Simultaneous spectrophotometric determination of cobalt,copper and nickel using 1-（2-thiazolylazo）-2-naphthol by chemometrics methods

The simultaneous determination of cobalt, copper and nickel using 1-（2-thiazolylazo）-2-naphthol （first figure of this article） by spectrophotometric method is a difficult problem in analytical chemistry, due to spectral interferences. By multivariate calibration methods, such as partial least squares （PLS） regression, it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction （OSC） is a preprocessing technique used for removing the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for PLS calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 550-750-nm range for 21 different mixtures of cobalt, copper and nickel. Calibration matrices were formed from samples containing 0.05-1.05, 0.05-1.30 and 0.05-0.80 μg·mL^-1 for cobalt, copper and nickel, respectively. The root mean square error of prediction （RMSEP） for cobalt, copper and nickel with OSC and without OSC were 0.007, 0.008, 0.011 and 0.031,0.037, 0.032 μg· mL^-1, respectively. This procedure allows the simultaneous determination of cobalt, copper and nickel in synthetic and real samples and good reliability of the determination was proved.     

Spectrophotometric Simultaneous Determination of Zinc(II), Manganese(II) and Iron(II) in Pharmaceutical Preparations Using OSC-PLS

The purpose of this paper is to develop a fast and sensitive spectrophotometric method for the simultaneous determination of zinc(II), manganese(II) and iron(II) in pharmaceutical preparations. The method presented in this work is based on the well-known reaction of these ions with 4-(pyridylazo)resorcinol (PAR)1. The application of quantitative chemometric methods, particularly PLS to multivariate chemical data is becoming more widespread owing to the availability of digitized spectroscop…     

Extractive Spectrophotometric Determination of Fluconazole by Ion-pair Complex Formation with Bromocresol Green

An extraction-spectrophotometric method for the determination of trace amounts of fluconazole was described. Fluconazole was effectively extracted as a 1 ： 1 ion-pair complex with bromocresole green （BCG） at pH 3.0 into chloroform, followed by spectrophotometric determination at 420 nm. Beer＇s law was obeyed over the range of 4-50 μg.mL^-1 of fluconazole with a detection limit of 3.7 μg.mL^-1 . The method is simple, rapid and sensitive. The procedure was applied to the determination of fluconazole in pharmaceutical preparations as well as its recovery from a blood serum sample.     

阿莫西林与维多利亚蓝B的显色反应及应用

The color reaction of amoxicillin with victoria blue B was studied.A novel visible spectrophotometric method for the determination of amoxicillin has been established.Under pH 8.50～10.5 condition,victoria blue B reacteds with amoxicillin to form red ion association complex.The maximum absorption wavelength was at 630nm and the apparent molar absorptivity(ε) was 2.67×10~4 L·mol~(-1)·cm~(-1) and the linear ranges was 0～5.5 mg·L~(-1).Amoxicillin obey Beer's law in definite concentration range.The optimum reaction conditions and the methodological precision were studied simultaneity.The method was simple and rapid and sensitive for the determination of amoxicillin.This method has been applied to the determination of amoxicillin is in the city sell amoxicillin medicament is in point and average recovery at 98.2%～101.0%.     

A New Extraction Spectrophotometric Method for the Determination of Phenol in Water

The product of the reaction among phenol, sodium nitroprusside and hydroxylamine hydrochloride in an alkaline solution can be extracted by chloroform in the presence of cetylpyridinium bromide(CPB), on the basis of which a new extraction spectrophotometric method for the determination of phenol in water is developed. The optimum determination wavelength is 720 nm. The molar absorptivity is 1.05×105 mol-1·L·cm-1 and the detection limit is 4.0 μg/L. For 30.0 and 60.0 μg/L standard solutions, the relative standard deviations are 4.5% and 2.2%, respectively(n=6). F values of the statistical analysis show that there is no notable difference between the proposed method and 4-AAP method. The results of the standard addition method for the natural water samples are satisfactory.     

Flow injection spectrophotometric determination of vitamin E in pharmaceuticals,milk powder and blood serum using potassium ferricyanide-Fe(Ⅲ) detection system

<正>A simple and sensitive flow injection spectrophotometric method is reported for the determination of vitamin E using potassium ferricyanide-Fe(Ⅲ) detection system.In the presence of vitamin E,Fe(Ⅲ)/ferricyanide reduces.The in situ reduced ions are then reacted with unreduced portion of ferricyanide/Fe(Ⅲ) to make soluble Prussian blue,which is monitored at absorption wavelength of 735 nm.Linear calibration graph was obtained in the concentration range of 0.1-40μg mL~(-1).The relative standard deviations (n=4) were in the range of 1.1-3.6%,with limits of detection(3 s blank) of 0.04μg mL~(-1).The proposed method allowed 12 injections h~(-1).The method is applied to determine vitamin E in pharmaceuticals,infant milk and blood serum samples using hexane extraction with the recoveries in the range of 93±3 to 97.5±4%.The method is validated using certified reference materials SRM 968c for blood serum samples.     

Development and Validation of Spectrophotometric Methods for the Determination of Cefetamet in Pharmaceutical Dosage Forms

Two simple and sensitive spectrophotometric methods for the determination of cefetamet in either pure form or in its pharmaceutical formulations were described. The method Ⅰ is based on the interaction of 3-methylbenzo[d]- thiazolin-2-one hydrazone （MBTH） with cefetamet in the presence of freshly prepared ferric chloride in a neutral medium. The resulting blue colored product has λmax at 628 nm. The method Ⅱ describes the reduction of ferric ion by the drug to ferrous ion followed by a complex formation reaction with 1,10-phenanthroline （1,10-phen） to form an orange red colored chromogen exhibiting 2max at 510 nm. The products are stable for more than 5 and 8 h respectively. Common excipients used as additives in pharmaceutical preparations do not interfere in the proposed methods. Both methods are highly reproducible and have been applied to a wide variety of pharmaceutical preparations and the results are comparable with those of official methods.     

SIMULTANEOUS DETERMINATION OF NEODYMIUM AND PRASEODYMIUM BY ZERO-ORDER AND FOURTH-ORDER DFRIVATIVE SPECTROPHOTOMETRY

With derivative spectrophotometric method,the complexes oflanthanides with 2-(5-bromo-2-pyridylazo)-5-diethylaminophen-ol(5-Br-PADAP)in the presence of octylphenol poly(ethyleneg-lycol)ether(TX-100)were studied.It is found that the maximumabsorption of fourth-order derivative spectra of the neodymiumcomplex by 4f electron transitions is at 579(+)nm and 582(-)nmwith molar derivative absorptivities of 5.2×10~3 1.mol~(-1).cm~(-1).The maximum absorption of the zero-order derivative spectra ofthe complexes for neodymium and praseodymium is at 580hm,themolar absorptivities are 1.47×10~5 l.mol~(-1).cm~(-1)for Nd and 1.26×10~5 l.mol~(-1).cm~(-1)for Pr.The component ratio of the complexis Nd:5-Br-PADAP=1:4.Beer's law is obeyed in the range of0-3.75μg of Nd and Pr in 25ml of solution.The method has beenused for the simultaneous determination of Nd and Pr in foursynthetic samples and the results obtained are satisfactory.     

Spectrophotometric determination of cationic surfactants by formation of ternary complexes with Fe(Ⅲ) and chrome azurol S

An extraction-free spectrophotometric method for the determination of cationic surfactants, such as cetylpyridinium chloride, cetyltrimethylammonium bromide and zephiramine is proposed, which is based on the formation of ternary complexes with Fe(Ⅲ) and chrome azurol S. The molar ratio of the complex is 2:1:1 (Fe(Ⅲ):chrome azurol S:cationic surfactant). The method is simple, rapid and sensitive, giving an apparent molar absorptivity of 4.5×104 L.mol-1.cm-1 and a linear range of 0.1-6.0 umol/L cationic surfactants. The total cationic surfactant content can be determined directly in aqueous solutions by measuring the absorbance at 680 nm (pH 5.8). The method has been successfully applied to water samples.     

A new kinetic spectrophotometric method for the determination of major metabolite of heroin in biological samples

This study describes a simple,rapid and selective catalytic kinetic spectrophotometric method for the determination of 6- monoacetylmorphine（6-MAM） as major metabolite of heroin in biological samples.The method is based upon the catalytic effect of 6-MAM on the oxidation of Janus Green by bromate in acid media.The reaction was followed spectrophotometrically by measuring the decrease in absorbance of Janus Green at 618 nm.The dependence of sensitivity on the reaction variables was studied.Under optimum conditions,two linear calibration curves over the range 0.1-1.0μg mL^-1 and 1.0-34.0μg mL^-1 of 6- MAM were obtained.The detection limit was 1.2×10²μg mL^-1 of 6-MAM.The relative standard deviations for six replicate determinations of 0.8 and 5.0μg mL^-1 of 6-MAM were 1.4 and 1.1%respectively.The effect of various species commonly associated with heroin in real samples was also investigated.The proposed method was successfully applied in human urine and serum samples with satisfactory results.     

Simultaneous kinetic spectrophotometric determination of norfloxacin and rifampicin in pharmaceutical formulation and human urine samples by use of chemometrics approaches

A kinetic spectrophotometric method with aid of chemometrics is proposed for the simultaneous determination of norfloxacin and rifampicin in mixtures. The proposed method was applied for the simultaneous determination of these two compounds in pharmaceutical formulation and human urine samples,and the results obtained are similar to those obtained by high performance liquid chromatography.     

HIGHLY SENSITIVE SPECTROPHOTOMETRY OF NIOBIUM

In pH2.0-3.0,niobium(V)forms molybdonlobic acid with sodiummolybdate.A spectrophotometric method has been developed for the deter-mination of niobium based on the formation of ion-associate compound ofmolybdoniobate with Butyl Rhodamine B in aqueous solution in the presenceof polyvinyl alcohol and 0.4-0.7 mol/L H_2SO_4.The maximum absorption ofion-associate compound exhioits at 85 nm and the molar absorptivity is7.5×1.0~5 L.mol~(-1).cm~(-1)for niobium.The new method has been applied tothe determination of microamounts niobium in silicate rock,when niobiumcontent is at the level of 8×10~(-3)%,with the relative standard deviationof about 3%.     

A spectrophotometric assay for biotinbinding sites of immobilized avidin

A rapid and sensitive spectrophotometric assay was developed for the measurement of biotin-binding sites of immobilized avidin. The method is based on the reaction of avidin with excess biotin followed by assay of the unbound biotin using the HABA (2-[4′-hydroxyazobenzene] benzoic acid) method. Three solids possessing variable amounts of monomeric avidin were examined; viz., succinamidopropyl-controlled-pore glass (CPG-500), crosslinked 6% beaded agarose (Sepharose-CL-6B**), and crosslinked bis-acrylamide/azlactone (3M Emphaze Biosupport Medium AB₁. Results indicate that the total biotin-binding sites of monomeric avidin immobilized on CPG-500, Sepharose-CL-6B, and 3M Emphaze are 0.229, 0.093, and 0.218 μmol biotin per mL beads, respectively. Assays for exchangeable biotinbinding sites gave values greater than 90% of the total sites. The spectrophotometric HABA method described is an alternative to assays based on tracers, thus the handling of radioactive material is avoided. The use of trade names in this publication does not imply endorsement by the North Carolina Agricultural Research Service of products named, nor criticism of similar ones not mentioned.     

The modef ication of Spectrophotometric Method for Coordinetion Nucleophilic Systems

A modified spectrophotometric method for coordination nucleo-philic substitution reactions between two kinds of ligands of mono-nuclear complexes MZi, MLj is proposed, which introduces a simpler formula for calculation and may be applied to complex systems and the hydrolysis of metal ions.As an illustration of the proposed method, we determined the spectrophotometric data of seven competitive systems in the solutions of various pH and calculated the successive stability constants and molar extinction coefficients, and the results are in good agreement with each other. The effect of the hydrolysis of metal ions on determined results depends on (1 + Σβa H-a) and (Σβi c.Czi)     

A novel method for the spectrophotometric determination of cefradine by using sodium nitroprusside as chromogenic reagent

A novel method is developed for the determination of cefradine by using sodium nitroprusside as chromogenic reagent. The experiment indicates that a russety product is formed by the reaction of cefradine with sodium nitroprusside in basic solution, and the maximum absorption wavelength （λmax） of russety product is 505 rim. And the sensitization of tetradecyl benzyl dimethyl ammonium chloride for the reaction of cefradine with sodium nitroprusside is remarkable, The apparent molar absorption coefficient （5505） is 2.81 × 103 L/mol cm. The linear equation isA = 0.0657 ＋ 0.00804C （μg/mL） in the range of 1.50-55.0μg/mL of cefradine with a correlation coefficient r = 0.9992, and the detection limit is 1.38 p,g/mL. This method has been applied to determine cefradine in capsule and tablet samples.     

Determination of Trace Amounts of Vanadium by Kinetic-Catalytic Spectrophotometric Methods

Kinetic-catalytic spectrophotometric methods were proposed for the determination of trace amounts of vanadium element as vanadium（Ⅳ） and/or V（Ⅴ） ions. The vanadium（Ⅳ） as VO^2＋ ion and/or vanadium（Ⅴ） as VO3^- ion showed a catalytic effect on the kinetic reactions between a color reagent such as methylthymol blue （MTB） or SPADNS and bromate in acidic media. The rate of decrease in the absorbance of the reagent MTB at 440 nm or SPADNS at 510 nm was proportional to concentration of V（Ⅳ） and/or V（Ⅴ） ions in the solution. The linear ranges for determination of vanadium were obtained in the range of 1.0-150 and 5.0-100.0 μg/L by the fixed-time and slope methods, respectively, with using MTB as reagent. In the presence of SPADNS as reagent, the calibration curves were made in the amplitude 1.0-200.0 and 5.0-150 μg/L of vanadium ion by the fixed-time and slope methods, respectively. Using fixed-time method, the limits of detection were obtained to be 0.5 and 0.7 μg/L of vanadium in the presence of MTB and SPADNS as reagents, respectively. Detection limits of vanadium by slope method and reagents of SPADNS and MTB were obtained to be 3.5 and 3.8 μg/L of vanadium, respectively. The proposed methods were applied successfully to determination of vanadium in synthetic and real samples.     

A Novel Synthesis of 2-Amino-2-deoxy-D-gluconic Acid and Its Complexation with Cu（Ⅱ） in Alkaline Medium

A novel synthesis of the functional carbohydrate 2-amino-2-deoxy-D-gluconic acid was introduced and itscomplex formation with Cu(Ⅱ)was investigated to obtain the stability constant for its further applications to thefood and pharmaceutical industries.The equilibrium was investigated by spectrophotometric measurements andprocessed by dual-series linear regression method.Results:the yield of 2-amino-2-deoxy-D-gluconic acid is 70%.The complexation molar ratio is 1:2,the molar apsorptivity of the complex is 39.906 L·mol~(-1)·cm~(-1) at 630 nm,and the stability constant β_n is 6.24×10~5.     

分光光度法同时测定两个干扰组份的研究 I.多波长数据线性回归法及其应用于同时测定微量锰和锌的探讨

In this paper, a linear regression method of multiwavelength data is proposed. The method, based on the difference of molar absorptivity between two coloured chelates at murti-wavelengths, can be applied to simultaneous spectrophotometric determination of two-interfering-component systems in the visible region. As an example, the availability as well as the optimum condition for simultaneous determination of Mn and Zn with 5-Br-PADAP in the presence of nonionic surfactant Triton X-100 have been studied. Measure the absorbance at 15 wavelengths over the range of 540-584 nm and treat the data with the suggested method, the linear correlation coefficients (γ) are found to be 0.998 in the synthetic mixtures containing microamounts of Mn and Zn with the concentration ratio from 1:10 to 10:1. The recoveries of both elements are 95-120% with the relative standard deviations (N=5) less than 17%. the method has been successfully used for direct determination of Mn and Zn in tap water. The new method proposed in this work is simple, fast and can be used for the analysis of two-interfering-component systems.     

Quantitative Structure Property Relations （QSPR） for Predicting Molar Diamagnetic Susceptibilities,xm, of Inorganic Compounds

For predicting the molar diamagnetic susceptibilities of inorganic compounds, a novel connectivity index ^mG based on adjacency matrix of molecular graphs and ionic parameter gi was proposed. The gi is defined as gi=（ni^0.5-0.91）^4·xi^0.5｜Zi^0.5, where Zi, ni, xi are the valence, the outer electronic shell primary quantum number, and the electronegativity of atom i respectively. The good QSPR models for the molar diamagnetic susceptibilities can be constructed from ^0G and ^1G by using multivariate linear regression （MLR） method and artificial neural network （NN） method. The correlation coefficient r, standard error, and average absolute deviation of the MLR model and NN model are 0.9868, 5.47 cgs, 4.33 cgs, 0.9885, 5.09 cgs and 4.06 cgs, respectively, for the 144 inorganic compounds. The cross-validation by using the leave-one-out method demonstrates that the MLR model is highly reliable from the point of view of statistics. The average absolute deviations of predicted values of the molar diamagnetic susceptibility of other 62 inorganic compounds （test set） are 4.72 cgs and 4.06 cgs for the MLR model and NN model. The results show that the current method is more effective than literature methods for estimating the molar diamagnetic susceptibility of an inorganic compound. Both MLR and NN methods can provide acceptable models for the prediction of the molar diamagnetic susceptibilities. The NN model for the molar diamagnetic susceptibilities appears more reliable than the MLR model.     

在L-缬氨酸介质中应用聚二苯并-18-冠醚-6-分离铈（III)

 A column chromatographic method has been developed for the separation and determination of cerium(Ⅲ) using poly［dibenzo-18-crown-6］. The separation was carried out in L-valine medium. The adsorption of cerium(Ⅲ) was quantitative from 1×10-1 to 1×10-4 mol/L L-valine. Amongst the various eluents, 1.0-8.0 mol/L hydrochloric acid, 1.0-8.0 mol/L hydrobromic acid, 1.0-8.0 mol/L perchloric acid, 1.0-2.0 mol/L sulfuric acid and 4.0-5.0 mol/L acetic acid, were found to be the efficient eluents for cerium(Ⅲ). The capacity of poly［dibenzo-18-crown-6］ for cerium(Ⅲ) was （0.428±0.01） mmol/g. The method was applied to the separation of cerium(Ⅲ) from associated elements link uranium(Ⅵ) and thorium(Ⅳ). It was also applied for the determination of cerium(Ⅲ) in geological samples. The method is simple, rapid and selective with good reproducibility (approximately±2%).