Acrylonitrile–maleic anhydride copolymer membrane (II): effects of post‐treatment1

The effects of post‐treatment (including thermal treatment and base treatment) on the structure and performance of acrylonitrile–maleic anhydride (AN‐MA) copolymer membrane were investigated. The water flux decreased gradually (except the deviations when the temperature of thermal treatment was 50 °C or the time of thermal treatment was 50 min but rejection of bovine serum albumin increased slowly with increasing temperature or prolonging the time of thermal treatment. “The swelling effect of water in network” was proposed to explain the deviations. AN‐MA copolymer membrane is not resistant to a base. However, the performance of the membrane can be adjusted by treatment with a dilute base solution. Copyright © 2000 John Wiley & Sons, Ltd.     

热重法测定高马来酸酐含量苯乙烯-马来酸酐共聚物的组成

高马来酸酐含量苯乙烯-马来酸酐共聚物(SMA)是一种具有优良耐热性、刚性和尺寸稳定性的新型高分子材料.由于SMA分子中含有极性很强、反应活性很高的酸酐官能团,所以它被广泛应用于涂料、粘合剂的改性剂、地板抛光的乳化剂、复合材料和颜料的分散剂、水处理剂等领域[1-5].     

Synthesis of divinylbenzene–maleic anhydride microspheres using precipitation polymerization

Narrow disperse micron-range divinylbenzene-maleic anhydride microspheres have been prepared in near quantitative yields using precipitation polymerization. A variety of solvents were investigated for use as the reaction medium with a 40:60 mixture of methyl ethyl ketone and heptane providing the best results. The effects of solvent composition on particle size and morphology and monomer loading effects were also investigated. Particle size decreased with increasing solvency (increasing MEK fraction) while increases in monomer loading caused larger particle sizes. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2223–2227, 1998     

Chemical modification of E. coli L-asparaginase with polyethylene glycol grafted vinylpyrrolidone–maleic anhydride copolymer

A series of polyethylene glycol grafted vinylpyrrolidone–maleic anhydride copolymers [P(VMP)] was synthesized by radical copolymerization of vinylpyrrolidone, maleic anhydride and polyethylene glycol maleic acid monoester. Escherichia coli l -asparaginase was chemically modified with these copolymers. The modified l -asparaginase exhibited the complete loss of antigenicity towards anti-asparaginase serum from rabbit. The highest enzyme activity of the modified l -asparaginase without antigenicity was retained by 59% of the nonmodified one. The modified enzyme was also more resistant to trypsin in vitro. When tested in vivo, the native l -asparaginase was quickly cleared from the plasma of rabbits (half-life time: t_1/2=1.2 hr), whereas the modified enzyme showed prolonged clearance from plasma (t_1/2=53 hr). © 1997 John Wiley & Sons, Ltd.     

Functional films of maleic anhydride copolymers under physiological conditions

Reactivity and swelling of nanometer films of alternating maleic anhydride copolymers were investigated in dependence on the kind of comonomer and molar mass of copolymer in aqueous solution at pH 7.4 and pH 3.0 in order to reveal their characteristics under physiological conditions. Fully hydrolyzed (maleic acid) chains of the copolymers with styrene, propene, and ethylene comonomers covalently bound to SiO2 substrates showed a "mushroom" swelling behavior at pH 7.4 with a layer thickness scaling of N3/5. Decreasing the environmental pH was found to induce a comonomer-dependent shrinking or collapse of the immobilized polymers due to the change in ionization. From the swelling kinetics of non-hydrolyzed chains, the time constants and characteristics of swelling and anhydride hydrolysis were determined and found to depend on the type of comonomer. The short- and long-term swelling kinetics [l approximately t and approximately ln(t)1/2] were found to be in agreement with theoretical models of polymer swelling, while at intermediate time scales enhanced swelling was observed due to hydrolysis reaction of maleic anhydride groups. The findings elucidate the variety of properties of maleic anhydride copolymer films under physiological conditions, which can advantageously be applied for biofunctionalization of different templates.     

Radiation-induced graft polymerization of maleic acid and maleic anhydride onto ultra-fine powdered styrene–butadiene rubber (UFSBR)

The functionalization of ultra-fine powdered styrene–butadiene rubber (UFSBR) was carried out using gamma radiation-induced graft polymerization of maleic acid (MA) and maleic anhydride (MAH), respectively. It was found that the graft yield of MA onto UFSBR increased rapidly up to the peak and then decreased with increasing MA content. Moreover, the peak shifted to the direction of lower MA content with increasing absorbed dose. Similarly, there was the peak of graft yield with increasing MAH content for grafting of MAH onto UFSBR, whereas the peak of graft yield was achieved at 10 wt% MAH content at different absorbed doses. On the other hand, increasing absorbed dose and decreasing monomer contents are useful to improve the graft efficiency of MA and MAH. At high dose and low monomer content, the graft yield of MAH onto UFSBR is higher than that of MA. FTIR spectra confirmed that both MA and MAH can be grafted successfully onto the UFSBR under gamma irradiation, respectively. Comparing with maleation of rubber by melt grafting, the graft yield of MAH on UFSBR is higher, which can be attributed to the network structure and nanometer size of UFSBR as well as high energy provided by radiation.     

Multifunctional,water‐soluble,C60‐pendant maleic anhydride copolymer

Starting from the synthesis of a new methanofullerene derivative bearing an alcohol group, we report on the preparation of a water‐soluble, fullerene‐pendant copolymer. This multifunctional, C₆₀‐pendant maleic anhydride copolymer was characterized by conductometric titration, Fourier transform infrared and ultraviolet spectroscopy, thermogravimetric analysis, and cyclic voltammetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5814–5822, 2005     

Thermal behavior of the maleic anhydride modified poly(3-hydroxybutyrate)

Poly(3-hydroxybutyrate), PHB has been structurally modified through reaction with maleic anhydride, MA. Transesterification reaction was carried out fixing the PHB and MA and besides time and temperature the concentration of the triethylamine (used as catalyst) was changed. Glass transition, melting and crystallization temperature obtained from DSC curves and thermal degradation temperatures obtained from TG traces were used to evaluate the influence of the reaction conditions on the modification of PHB according to factorial design. On the base of the results the optimum conditions are to perform the PHB modification reaction with MA reaction at 110°C for 1 h with 5% v/v triethylamine.     

Monoesterification of styrene–maleic anhydride copolymers with alcohols in ethyl benzene: Catalysis and kinetics

A kinetic investigation on the monoesterification reaction of the maleic anhydride residue (MA) in styrene-maleic anhydride copolymers with aliphatic alcohols was carried out in ethyl benzene solution. By comparison to classic catalysts such as tributylamine (TBA) and pyridine, 4-dimethylaminopyridine (4DMAP) is by far the most effective catalyst for this reaction. While both general base and nucleophilic mechanisms contribute to the reaction catalyzed by TBA or pyridine, a nucleophilic mechanism prevails with 4DMAP. This reaction is reversible, and its chemical equilibrium constant decreases significantly with increasing temperature. Both kinetic and thermodynamic results showed that in the presence of 4DMAP, the forward and reverse reactions are second and first order, respectively. The existence of side reactions, reactivity of two styrene-maleic anhydride copolymers of different MA contents as well as two aliphatic alcohols of different lengths are also addressed. © 1993 John Wiley & Sons, Inc.     

New potentially environmentally friendly copolymer of styrene and maleic acid—castor oil monoester

The maleic acid‐castor oil monoester (MACO) was synthesized and was used as monomer to synthesize a new potentially environmentally friendly copolymer of styrene and MACO (poly‐St/MACO) by suspension polymerization. Under the appropriate conditions, the poly‐St/MACO with yield of 81%, number average molecular weight of 44100 g/mol, and molecular weight distribution of 1.5 could be obtained. The chemical structures of the MACO and resulting copolymer were confirmed by Mass Spectrometry Infrared Spectroscopy and Nuclear Magnetic Resonance Spectroscopy H[1]. The results of thermogravimetric analysis and biodegradation test showed the poly‐St/MACO can be used as a new potentially environmentally friendly material with excellent thermal stability. Copyright © 2011 John Wiley & Sons, Ltd.     

Effects of divinylbenzene‐maleic anhydride copolymer hollow microspheres on crystallization behaviors,mechanical properties and heat resistance of poly(l‐lactide acid)

Divinylbenzene‐maleic anhydride copolymer hollow microspheres (DMs) were used as novel organic nucleating agents to promote crystallization of poly(l‐lactide acid) (PLLA). The effects of these DMs on crystal behaviors of the PLLA were investigated by differential scanning calorimeter (DSC), polarizing optical microscopy (POM), and wide angle X‐ray diffraction (WAXD). Both isothermal and non‐isothermal processes in DSC demonstrated that the DMs significantly altered the crystal behaviors of PLLA as both crystallization velocity and degree of crystallinity increased with increasing DM loadings from 0 to 3%. Our POM results also indicated that as nucleating agents, the DMs promoted nucleating densities and decreased spherulitic sizes. In addition, WAXD suggeted that the addition of DMs did not induce new types of crystals. Finally, our results showed that the ductility of the PLLA was enhanced by a small amount of DMs during the PLLA crystallization process since 0.5% DMs added to the PLLA resulted in 1.4‐fold increase in the elongation at break in comparision with the neat PLLA.     

Synthesis and micellization of amphiphilic poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride) block copolymers

Amphiphilic biodegradable block copolymers [poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride)] were synthesized by the melt polycondensation of poly(ethylene glycol) and sebacic anhydride prepolymers. The chemical structure, crystalline nature, and phase behavior of the resulting copolymers were characterized with ¹H NMR, Fourier transform infrared, gel permeation chromatography, and differential scanning calorimetry. Microphase separation of the copolymers occurred, and the crystallinity of the poly(sebacic anhydride) (PSA) blocks diminished when the sebacic anhydride unit content in the copolymer was only 21.6%. ¹H NMR spectra carried out in CDCl₃ and D₂O were used to demonstrate the existence of hydrophobic PSA domains as the core of the micelle. In aqueous media, the copolymers formed micelles after precipitation from water‐miscible solvents. The effects on the micelle sizes due to the micelle preparation conditions, such as the organic phase, dropping rate of the polymer organic solution into the aqueous phase, and copolymer concentrations in the organic phase, were studied. There was an increase in the micelle size as the molecular weight of the PSA block was increased. The diameters of the copolymer micelles were also found to increase as the concentration of the copolymer dissolved in the organic phase was increased, and the dependence of the micelle diameters on the concentration of the copolymer varied with the copolymer composition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1271–1278, 2006     

Controlled radical copolymerization of styrene and maleic anhydride and the synthesis of novel polyolefin‐based block copolymers by reversible addition–fragmentation chain‐transfer (RAFT) polymerization

Reversible addition–fragmentation chain transfer (RAFT) was applied to the copolymerization of styrene and maleic anhydride. The product had a low polydispersity and a predetermined molar mass. Novel, well‐defined polyolefin‐based block copolymers were prepared with a macromolecular RAFT agent prepared from a commercially available polyolefin (Kraton L‐1203). The second block consisted of either polystyrene or poly(styrene‐co‐maleic anhydride). Furthermore, the colored, labile dithioester moiety in the product of the RAFT polymerizations could be removed from the polymer chain by UV irradiation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3596–3603, 2000     

Synthesis of well‐defined copolymer of acrylonitrile and maleic anhydride via RAFT polymerization

Well‐defined copolymer of acrylonitrile (AN) and maleic anhydride (MAn) has been successfully synthesized via reversible addition‐fragmentation chain transfer polymerization. The polymerization kinetics and “living”/controlled features were thoroughly studied and confirmed. The thermal properties and spinnability of the prepared copolymers were investigated via differential scanning calorimetry, thermogravimetric analyzer, and electrospinning subsequently. When PAN‐co‐PMAn was used as precursors, nonwoven with “crosslinked” structures was obtained during electrospinning. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5263–5269     

Peroxide initiated maleic anhydride grafting: Structural studies on an ester‐containing copolymer and related substrates

Maleic anhydride (MAn) was grafted onto the low molecular weight esters methyl decanoate (MD) and methyl 2‐ethylhexanoate (MEH) using the free‐radical initiators Lupersol‐101 and ‐130; the esters were used as model compounds for the copolymer poly(ethylene‐co‐methyl acrylate). The grafted products in both cases were isolated from the unreacted ester and were subjected to extensive analysis using spectroscopic and chromatographic techniques. Analysis of the grafted material indicated the presence of one or more succinic anhydride (SAn) residues grafted to the ester. In the case of the multiply grafted material it has been established conclusively by ¹³C‐NMR using 2,3‐¹³C₂ labeled MAn that the multiple grafts exist as single units. A limited number of grafting experiments was performed on the copolymer in the melt and the graft‐modified copolymer was characterized spectroscopically. Single graft units were observed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1609–1618, 1999     

Synthesis and characterization of poly(d,l-lactide-co-glycolide) modified by maleic anhydride and 1,4-butanediamine

Bone tissue engineering is sought to apply strategies for bone defects healing biodegradable porous scaffolds without limitations and shortcomings. In this work, we have developed a novel maleic anhydride (MAH) and 1,4-butanediamine modified poly(lactide-co-glycolide) polymer (BMPLGA). The synthesized polymer was characterized by Fourier transform infrared spectrometry (FTIR), Nuclear magnetic resonance spectra (¹H NMR), gel permeation chromatography (GPC) and contact angle measurements. In addition, cell morphologies in the extracts and cell cytotoxity were also studied. The results showed that the BMPLGA was successfully obtained by introducing MAH and 1,4-butanediamine into PLGA in bulk. The introduction of anhydride and amino groups improved the hydrophilicity of PLGA. Fibroblastic cells showed normal morphologies in BMPLGA extracts, and the BMPLGA materials showed no cell cytotoxicity. The synthetic BMPLGA material may have potentials for biomedical applications due to improving hydrophilicity.     

Synthesis and characterization of poly(styrene‐maleic anhydride)‐montmorillonite nanocomposite

Poly(styrene‐maleic anhydride)‐montmorillonite nanocomposites were prepared by intercalation of layered montmorillonite with the polymer ions. Synthetic approaches including polymerization and phosphonium salt formation have been used for polymer intercalation and dispersion of the host layers in the polymer matrix. The ratio of the mineral in the composites ranged 30–50%. Wide‐angle X‐ray diffraction (WAXD) disclosed that the d₍₀₀₁₎ spacing between the internal lamellar surface were only expanding to about 13 and 15 Å according to the type of phosphonium salt suggesting packing of polymer molecules between the layers. Examination of these materials by scanning and transmission electron microscopy showed spherical nano size particles of average diameter, 350 nm. Copyright © 2002 John Wiley & Sons, Ltd.