Biphasic hydrosilylation in ionic liquids: a process set for industrial implementation

The biphasic hydrosilylation of 1-hexadecene with siloxane B9800 in a range of ionic liquids is reported. Of the ionic liquids tested, [C(4)py][BF(4)] and [C(4)-3-pic][BF(4)] offer the optimum compromise between activity and catalyst retention. Several platinum precatalysts were screened, of which K(2)PtCl(4) and Pt(PPh(3))(4) were found to give the best performance; the former provides the highest activity, while the latter offers higher stability and recyclability, and depending on the conditions, both can afford either homogeneous or soluble nanoparticle catalysts as the active species. A number of reaction parameters were varied, and the effects of oxygen, water, and chloride impurities on the reaction were studied. In addition, since nanoparticle catalysts were observed, various strategies to stabilize nanoparticles were screened, but none of them resulted in a superior catalytic system.     

Carbon monoxide solubility in ionic liquids: determination, prediction and relevance to hydroformylation

The solubility of carbon monoxide in 37 ionic liquids and in some organic solvents has been determined using high-pressure (13)C NMR spectroscopy; a method for predicting the CO solubility is demonstrated, and it was shown that the rate of the hydroformylation of 5-hexen-2-one does not correlate with the CO solubility, as expected from the determined relative solubility of CO compared to H(2).     

Photomodulation of ionic interaction and reactivity: reversible photoconversion between imidazolium and imidazolinium

An interconversion system between imidazolium and imidazolinium has been proposed for the first time. Imidazolium and imidazolinium cations exhibit different reactivity due to the difference in the aromaticity and charge localization structure, which is successfully controlled by means of photoirradiation in the present system. A 4,5-dithiazolylimidazolium salt was prepared and studied as a new class of photochromic materials modulating electrostatic interactions and chemical reactivities. The photochromic 4,5-dithiazolylimidazolium showed reversible photoconversions between imidazolium open-form and imidazolinium closed-form upon successive irradiation with UV and visible light. The imidazolinium closed-form exhibited characteristic solvato- and ionochromisms in which the absorption maximum shifted by more than 80 nm depending on the solvent polarity and counteranions, whereas the imidazolium open-form showed no such solvent-dependent property. Because the corresponding nonionic 4,5-dithiazolylimidazole also did not exhibit the solvent-dependent absorption profile both in open- and closed-forms, the appearance of these chromisms in imidazolinium closed-form was attributed to the change in the extent of ionic interaction, which was brought about by the photoconversion of imidazolium to imidazolinium. The photoderived strong ionic interaction of imidazolinium with counteranion was further applied to the photocontrolled nucleophilic reaction system. Whereas the imidazolium open-form was inert to nucleophiles such as sodium methoxide, the imidazolinium closed-form was reactive to the nucleophilic reaction, demonstrating a photogated reaction system.     

The 2-position of imidazolium ionic liquids: substitution and exchange

The 2-position of imidazolium cations is known to be relatively acidic, leading to the useful Arduengo-type carbenes. At the same time, the acidity of this site can lead to undesired side reactions when using imidazolium-based ionic liquids as solvents. In this note, we describe the surprisingly facile deuterium exchange at this position and also the synthesis and exchange under modestly basic conditions (triethylamine) of a series of 2-methyl-substituted compounds.     

INDOLPhos: novel hybrid phosphine-phosphoramidite ligands for asymmetric hydrogenation and hydroformylation

Hybrid bidentate phosphine-phosphoramidite ligands are prepared in a modular 2-step sequence and their rhodium complexes display high selectivity in rhodium catalysed hydrogenation and hydroformylation reactions.     

Cation and anion substitution effects on the ultrafast dynamics of interionic interaction in imidazolium based ionic liquids

Room-temperature Ionic Liquids(ILs) have numerous unique properties that differ from those of conventional molecular solvents.Although the unique properties of ILs have been suggested to origin from their microscopic interionic interaction,detailed dynamics of interionic interaction of ILs has not been fully understood.Here,with the Femtosecond Optical Heterodyne-Detected Raman Induced Kerr Effect Spectroscopy(fs-OHD-RIKES),we measured the ultrafast dynamics of the interionic interaction of three typical im...     

Synthesis and characterization of catalytic iridium nanoparticles in imidazolium ionic liquids

The reduction of [Ir(cod)Cl](2) (cod=1,5-cyclooctadiene) dissolved in 1-n-butyl-3-methyl tetrafluoroborate, hexafluorophosphate and trifluoromethane sulphonate ionic liquids in the presence of 1-decene by molecular hydrogen produces Ir(0) nanoparticles. The formation of these nanoparticles follows the two-step [A-->B, A+B-->2B (k(1),k(2))] autocatalytic mechanism. The same mean diameter values of around 2-3 nm were estimated from in situ TEM and SAXS analyses of the Ir(0) nanoparticles dispersed in the ionic liquids and by XRD of the isolated material. XPS and EXAFS analyses clearly show the interactions of the ionic liquid with the metal surface demonstrating the formation of an ionic liquid protective layer surrounding the iridium nanoparticles. SAXS analysis indicated the formation of an ionic liquid layer surrounding the metal particles with an extended molecular length of around 2.8-4.0 nm depending on the type of the anion.     

Coordination studies on supramolecular chiral ligands and application in asymmetric hydroformylation

In this study we introduce a series of monodentate pyridine-based ligands for which the phosphorus coordination mode to rhodium can be controlled by the binding of Zn(II)-templates to the pyridyl group. A series of monodentate phosphoroamidite and phosphite ligands have been prepared and studied under hydroformylation conditions by in situ high-pressure NMR and IR techniques. These studies reveal the exclusive formation of rhodium hydride complexes in which the phosphorus atom of the ligand resides in an axial position, trans to the hydride, but only after addition of Zn(II)-template. In the absence of these templates the usual mono-coordinated rhodium hydrido complexes are formed, with the phosphorus ligated in the equatorial plane, cis to the hydride. The catalytic performance of these complexes is evaluated in asymmetric hydroformylation of unfunctionalised internal alkenes in which the supramolecular change is reflected in higher activity and selectivity.     

Surface tensions of imidazolium based ionic liquids: anion, cation, temperature and water effect

This work addresses the experimental measurements of the surface tension of eight imidazolium based ionic liquids (ILs) and their dependence with the temperature (288-353 K) and water content. The set of selected ionic liquids was chosen to provide a comprehensive study of the influence of the cation alkyl chain length, the number of cation substitutions and the anion on the properties under study. The influence of water content in the surface tension was studied for several ILs as a function of the temperature as well as a function of water mole fraction, for the most hydrophobic IL investigated, [omim][PF(6)], and one of the more hygroscopic IL, [bmim][PF(6)]. The surface thermodynamic functions such as surface entropy and enthalpy were derived from the temperature dependence of the surface tension values.     

Synthesis and characterization of Pt0 nanoparticles in imidazolium ionic liquids

The controlled decomposition of Pt2(dba)3 (dba = dibenzylideneacetone) dispersed in 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMI.BF4) and hexafluorophosphate (BMI.PF6) ionic liquids in the presence of cyclohexene by molecular hydrogen produces Pt0 nanoparticles. The formation of these nanoparticles follows the two-step [A --> B, A + B --> 2B (k1, k2)] autocatalytic mechanism. The catalytic activity in the hydrogenation of cyclohexene is influenced by the nature of the anion rather than the mean-diameter of the nanoparticles. Thus, higher catalytic activity was obtained with Pt0 dispersed in BMI.BF4 containing the less coordinating anion although these nanoparticles possess a larger mean diameter (3.4 nm) than those obtained in BMI.PF6 (2.3 nm). Similar mean diameter values were estimated from in situ XRD and SAXS. XPS analyses clearly show the interactions of the ionic liquid with the metal surface demonstrating the formation of an ionic liquid protective layer surrounding the platinum nanoparticles. SAXS analysis indicated the formation of a semi-organized ionic liquid layer surrounding the metal particles with an extended molecular length of around 2.8 nm in BMI.BF4 and 3.3 nm in BMI.PF6.     

Synthesis and characterization of nickel nanoparticles dispersed in imidazolium ionic liquids

The diameter and size-distribution of Ni nanoparticles prepared by the decomposition of [bis(1,5-cyclooctadiene)nickel(0)] organometallic precursor dissolved in 1-alkyl-3-methylimidazolium N-bis(trifluoromethanesulfonyl) amide ionic liquids depend on the length of the alkyl side-chain of the imidazolium ring. The increase of the organization range order of the ionic liquid that increases with that of the alkyl side-chain (from n-butyl to n-hexadecyl) induces the formation of nanoparticles with a smaller diameter and size-distribution. The cubic fcc Ni nanoparticles with 4.9 +/- 0.9 to 5.9 +/- 1.4 nm in mean diameter and monomodal size-distribution thus prepared are probably composed of a small cap layer of NiO around a core of Ni metal. The contribution of the oxide layer also depends on the medium i.e. the metal oxide ratio increases in salts containing four to eight carbons on their side-chains and then decreases as the number of carbons increases. The Ni nanoparticles dispersed in the ionic liquids are active catalysts for the hydrogenation of olefins under relatively mild reaction conditions.     

Transition-metal nanoparticles in imidazolium ionic liquids: recyclable catalysts for biphasic hydrogenation reactions

1-n-Butyl-3-methylimidazolium hexafluorophosphate room-temperature ionic liquid is not only suitable as a medium for the preparation and stabilization of iridium nanoparticles but also ideal for the generation of recyclable biphasic catalytic systems for hydrogenation reactions. Thus, Ir(0) nanoparticles with a mean diameter of 2 nm have been prepared by reduction of Ir(I) dissolved in the ionic liquid with H2. This catalytic solution can be reused several times for the biphasic hydrogenation of olefins under mild reaction conditions.     

The increase in diffraction efficiency of an azobenzene side-chain polymer using imidazolium and ammonium ionic liquids

The advancement of the information age has intensified the focus on photosensitive materials for information storage devices. To develop new photosensitive two azobenzene side-chain polymers i.e., poly(E)-3-(4-((4-nitrophenyl)diazenyl)phenoxy)propyl acrylate (polymer-1) and poly(E)-3-(4-((2-methoxy-4-nitrophenyl)diazenyl)phenoxy)propyl acrylate (polymer-2), were developed, and their diffraction efficiency was evaluated. The impact of ionic liquids (ILs) on the diffraction efficiency was evaluated by combining the polymers with imidazolium and ammonium families of ILs such as 1-butyl-3-methylimidazolium bromide [Bmim]Br, 1-ethyl-3-methyl-imidazolium-bromide [Emim]Br (imidazolium ILs), and triethylammonium methanesulfonate [TMEAS] (ammonium IL). The molecular interaction of both azobenzene side-chain polymers with the ILs was evaluated before the diffraction efficiency studies by employing UV–vis, FT-IR, and confocal Raman spectroscopies. The spectroscopic studies revealed the interaction of the polymers with the imidazolium and ammonium ILs. The mean diffraction efficiency of polymers-1 and ?2 were ～0.05 and ～0.022%, respectively. After the addition of the ILs, the diffraction efficiency increased. The highest diffraction efficiency was achieved with the polymer-2 + [Emim]Br system of 3.5% and polymer-2 + TEMS combination of 4.03%. Therefore, although the diffraction efficiency of polymer-1 was higher than that of polymer-2, after adding the ILs, the diffraction efficiency of polymer-2 surpassed that of the polymer-1 + ILs system.     

New bicyclic phosphorous ligands: synthesis, structure and catalytic applications in ionic liquids

New azadioxaphosphabicyclo[3.3.0]octane ligands showing a trans arrangement with regard to the two five-membered heterocycles, were obtained as a mixture of three conformers, in agreement with molecular modelling studies. The stability of oxaphosphane ligands was studied under basic catalytic conditions, monitored by NMR spectroscopy. Palladium catalytic systems containing these ligands were active in Suzuki C-C cross-coupling reactions between phenylboronic acid and aryl halides (bromide and chloride derivatives) bearing electron-donor or electron-withdrawing substituents, in both organic and ionic liquid solvents. The catalytic systems showed a high stability even under the most severe reaction conditions used in this work. The ionic liquid catalytic phase could be recycled up to ten times without significant activity loss.     

Origin of stereoinduction by chiral aminophosphane phosphinite ligands in enantioselective catalysis: asymmetric hydroformylation

The origin of stereoinduction by chiral aminophosphane phosphinite (AMPP) ligands in asymmetric hydroformylation was investigated with a theoretical approach. The roles of the stereogenic center at the aminophosphane phosphorus atom (NP*) and of the chirality of the backbone were analyzed by considering three experimentally tested cases: 1) P-stereogenic yielding high ee, 2) P-nonstereogenic yielding low ee, and 3) P-stereogenic yielding low ee. We succeeded in reproducing the experimentally observed trends for the three studied AMPP ligands. Our results indicated that alkene insertion into the rhodium-hydride bond is the selectivity-determining step, and not alkene coordination. Additional calculations on model systems revealed that the different nonbonding weak-type interactions of styrene with the substituents of the NP* stereogenic center in an axial position is responsible for stereodifferentiation. The chirality of the AMPP backbone plays a secondary role. The rationalization of the stereochemical outcome is not straightforward, because two competitive equatorial/axial reaction paths, showing opposite asymmetric induction, must be considered. Construction of stereochemical models and evaluation of stereoinduction for novel ligand systems suggested that two prerequisites are required to improve the performance of AMPP-type ligands in asymmetric hydroformylation: 1) combination of stereorecognition and stereohindrance by substituents at the NP* atom, and 2) more rigid backbones.     

Biphasic dimerisation of methylacrylate--immobilisation and stabilisation of cationic Pd-catalysts in ionic liquids by an ammoniumphosphine ligand

The first continuous, biphasic, Pd-catalysed dimerisation of methylacrylate is described. The biphasic system has been realised by using a tetrafluoroborate ionic liquid as catalyst medium and an ammoniumphosphine ligand to immobilise and stabilise the Pd-catalyst.     

Dual-functionalised ionic liquids: synthesis and characterisation of imidazolium salts with a nitrile-functionalised anion

A series of 'dual-functionalised' ionic liquids, comprising imidazolium cations with various functionalities and the nitrile functionalised anion [CH3CH(BF3)CH2CN]- have been prepared; some exhibit very low viscosities-a highly valuable property in many applications.     

Nanoscale Ru(0) particles: arene hydrogenation catalysts in imidazolium ionic liquids

The reduction of [Ru(COD)(2-methylallyl) 2] (COD = 1,5-cyclooctadiene) dispersed in various room-temperature ionic liquids (ILs), namely, 1- n-butyl-3-methylimidazolium (BMI) and 1- n-decyl-3-methylimidazolium (DMI), associated with the N-bis(trifluoromethanesulfonyl)imidates (NTf 2) and the corresponding tetrafluoroborates (BF 4) with hydrogen gas (4 bar) at 50 degrees C leads to well-dispersed immobilized nanoparticles. Transmission electron microscopy (TEM) analysis of the particles dispersed in the ionic liquid shows the presence of [Ru(0)] n nanoparticles (Ru-NPs) of 2.1-3.5 nm in diameter. Nanoparticles with a smaller mean diameter were obtained in the ILs containing the less coordinating anion (NTf 2) than that in the tetrafluoroborate analogues. The ruthenium nanoparticles in ionic liquids were used for liquid-liquid biphasic hydrogenation of arenes under mild reaction conditions (50-90 degrees C and 4 bar). The apparent activation energy of E A = 42.0 kJ mol (-1) was estimated for the hydrogenation of toluene in the biphasic liquid-liquid system with Ru-NPs/BMI.NTf 2. TEM analysis of the ionic liquid material after the hydrogenation reactions shows no significant agglomeration of the [Ru(0)] n nanoparticles. The catalyst ionic liquid phase can be reused several times without a significant loss in catalytic activity.     

Densities,viscosities and refractive indices of 1-alkyl-3-propanenitrile imidazolium chloride ionic liquids

In this study, a series of nitrile-functionalised imidazolium ionic liquids ([C₂CN Rim]Cl, where R?=?butyl, hexyl and octyl) were synthesised by reacting imidazole with acrylonitrile and then with butyl, hexyl and octyl chlorides, respectively. The structure of these compounds were established using ¹H NMR, FT-IR and elemental analyses. The densities and viscosities were measured at T?=?(293.15–353.15?K), whereas the refractive index was measured at T?=?(293.15–333.15?K) and empirical correlations were proposed to represent this study. The decomposition temperatures were determined using a thermogravimetric analyser. The thermal expansion coefficients were also calculated and reported.