O-氯丙基和O-氰丙基间苯二酚杯芳烃的合成，晶体结构和电化学性质

四烃基和四二茂铁基间苯二酚杯芳烃在丙酮回流条件和碳酸钾存在下用1-溴-3-氯丙烷或4-氯丁腈进行烃基化反应分别生成全取代的O-氯丙基和O-氰丙基间苯二酚杯芳烃,晶体结构测定表明烷基间苯二酚杯芳烃倾向于以全顺式构型存在,而芳基间苯二酚杯芳烃倾向于以顺-反-反式构型存在。本文还已经了四二茂铁基间苯二酚杯芳烃的电化学性质。     

Efficient Separation of cis‐ and trans‐1,2‐Dichloroethene Isomers by Adaptive Biphen[3]arene Crystals

Reported here is the highly efficient separation of industrially important cis‐ and trans‐1,2‐dichloroethene (cis‐DCE and trans‐DCE) isomers by activated crystalline 2,2′,4,4′‐tetramethoxyl biphen[3]arene (MeBP3) materials, MeBP3α. MeBP3 can be synthesized in excellent yield (99 %), and a cyclic pentamer is also obtained when using 1,2‐dichloroethane as the solvent. The structure of MeBP3 in the CH₃CN@MeBP3 crystal displays a triangle‐shape topology, forming 1D channels through window‐to‐window packing. Desolvated crystalline MeBP3 materials, MeBP3α, preferentially adsorb cis‐DCE vapors over its trans isomer. MeBP3α is able to separate cis‐DCE from a 50:50 (v/v) cis/trans‐isomer mixture, yielding cis‐DCE with a purity of 96.4 % in a single adsorption cycle. Single‐crystal structures and powder X‐ray diffraction patterns indicate that the uptake of cis‐DCE triggers a solid‐state structural transformation of MeBP3, suggesting the adaptivity of MeBP3α materials during the sorption process. Moreover, the separation can be performed over multiple cycles without loss of separation selectivity and capacity.     

One Pot Synthesis of Medicinally Important cis‐2‐Methyl‐4‐amino substituted‐1,2,3,4‐tetrahydroquinolines

A simple synthesis of medicinally important cis‐2‐methyl‐4‐azapan‐2‐one‐1,2,3,4‐tetrahydroquinolines/cis‐9‐(2‐methyl‐1,2,3,4‐tetrahydroquinolin‐4‐yl)‐9H‐carbazole was reported. Multicomponent one pot synthesis with anilines and N‐vinylcaprolactam/N‐vinyl carbazole via imino Diels‐Alder reaction by using antimony trichloride as catalyst and acetonitrile as solvent was employed. NMR technique (2D) was used to study the regio‐ and stereo‐chemistry of newly synthesized compounds. The cis diastereo‐selectivity of the products was predicted by COSY and NOESY studies.     

Insight into the Thermal Ring‐Opening Polymerization of Phospha[1]ferrocenophanes

A mixture of cis/trans isomers of phospha[1]ferrocenophanes equipped with one iPr group at the α position to the bridging PhP moiety was prepared. Both isomers (cis‐ 4 and trans‐ 4 ) were obtained as racemates and could be separated so that their thermal properties were investigated individually. The molecular structure of cis‐ 4 was determined by single‐crystal X‐ray analysis showing a tilt angle α=26.35(8)°. Interconversion between both isomers occurred in the melt at elevated temperatures and revealed that the trans isomer is thermodynamically more stable. Structural and thermodynamic data was complemented by DFT calculations (B3PW91/6‐311+G(d,p) and B3PW91‐D3(BJ)/6‐311+G(d,p)). Performance of thermal ring‐opening polymerization (ROP) of trans‐ 4 at 230 °C gave polymers and cyclic oligomers. Gel permeation chromatography (GPC) of the sulfurized polymer resulted in a molecular weight of 62.5 kDa (M_w) and a polydispersity index of 1.39 (PDI). Mass spectrometric analysis of the oligomers showed the presence of cyclic species from dimers to heptamers. After sulfurization, preparative thin layer chromatography led to the separation of three isomeric dimers. Structural characterization of these dimers by single‐crystal X‐ray analysis led to the conclusion that the Fe?Cp bond breaks during the thermal ROP process. A mechanism similar to the known mechanism of the photolytic ROP of ferrocenophanes is proposed.     

Synthesis and characterization of novel poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate

The melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L‐proline (N‐CBz‐Hpr) with cyclic carbonate [trimethylene carbonate (tri‐MC) or tetramethylene carbonate (tetra‐MC)] at a wide range of molar fractions in the feed produced new degradable poly(ester‐carbonate)s. The influence of reaction conditions such as polymerization time and temperature on the yield and inherent viscosity of the copolymers was investigated. The polymerizations were carried out in bulk at 140 °C with 1.5 wt % stannous octoate as a catalyst for 30 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, gel permeation chromatography, and Ubbelohde viscometry. The copolymers synthesized exhibited moderate molecular weights with rather narrow molecular weight distributions. The values of the glass‐transition temperature (T_g) of the copolymers depend on the molar fractions of cyclic carbonate. For the poly(N‐CBz‐Hpr‐co‐tri‐MC) system, with a decreased tri‐MC content from 93 to 16 mol %, the T_g increased from ?10 to 60 °C. Similarly, for the poly(N‐CBz‐Hpr‐co‐tetra‐MC) system, when the tetra‐MC content decreased from 80 to 8 mol %, the T_g increased from ?18 to 52 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐tri‐MC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐tri‐MC)s was evaluated from weight‐loss measurements. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1435–1443, 2003     

Crystal Structures and Emitting Properties of Trifluoromethylaminoquinoline Derivatives: Thermal Single‐Crystal‐to‐Single‐Crystal Transformation of Polymorphic Crystals That Emit Different Colors

2,4‐Trifluoromethylquinoline (TFMAQ) derivatives that have amine ( 1 ), methylamine ( 2 ), phenylamine ( 3 ), and dimethylamine ( 4 ) substituents at the 7‐position of the quinoline ring were prepared and crystallized. Six crystals including the crystal polymorphs of 2 (crystal GB and YG) and 3 (crystal B and G) were obtained and characterized by X‐ray crystallography. In solution, TFMAQ derivatives emitted relatively strong fluorescence (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =418–469 nm and Φ_f(s)=0.23–0.60) depending on the solvent polarity. From Lippert–Mataga plots, Δμ values in the range of 7.8–14 D were obtained. In the crystalline state, TFMAQ derivatives emitted at longer wavelengths (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464–530 nm) with lower intensity (Φ_f(c)=0.01–0.28) than those in n‐hexane solution. The polymorphous crystals of 2 and 3 emitted different colors: 2 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =470 and 530 nm with Φ_f(c)=0.04 and approximately 0.01 for crystal GB and YG, respectively; and 3 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464 and 506 nm with Φ_f(c)=0.28 and approximately 0.28 for crystal B and G, respectively. In both crystal polymorphs of 2 and 3 , crystals GB and G showed emission color changes by heating/melting/cooling cycles that were representative. By following the color changes in heating at the temperature below the melting point with X‐ray diffraction measurements and X‐ray crystallography, the single‐crystal‐to‐single‐crystal transformations from crystal GB to YG for 2 and from crystal B to G for 3 were revealed.     

Cinnamate‐functionalized poly(ester‐carbonate): Synthesis and its UV irradiation‐induced photo‐crosslinking

A functionalized cyclic carbonate monomer containing a cinnamate moiety, 5‐methyl‐5‐cinnamoyloxymethyl‐1,3‐dioxan‐2‐one (MC), was prepared for the first time with 1,1,1‐tri(hydroxymethyl) ethane as a starting material. Subsequent polymerization of the new cyclic carbonate and its copolymerization with L ‐lactide (LA) were successfully performed with diethyl zinc (ZnEt₂) as initiator/catalyst. NMR was used for microstructure identification of the obtained monomer and copolymers. Differential scanning calorimetry (DSC) was used to characterize the functionalized poly(ester‐carbonate). The results indicated that the copolymers displayed a single glass transition temperature (T_g) and the T_g decreased with increasing carbonate content and followed the Fox equation, indicative of a random microstructure of the copolymer. The photo‐crosslinking of the cinnamate‐carrying copolymer was also demonstrated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 161–169, 2009     

Synthesis and Characterization of a Novel Thermo‐Sensitive Copolymer of N‐Isopropylacrylamide and Dibenzo‐18‐crown‐6‐diacrylamide

Summary: A series of novel, thermo‐sensitive copolymers with different molar ratios of N‐isopropylacrylamide (NIPAM) and hydrophobic cis‐dibenzo‐18‐crown‐6‐diacrylamide (cis‐DBCAm) were prepared via free‐radical copolymerization. cis‐DBCAm with polymerizable end groups was successfully synthesized by reacting the corresponding amino crown ether with acryloyl chloride. The copolymers were characterized by FT‐IR and elemental analysis, and the thermo‐sensitivities of the copolymers were evaluated by measuring their lower critical solution temperatures (LCSTs) in the absence or presence of various metal ions. The results indicated that incorporation of cis‐DBCAm lowered LCSTs, and that the LCSTs of the copolymers decreased with the increase in cis‐DBCAm content in the copolymers. When the cavities of the crown ether units captured either K⁺ or Cs⁺ ions, the LCST of the respective copolymer–metal ion complex was further decreased, whereas the capture of Na⁺ or Li⁺ ions did not have a significant influence on the LCSTs of the copolymers.

Incorporation of cis‐DBCAm into PNIPAM resulted in a lower LCST. The LCST was decreased more when the cavities of the crown ether units captured K⁺ ions.     

N‐Tosyl‐l‐proline benzene hemisolvate: a rare example of a hydrogen‐bonded carboxylic acid dimer with symmetrically disordered H atoms

The carboxylic acid group is an example of a functional group which possess a good hydrogen‐bond donor (–OH) and acceptor (C=O). For this reason, carboxylic acids have a tendency to self‐assembly by the formation of hydrogen bonds between the donor and acceptor sites. We present here the crystal structure of N‐tosyl‐l ‐proline (TPOH) benzene hemisolvate {systematic name: (2S)‐1‐[(4‐methylbenzene)sulfonyl]pyrrolidine‐2‐carboxylic acid benzene hemisolvate}, C₁₂H₁₅NO₄S·0.5C₆H₆, (I), in which a cyclic R₂²(8) hydrogen‐bonded carboxylic acid dimer with a strong O—(H)…(H)—O hydrogen bond is observed. The compound was characterized by single‐crystal X‐ray diffraction and NMR spectroscopy, and crystallizes in the space group I2 with half a benzene molecule and one TPOH molecule in the asymmetric unit. The H atom of the carboxyl OH group is disordered over a twofold axis. An analysis of the intermolecular interactions using the noncovalent interaction (NCI) index showed that the TPOH molecules form dimers due to the strong O—(H)…(H)—O hydrogen bond, while the packing of the benzene solvent molecules is governed by weak dispersive interactions. A search of the Cambridge Structural Database revealed that the disordered dimeric motif observed in (I) was found previously only in six crystal structures.     

Analogues of α‐Campholenal (= (1R)‐2,2,3‐Trimethylcyclopent‐3‐ene‐1‐acetaldehyde) as Building Blocks for (+)‐β‐Necrodol (= (1S,3S)‐2,2,3‐Trimethyl‐4‐methylenecyclopentanemethanol) and Sandalwood‐like Alcohols

To complete our panorama in structure–activity relationships (SARs) of sandalwood‐like alcohols derived from analogues of α‐campholenal (= (1R)‐2,2,3‐trimethylcyclopent‐3‐ene‐1‐acetaldehyde), we isomerized the epoxy‐isopropyl‐apopinene (?)‐ 2d to the corresponding unreported α‐campholenal analogue (+)‐ 4d (Scheme 1). Derived from the known 3‐demethyl‐α‐campholenal (+)‐ 4a , we prepared the saturated analogue (+)‐ 5a by hydrogenation, while the heterocyclic aldehyde (+)‐ 5b was obtained via a Bayer‐Villiger reaction from the known methyl ketone (+)‐ 6 . Oxidative hydroboration of the known α‐campholenal acetal (?)‐ 8b allowed, after subsequent oxidation of alcohol (+)‐ 9b to ketone (+)‐ 10 , and appropriate alkyl Grignard reaction, access to the 3,4‐disubstituted analogues (+)‐ 4f,g following dehydration and deprotection. (Scheme 2). Epoxidation of either (+)‐ 4b or its methyl ketone (+)‐ 4h , afforded stereoselectively the trans‐epoxy derivatives 11a,b , while the minor cis‐stereoisomer (+)‐ 12a was isolated by chromatography (trans/cis of the epoxy moiety relative to the C₂ or C₃ side chain). Alternatively, the corresponding trans‐epoxy alcohol or acetate 13a,b was obtained either by reduction/esterification from trans‐epoxy aldehyde (+)‐ 11a or by stereoselective epoxidation of the α‐campholenol (+)‐ 15a or of its acetate (?)‐ 15b , respectively. Their cis‐analogues were prepared starting from (+)‐ 12a . Either (+)‐ 4h or (?)‐ 11b , was submitted to a Bayer‐Villiger oxidation to afford acetate (?)‐ 16a . Since isomerizations of (?)‐ 16 lead preferentially to β‐campholene isomers, we followed a known procedure for the isomerization of (?)‐epoxyverbenone (?)‐ 2e to the norcampholenal analogue (+)‐ 19a . Reduction and subsequent protection afforded the silyl ether (?)‐ 19c , which was stereoselectively hydroborated under oxidative condition to afford the secondary alcohol (+)‐ 20c . Further oxidation and epimerization furnished the trans‐ketone (?)‐ 17a , a known intermediate of either (+)‐β‐necrodol (= (+)‐(1S,3S)‐2,2,3‐trimethyl‐4‐methylenecyclopentanemethanol; 17c ) or (+)‐(Z)‐lancifolol (= (1S,3R,4Z)‐2,2,3‐trimethyl‐4‐(4‐methylpent‐3‐enylidene)cyclopentanemethanol). Finally, hydrogenation of (+)‐ 4b gave the saturated cis‐aldehyde (+)‐ 21 , readily reduced to its corresponding alcohol (+)‐ 22a . Similarly, hydrogenation of β‐campholenol (= 2,3,3‐trimethylcyclopent‐1‐ene‐1‐ethanol) gave access via the cis‐alcohol rac‐ 23a , to the cis‐aldehyde rac‐ 24 .     

Platinum‐Catalyzed Asymmetric Ring‐opening Reaction of Oxabenzonorbornadiene with Terminal Alkynes

A novel platinum‐catalyzed asymmetric ring‐opening reaction of oxabenzonorbornadiene with terminal alkynes is described. The reaction affords optically active cis‐2‐alkynyl‐1,2‐dihydronaphthalen‐1‐ols in moderate yields with good enantioselectivity in the presence of catalytic amounts of Pt(COD)Cl₂/(S)‐BINAP and an excess of zinc powder. The products were obtained exclusively with the relative cis‐configuration of the ring substituents and the prevalent (1R,2S)‐configuration of the stereocenters, as determined by single crystal X‐ray diffraction analysis.     

A comparative study of two polymorphs of bis(1‐hydroxy‐2‐methylpropan‐2‐aminium) carbonate

Alkanolamines have been known for their high CO₂ absorption for over 60 years and are used widely in the natural gas industry for reversible CO₂ capture. In an attempt to crystallize a salt of (RS)‐2‐(3‐benzoylphenyl)propionic acid with 2‐amino‐2‐methylpropan‐1‐ol, we obtained instead a polymorph (denoted polymorph II) of bis(1‐hydroxy‐2‐methylpropan‐2‐aminium) carbonate, 2C₄H₁₂NO⁺·CO₃²⁻, (I), suggesting that the amine group of the former compound captured CO₂ from the atmosphere forming the aminium carbonate salt. This new polymorph was characterized by single‐crystal X‐ray diffraction analysis at low temperature (100 K). The salt crystallizes in the monoclinic system (space group C2/c, Z = 4), while a previously reported form of the same salt (denoted polymorph I) crystallizes in the triclinic system (space group P, Z = 2) [Barzagli et al. (2012). ChemSusChem, 5 , 1724–1731]. The asymmetric unit of polymorph II contains one 1‐hydroxy‐2‐methylpropan‐2‐aminium cation and half a carbonate anion, located on a twofold axis, while the asymmetric unit of polymorph I contains two cations and one anion. These polymorphs exhibit similar structural features in their three‐dimensional packing. Indeed, similar layers of an alternating cation–anion–cation neutral structure are observed in their molecular arrangements. Within each layer, carbonate anions and 1‐hydroxy‐2‐methylpropan‐2‐aminium cations form planes bound to each other through N—H…O and O—H…O hydrogen bonds. In both polymorphs, the layers are linked to each other via van der Waals interactions and C—H…O contacts. In polymorph II, a highly directional C—H…O contact (C—H…O = 156°) shows as a hydrogen‐bonding interaction. Periodic theoretical density functional theory (DFT) calculations indicate that both polymorphs present very similar stabilities.     

Reduction of 3‐Aminoquinoline‐2,4(1H,3H)‐diones and Deamination of the Reaction Products

3‐Aminoquinoline‐2,4‐diones were stereoselectively reduced with NaBH₄ to give cis‐3‐amino‐3,4‐dihydro‐4‐hydroxyquinolin‐2(1H)‐ones. Using triphosgene (=bis(trichloromethyl) carbonate), these compounds were converted to 3,3a‐dihydrooxazolo[4,5‐c]quinoline‐2,4(5H,9bH)‐diones. The deamination of the reduction products using HNO₂ afforded mixtures of several compounds, from which 3‐alkyl/aryl‐2,3‐dihydro‐1H‐indol‐2‐ones and their 3‐hydroxy and 3‐nitro derivatives were isolated as the products of the molecular rearrangement.     

Preparation,Properties, and Reactions of Metal‐Containing Heterocycles. CX [1] Crystal Structure of 1, 1'‐Bis{[4‐(1, 10‐phenanthroline‐3‐yl‐ethynyl)‐2, 5‐dipropoxy‐phenyl]ethynyl}ferrocene

The crystal structure of 1, 1'‐bis{[4‐(1, 10‐phenanthroline‐3‐yl‐ethynyl)‐2, 5‐dipropoxy‐phenyl]ethynyl}ferrocene ( 1 ) is reported. This compound crystallizes with two chloroform solvent molecules in the monoclinic space group P2₁/c (No. 14), a = 15.4253(11), b = 23.2003(10), c = 17.2630(13) Å, β = 90.866(9)° and Z = 4. Both arms of the ferrocene moiety are parallel displaced with the four nitrogen atoms pointing to the same direction.     

Guest‐Triggered Supramolecular Isomerism in a Pillared‐Layer Structure with Unusual Isomers of Paddle‐Wheel Secondary Building Units by Reversible Single‐Crystal‐to‐Single‐Crystal Transformation

Solvothermal reaction of Zn(NO₃)₂ ? 4 H₂O, 1,4‐bis[2‐(4‐pyridyl)ethenyl]benzene (bpeb) and 4,4′‐oxybisbenzoic acid (H₂obc) in the presence of dimethylacetamide (DMA) as one of the solvents yielded a threefold interpenetrated pillared‐layer porous coordination polymer with pcu topology, [Zn₂(bpeb)(obc)₂] ? 5 H₂O ( 1 ), which comprised an unusual isomer of the well‐known paddle‐wheel building block and the trans–trans–trans isomer of the bpeb pillar ligand. When dimethylformamide (DMF) was used instead of DMA, a supramolecular isomer [Zn₂(bpeb)(obc)₂] ? 2 DMF ? H₂O ( 2 ), with the trans–cis–trans isomer of the bpeb ligand with a slightly different variation of the paddle‐wheel repeating unit, was isolated. In MeOH, single crystals of 2 were transformed by solvent exchange in a single‐crystal‐to‐single‐crystal (SCSC) manner to yield [Zn₂(bpeb)(obc)₂] ? 2 H₂O ( 3 ), which is a polymorph of 1 . SCSC conversion of 3 to 2 was achieved by soaking 3 in DMF. Compounds 1 and 2 as well as 2 and 3 are supramolecular isomers.     

Structure of Cyclic Aryl Thiosester Dimer Based on o—Phthaloyl Dichloride and Bis（4—mercaptophenyl）Sulfide

A Cyclic aryl thioester dimer was prepared by the reaction of o-phthaloyl dichloride and bis(4-mercaptophenyl)sulfide in good yield under pseudo-high dilution conditions via interfacial polycondensation.The structure of the cyclic dimer was confirmed by a conmbination of MALDI-TOF-Ms,FTIR,gel permeation chromatography and NMR analyses.The X-ray diffraction study of the single crystal of cyclic thioester dimer obtained form two sotutions reveals no severe internal strain on the cyclic structure.     

Hydrogen bonding in polyamino‐polyalcohols: a monohydrated cocrystal of 1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol iodide and 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol

In the title monohydrated cocrystal, namely 1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol iodide–1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol–water (1/1/1), C₆H₁₆N₃O₃⁺·I⁻·C₆H₁₅N₃O₃·H₂O, the neutral 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol (taci) molecule and the monoprotonated 1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol cation (Htaci⁺) both adopt a chair conformation, with the three O atoms in axial and the three N atoms in equatorial positions. The cation, but not the neutral taci unit, exhibits intramolecular O—H...O hydrogen bonding. The entire structure is stabilized by a complex three‐dimensional network of intermolecular hydrogen bonds. The neutral taci entities and the Htaci⁺ cations are each aligned into chains along [001]. In these chains, two O—H...N interactions generate a ten‐membered ring as the predominant structural motif. The rings consist of vicinal 2‐amino‐1‐hydroxyethylene units of neighbouring molecules, which are paired via centres of inversion. The chains are interconnected into undulating layers parallel to the ac plane, and the layers are further held together by O—H...N hydrogen bonds and additional interactions with the iodide counter‐anions and solvent water molecules.     

Ring‐opening metathesis polymerization of cis‐cyanocyclooct‐4‐ene: Search for active catalysts,variation of monomer to catalyst ratios and monomer concentrations

The ring‐opening metathesis polymerization (ROMP) of cis‐cyanocyclooct‐4‐ene initiated by ruthenium‐based catalysts of the first, second, and third generation was studied. For the polymerization with the second generation Grubbs catalyst [RuCl₂(?CHPh)(H₂IMes)(PCy₃)] (H₂IMes = N,N′‐bis(mesityl)‐4,5‐dihydroimidazol‐2‐ylidene), the critical monomer concentration at which polymerization occurs was determined, and variation of monomer to catalyst ratios was performed. For this catalyst, ROMP of cis‐cyanocyclooct‐4‐ene did not show the features of a living polymerization as M_n did not linearly increase with increasing monomer conversion. As a consequence of slow initiation rates and intramolecular polymer degradation, molar masses passed through a maximum during the course of the polymerization. With third generation ruthenium catalysts (which contain 3‐bromo or 2‐methylpyridine ligands), polymerization proceeded rapidly, and degradation reactions could not be observed. Contrary to ruthenium‐based catalysts of the second and third generation, a catalyst of the first generation was not able to polymerize cis‐cyanocyclooct‐4‐ene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Hydrogen bonding in cyclic imides and amide carboxylic acid derivatives from the facile reaction of cis‐cyclohexane‐1,2‐carboxylic anhydride with o‐ and p‐anisidine and m‐ and p‐aminobenzoic acids

The structures of the open‐chain amide carboxylic acid rac‐cis‐2‐[(2‐methoxyphenyl)carbamoyl]cyclohexane‐1‐carboxylic acid, C₁₅H₁₉NO₄, (I), and the cyclic imides rac‐cis‐2‐(4‐methoxyphenyl)‐3a,4,5,6,7,7a‐hexahydroisoindole‐1,3‐dione, C₁₅H₁₇NO₃, (II), chiral cis‐3‐(1,3‐dioxo‐3a,4,5,6,7,7a‐hexahydroisoindol‐2‐yl)benzoic acid, C₁₅H₁₅NO₄, (III), and rac‐cis‐4‐(1,3‐dioxo‐3a,4,5,6,7,7a‐hexahydroisoindol‐2‐yl)benzoic acid monohydrate, C₁₅H₁₅NO₄·H₂O, (IV), are reported. In the amide acid (I), the phenylcarbamoyl group is essentially planar [maximum deviation from the least‐squares plane = 0.060 (1) Å for the amide O atom] and the molecules form discrete centrosymmetric dimers through intermolecular cyclic carboxy–carboxy O—H...O hydrogen‐bonding interactions [graph‐set notation R₂²(8)]. The cyclic imides (II)–(IV) are conformationally similar, with comparable benzene ring rotations about the imide N—C_ar bond [dihedral angles between the benzene and isoindole rings = 51.55 (7)° in (II), 59.22 (12)° in (III) and 51.99 (14)° in (IV)]. Unlike (II), in which only weak intermolecular C—H...O_imide hydrogen bonding is present, the crystal packing of imides (III) and (IV) shows strong intermolecular carboxylic acid O—H...O hydrogen‐bonding associations. With (III), these involve imide O‐atom acceptors, giving one‐dimensional zigzag chains [graph‐set C(9)], while with the monohydrate (IV), the hydrogen bond involves the partially disordered water molecule which also bridges molecules through both imide and carboxy O‐atom acceptors in a cyclic R₄⁴(12) association, giving a two‐dimensional sheet structure. The structures reported here expand the structural database for compounds of this series formed from the facile reaction of cis‐cyclohexane‐1,2‐dicarboxylic anhydride with substituted anilines, in which there is a much larger incidence of cyclic imides compared to amide carboxylic acids.     

Novel,biodegradable, functional poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate bearing a pendent carboxylic group

Water‐soluble poly(ester‐carbonate) having pendent amino and carboxylic groups on the main‐chain carbon is reported for the first time. This article describes the melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) with 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) at a wide range of molar fractions. The influence of reaction conditions such as catalyst concentration, polymerization time, and temperature on the number average molecular weight (M_n) and molecular weight distribution (M_w/M_n) of the copolymers was investigated. The polymerizations were carried out in bulk at 110 °C with 3 wt % stannous octoate as a catalyst for 16 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, and gel permeation chromatography. The copolymers synthesized exhibited moderate molecular weights (M_n = 6000–14,700 g mol^?1) with reasonable molecular weight distributions (M_w/M_n = 1.11–2.23). The values of the glass‐transition temperature (T_g) of the copolymers depended on the molar fractions of cyclic carbonate. When the MBC content decreased from 76 to 12 mol %, the T_g increased from 16 to 48 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐MBC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐MBC)s was evaluated from weight‐loss measurements and the change of M_n and M_w/M_n. Debenzylation of 3 by catalytic hydrogenation led to the corresponding linear poly(ester‐carbonate), 4 , with pendent amino and carboxylic groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2303–2312, 2004