence in some voices. At normal conversational loudness and loudest level of phonation the children's PS values were between two to four and four to eight times the predicted threshold values, respectively. At normal conversational loudness and habitual pitch subglottal pressures were lower than those previously observed for children, but similar to those found for female adults. The SPL in softest and loudest phonation were somewhat lower as compared to previous phonetogram data for children and for female adults. At normal loudness and habitual pitch the SPL values were similar to those of female adults. For a doubling of P_s mean SPL increased by 10.5 dB on the average.     

Changes in the Prevalence of Vocal Symptoms Among Teachers During a Twelve-Year Period

Vocal symptoms and voice disorders among teachers were studied in 1988 using a questionnaire designed to obtain information on six vocal symptoms that had appeared during the past 2 years. Twelve percent of the 478 respondents reported vocal symptoms occurring weekly or more often. The study was repeated using the same questionnaire in 2001. The results of this second study (n=241) indicate that vocal symptoms had increased considerably. Twenty-nine percent of the teachers reported symptoms occurring weekly or more often, and 20% reported two symptoms or more occurring at least once a week, which is significantly more than in 1988. Accordingly, voice disorders are probably a growing problem among teachers. Several factors may explain these increases. In 2001, the teachers complained more often about increases in the size of their classes. Factors that disturbed normal work routines, such as noisy or misbehaving pupils, had also increased significantly. A growing number of misbehaving pupils probably cause increased background noise and stress and, thus, increase the vocal symptoms in teachers.     

Effects of prolonged oral reading on F0, SPL, subglottal pressure and amplitude characteristics of glottal flow waveforms

The effects of prolonged (5x45 minute) reading (vocal loading) on fundamental frequency (F0), sound pressure level (SPL), subglottal (intraroral) pressure (p), and two glottal flow waveform parameters (AC amplitude of glottal flow, f, and negative peak amplitude of differentiated flow (d) of normal female and male subjects (N = 80) were studied. Two rest (morning and noon) and three loading (two in the morning and one in the afternoon) samples were recorded and analyzed. The glottal waveforms were obtained by inverse filtering of the acoustic pressure waveforms of speaking voice samples. The analyses were based on measurement and inverse filtering of the first stressed syllable of "paappa" words repeated 3x5 times for normal, as soft as possible, and as loud as possible phonation. In normal phonation the parameter values changed statistically significantly due to loading. In many cases the values obtained in the morning samples changed after the first loading session. This is interpreted as a vocal "warming-up effect." Especially in soft phonation p, d, and f were sensitive indicators of vocal loading. In both normal and soft phonation, the SPL, p, d, and f values tended to rise due to prolonged reading in the morning and afternoon samples, indicating increased effort (normal phonation) and a rise in the phonatory threshold (soft phonation). The lunch break vocal rest ("rest effect") considerably affected the parameter values in many cases.     

一种铷原子频标频率综合器新方案的设计与实现

数字化和小型化是铷原子频标（RAFS）发展的重要方向．在传统铷原子频标电路中,6 840 MHz微波信号与频率综合器产生的5.312 5 MHz信号进行混频,得到用于激励铷原子跃迁的6 834.687 5 MHz微波探寻信号．早期铷频标的频率综合器大量使用了分立的模拟器件,数字化程度低、参数优化工作繁杂、电路体积较大．目前常用直接数字频率合成器（DDS）方案直接产生5.312 5 MHz信号,但这种数字电路方案通常需要对10 MHz信号进行倍频,它存在频谱纯度较低、相位噪声高等缺点．本文介绍一种产生5.312 5 MHz信号的频率综合器解决方案,这种设计方案在应用DDS器件时无需使用10 MHz倍频电路,它具有频谱纯度较高、相位噪声低、输出频率和相位可调等优点．     

Conceptual Design Study of a Novel Gyrotron for NMR/DNP Spectroscopy

In this paper we present some initial results from a conceptual design study focused on the development of a novel frequency tunable gyrotron for nuclear magnetic resonance (NMR) spectroscopy with signal enhancement based on the utilization of high field radiation and dynamic nuclear polarization (DNP) technique. The first variants of both the electron optical system and the resonant cavity which have been designed aiming continuous frequency tunability in a broad frequency band are presented and discussed. The selected method for frequency tunability is based on the excitation of higher order axial modes and smooth transition between them. It was selected after a critical examination of the known theoretical and practical results related to the frequency control in gyrotrons. It is believed that the current conceptual design is an appropriate basis for development of the next (optimized) design which will include also a detailed design of other components (mode converter, output window etc.) and magnetic circuit (superconducting magnet and supplementary solenoids) as well as for the overall mechanical design and fabrication of the prospective gyrotron.     

Reduction of low‐frequency noise in multilayer MoS2 FETs using a Fermi‐level depinning layer

Two‐dimensional transition metal dichalcogenides (TMDCs) are potential candidate materials for future thin‐film field effect transistors (FETs). However, many aspects of this device must be optimized for practical applications. In addition, low‐frequency noise that limits the design window of electronic devices, in general, must be minimized for TMD‐based FETs. In this study, the low‐frequency noise characteristics of multilayer molybdenum disulphide (MoS₂) FETs were investigated in detail, with two different contact structures: titanium (Ti) metal–MoS₂ channel and Ti metal–TiO₂ interlayer–MoS₂ channel. The results showed that the noise level of the device with a TiO₂ interlayer reduced by one order of magnitude compared with the device without the TiO₂ interlayer. This substantial improvement in the noise characteristics could be explained using the carrier number of fluctuation model. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Converting the UK calculation of road traffic noise (CORTN) to a model capable of calculating LAeq,1h for the Tehran’s roads

This paper describes the methodology through which the UK calculation of road traffic noise (CORTN) has been converted to the algorithms that are able to calculate hourly A-weighted equivalent sound pressure level (L_Aeq,1h) for the Tehran’s roads. The methodology adopts two different approaches to model calibration and performance test through the holdout validation method on the basis of the database including 52 samples taken from 52 sampling stations located alongside 5 roads of Tehran at distances less than 4 m from the nearside carriageway edge. As to the CORTN manual the distances less than 4 m are considered to be equal to 4 m. In the first approach the model is calibrated through carrying out nonlinear regression parameter estimation using 50% of samples to replace the basic noise level parameters with the new ones that are presumably able to satisfy the objective of the study with an acceptable fitness of the model. In the second approach the model calibration is carried out on the basis of 30 measurements taken from 2 roads. In the next step the other subsets of samples are introduced into the calibrated equations to conduct the performance test. Non parametric goodness of fit tests, i.e. two related samples Wilcoxon and two independent samples Kolmogorov-Smirnov, respectively conducted for the calibration and the performance test steps; indicate satisfactory results for both approaches.     

Nanocomposite of polypyrrole and alumina nanoparticles as a coating filler for the corrosion protection of aluminium alloy 2024-T3

Aluminium (Al) alloys such as 2024-T3 are widely used in industry as low weight construction materials with excellent mechanical properties. Until recently corrosion protection of Al alloys was carried out with coatings containing hexavalent chromium (Cr⁶⁺). However, Cr⁶⁺ is a health and environmental hazard and has to be replaced. Intrinsically conducting polymer (ICP) technology is the promising alternative to chromate coating technology because of good corrosion protection properties of ICPs, their moderate cost and good environmental compatibility. In this paper we report successful attempt of making nanocomposite comprised of alumina nanoparticles modified by polypyrrole for the purpose of corrosion protection of Al alloy. Modified nanoparticles were used as coating filler. Coating was designated to perform as an active barrier to electrolyte diffusion. Properties of the coating were examined by adhesion test, electrochemical impedance spectroscopy, X-rays elemental analysis, scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy.     

Static dissolution rate of tungsten film versus chemical adjustments of a reused slurry for chemical mechanical polishing

Tungsten is widely used as deposited layer for the multi-level interconnection structures of wafers. The chemical composition of abrasive slurry plays an important role in chemical mechanical polishing (CMP) process. Removal of tungsten is driven by complex oxidation mechanisms between slurry components. The slurry for tungsten CMP generally contains oxidizer, iron catalyst, complexing agents and stabilizers in a pH adjusted solution of abrasive particles. Interaction between iron complex and H₂O₂ in the slurry is the main factor governing the chemical mode of material removal, oxidation potencies and kinetics.In this study, we investigate the effects of chemical additives in silica (SiO₂)-based slurry on the removal rate of the tungsten film. Experiments were carried out in static batch as a preliminary study to understand and optimize chemical mechanisms in CMP-Tungsten process. Experiment designs were conducted to understand the influence of the chemical additives on the main performances of W-CMP. Used slurry, concentrated and retreated with chemical adjustments, is compared to the original slurry as a reference.