Real Time Electrochemical Monitoring of DNA/PNA Dissociation by Melting Curve Analysis

An immobilization‐free electrochemical method is reported for real‐time monitoring of the DNA hybrid dissociation between a ferrocene labeled peptide nucleic acid (PNA) and a fully‐complementary or single‐base‐mismatched DNA. This method takes advantages of electrostatic charge characteristics and interactions among the neutrally charged PNA, the negatively charged DNA and the negatively charged electrode surface made of indium tin oxide (ITO). When a ferrocene labeled PNA (Fc‐PNA) sequence is hybridized to a complementary DNA strand, electrostatic repulsion between the negatively charged PNA/DNA hybrid and the negative ITO surface retards the diffusion of the electroactive Fc to the electrode, resulting in a much reduced electrochemical signal. On the other hand, when the Fc‐PNA is dissociated from the hybrid at elevated temperatures, the neutrally charged Fc‐PNA easily diffuses to the electrode with an enhanced electrochemical signal. Therefore, an electrochemical melting curve of the Fc‐PNA/DNA hybrid can be obtained by measuring the Fc signal with the increasing temperature. This strategy allows monitoring of the dissociation of the DNA hybrid in real time, which might lead to a simple detection method for single nucleotide polymorphism (SNP) analysis.     

A new peptide nucleotide acid biosensor for electrochemical detection of single nucleotide polymorphism in duplex DNA via triplex structure formation

In this paper, we report a new PNA biosensor for electrochemical detection of point mutation or single nucleotide polymorphism (SNP) in p53 gene corresponding oligonucleotide based on PNA/ds-DNA triplex formation following hybridization of PNA probe with double-stranded DNA (ds-DNA) sample without denaturing the ds-DNA into single-stranded DNA (ss-DNA). As p53 gene is mutated in many human tumors, this research is useful for cancer therapy and genomic study. In this approach, methylene blue (MB) is used for electrochemical signal generation and the interaction between MB and oligonucleotides is studied by differential pulse voltammety (DPV). Probe-modified electrode is prepared by self-assembled monolayer (SAM) formation of thiolated PNA molecules on the surface of Au electrode. A significant increase in the reduction signal of MB following hybridization of the probe with the complementary double-stranded oligonucleotide (ds-oligonucleotide) confirms the function of the biosensor. The selectivity of the PNA sensor is investigated by non-complementary ds-oligonucleotides and the results support the ability of the sensor to detect single-base mismatch directly on ds-oligonucleotide. The influence of probe and ds-DNA concentrations on the effective discrimination against complementary sequence and point mutation is studied and the concentration of 10^?6 M is selected as appropriate concentration. Diagnostic performance of the biosensor is described and the detection limit is found to be 4.15 × 10^?12 M.     

Nucleic acid sensor for M. tuberculosis detection based on surface plasmon resonance

Cysteine modified NH(2)-end peptide nucleic acid (PNA) (24-mer) probe and 5'-thiol end labeled deoxyribonucleic acid (DNA) probes specific to Mycobacterium tuberculosis have been immobilized onto BK-7 gold coated glass plates for the detection of complementary, one-base mismatch, non-complementary targets and complementary target sequence in genomic DNA of Mycobacterium tuberculosis using a surface plasmon resonance (SPR) technique. The DNA/Au and PNA/Au bio-electrodes have been characterized using contact angle, atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetric (CV) techniques, respectively. It is revealed that there is a 252 millidegrees SPR angle change in the case of PNA immobilization and 205 millidegrees for DNA immobilization, indicating increased amount of immobilized PNA molecules. Hybridization studies reveal that there is no binding of the non-complementary target to DNA/Au and PNA/Au electrode. Compared to the DNA/Au bioelectrode, PNA/Au electrode has been found to be more efficient for detection of one-base mismatch sequence. The PNA/Au bioelectrode shows better detection limit (1.0 ng ml(-1)) over the DNA-Au bioelectrode (3.0 ng ml(-1)). The values of the association (k(a)) and dissociation rate constant (k(d)) for the complementary sequence in case of the PNA/Au bioelectrode have been estimated as 8.5 x 10(4) m(-1) s(-1) and 3.6 x 10(-3) s(-1), respectively.     

Voltammetric detection of uridin diphosphate glucuronosyl transferase 1A9 (UGT1A9) gene corresponding oligonucleotide covering promoter region from −268 to −280 including (A/T) polymorphism at position −275 and optimization of the detection factors

In this study, we developed a new peptide nucleic acid (PNA) biosensor for detection of a single nucleotide polymorphism (SNP) in the UGT1A9 gene promoter region via electrochemical assay. The sensor relies on the immobilization of a 13-mer single stranded PNA probe related to the UGT1A9 gene on the Au electrode (AuE). The hybridization between the probe and its complementary sequence (DcUG275) as the target was studied by differential pulse voltammetry (DPV) of methylene blue (MB) signal. In this approach the extent of hybridization is evaluated on the basis of the difference between DPV signals of MB accumulated on the probe-AuE and MB accumulated on the probe-target-AuE. Some experimental variables affecting the performance of the biosensor including oxygen interference during the assay, probe immobilization time, probe concentration and MB accumulation time were investigated. The PNA probe modified AuE in its optimum condition was shown to be an effective sensor for the detection of hybridization and point mutations. The obtained detection limit of the utilized biosensor has been calculated as 22 nm.     

Preliminary evaluation of electrochemical PNA array for detection of single base mismatch mutations

We report here a preliminary evaluation of a microfabricated disposable-type peptide nucleic acid (PNA) array, with a 20-channel electrode, for the detection of cancer gene c-Ki-ras. Synthetic 15-mer PNA probes complimentary to ras sequence modified with cysteine were immobilized on the gold electrodes on the array. The electrochemical PNA array was reacted with 20-mer oligonucleotide target or 128 bp PCR product for 1 h. The anodic current derived from an electrochemically active DNA binder Hoechst 33258 was measured using the PNA array in the 50 microL of reaction chamber. The anodic current from Hoechst 33258 increased with increasing the concentration of PCR product of ras gene in the range from 10(11) to 10(15) copy mL(-1). The single base mismatch mutations of c-Ki-ras/61 were also detected using the electrochemical PNA array.     

Nano‐Gold Modified Genosensor for Direct Detection of DNA Hybridization

In this paper, nano‐gold modified carbon paste electrode (NGMCPE) was employed to develop an electrochemical DNA hybridization biosensor. The proposed sensor was made up by immobilization of 15‐mer single stranded oligonucleotide probe for detection of target DNA. Hybridization detection relies on the alternation in guanine oxidation signal following hybridization of the probe with complementary genomic DNA. The guanine oxidation was monitored using differential pulse voltammetry (DPV). Different factors such as activation potential, activation time and probe immobilization conditions were optimized. The selectivity of the sensor was investigated by non‐complementary oligonucleotides. Diagnostic performance of the biosensor was described and the detection limit was found 1.9 × 10^?13 M at the NGMCPE surface. All of the investigations were performed in both CPE and NGMCPE and finally their results were compared.     

Enzyme-catalyzed signal amplification for electrochemical DNA detection with a PNA-modified electrode

The signal amplification technique of peptide nucleic acid (PNA)-based electrochemical DNA sensor was developed in a label-free and one-step method utilizing enzymatic catalysis. Electrochemical detection of DNA hybridization on a PNA-modified electrode is based on the change of surface charge caused by the hybridization of negatively charged DNA molecules. The negatively charged mediator, ferrocenedicarboxylic acid, cannot diffuse to the DNA hybridized electrode surface due to the charge repulsion with the hybridized DNA molecule while it can easily approach the neutral PNA-modified electrode surface without the hybridization. By employing glucose oxidase catalysis on this PNA-based electrochemical system, the oxidized mediator could be immediately reduced leading to greatly increased electrochemical signals. Using the enzymatic strategy, we successfully demonstrated its clinical utility by detecting one of the mutation sequences of the breast cancer susceptibility gene BRCA1 at a sample concentration lower than 10(-9) M. Furthermore, a single base-mismatched sample could be also discriminated from a perfectly matched sample.     

Indigo Carmine as New Label in PNA Biosensor for Detection of Short Sequence of p53 Tumor Suppressor Gene

A new electrochemical PNA hybridization biosensor for detection of a 15‐mer sequence unique to p53 using indigo carmine (IC) as an electrochemical detector is described in this work. This genosensor is based on the hybridization of target oligonucleotide with its complementary probe immobilized on the gold electrode by self‐assembled monolayer formation. Because this label is electroactive in acidic medium, the interaction between IC and short sequence of p53 is studied by differential pulse voltammety (DPV) in 0.1 M H₂SO₄. The results of electrochemical impedance spectroscopy and cyclic voltammetry in the solution of [Fe(CN)₆]^3?/4? shows no breakage in PNA‐DNA duplex. A decrease in the voltammetric peak currents of IC is observed upon hybridization of the probe with the target DNA. The influence of probe concentration on effective discrimination against non‐complementary oligonucleotides is investigated and a concentration of 10^?7 M is selected. The diagnostic performance of the PNA sensor is described and the detection limit is found to be 4.31×10^?12 M.     

Label- and marker-free gene detection based on hybridization-induced conformational flexibility changes in a ferrocene-PNA conjugate probe

We report a strategy for label-free and marker-free gene detection transducing the hybridization event to an electrochemical signal based on the hybridization-induced conformational flexibility change in probe structure. The probe structure was designed to possess a ferrocene moiety as a reporter part and a cysteine moiety as an anchor part at each end of a peptide nucleic acid (PNA) as a recognition part. Electrochemical examination of probe-modified gold electrodes revealed that the ferrocene moiety was placed at the flexible end of the linear probe chain. Upon hybridization with a complementary target DNA, the resultant rigid duplex restricted the ferrocene motion to the electrode surface, causing a decrease in the observed current. The target DNA was detected with the detection limit of 1.44 x 10(-11) M. Thus the probe functioned as a 'self-reporting probe' and detection of the target DNA was demonstrated without the need for external indicators. Moreover, the sensor electrode was able repeatedly to detect the target DNA by the process of regeneration and could discriminate a mismatched DNA.     

Sequence Specific Electrochemical DNA Detection Based on Solution‐Phase Competitive Hybridization

We report a novel electrochemical method for detecting sequence‐specific DNA based on competitive hybridization that occurs in a homogeneous solution phase instead of on a solution‐electrode interface as in previously reported competition‐based electrochemical DNA detection schemes. The method utilizes the competition between the target DNA (t‐DNA) and a ferrocene‐labeled peptide nucleic acid probe (Fc‐PNA) to hybridize with a probe DNA (p‐DNA) in solution. The neutral PNA backbone and the electrostatic repulsion between the negatively‐charged DNA backbone and the negatively‐charged electrode surface are then exploited to determine the result of the competition through measurement of the electrochemical signal of Fc. Upon the introduction of the t‐DNA, the stronger hybridization affinity between the t‐DNA and p‐DNA releases the Fc‐PNA from the Fc‐PNA/p‐DNA hybrid, allowing it to freely diffuse to the negatively charged electrode to produce a significantly enhanced electrochemical signal of Fc. Therefore, the presence of the t‐DNA is indicated by the appearance or enhancement of the electrochemical signal, rendering a signal‐on DNA detection, which is less susceptible to false positive and can produce more reliable results than signal‐off detection methods. All the competitive hybridizations occur in a homogeneous solution phase, resulting in very high hybridization efficiency and therefore extremely short assay time. This simple and fast signal‐on solution‐competition‐based electrochemical DNA detection strategy has promising potential to find application in fields such as nucleic acid‐based point‐of‐care testing.     

Detection of bar gene encoding phosphinothricin herbicide resistance in plants by electrochemical biosensor

An electrochemical biosensor for the detection of bar gene coding phosphinothricin herbicide resistance is presented. The detection was based on hybridization reaction between the specific to bar gene 19-mer probe immobilized on the electrode surface and complementary DNA in a sample. Single-stranded DNA probe specific to bar gene was covalently attached by 5'-phosphate end to the surface of carbon paste electrode. Outer layer of a conventional CPE was provided with carboxyl groups of stearic acid. ssDNA was coupled to the electrode through ethylenediamine with the use of water-soluble 1-ethyl-3(3'-dimethylaminopropyl)-carbodiimide and N-hydroxy-sulfosuccinimide as activating reagents. Hybridization reaction at the electrode surface was detected via Co(bpy)(3)(3+), which possess a much higher affinity to the resulting DNA duplex compared to ssDNA probe. Detection limit of the sensor was 0.1 microM of target DNA fragments and its response was linear from 5 to 20 microM. Hybridization event was also detected by measuring guanine peak but this approach presented distinctly higher detection limit (1 muM) and lower reproducibility. Complete time of one measurement with the use of the biosensor including covalent attachment of ethylenediamine (linker) and ssDNA probe to the electrode, hybridization with target and interaction with electroactive indicator was about 70 min.     

Signal enhancement for gene detection based on a redox reaction of [Fe(CN)(6)](4-) mediated by ferrocene at the terminal of a peptide nucleic acid as a probe with hybridization-amenable conformational flexibility

Electrochemically enhanced DNA detection was demonstrated by utilizing the couple of a synthesized ferrocene-terminated peptide nucleic acid (PNA) with a cysteine anchor and a sacrificial electron donor [Fe(CN)(6)](4-). DNA detection sensors were prepared by modifying a gold electrode surface with a mixed monolayer of the probe PNA and 11-hydroxy-1-undecanethiol (11-HUT), protecting [Fe(CN)(6)](4-) from any unexpected redox reaction. Before hybridization, the terminal ferrocene moiety of the probe was subject to a redox reaction due to the flexible probe structure and, in the presence of [Fe(CN)(6)](4-), the observed current was amplified based on regeneration of the ferrocene moiety. Hybridization decreased the redox current of the ferrocene. This occurred because hybridization rigidified the probe structure: the ferrocene moiety was then removed from the electrode surface, and the redox reaction of [Fe(CN)(6)](4-) was again prevented. The change in the anodic current before and after hybridization was enhanced 1.75-fold by using the electron donor [Fe(CN)(6)](4-). Sequence-specific detection of the complementary target DNA was also demonstrated.     

Electrochemical detection of DNA hybridization by using a zirconia modified renewable carbon paste electrode

A simple, polishable and renewable DNA biosensor was fabricated based on a zirconia modified carbon paste electrode. Zirconia was mixed with graphite powder and paraffin wax to produce the paste for the electrode, and response-optimized at 56% graphite powder, 19% ZrO(2) and 25% paraffin wax. An oligonucleotide probe with a terminal 5'-phosphate group was attached to the surface of the electrode via the strong affinity of zirconia for phosphate groups. DNA immobilization and hybridization were characterized by cyclic voltammetry and differential pulse voltammetry, using methylene blue as indicator. Examination of changes in response with complementary or non-complementary DNA sequences showed that the developed biosensor had a high selectivity and sensitivity towards hybridization detection (< or =2x10(-10) M complementary DNA detectable). The surface of the biosensor can be renewed quickly and reproducibly (signal RSD+/-4.6% for five successive renewals) by a simple polishing step.     

Alteration of the selectivity of hybridization of immobilized oligonucleotide probes by co-immobilization with charged oligomers of ethylene glycol

A significant challenge exists in the creation of an environment for immobilized probe oligonucleotides that offer good structural regularity and reproducibility, where nearest neighbour interactions provide for control of selectivity, yet where the degree of hybridization does not alter nearest neighbour interactions. This new work explores whether a “matrix isolation” method will produce the desired environment for the probe molecules. The DNA oligonucleotide probes are polyelectrolytes with charged backbones and significant flexibility. It is possible to isolate the probe molecules by surrounding each, on average, with a sheath of immobilized oligomer that is not based on complementary nucleic acid, yet that is a polyelectrolyte in order to control the surface density and charge within the mixed film. Preliminary work investigates a mixture of dT₂₀ as the probe oligonucleotide, and a 20-mer oligomer primarily containing ethylene glycol phosphate, as a matrix isolation material in a 1:20 mole ratio, respectively. Melt temperature (T_m) measurements indicate that the thermodynamic stability of the probe molecules can be adjusted using the oligomer matrix to achieve lower T_m values by up to 5 °C, with full retention of selectivity for discrimination of single base pair mismatches even under conditions where the probes at a surface are saturated with complementary target.     

Electroactive chitosan nanoparticles for the detection of single-nucleotide polymorphisms using peptide nucleic acids

Here we report an electrochemical biosensor that would allow for simple and rapid analysis of nucleic acids in combination with nuclease activity on nucleic acids and electroactive bionanoparticles. The detection of single-nucleotide polymorphisms (SNPs) using PNA probes takes advantage of the significant structural and physicochemical differences between the full hybrids and SNPs in PNA/DNA and DNA/DNA duplexes. Ferrocene-conjugated chitosan nanoparticles (Chi-Fc) were used as the electroactive indicator of hybridization. Chi-Fc had no affinity towards the neutral PNA probe immobilized on a gold electrode (AuE) surface. When the PNA probe on the electrode surface hybridized with a full-complementary target DNA, Chi-Fc electrostatically attached to the negatively-charged phosphate backbone of DNA on the surface and gave rise to a high electrochemical oxidation signal from ferrocene at ∼0.30 V. Exposing the surface to a single-stranded DNA specific nuclease, Nuclease S1, was found to be very effective for removing the nonspecifically adsorbed SNP DNA. An SNP in the target DNA to PNA made it susceptible to the enzymatic digestion. After the enzymatic digestion and subsequent exposure to Chi-Fc, the presence of SNPs was determined by monitoring the changes in the electrical current response of Chi-Fc. The method provided a detection limit of 1 fM (S/N = 3) for the target DNA oligonucleotide. Additionally, asymmetric PCR was employed to detect the presence of genetically modified organism (GMO) in standard Roundup Ready soybean samples. PNA-mediated PCR amplification of real DNA samples was performed to detect SNPs related to alcolohol dehydrogenase (ALDH). Chitosan nanoparticles are promising biometarials for various analytical and pharmaceutical applications. Figure The electrochemical method for SNP detection using PNA probes and chitosan nanoparticles takes advantage of the significant structural and physicochemical differences between PNA/DNA and DNA/DNA duplexes. Single-stranded DNA specific enzymes selectively choose these SNP sites and hydrolyze the DNA molecules on gold electrode (AuE) surface. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Sequence-specific binding of DNA to liposomes containing di-alkyl peptide nucleic acid (PNA) amphiphiles

We present a method to covalently attach peptide nucleic acid (PNA) to liposomes by conjugation of PNA peptide to charged amino acids and synthetic di-alkyl lipids ("PNA amphiphile," PNAA) followed by co-extrusion with disteroylphosphatidylcholine (DSPC) and cholesterol. Attachment of four Glu residues and two ethylene oxide spacers to the PNAA was required to confer proper hydration for extrusion and presentation for DNA hybridization. The extent of DNA oligomer binding to 10-mer PNAA liposomes was assessed using capillary zone electrophoresis. Nearly all PNAs on the liposome surface are complexed with a stoichiometric amount of complementary DNA 10-mers after 3-h incubation in pH 8.0 Tris buffer. No binding to PNAA liposomes was observed using DNA 10-mers with a single mismatch. Longer DNA showed a greatly attenuated binding efficiency, likely because of electrostatic repulsion between the PNAA liposome double layer and the DNA backbone. Langmuir isotherms of PNAA:DSPC:chol monolayers indicate miscibility of these components at the compositions used for liposome preparation. PNAA liposomes preserve the high sequence-selectivity of PNAs and emerge as a useful sequence tag for highly sensitive bioanalytical devices.     

Label-free electrochemical detection of DNA hybridization on gold electrode

A label-free electrochemical detection protocol for DNA hybridization is reported for the first time by using a gold electrode (AuE). The oxidation signal of guanine was monitored at +0.73 V by using square wave voltammetry (SWV) on self-assembled l-cysteine monolayer (SAM) modified AuE. The electrochemical determination of hybridization between an inosine substituted capture probe and native target DNA was also accomplished. 6-mer adenine probe was covalently attached to SAM via its amino link at 5^′ end. Then, 6-mer thymine-tag of the capture probe was hybridized with the adenine probe, thus left the rest of the oligonucleotide available for hybridization with the target. The dependence of the guanine signal upon the concentration of the target was observed. Probe modified AuE was also challenged with non-complementary and mismatch containing oligonucletides. Label-free detection of hybridization on AuE is greatly advantageous over the existing carbon and mercury electrode materials, because of its potential applicability to microfabrication techniques. Performance characteristics of the genosensor are described, along with future prospects.     

Electrochemical detection of human papilloma virus (HPV) target DNA using MB on pencil graphite electrode

The present paper describes the use of methylene blue (MB) as an electroactive label on a pencil graphite (lead) electrode (PGE) to provide a well-defined recognition interface for the detection of HPV target DNA. In order to construct the sensor, a 20-mer single strand oligonucleotide probe related to human papilloma virus (HPV) major capsid protein L1 gene was immobilized on the PGE electrode. Hybridization event between the probe and its complementary sequence was studied by measurement of MB signal accumulated on the PGE using square wave voltammetry (SWV) method. Some hybridization experiments with noncomplementary oligonucleotides were carried out to examine the selectively of the sensor to the target DNA from other DNAs related to Hepatitis C virus (HCV), fungi, and bacterial genes. Moreover, some factors affecting the function of sensor including electrode activation and probe immobilization condition were also investigated. The data showed that the constructed electrode detects the target DNA with detection limit of 1.2 ng μl^?1 and discriminates it from various DNAs originated from a wide variety of organisms.     

Detection of DNA and Protein Molecules Using an FET‐Type Biosensor with Gold as a Gate Metal

In this study, a field effect transistor (FET)‐type biosensor based on 0.5 μm standard complementary metal oxide semiconductor (CMOS) technology is proposed and its feasibility for detecting deoxyribonucleic acid (DNA) and protein molecules is investigated. Au, which has a chemical affinity with thiol by forming a self‐assembled monolayer (SAM), was used as the gate metal in order to immobilize DNA and protein molecules. A Pt pseudo‐reference electrode was employed for the detection of biomolecules. The sensor was fabricated as a p‐channel (P)MOSFET‐type because PMOSFET with positive surface potential is useful for detecting negatively charged biomolecules from the view point of its high sensitivity and fast response time. DNA and protein molecules were detected by measuring the variation of the drain current due to the variation of biomolecular charge and capacitance. DNA and protein molecules used in the experiment were 15mer–oligonucleotide probe and streptavidin‐biotin protein complexes, respectively. DNA was detected by both in situ and ex situ measurements. Additionally, to verify the interactions among SAM, streptavidin, and biotin, surface plasmon resonance (SPR) measurement was performed.     

Detection of Aeromonas hydrophila DNA oligonucleotide sequence using a biosensor design based on Ceria nanoparticles decorated reduced graphene oxide and Fast Fourier transform square wave voltammetry

A new strategy was introduced for ssDNA immobilization on a modified glassy carbon electrode. The electrode surface was modified using polyaniline and chemically reduced graphene oxide decorated cerium oxide nanoparticles (CeO₂NPs-RGO). A single-stranded DNA (ssDNA) probe was immobilized on the modified electrode surface. Fast Fourier transform square wave voltammetry (FFT-SWV) was applied as detection technique and [Ru(bpy)₃]^2+/3+ redox signal was used as electrochemical marker. The hybridization of ssDNA with its complementary target caused a dramatic decrease in [Ru(bpy)₃]^2+/3+ FFT-SW signal. The proposed electrochemical biosensor was able to detect Aeromonas hydrophila DNA oligonucleotide sequence encoding aerolysin protein. Under optimal conditions, the biosensor showed excellent selectivity toward complementary sequence in comparison with noncomplementary and two-base mismatch sequences. The dynamic linear range of this electrochemical DNA biosensor for detecting 20-mer oligonucleotide sequence of A. hydrophila was from 1 × 10⁻¹⁵ to 1 × 10⁻⁸ mol L⁻¹. The proposed biosensor was successfully applied for the detection of DNA extracted from A. hydrophila in fish pond water up to 0.01 μg mL⁻¹ with RSD of 5%. Besides, molecular docking was applied to consider the [Ru(bpy)₃]^2+/3+ interaction with ssDNA before and after hybridization.