Fabrication of PDLC films based on acrylic monomers and study of the electric field effect on the alignment structure of liquid crystal droplets in PDLC films

Polymer Dispersed Liquid Crystal (PDLC) films are prepared by the polymerization induced method of phase separation. Initial configurations of the director of liquid crystal droplets inside the films are found using a polarized microscope. The effect of an electric field on the alignment structure of droplets is studied. Two mechanisms of droplet orientation by the electric field are determined as smooth and spontaneous. The processes observed are compared with the results of electro-optical studies.     

Electro-optical properties of a PDLC based on unsaturated polyester resin

An electro-optical characterisation of a polymer-dispersed liquid crystal (PDLC) based on unsaturated polyester (UP) resin, recently prepared in our laboratory, is presented. Transmittance and response times as a function of an electric field applied to the sample, have been measured taking into account also the morphological aspects of various samples. The experimental results confirm the theoretical data previously calculated on the base of the dimensions of the liquid-crystal droplets inside the polymeric matrix. Our analysis on this new material suggests the possibility of employing such a PDLC to realise electro-optical devices. Received: 9 October 1998 / Revised version: 12 May 1999 / Published online: 21 January 2000     

Laser beam manipulation by composite material electro-optic devices

Liquid crystals are anisotropic materials whose optical properties can be easily controlled applying an electric field. For this reason, they are widely used in electro-optical devices. Besides other applications, liquid crystals electro-optical devices are suitable for laser beam manipulation. In this paper, we present some devices developed or studied in our laboratory: a twisted nematic liquid crystal (TN-LC) polarization rotator, a TN-LC protected light sensor, a polymer dispersed liquid crystal (PDLC) light modulator, a PDLC optoelectronic polarizer and a polymer liquid crystal (PoLiCryst) light modulator.     

Water droplets in a spherically confined nematic solvent: A numerical investigation

Recently, it was observed that water droplets suspended in a nematic liquid crystal form linear chains [Poulin et al., Science 275, 1770 (1997)]. The chaining occurs, e.g., in a large nematic drop with homeotropic boundary conditions at all the surfaces. Between each pair of water droplets a point defect in the liquid crystalline order was found in accordance with topological constraints. This point defect causes a repulsion between the water droplets. In our numerical investigation we limit ourselves to a chain of two droplets. For such a complex geometry we use the method of finite elements to minimize the Frank free energy. We confirm an experimental observation that the distance d of the point defect from the surface of a water droplet scales with the radius r of the droplet like .When the water droplets are moved apart, we find that the point defect does not stay in the middle between the droplets, but rather forms a dipole with one of them. This confirms a theoretical model for the chaining. Analogies to a second order phase transition are drawn. We also find the dipole when one water droplet is suspended in a bipolar nematic drop with two boojums, i.e., surface defects at the outer boundary. Finally, we present a configuration where two droplets repel each other without a defect between them. Received 11 December 1998     

Magneto-optical study of the orientation confinement of particles in ferrolyotropic systems

Ferrosmectics and ferrohexagonals are magnetic liquid crystals which consist of a lamellar and a hexagonal phase in which magnetic nanoparticles are incorporated. The magnetic field variation and the relaxation of the linear optical birefringence of ferrosmectics and ferrohexagonals and its time relaxation are measured in different geometries and compared with that of a ferrofluid sample. We interpret our data by the existence of a mean orientation of the magnetic particles in the lyotropic structure, which appears to be non-random in zero field. We conclude that the magnetic moments of the particles are preferentially aligned in the plane of the ferrosmectic layers and along the axis of the ferrohexagonal cylinders, respectively. To account for this preferred alignment, we propose that some of the particles in the ferrosmectic are adsorbed on the surfactant layers with their moment aligned in the lamellar plane, while the orientation of the moments in the ferrohexagonal is restricted to a cone around the cylinder axis. Received 31 December 1998 and Received in final form 22 September 1999     

Small-angle light scattering from polymer-dispersed liquid-crystal films

A method is developed for modeling and computing the angular distribution of light scattered forward from a single-layer polymer-dispersed liquid-crystal (PDLC) film. The method is based on effective-medium approximation, anomalous diffraction approximation, and far-field single-scattering approximation. The angular distribution of forward-scattered light is analyzed for PDLC films with droplet size larger than the optical wavelength. The method can be used to study field-and temperature-induced phase transitions in LC droplets with cylindrical symmetry by measuring polarized scattered light intensity.     

应变液晶的负压光效应和反式压光效应

介绍聚合物分散液晶和应变液晶概念,给出聚合物分散液晶调光玻璃的"正压光效应"、"负压光效应"和"反式压光效应"三种效应定义.实验制备出负压光效应和反式压光效应新型应变调光玻璃样品,测试样品散射态雾度90%以上,半透明态透光率接近30%.用偏光显微术研究压光效应原理,表明对样品施加垂面按压或拉伸的应力诱导作用会引起液晶微滴中液晶分子具有某些特殊排列方式,导致样品光学性质发生显著变化.建立垂面拉伸液晶微滴模型,计算模拟所绘出的图形与偏光显微镜照片独特花样十分相似,进而合理解释了实验现象.应变液晶压光效应研究具有聚合物分散液晶基础研究意义和开发非电控调光玻璃的实际应用价值.     

电光调制2×490°相移空间光学桥接器

基于LiNbO3晶体的双折射和电光效应设计制作了一种2×4的90°相移自由空间光学桥接器。该桥接器利用晶体的双折射效应进行信号光和本振光的分光/耦合,电光效应引入相位调制,在给定电场条件下实现2×4 90°空间光学桥接器的功能。对空间光学桥接器进行了实验测量和分析。实验结果表明该桥接器性能良好,相位连续可调,相位误差可通过电压调制补偿,应用于相干接收系统。     

Study on the algorithm of computational ghost imaging based on discrete fourier transform measurement matrix

We have developed a model and realized an algorithm for the calculation of the coefficient of coherent (direct) transmission of light through a layer of liquid crystal (LC) droplets in a polymer matrix. The model is based on the Hulst anomalous diffraction approximation for describing the scattering by an individual particle and the Foldy-Twersky approximation for a coherent field. It allows one to investigate polymer dispersed LC (PDLC) materials with homogeneous and inhomogeneous interphase surface anchoring on the droplet surface. In order to calculate the configuration of the field of the local director in the droplet, the relaxation method of solving the problem of minimization of the free energy volume density has been used. We have verified the model by comparison with experiment under the inverse regime of the ionic modification of the LC-polymer interphase boundary. The model makes it possible to solve problems of optimization of the optical response of PDLC films in relation to their thickness and optical characteristics of the polymer matrix, sizes, polydispersity, concentration, and anisometry parameters of droplets. Based on this model, we have proposed a technique for estimating the size of LC droplets from the data on the dependence of the transmission coefficient on the applied voltage.     

Small-angle light scattering symmetry breaking in polymer-dispersed liquid crystal films with inhomogeneous electrically controlled interface anchoring

We have described the method of analyzing and reporting on the results of calculation of the small-angle structure of radiation scattered by a polymer-dispersed liquid crystal film with electrically controlled interfacial anchoring. The method is based on the interference approximation of the wave scattering theory and the hard disk model. Scattering from an individual liquid crystal droplet has been described using the anomalous diffraction approximation extended to the case of droplets with uniform and nonuniform interface anchoring at the droplet–polymer boundary. The director field structure in an individual droplet is determined from the solution of the problem of minimizing the volume density of the free energy. The electrooptical effect of symmetry breaking in the angular distribution of scattered radiation has been analyzed. This effect means that the intensities of radiation scattered within angles +θ _s and–θ _s relative to the direction of illumination in the scattering plane can be different. The effect is of the interference origin and is associated with asymmetry of the phase shift of the wavefront of an incident wave from individual parts of the droplet, which appears due to asymmetry of the director field structure in the droplet, caused by nonuniform anchoring of liquid crystal molecules with the polymer on its surface. This effect is analyzed in the case of normal illumination of the film depending on the interfacial anchoring at the liquid crystal–polymer interface, the orientation of the optical axes of droplets, their concentration, sizes, anisometry, and polydispersity.     

晶体的双参量调制及其应用

利用折射率椭球分析法,分析了某些具有多重光学效应的光学晶体在两个外场同时作用下的一些特有调制规律.结果表明,当晶体的折射率椭球方程的三个交叉项中只有一项x1x2不为零时,可以得到其外场诱导新主轴折射率及其主轴取向的简单计算式.据此可以揭示出某些晶体在两个外加电场同时作用下将具有双横向电光Pockels效应,例如ˉ6点群的电光晶体.但一般晶体在双横向应力作用下不具有与双横向电光效应类似的调制特性,其弹光双折射大小与其应力差成正比,其双折射主轴方向一般为固定值.在相互垂直的外加应力和电场同时作用下,某些晶体(例如ˉ43m点群晶体)的双折射大小与外加应力和外加电场的加权几何平均值成正比,且新折射率主轴旋转角由外加应力和外加电场的比值来确定.晶体的上述双参量调制特性对设计新型光学调制器或传感器具有重要指导意义.     

Electro-optical properties of dielectric liquid microlens

We report the electro-optical properties of dielectric liquid droplets based on dielectrophoretic effect. Due to dielectric force, the surface of each droplet can be reshaped which in turn alters its focusing behaviors. Our experimental results show that a deformed droplet can recover to its original shape with a negligible hysteresis. Both amplitude and frequency of the applied voltage play important roles affecting the droplet's shape change. The rise time is mainly governed by the applied voltage: for a given frequency a higher voltage results in a faster rise time. On the other hand, the decay time is jointly determined by the interfacial surface tensions, droplet size, and viscosity of the employed liquids.     

Polarization of light transmitted through a polymer film with nanosized droplets of liquid crystal

A method is developed for analyzing the state of polarization of a plane wave transmitted through a polymer-dispersed liquid-crystal (PDLC) film with nanosized liquid-crystal (LC) droplets. This method is based on the anisotropic-dipole approximation for describing scattering by a separate droplet and on the Foldy-Twersky approximation for describing propagation of light in a film. Equations are obtained that relate the ellipsometric parameters of coherent (direct) light transmitted through a PDLC film to the order parameters that characterize the morphological and structural properties of the film. Elliptic and circular polarizations and the rotation of the plane of polarization of a wave transmitted through a film are investigated under the normal illumination of the PDLC film by a linearly polarized plane wave. The order parameters of the PDLC film are determined as a function of a control field under the transition from a partially ordered structure of optical axes of LC droplets to a homeotropic structure.     

Preparation and characterization of polymer-dispersed liquid crystal (PDLC) with different cation exchange capacity (CEC) clays

This work describes the morphology and electro-optical properties of polymer-dispersed liquid crystals (PDLCs). These composites consist of the nematic liquid crystal E7, filled with different types of inorganic nanoparticles in Norland optical adhesive (NOA65) polymer matrices. Natural clays CL120 (trade name: CN-C34 with higher cation exchange capacity CEC) and CL42 (trade name: PK802 with lower CEC) are used as various inorganic nanofillers. Wide angle X-ray diffraction was exploited to examine the dispersion of the inorganic nanoparticles in PDLCs. The morphology of liquid crystal droplets in PDLCs is investigated by the field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM) as well. Transmittance vs. applied voltage is measured to study the electro-optical properties and the response times of the PDLCs. It is suggested that doping with inorganic nanoparticles in PDLCs effectively reduces the driving voltage and improves the electro-optical characteristics.     

Edison revisited: Electro mechanical effects in wet porous materials

Edison discovered that the coefficient of friction between a metallic plate and a porous material moistened with a dilute electrolyte could be modulated by an electric field. In experiments on the same kind of contacts (clays or chalks on carbon or metals) but without continuous tangential relative motion we measure two electro-mechanical effects at frequencies of the order of 10 kHz. An alternating field induces an alternating normal force between the porous material and the conducting base. The force is lagging by versus the field. A forced normal relative motion induces through the contact a current nearly in phase with the motion. For an explanation we start from Helmholtz theory of stationary electrophoretic phenomena. We present a model in which liquid motions obey the Helmholtz laws. It explains decently the phase relations between causes and effects, and approximately the values of the effects. In optical experiments on contacts between a wet clay and the transparent conducting coating of a glass plate we measure in the frequency range 1-100 kHz a modulation of reflecting power induced by an alternating potential. The decrease of reflecting power is lagging by an angle close to behind the field. We think the modulation observed is induced by a modulation of the amount of liquid in the film present between glass and clay. In friction experiments this alternating liquid lubrication acting exclusively at the very places where friction occurs may have significant effect. Received: 22 July 1997 / Revised: 21 October 1997 / Accepted: 21 November 1997     

The effects of external applied voltage on the nonlinear refractive index and the birefringence of a dye-doped nematic mixture

The nonlinear refractive index, n₂, and the birefringence, Δn, of a nematic liquid crystal mixture (denoted as 1294-1b) doped with a anthraquinone derivative (denoted as AQ) dye were measured as a function of an external ac applied voltage. The self-phased modulation effect was used to measure the nonlinear refractive index of homeotropical-aligned samples. The change of the dyed liquid crystal nonlinearity, which is the direct impact of the applied voltage on the dye molecules orientation, was not observed for the nonlinear response of the pure liquid crystal. Planar (homogeneous) aligned samples were used for birefringence measurements by taking into account the absorption coefficients of the dye. The birefringence decreased to a limiting value in the high voltage region for both pure and dye-doped samples, although in the presence of the absorbing dye the birefringence of the liquid crystal was not approximately changed.The polarized absorption spectra of the dye in nematic mixture were recorded in parallel-aligned liquid crystal cell and its dichroic ratio R and the order parameter S_d were obtained. The electro-optical effect of the guest-host system was also using polarized spectroscopic method.     

Emulsion droplet sizing using low-field NMR with chemical shift resolution and the block gradient pulse method

Pulsed Field Gradient (PFG) measurements are commonly used to determine emulsion droplet size distributions based on restricted self-diffusion within the emulsion droplets. Such measurement capability is readily available on commercial NMR bench-top apparatus. A significant limitation is the requirement to selectively detect signal from the liquid phase within the emulsion droplets; this is currently achieved using either relaxation or self-diffusion contrast. Here we demonstrate the use of a 1.1 T bench-top NMR magnet, which when coupled with an rf micro-coil, is able to provide sufficient chemical shift resolution such that unambiguous signal selection is achieved from the dispersed droplet phase. We also improve the accuracy of the numerical inversion process required to produce the emulsion droplet size distribution, by employing the Block Gradient Pulse (bgp) method, which partially relaxes the assumptions of a Gaussian phase distribution or infinitely short gradient pulse application inherent in current application. The techniques are successfully applied to size 3 different emulsions.     

Rayleigh instability of charged droplets in the presence of counterions

The classical instability of a charged spherical droplet is reconsidered in the presence of counterions. An ensemble of such droplets is studied within a simplified cell model. Screening of the electric field by the counterions is found to increase the equilibrium droplet size. Furthermore, if the ions can enter the droplet, a first-order phase transition occurs upon increasing Bjerrum length, surface tension or droplet density, leading to a phase separation. Simple scaling properties of the free energy give the shape of the phase boundary and show the system to be scale-invariant there. Pearl-necklace structures of hydrophobic polyelectrolytes are discussed as an application. Received 30 August 2001     

Stability of cellulose lyotropic liquid crystal emulsions

We studied a new kind of W/O emulsions based on a lyotropic liquid crystal as the aqueous droplet phase. The cholesteric phase, a solution hydroxypropyl cellulose in water was dispersed in the continuous oil matrix, paraffin oil or heptane. We made a specific choice of surfactant in order to impose director anchoring conditions at the oil-water interface and orient the liquid crystal inside the droplet. The strong anchoring conditions resulted in a topological defect inside the droplets of size above the critical value R^*. The defect elastic energy creates a barrier against droplet coalescence, the effect of topological size selection. We have studied the orientation of the director inside the droplets and their size distribution.     

Fast electro-optical switching and high contrast ratio in epoxy-based polymer dispersed liquid crystals

We report the observation of an electro-optical switching effect from an opaque to a transparent state occurring at a threshold value of the applied field in a polymer dispersed liquid crystal (PDLC). Optical responses of the composite film under the conditions of an externally applied ac electric field (2–5 V_p−p/μ) and a film thickness (50 μm), were determined using an Argon laser (wavelength 514 nm). The experimental results showed promising switching times with a rise time of 190 μs and a decay time of 2 ms and an exceptionally high contrast ratio up to 410. These results demonstrate the validity of employing this new PDLC in electro-optical devices.