温度及pH敏感聚(丙烯酸)/聚(N-异丙基丙烯酰胺)互穿聚合物网络水凝胶的合成及性能研究

合成聚（丙烯酸）／聚（Ｎ 异丙基丙烯酰胺）互穿聚合物网络（ＰＡＡｃ／ＰＮＩＰＡＩＰＮ）水凝胶，具有温度及ｐＨ双重敏感特性．这种水凝胶在弱碱性条件下的溶胀率远大于酸性条件下的溶胀率．在酸性条件下，随着温度上升，凝胶的溶胀率也随之逐渐上升；而在弱碱性条件下，温度低于聚（Ｎ 异丙基丙烯酰胺）（ＰＮＩＰＡ）的较低临界溶解温度（ＬＣＳＴ）时，溶胀率也随着温度的上升而上升，当温度达到ＬＣＳＴ时，凝胶的溶胀率突然急剧下降，并随着温度的逐渐上升而下降．     

温度及pH敏感性N-乙烯基吡咯烷酮与丙烯酸β-羟基丙酯共聚物/聚(丙烯酸)互穿网络水凝胶的合成及其性能研究

由N 乙烯基吡咯烷酮与丙烯酸 β 羟基丙酯共聚物 /聚 (丙烯酸 )所得的互穿网络水凝胶P(NVP co β HPA) /PAA具有温度及pH双重敏感特性 .在酸性条件下 ,由于P(NVP)与PAA间络合作用 ,随温度升高迅速退胀 ;在碱性条件下 ,凝胶的溶胀率远大于酸性条件下的溶胀率 ,且随温度的升高而逐渐增大     

Dual crosslinked pH‐ and temperature‐sensitive hydrogel beads for intestine‐targeted controlled release

Novel drug‐loaded hydrogel beads for intestine‐targeted controlled release were developed by using pH‐ and temperature‐sensitive carboxymethyl chitosan‐graft‐poly(N,N‐diethylacrylamide) (CMCTS‐g‐PDEA) hydrogel as carriers and vitamin B₂ (VB₂) as a model drug. The hydrogel beads were prepared based on Ca²⁺ ionic crosslinking in acidic solution and formed dual crosslinked network structure. The structure of hydrogel and morphology of drug‐loaded beads were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The study about swelling characteristics of hydrogel beads indicated that the beads had obvious pH‐ and temperature‐sensitivity. In vitro release studies of drug‐loaded beads were carried out in pH 1.2 HCl buffer solution and pH 7.4 phosphate buffer solution at 37°C, respectively. The results indicated that the dual crosslinked method could effectively control the drug release rate under gastrointestinal tract (GIT) conditions, which was superior to traditional single crosslinked beads. In addition, the effects of grafting percentage, pH value, and temperature on the release behavior of the VB₂ were investigated. The drug release mechanism of CMCTS‐g‐PDEA drug‐loaded beads was analyzed by Peppa's potential equation. According to this study, the dual crosslinked hydrogel beads based on CMCTS‐g‐PDEA could serve as suitable candidate for drug site‐specific carrier in intestine. Copyright © 2009 John Wiley & Sons, Ltd.     

Fabrication and characterization of microstructured and pH sensitive interpenetrating networks hydrogel films and application in drug delivery field

Novel microstructured and pH sensitive poly(acryliac acid-co-2-hydroxyethyl methacrylate)/poly(vinyl alcohol) (P(AA-co-HEMA)/PVA) interpenetrating network (IPN) hydrogel films were prepared by radical precipitation copolymerization and sequential IPN technology. The first P(AA-co-HEMA) network was synthesized in the present of PVA aqueous solution by radical initiating, then followed by condensation reaction (Glutaraldehyde as crosslinking agent) within the resultant latex, it formed multiple IPN microstructured hydrogel film. The film samples were characterized by IR, SEM and DSC. Swelling and deswelling behaviors and mechanical property showed the novel multiple IPN nanostuctured film had rapid response and good mechanical property. The IPN films were studied as controlled drug delivery material in different pH buffer solution using cationic compound, crystal violet as a model drug. The drug release followed different release mechanism at pH 4.0 and pH 7.4, respectively.     

A pH‐sensitive water‐soluble N‐carboxyethyl chitosan/poly(hydroxyethyl methacrylate) hydrogel as a potential drug sustained release matrix prepared by photopolymerization technique

Biocompatible pH‐sensitive semi‐interpenetration polymeric network hydrogels (semi‐IPN) based on water‐soluble N‐carboxyethyl chitosan (CECS) and 2‐hydroxyethyl methacrylate (HEMA) were synthesized by the photopolymerization technique. pH‐sensitivity, cytotoxicity, morphology, mechanical property, and water state of hydrogel were investigated by a swelling test, methylthiazolydiphenyl‐tetrazolium bromide (MTT) assay, scanning electron microscopy (SEM), universal testing machine, and differential scanning calorimetry (DSC), respectively. The drug release studies were carried out using 5‐Flurouracil as the model drug. The results indicated that the hydrogels were sensitive to pH of the medium and its wet state had good mechanical properties. The results of cytotoxicity and prolonged drug release characteristics revealed the suitability of the hydrogels as drug delivery matrices. The release kinetics was evaluated by fitting the experimental data to standard release equations, and the best fit was obtained with the Higuchi model of the hydrogel. Copyright © 2008 John Wiley & Sons, Ltd.     

Thermally induced core-shell type hydrogel beads having interpenetrating polymer network (IPN) structure

Monodisperse hydrogel beads composed of calcium alginate and crosslinked polyNIPAAm (N-isopropylacrylamide) were synthesized based on a simultaneous interpenetrating network process. With increasing the temperature above the phase transition temperature of polyNIPAAm, a core-shell type of hydrogel beads was developed; polyNIPAAm-enriched core region and Ca-alginate-enriched outer shell layer were observed. The thermally reversible formation of the core-shell double structure in the IPN hydrogel beads was applied for the temperature modulated drug release using indomethacin as a model drug.     

Hydroxypropyl chitosan bearing beta-cyclodextrin cavities: synthesis and slow release of its inclusion complex with a model hydrophobic drug

Hydroxypropyl chitosan-graft-carboxymethyl beta-cyclodextrin (HPCH-g-CM beta-CD) was synthesized by grafting CM beta-CD onto HPCH using water soluble 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) as the condensing agent. Due to the presence of hydrophobic beta-CD rings onto the HPCH backbone, this polymer can be used as a matrix for controlled drug release. The adsorption of a hydrophobic model drug, ketoprofen, by HPCH-g-CM beta-CD microparticles (using tripolyphosphate as an ionic crosslinking agent) fitted well in the Langmuir isotherm equation. The drug dissolution profile showed that HPCH-g-CM beta-CD microparticles provided a slower release of the entrapped ketoprofen than chitosan, and the release behavior was influenced by the pH value of the medium. These results suggest that beta-CD grafted with chitosan derivatives may become a potential biodegradable delivery system to control the release of hydrophobic drugs with pH-responsive capability.     

pH敏感型聚谷氨酸/透明质酸基互穿网络医用水凝胶的制备及表征

生物材料是推动生物医学领域日新月异变化的基石,医用水凝胶作为重要成员,近年来表现出蓬勃发展的态势。文章介绍了一种新型可注射的、以生物相容性方法交联的聚谷氨酸(Poly (γ-glutamic acid), PGA)/透明质酸(Hyaluronic acid, HA)复合水凝胶。研究首先采用EDC/NHS方法合成了酪胺(Tyramine,Ty)接枝聚谷氨酸的PGA-Ty前体大分子及半胱胺(Cysteamine, CA)修饰透明质酸的HA-CA前体大分子。两种前体大分子的结构分别使用核磁和红外进行了确证。得到的两种前体大分子在低浓度双氧水和辣根过氧化物酶(Horseradish Peroxidase, HRP)的共同作用下,于水相中交联得到互穿网络(Interpenetrating Network, IPN)水凝胶。实验对IPN水凝胶样品的系列性能,如平衡含水量、内部形貌、酶降解速率以及力学性能等进行了测试,并选取了盐酸四环素为药物模型对凝胶的体外药物释放行为、体外抗菌效果进行了测评。凝胶材料的细胞毒性及凝胶支架对细胞3D培养的效果证明其生物相容性优异,体外包埋的细胞经72h培养,未表现出明显细胞毒性。系列数据证明,该种水凝胶可以设计成为pH敏感型的药物控释载体材料,并因其良好的生物相容性,也有作为细胞支架、创伤辅料等其它生物医用材料的潜力。     

A novel pH‐ and thermo‐sensitive PVP/CMC semi‐IPN hydrogel: Swelling,phase behavior,and drug release study

Poly(N‐vinyl‐pyrrolidone) (PVP) hydrogel has been considered as a very interesting and promising thermosensitive material. The most vital shortcoming of PVP hydrogel as thermosensitive material is that it does not exhibit thermosensitivity under usual conditions. In this work, semi‐interpenetrating polymer network (semi‐IPN) hydrogels based on PVP and carboxymethylcellulose (CMC) were prepared. The volume phase transition temperature (VPTT) of the hydrogels was determined by swelling behavior and differential scanning calorimetry (DSC). The results showed that the VPTT was significantly dependent on CMC content and the pH of the swelling medium. The amount of CMC in the semi‐IPN hydrogels was 0.050, 0.075, and 0.100 g, the VPTT in buffer solution of pH 1.2 was 29.9 °C, 27.5 °C and 24.5 °C, respectively. In addition, the VPTT occurred in buffer solution of pH 1.2, but did not appear in alkaline medium. Bovine serum albumin (BSA) as a model drug was loaded and the in vitro release studies were carried out in different buffer solutions and at different temperatures. The results of this study suggest that PVP/CMC semi‐IPN hydrogels could serve as potential candidates for protein drug delivery in the intestine. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1749–1756, 2010     

Synthesis,characterization and evaluation of semi‐IPN hydrogels consisted of poly(methacrylic acid) and guar gum for colon‐specific drug delivery

The semi‐IPN hydrogels consisting of poly(methacrylic acid) and guar gum (GG) are prepared at room temperature using water as solvent. 5‐aminosalicylic acid (5‐ASA) is entrapped in the hydrogel in the synthesis of hydrogel and all entrapment efficiencies are found above 85%. The hydrogel shows excellent pH‐sensitivity. It exhibited minimum swelling in an acidic pH medium through the formation of a complex hydrogen‐bonded structure and maximal swelling due to the electrostatic repulsion due to the ionization of the carboxylic groups in pH 7.4 medium. The degradation in vitro shows that the degree of degradation (R%) depended on the concentration of cross‐linking agent and content of GG. The hydrogel shows a minimum release of 5‐ASA due to the complex hydrogen bonded structure of the hydrogels in the medium of pH 2.2. The enzymatic degradation of hydrogels by cecal bacteria can accelerate the release of 5‐ASA entrapped in the hydrogel in pH 7.4 medium. Copyright © 2007 John Wiley & Sons, Ltd.     

Stimuli-responsive chitosan-graft-poly(N-vinylcaprolactam) as a promising material for controlled hydrophobic drug delivery

A novel type of pH- and thermo-responsive copolymer, chitosan-graft-poly(N-vinylcaprolactam) (chitosan-g-PNVCL), was prepared by grafting carboxyl-terminated poly(N-vinylcaprolactam) (PNVCL-COOH) chains onto a chitosan backbone as a drug-delivery carrier. The formation of chitosan-g-PNVCL was confirmed by FT-IR and 1H NMR techniques. Chitosan-g-PNVCL showed a definite phase transition at 32 degrees C as occurs in pure PNVCL. The swelling degree of the chitosan-g-PNVCL beads was found to be higher at pH 2.2 than at pH 7.4. Moreover, the swelling degree of the beads decreased with increased environmental temperature. Compared to the chitosan beads, the release profile of chitosan-g-PNVCL beads showed a slower and more controlled release of the entrapped ketoprofen. The release behavior of the chitosan-g-PNVCL beads was influenced by both the pH and temperature of the medium. The MTT assay showed no obvious cytotoxicity of chitosan-g-PNVCL against a human endothelial cell line over a concentration range of 0-400 microg x mL(-1). These results suggest that chitosan-g-PNVCL could be a potential stimuli-responsive material for controlled drug delivery, and it may improve the bioavailability, efficacy, and compliance of the encapsulated drugs. [Reaction: see text].     

羧甲基壳聚糖水凝胶制备及其在药物控释中的应用

以戊二醛为交联剂制备了一系列羧甲基壳聚糖pH敏感水凝胶 .研究了合成条件对羧甲基壳聚糖水凝胶溶胀性能的影响 .实验结果表明羧甲基壳聚糖的脱乙酰度、交联剂用量对水凝胶溶胀率的影响较大 .pH=3 0时 ,水凝胶收缩 ,而pH =1 0 ,5 0 ,7 4 ,9 0时 ,水凝胶溶胀 ,且在碱性条件下水凝胶的溶胀率远大于酸性条件下的溶胀率 .包埋在此水凝胶中的水杨酸释放随载药介质的pH值和水凝胶半径大小的变化而显著不同 ,pH =1 0条件下载药的水凝胶的释药率大于pH =7 4 ,12 0条件下的释药率 ,且水凝胶的半径越大 ,释药速度和释药率也越大     

Physicochemical characterization and drug release properties of PDMAEMA/OSA Semi‐IPN hydrogels with microporous structure

A new poly(2‐(dimethylamino) ethyl methacrylate)/oxidized sodium alginate (PDMAEMA) semi‐interpenetrating network (Semi‐IPN) hydrogel with microporous structure was prepared by using PDMAEMA microgels as an additive during the polymerization/crosslinking process. The interior morphology characterized by scanning electron microscopy showed the Semi‐IPN hydrogels have different pore sizes by changing the amount of microgels. The hydrogels were also characterized by using Fourier transform infrared and DSC. The swelling behaviors of hydrogels indicated that the hydrogels have excellent pH and temperature sensitivity. Bovine serum albumin was entrapped in the hydrogels and the in vitro drug release profiles were established in different buffer solutions at various temperatures. The release behaviors of the model drug were dependent on the pore size of the hydrogels and environmental temperature/pH, which suggested that these materials have potential application as intelligent drug carriers. Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation and properties of poly(N‐isopropylacrylamide)/poly(N‐isopropylacrylamide) interpenetrating polymer networks for drug delivery

A novel poly(N‐isopropylacrylamide) (PNIPA)/PNIPA interpenetrating polymer network (IPN) was synthesized and characterized. In comparison with conventional PNIPA hydrogels, the shrinking rate of the IPN hydrogel increased when gels, swollen at 20 °C, were immersed in 50 °C water. The phase‐transition temperature of the IPN gel remained unchangeable because of the same chemical constituent in the PNIPA gel. The reswelling kinetics were slower than those of the PNIPA hydrogel because of the higher crosslinking density of the IPN hydrogel. The IPN hydrogel had better mechanical strength because of its higher crosslinking density and polymer volume fraction. The release behavior of 5‐fluorouracil (5‐Fu) from the IPN hydrogel showed that, at a lower temperature, the release of 5‐Fu was controlled by the diffusion of water molecules in the gel network. At a higher temperature, 5‐Fu inside the gel could not diffuse into the medium after a burst release caused by the release of the drug on the surface of the gel. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1249–1254, 2004     

A novel dual thermo- and pH-responsive silver nanocomposite hydrogel as a drug delivery system

The purpose of this study was to develop a novel dual thermo- and pH-responsive silver nanocomposite hydrogel (SNH) for drug release applications. This smart SNH was prepared in a facile one-pot method by in situ reduction of silver ions in salep solution and then grafting of poly(vinylpyrrolidone-co-acrylic acid) onto it. The SNH was characterized by transmission electron microscopy (TEM), scanning electron microscopy with energy-dispersive X-ray analysis (SEM–EDAX), thermo-gravimetric analysis (TGA), Fourier transform infrared (FT-IR), UV–Vis spectroscopy, and cyclic voltammetry. The dependence of swelling properties of the prepared SNH on the reaction variables (such as monomer, Ag NO₃, and cross-linker concentrations), temperature, pH, and salt was investigated. The potential of obtained SNH was examined for the deferasirox release from prepared hydrogel under different temperatures and pHs. The evaluation of release mechanism and determination of diffusion coefficients were also studied. In addition, SNH showed good antibacterial potentials. The results of this study provide valuable information regarding the development of dual stimuli-sensitive SNH for biomedical applications.     

Biodegradable and antibacterial poly(azomethine‐urethane)‐chitosan hydrogels for potential drug delivery application

In this study, biodegradable and antibacterial poly(azomethine‐urethane) (PAMU)‐ and chitosan (CS)‐based hydrogels have been prepared for controlled drug delivery applications. Structural and morphological characterizations of the hydrogels were performed via Fourier transform‐infrared and scanning electron microscopy analyses. Thermal stability, hydrophilicity, swelling, mechanical, biodegradation, protein absorption properties, and drug delivery application of PAMU‐ and CS‐based hydrogels were also investigated. The swelling performance of the hydrogels was studied in acidic, neutral, and alkaline media. Swelling results showed that the hydrogels have higher swelling capacity in acidic and alkaline media than neutral medium. Biodegradation experiments of the hydrogels were also studied via hydrolytic and enzymatic experiments. The drug release property of the hydrogel was carried out using 5‐fluoro uracil (5‐FU), and 5‐FU release capacity of the hydrogels was found in the range from 40.10% to 58.40% after 3 days.     

Molecularly imprinted cryogel as a pH-responsive delivery system for doxorubicin

In this study, implantable and degradable molecularly imprinted cryogel was prepared for pH-responsive delivery of doxorubicin. Cryogel discs were synthesized using amino acid-based functional monomer with HEMA and gelatin. The molecularly imprinted discs were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, degradation and swelling tests. In vitro delivery experiments were carried out in order to examine the effects of medium pH and drug content. The degree of degradation of composite cryogels was found to be 83.45±1.86% after 56 days. The release profiles of DOX from molecularly imprinted cryogel discs exhibit a biphasic delivery. It was observed that an initial burst release step from 0 to 12 h was followed by a slower and sustained release. Release rate of DOX from cryogel discs increased in more acidic conditions. Kinetic studies showed that a combination of diffusion and erosion control is mainly responsible from the general release behaviors of molecularly imprinted cryogel discs.     

Studies in the development of nateglinide loaded calcium alginate and chitosan coated calcium alginate beads

Nateglinide loaded alginate-chitosan beads were prepared by ionic gelation method for controlling the drug release by using various combinations of chitosan and Ca2+ as cation and alginate as anion. IR spectrometry, scanning electron microscopy, differential scanning calorimetry and X-ray powder diffractometry were used to investigate the physicochemical characteristics of the drug in the bead formulations. The calcium content in beads was determined by atomic absorption spectroscopy. The swelling ability of the beads in different media (pH 1.2, 4.5, 6.8) has been found to be dependent on the presence of polyelectrolyte complex of the beads and the pH of the media. The ability to release the Nateglinide was examined as a function of chitosan and calcium chloride content in the gelation medium. It is evident that the rate of drug release and its kinetics could be controlled by changing the chitosan and the calcium chloride concentrations. Calcium alginate beads released more than 95% of drug with in 8 h; whereas coated beads sustained the drug release and released only 75-80% of drug. The drug release mechanism analyzed indicates that the release follows either "anomalous transport" or "case-II transport".     

Preparation and release profiles of pH/temperature-responsive carboxymethyl chitosan/P(2-(dimethylamino) ethyl methacrylate) semi-IPN amphoteric hydrogel

Thermo- and pH-responsive semi-IPN polyampholyte hydrogels were prepared by using carboxymethyl chitosan and P(2-(dimethylamino) ethyl methacrylate) with N N'-Methylenebisacrylamide (BIS) as crosslinking agent. It was found that the semi-IPN hydrogel shrunk most at the isoelectric point (IEP) and swelled when pH deviated from the IEP. Its swelling ratio dramatically decreased between 30 and 50 °C at pH 6.8 buffer solution. It also showed good reversibility. The UV results showed that when the pH values of drug release medium were 3.7, 6.8, and 9 at 25 °C, the cumulative release rates reached 83.1, 51.5, and 72.2%, respectively. The release rate of coenzyme A (CoA) was higher at 50 °C than 37 and 25 °C at pH 6.8 solution. The release rate decreased with increasing the content of carboxymethyl chitosan at 25 °C in pH 6.8 solution. The results showed that semi-IPN hydrogel seems to be of great promise in pH/temperature drug delivery systems.     

Application of synthesized mesoporous titania microspheres for arsenic [(III) and (V)] uptake studies

The present work describes the application of radiotracer technique for studying uptake of arsenic on titanium hydroxide, commercial titanium dioxide (TiO₂) powder (anatase) and synthesized mesoporous titania beads in acidic, neutral, and alkaline conditions. Sol–gel templating method was used to prepare titania–polysaccharide composites, with different polymer contents. Mesoporous titania was obtained by heat treatment of the composite beads in a controlled environment. The synthesis process was optimized, using thermogravimetry analysis. X-ray diffraction patterns confirmed the formation of anatase pure phase titania (TiO₂) at 700 °C in different environments, and scanning electron microscopy studies confirmed uniform pore size distribution. The effect of surface area, polymer content and pH on uptake of arsenic(III) and (V) on the synthesized titania beads was also investigated. Arsenic(V) was found to be retained quantitatively on the titania beads synthesized from 0.8% polymer content titania–polymer composite precursor in neutral to alkaline conditions. Details of the results obtained are discussed.