Voltammetry and electrochemical impedance spectroscopy of gold electrodes modified with CdTe quantum dots and their conjugates with nickel tetraamino phthalocyanine

This work reports on the synthesis of conjugates of cadmium telluride quantum dots (CdTe-QDs) caped with thioglycolic acid and peripherally substituted nickel tetraamino phthalocyanine (NiTAPc) complex. The conjugates are characterized using cyclic (CV) and differential pulse (DPV) voltammetries, electrochemical impedance spectroscopy, X-ray powder diffraction, infrared spectroscopy, Raman spectroscopy, atomic force microscopy and time correlated single photon counting. CV and DPV show that NiTAPc stabilizes the CdTe QDs against oxidation to metallic products.     

Nickel Tetraaminophthalocyanine Based Films for the Electrocatalytic Activation of Dopamine

A novel electrode material was obtained by two consecutive procedures: (i) the electropolymerization of NiTAPc in DMF via the electro‐oxidative N–N coupling of the amino groups, to achieve a film denoted poly‐NiTAPc, followed by (ii) the electrochemical transformation of the poly‐NiTAPc film in alkaline aqueous solution to form the interconnected O? Ni? O oxo bridges. The obtained film is then denoted poly‐NiTAPc(OH). For the first time the electropolymerized poly‐NiTAPc coating shows a clear electrocatalytic activity towards Dopamine (DA) redox process, either as prepared or upon its electrochemical transformation in alkaline solution. Furthermore it clearly appears that poly‐NiTAPc(OH) film exhibits a much larger electrocatalytic behavior than the as‐prepared poly‐NiTAPc coating. This shows unambiguously the beneficial effect of the changes in the staking structure of the nickel phthalocyanine complexes upon the electrochemical treatment of the film in alkaline solution. It should be emphasized here that the increase in the oxido‐reduction currents related to DA on both films is not to be associated with any changes in the geometrical electrode area. This novel kind of material could present some interesting potentialities for a highly sensitive detection of others neurotransmitters.     

Anodic oxidation of pentachlorophenol at Ti/SnO<Subscript>2</Subscript> electrodes

The electrochemical oxidation of dilute aqueous solutions of pentachlorophenol (PCP) using Ti/SnO₂ as an electrocatalytic material has been investigated. The studies were carried out in a two-compartment electrochemical cell at three different current density values (10, 30 and 50 mA cm^–2) at 25 °C and using 20 mg L^–1 of PCP in 0.1 M NaOH (pH 10) as supporting electrolyte. The PCP concentration and the by-products of the oxidized solution were monitored during the oxidation process using UV and HPLC techniques. For the three current densities investigated it was found that the rate of PCP elimination depends only on the specific electrical charge. Likewise, the oxidation mechanism was proved to occur through the participation of adsorbed hydroxyl radicals (·OH) formed on the SnO₂ surface, whatever the current density used. However, as the applied current density was increased, a current efficiency lower than 2% was obtained, which is due to mass transfer limitations. In addition, it was observed that the PCP was mineralized to CO₂ with conversion percentages as high as 92% and at current density values as low as 10 mA cm^–2. The PCP degradation produces two other by-products of oxidation (<10%), namely carboxylic acids, which are non-toxic compounds. Electronic Publication     

Oxidative decomposition of pentachlorophenol in aqueous solution

OH-radical-induced dechlorination of pentachlorophenol (PCP) has been studies pulse and γ-radiolytically. OH radicals react with PCP by both electron transfer (53%) and addition followed by very rapid HCl-elimination to form phenoxyl radicals. The phenoxyl radicals decay to form products (e.g. chloranil) that unstable in alkaline aqueous solution and release some more Cl⁻, therefore G(Cl⁻) is high. Primary HPLC–MS analysis reveals that some quinones among the final products, whose toxicity remains unclear. Ozone can also oxidize PCP very rapidly, and this oxidation may destroy the benzene ring of PCP.     

Electrochemical Capacitive Behaviour of Multiwalled Carbon Nanotubes Modified with Electropolymeric Films of Nickel Tetraaminophthalocyanine

Electrochemical capacitive behaviour of the electropolymeric nickel tetra‐aminophthalocyanine (poly‐NiTAPc) supported on multiwalled carbon nanotube (MWCNT) platform is described. From the data in 1 M H₂SO₄, the MWCNT‐poly‐NiTAPc exhibited superior capacitance (112 mF cm^?2 or 777 F g^?1). The supercapacitance of the MWCNT‐polyNiTAPc was found to be much better in 1 M H₂SO₄ than in 1 M NaOH medium. Impedance data proved that most of the stored energy of the MWCNT‐poly‐NiTAPc could be accessible at high frequency (1.6 kHz). The electrode is capable of undergoing continuous charge‐discharge process for more than a 1000 cycles without any significant deterioration in the stability.     

氨基酸对CdTe量子点荧光性质的影响

以巯基乙酸为稳定剂, 制备了水溶性碲化镉(CdTe)量子点(QDs), 分别考察了pH值和几种氨基酸对CdTe-QDs紫外吸收和荧光的影响. 结果表明, 在不同pH值下, 丙氨酸、丝氨酸、半胱氨酸对CdTe-QDs的荧光有不同的影响, 丙氨酸、丝氨酸使CdTe-QDs荧光发生猝灭现象, 而半胱氨酸在碱性范围内则使CdTe-QDs的荧光明显增强, 说明氨基酸对量子点存在不同的作用机制.     

Adsorption and electrooxidation of dimethyl ether on platinized platinum electrode in sulfuric acid solution

Adsorption and oxidation of dimethyl ether (DME) on the Pt/Pt electrode from 0.5 M H₂SO₄ is studied by measuring transients of current and potential, charging curves, and curves of electrooxidation in the adsorbed layer and also by cyclic voltammetry and steady-state polarization measurements. The DME adsorption is accompanied by dehydrogenation and destruction of its molecules to form a chemisorbed adsorbate that mainly consists of C1 species (HCO_ads and/or CO_ads) with (under certain conditions) a small amount of species that desorb at cathodic polarization. The adsorption and electrooxidation of DME are inhibited by adsorbed oxygen. The possible schemes of DME oxidation, where the reaction of DME chemisorption products with adsorbed oxygen-containing species is the limiting stage, are discussed.     

Immobilization of sodium ions on the pore surface of a porous coordination polymer

A porous coordination polymer (PCP) with immobilization of sodium cations on the pore surface has been synthesized, by employing a bifunctional carboxylate/sulfonate ligand, and structurally characterized. The porous framework with 1D channels of the dimension of 4.9 x 4.9 A2 shows high thermal stability ( approximately 330 degrees C), affording Type I adsorption isotherms for CO2, acetone, and benzene. The chemical shift of 13C NMR and characteristic adsorption energy (betaE0) of acetone adsorbed in this compound represent the Lewis acidity of this framework.     

Electrochemical Oxidation of Sanguinarine and of Its Oxidation Products at a Glassy Carbon Electrode – Relevance to Intracellular Effects

The electrochemical behavior of sanguinarine, a quaternary benzophenanthridine glycoside alkaloid with antimicrobial, anti‐inflammatory, antioxidant and/or immune‐stimulatory activities, was studied at a glassy carbon electrode using cyclic, differential pulse, and square wave voltammetry. The oxidation of sanguinarine is a quasireversible, diffusion‐controlled process and occurred in a cascade mechanism with the formation of several oxidation products which adsorbed at the electrode surface. The oxidation of sanguinarine is pH dependent and involves the transfer of the same number of electrons and protons. The adsorbed sanguinarine oxidation products are reversibly oxidized at the glassy carbon electrode surface and their oxidation for a wide range of pHs was also studied by differential pulse and square wave voltammetry. A mechanism for the oxidation of sanguinarine at glassy carbon electrode is proposed.     

Electrochemical study on the adsorption of carbon oxides and oxidation of their adsorption products on platinum group metals and alloys

CO(2) reduction and CO adsorption on noble metals (Pt, Rh, Pd) and their alloys (Pt-Rh, Pd-Pt, Pd-Rh, Pd-Pt-Rh) prepared as thin rough deposits have been studied by chronoamperometry (CA), cyclic voltammetry (CV) and the electrochemical quartz crystal microbalance (EQCM). The influence of alloy surface composition on the values of surface coverage, eps (electron per site) and potential of the oxidation of CO(2) reduction and CO adsorption products is shown. The oxidation of the adsorbate on Pt-Rh alloys proceeds more easily (at lower potentials) than on pure metals. On the other hand, in the case of Pd-Pt and Pd-Rh alloys the adsorbate oxidation is more difficult and requires higher potentials than on Pt or Rh. The analysis of the EQCM signal is presented for the case of adsorption and oxidation of carbon oxide adsorption products on the electrodes studied. The comparison of adsorption parameters and the EQCM response obtained for platinum group metals and alloys leads to the conclusion that reduced CO(2) cannot be totally identified with adsorbed CO.     

Desorption of catalytic oxidation products of o-xylene from the surface of carbon catalysts

In a study of the oxidation of o-xylene on carbons (in the range of 523–573°K) under nonstationary conditions, it was found that considerable amounts of the reaction products (phthalic anhydride and CO₂) are adsorbed on the surface of the catalysts (phthalic anhydride more strongly than CO₂). The adsorption of the products is chemical in nature, like the adsorption of initial o-xylene. The bond between the adsorbates and the surface weakens with increase in the number of acidic groups on the surface. Since the active carbons are characterized by a higher basicity than the oxidized ones, in the first case the oxidation products of o-xylene are adsorbed more strongly and desorbed more slowly.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 22, No. 4, pp. 499–503, July–August, 1986.     

FTIR study of the ethanol electrooxidation on Pt(100) modified by osmium nanodeposits

In the present work, ethanol electrooxidation on a Pt(100) electrode modified by different coverage degrees of osmium nanoislands obtained by spontaneous depositions, was extensively studied employing in situ FTIR spectroscopy. A collection of spectra of the ethanol adsorption and oxidation processes was acquired during the first series of a positive potential step, to determine the intermediate species, as well as the main products formed. The spectroscopic results obtained were correlated with conventional electrochemical results obtained by cyclic voltammetry. It was shown that the catalytic activity of Pt(100) for ethanol oxidation increases significantly after osmium deposition and that the mechanistic pathway for this reaction depends directly on the osmium coverage degree. Thus, for low osmium coverage (theta;( Os) up to 0.15) the formation of CO as an intermediate was favored and hence the full oxidation of adsorbed ethanol to CO(2) was increased. For higher osmium coverages (theta;(Os) up to 0.33), the higher the coverage is, the more the direct ethanol oxidation to acetaldehyde and acetic acid is favored. For osmium coverage degree of 0.40, the catalytic activity of the electrode for ethanol oxidation decreased. On an almost complete osmium layer (theta;(Os) = 0.92) obtained by electrodeposition at 50 mV vs reversible hydrogen electrode, the catalytic activity for ethanol oxidation shows a much lower value.     

Voltammetric evaluation of the electrode material on the oxidation of cyanide catalyzed by copper ions

The cyanide oxidation on vitreous carbon (VC), stainless steel 304 (SS 304) and titanium (Ti) was investigated through a voltammetric study of cyanide solutions also containing copper ions. Results showed that cyanide oxidation occurs by means of a catalytic mechanism involving adsorbed species as CN^–, Cu(CN)₄^3– or Cu(CN)₄^2– depending on the electrode material. It was observed that on VC, the adsorption of Cu(CN)₄^3– controlled the oxidation rate. Instead, for SS 304 and Ti, the adsorption of CN^– controlled the global process. However, in all cases, the adsorption of Cu(CN)₄^3– on the electrode surface was required for the catalytic oxidation of CN^–. Voltammetric experiments for solutions containing cyanide oxidation products, such as cyanogen (CN)₂ and cyanate (CNO^–), confirmed that the adsorbed species mentioned above controlled the catalytic oxidation of CN^– depending on the electrode material. A voltammetric identification of the oxidation products showed that cyanogen, (CN)₂ tended to adosorb on VC, while the formation of cyanate, CNO^– predominated on SS 304.     

Irreversible electrostatic deposition of CdTe quantum dots on glassy carbon electrodes from colloidal solutions

Journal of Solid State Electrochemistry - Cadmium telluride quantum dots (CdTe-QDs) can be deposited from colloidal solutions on glassy carbon (GC) electrodes potentiostatically. The immobilization...     

Identification of ozone-oxidation products of oxycodone by electrospray ion trap mass spectrometry

The products of oxycodone oxidized by ozone were characterized by electrospray ionization-tandem mass spectrometry (ESI--MS/MS). Liquid Chromatography(LC)--MS analyses revealed that the main constituents in the oxidation reaction mixture included the protonated molecules m/z 316, corresponding to oxycodone, and m/z 332, m/z 348, m/z 366, corresponding to the oxidation products. ESI--MS/MS and MS(n) spectra were used to study oxycodone fragmentation in detail and to characterize the structures of oxidation products. The results show that the oxidation products were formed by addition of one or two oxygen atoms or by addition of three oxygen and two hydrogen atoms to oxycodone. The fragmentation of the oxidation products also shows that the aromatic ring oxidizes due to rupture of the C-3--C-4 bond during product formation.     

The Use of Thin‐Layer Electroanalysis in the Study of the Chemisorption and Anodic Oxidation of Aromatic Molecules at Smooth Polycrystalline Palladium

Thin‐layer electroanalytical chemistry has been used in the study of the chemisorption and anodic oxidation of hydroquinone and benzoquinone at smooth polycrystalline palladium electrode surfaces in aqueous sulfuric acid solutions. The results were reminiscent of those obtained previously on smooth polycrystalline platinum: i) At low aqueous‐solution concentrations, the diphenol is oxidatively chemisorbed to form surface‐coordinated benzoquinone oriented parallel to the surface. ii) At higher concentrations, the oxidative chemisorption occurs via C? H activation to yield an edge‐oriented diphenolic species. iii) Chemisorption from benzoquinone solutions leads to species identical to those from hydroquinone solutions. iv) The extent of anodic oxidation of the chemisorbed organic depends upon the initial adsorbed‐molecule orientation: the flat‐adsorbed species are oxidized completely to carbon dioxide, whereas oxidation of the edge‐chemisorbed species yields other (unidentified) products that are chemisorbed upon regeneration of the oxide‐free surface.     

CrO3.CH3NH2.HCl／Al2O3的制备及其对苯偶姻体系的氧化反应

ＣｒＯ３·ＣＨ３ＮＨ２·ＨＣｌ／Ａｌ２Ｏ３的制备及其对苯偶姻体系的氧化反应张贵生＊石启增陈密峰蔡昆（河南师范大学化学系新乡４５３００２）关键词ＣｒＯ３·ＣＨ３ＮＨ２·ＨＣｌ／Ａｌ２Ｏ３，苯偶姻，苯偶酰，氧化１９９６－０８－１８收稿，１９９６－１１－０...     

Mechanistic study of electrocatalytic oxidation of formic acid at platinum in acidic solution by time-resolved surface-enhanced infrared absorption spectroscopy

Surface-enhanced infrared absorption spectroscopy (SEIRAS) combined with cyclic voltammetry or chronoamperometry has been utilized to examine kinetic and mechanistic aspects of the electrocatalytic oxidation of formic acid on a polycrystalline Pt surface at the molecular scale. Formate is adsorbed on the electrode in a bridge configuration in parallel to the adsorption of linear and bridge CO produced by dehydration of formic acid. A solution-exchange experiment using isotope-labeled formic acids (H(12)COOH and H(13)COOH) reveals that formic acid is oxidized to CO(2) via adsorbed formate and the decomposition (oxidation) of formate to CO(2) is the rate-determining step of the reaction. The adsorption/oxidation of CO and the oxidation/reduction of the electrode surface strongly affect the formic acid oxidation by blocking active sites for formate adsorption and also by retarding the decomposition of adsorbed formate. The interplay of the involved processes also affects the kinetics and complicates the cyclic voltammograms of formic acid oxidation. The complex voltammetric behavior is comprehensively explained at the molecular scale by taking all these effects into account.     

盐酸三甲胺三氧化铬／硅胶载体试剂的制备及其对苯偶姻体系的氧化

报道了盐酸三甲胺三氧化锆／硅胶载体试剂的制备方法及其对苯偶姻的氧化反应。该试剂制备简单，用于地苯偶姻的氧化，高收率地得到相应的苯偶酰在化合物，并且反应条件温和，产物易分离。     

Photooxidation of a mustard gas simulant over TiO2-SiO2 mixed-oxide photocatalyst: site poisoning by oxidation products and reactivation

The photooxidation of 2-chloroethyl ethyl sulfide (2-CEES), a simulant for mustard gas, was studied using transmission IR spectroscopy on a mixed-oxide TiO2-SiO2 photocatalyst. Ultraviolet irradiation in the photon energy range from 2.1 to 5 eV was employed at a catalyst temperature of 200 K. Rapid photooxidation was observed by the loss of infrared intensity in the v(CHx) stretching region, and concomitant infrared features of adsorbed oxidation products were observed to develop. The oxidation products, captured on the photocatalyst at 200 K, were found to block 2-CEES readsorption. Upon heating the poisoned photocatalyst to about 300 K, infrared measurements indicate that the adsorbed CO2 oxidation product was desorbed. The capability for full readsorption of 2-CEES was achieved upon heating the poisoned photocatalyst to 397 K, and continued rapid photooxidation of the 2-CEES was then possible at about 1/3 the rate found for the fresh catalyst. Thus thermal treatment at 397 K of oxidation-product-poisoned TiO2-SiO2 material is able to partially restore the TiO2-SiO2 photooxidation activity.