Ethylene‐Norbornene Terpolymerization with 5‐Vinyl‐2‐norbornene Using Single‐Site Catalysts

The incorporation of 5‐vinyl‐2‐norbornene (VNB) into ethylene‐norbornene copolymer was investigated with catalysts [Ph₂C(Fluo)(Cp)]ZrCl₂ ( 1 ), rac‐[Et(Ind)₂]ZrCl₂ ( 2 ), and [Me₂Si(Me₄Cp)^tBuN]TiCl₂ ( 3 ) in the presence of MAO by terpolymerizing different amounts of 5‐vinyl‐2‐norbornene with constant amounts of ethylene and norbornene at 60°C. The highest cycloolefin incorporations and highest activity in terpolymerizations were achieved with 1 . The distribution of the monomers in the terpolymer chain was determined by NMR spectroscopy. As confirmed by XRD and DSC analysis, catalysts 1 and 3 produced amorphous terpolymer, whereas 2 yielded terpolymer with crystalline fragments of long ethylene sequences. When compared with poly‐(ethylene‐co‐norbornene), VNB increased both the glass transition temperatures and molar masses of terpolymers produced with the constrained geometry catalyst whereas decreased those for the metallocenes.     

Synthesis and characterization of ethylene‐propylene‐1‐pentene terpolymers

Ethylene (E), propylene (P), and 1‐pentene (A) terpolymers differing in monomer composition ratio were produced, using the metallocenes rac‐ethylene bis(indenyl) zirconium dichloride/methylaluminoxane (rac‐Et(Ind)₂ZrCl₂/MAO), isopropyl bis(cyclopentadienyl)fluorenyl zirconium dichloride/methylaluminoxane (Me₂C(Cp)(Flu)ZrCl₂/MAO, and bis(cyclopentadienyl)zirconium dichloride, supported on silica impregnated with MAO (Cp₂ZrCl₂/MAO/SiO₂/MAO) as catalytic systems. The catalytic activities at 25 °C and normal pressure were compared. The best result was obtained with the first catalyst. A detailed study of ¹³C NMR chemical shifts, triad sequences distributions, monomer‐average sequence lengths, and reactivity ratios for the terpolymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 947–957, 2008     

Polymerization with metallocene catalysts. Hydrooligomerization and NMR investigations concerning the microstructure of poly(cyclopentenes)

Hydrooligomerizations and polymerizations of cyclopentene were carried out using C_S, C₂ and C_2v symmetric zirconocenes and methylaluminoxane as catalyst. The structure of the hydrotrimers was investigated by one- and twodimensional NMR spectroscopy and correlated to the structure of the polymers. The assignments for the ¹³C-NMR spectrum of the cis-1,3-enchained hydrotrimer made by Collins [3] are corrected. Cis-1,3-enchainment of the configurational base units in the poly(cyclopentenes) is confirmed. rac-[Me₂Si(Ind)₂]ZrCl₂/MAO catalysis features crystalline polymers and the erythrodiisotactic hydrotetramer indicating highly stereoselective insertion. Cp₂ZrCl₂/MAO and [Ph₂C(Fluo)(Cp)]ZrCl₂/MAO show none or low stereoselectivity respectively yielding amorphous polymers and both of the diastereomeric hydrotetramers.     

α‐olefin homopolymerization and ethylene/1‐hexene copolymerization catalysed by novel ansa‐group IV complexes/MAO system

The catalytic properties of a set of ansa‐complexes (R‐Ph)₂C(Cp)(Ind)MCl₂ [R = ^tBu, M = Ti ( 3 ), Zr ( 4 ) or Hf ( 5 ); R = MeO, M = Zr ( 6 ), Hf ( 7 )] in α‐olefin homopolymerization and ethylene/1‐hexene copolymerization were explored in the presence of MAO (methylaluminoxane). Complex 4 with steric bulk ^tBu group on phenyl exhibited remarkable catalytic activity for ethylene polymerization. It was 1.6‐fold more active than complex 11 [Ph₂C(Cp)(Ind)ZrCl₂] at 11 atm ethylene pressure and was 4.8‐fold more active at 1 atm pressure. The introduction of bulk substituent ^tBu into phenyl groups not only increased the catalytic activity greatly but also enhanced the content of 1‐hexene in ethylene/1‐hexene copolymerization. The highest 1‐hexene incorporation was 25.4%. In addition, 4 was also active for propylene and 1‐hexene homopolymerization, respectively, and low isotactic polypropylene (mmmm = 11.3%) and isotactic polyhexene (mmmm = 31.6%) were obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Tacticity of poly‐α‐olefins from poly‐1‐hexene to poly‐1‐octadecene

A systematic study of the influence of the α‐olefin size, the catalyst stereospecificity and the reaction temperature was done on the catalytic activity and tacticity of poly‐α‐olefins from 1‐hexene to 1‐octadecene. The metallocenes used were rac‐Et[Ind₂]ZrCl₂ ( 1 ) and Me₂C[Cp(9‐Flu)]ZrCl₂ ( 2 ) to obtain isotactic and syndiotactic polyolefins. Some catalysts giving atactic polymers were also used in order to study all the possible ¹³C NMR pentades. Catalytic activities increased and isotacticity and syndiotacticity decreased with temperature, but no real trend was found with the α‐olefin size. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4744–4753, 2005     

Synthesis and properties of poly‐1‐olefins

The oligomerization and polymerization of 1‐pentene using Cp₂ZrCl₂, Cp₂HfCl₂, [(CH₃)₅C₅]₂ZrCl₂, rac‐[C₂H₄(Ind)₂]ZrCl₂, [(CH₃)₂Si(Ind)₂]ZrCl₂, (CH₃)₂Si(2‐methylbenz[e]indenyl)₂ZrCl₂, Cp₂ZrCl{O(Me)CW(CO)₅}, Cp₂ZrCl(OMe) and methylaluminoxane (MAO) has been studied. The degree of polymerization was highly dependent on the metallocene catalyst. Oligomers ranging from the dimer of 1‐pentene to polymers of poly‐1‐pentene with a molar mass M_w = 149000 g/mol were formed. Cp₂ZrCl{O(Me)CW(CO)₅} is a new highly active catalyst for the oligomerization of 1‐pentene to low molecular weight products. The activity decreases in the order Cp₂ZrCl{O(Me)CW(CO)₅} > Cp₂ZrCl₂ > Cp₂ZrCl(OMe). Furthermore, poly‐1‐olefins ranging from poly‐1‐pentene to poly‐1‐octadecene were synthesized with (CH₃)₂Si(2‐methyl‐benz[e]indenyl)₂ZrCl₂ and methylaluminoxane (MAO) at different temperatures. The temperature dependence of the molar mass can be described by a common exponential decay function irrespective of the investigated monomer.     

Influence of the catalyst and polymerization conditions on the long‐chain branching of metallocene‐catalyzed polyethenes

A study was made on the effects of polymerization conditions on the long‐chain branching, molecular weight, and end‐group types of polyethene produced with the metallocene‐catalyst systems Et[Ind]₂ZrCl₂/MAO, Et[IndH₄]₂ZrCl₂/MAO, and (n‐BuCp)₂ZrCl₂/MAO. Long‐chain branching in the polyethenes, as measured by dynamic rheometry, depended heavily on the catalyst and polymerization conditions. In a semibatch flow reactor, the level of branching in the polyethenes produced with Et[Ind]₂ZrCl₂/MAO increased as the ethene concentration decreased or the polymerization time increased. The introduction of hydrogen or comonomer suppressed branching. Under similar polymerization conditions, the two other catalyst systems, (n‐BuCp)₂ZrCl₂/MAO and Et[IndH₄]₂ZrCl₂/MAO, produced linear or only slightly branched polyethene. On the basis of an end‐group analysis by FTIR and molecular weight analysis by GPC, we concluded that a chain transfer to ethene was the prevailing termination mechanism with Et[Ind]₂ZrCl₂/MAO at 80 °C in toluene. For the other catalyst systems, β‐H elimination dominated at low ethene concentrations. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 376–388, 2000     

Effective activation of metallocene catalysts with supported‐type Ph3CClO4 in ethylene polymerization

Supported type cocatalysts using triphenylcarbenium perchlorate (Ph₃CClO₄) were prepared by impregnation on inorganic carrier, magnesium chloride (MgCl₂) and applied to ethylene polymerizations with rac‐Et[Ind]₂ZrCl₂. Homogeneous polymerizations with Ph₃CClO₄ were also carried out for comparison. The activity of homogeneous polymerization was much lower than that obtained with methylaluminoxane (MAO). On the other hand, rac‐Et[Ind]₂ZrCl₂ activated by the supported type Ph₃CClO₄/MgCl₂ system displayed high activity comparable to that obtained with MAO. From the results of fractionation and polymerization of the rac‐Et[Ind]₂ZrCl₂‐Ph₃CClO₄/MgCl₂ catalyst system, it was found that the increased activity mainly came from the active species in the supernatant part. UV‐vis spectroscopic measurements combined with ICP analysis indicate that the active species in the supernatant fraction are composed of a stoichiometric amount of perchlorate and metallocene catalyst.     

Synthesis and characterization of iPP‐sPP stereoblock produced by a binary metallocene system

Stereoblock polypropylenes comprising of iPP and sPP segments are synthesized by polymerization of the following binary system of metallocenes: the C_s‐symmetric [2,7‐t‐Bu₂(Flu)₂Ph₂C(Cp)ZrCl₂] and the C₂‐symmetric rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂. Blends of samples made either by each catalyst individually (solution blend) with materials obtained with the mixed catalyst system (reactor blend) are compared. The simultaneous presence of MAO and DEZ, enhancing fast and reversible transfer of the growing chains between the two active centers, leads to the formation of a stereoblock microstructure. In this case, low molecular weight polymers are obtained. The junction between the blocks is qualitatively observed in ¹³C NMR. When made in toluene, the stereoblock material consists of a majority of syndiotactic sequences, whereas the ratio is more equilibrated when the polymerization was conducted in the more polar chlorobenzene. This is confirmed by the results obtained with ¹³C NMR, CRYSTAF, HT HPLC, DSC, SSA, WAXD, and optical microscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1422–1434     

Homogeneous tandem catalysis of the bis‐(diphenylphosphino)‐amine/chromium tetramerization catalyst with metallocene catalysts

Homogeneous tandem catalysis of the bis(diphenylphoshino)amine‐chromium oligomerization catalyst with the metallocenes Ph₂C(Cp)(9‐Flu)ZrCl₂ and rac‐EtIn₂ZrCl₂, is discussed. GC, CRYSTAF, and ¹³C NMR analysis of the products obtained from reactions at constant temperatures show that during tandem catalysis, α‐olefins, mainly 1‐hexene and 1‐octene, are produced from ethylene by the oligomerization catalyst and subsequently built into the polyethylene chain. At 40 °C the Cr/PNP catalyst acts as a tetramerization catalyst while the polymerization catalyst activity is low. Copolymerization of ethylene and the in situ produced α‐olefins have also been carried out by increasing the temperature from 40 °C, where primarily oligomerization takes place, to above 100 °C, where polymerization becomes dominant. The melting temperature of the polymer is dependent on the catalyst and cocatalyst ratios as well as on the temperature gradient followed during the reaction, while the presence of the oligomerization catalyst reduces the activity of the polymerization catalyst. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6847–6856, 2006     

First‐Row Transition‐Metal–Diborane and –Borylene Complexes

A combined experimental and quantum chemical study of Group 7 borane, trimetallic triply bridged borylene and boride complexes has been undertaken. Treatment of [{Cp*CoCl}₂] (Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) with LiBH₄ ? thf at ?78 °C, followed by room‐temperature reaction with three equivalents of [Mn₂(CO)₁₀] yielded a manganese hexahydridodiborate compound [{(OC)₄Mn}(η⁶‐B₂H₆){Mn(CO)₃}₂(μ‐H)] ( 1 ) and a triply bridged borylene complex [(μ₃‐BH)(Cp*Co)₂(μ‐CO)(μ‐H)₂MnH(CO)₃] ( 2 ). In a similar fashion, [Re₂(CO)₁₀] generated [(μ₃‐BH)(Cp*Co)₂(μ‐CO)(μ‐H)₂ReH(CO)₃] ( 3 ) and [(μ₃‐BH)(Cp*Co)₂(μ‐CO)₂(μ‐H)Co(CO)₃] ( 4 ) in modest yields. In contrast, [Ru₃(CO)₁₂] under similar reaction conditions yielded a heterometallic semi‐interstitial boride cluster [(Cp*Co)(μ‐H)₃Ru₃(CO)₉B] ( 5 ). The solid‐state X‐ray structure of compound 1 shows a significantly shorter boron–boron bond length. The detailed spectroscopic data of 1 and the unusual structural and bonding features have been described. All the complexes have been characterized by using ¹H, ¹¹B, ¹³C NMR spectroscopy, mass spectrometry, and X‐ray diffraction analysis. The DFT computations were used to shed light on the bonding and electronic structures of these new compounds. The study reveals a dominant B?H?Mn, a weak B?B?Mn interaction, and an enhanced B?B bonding in 1 .     

Reaction of the Pincer‐type Ligand {2, 6‐[P(O)(OEt)2]2‐4‐tert‐Bu‐C6H2}— with [Ph3C]+[PF6]—. Unprecedented Rearrangement and Carbon‐Carbon Bond Formation

The reaction of the organolithium derivative {2, 6‐[P(O)(OEt)₂]₂‐4‐tert‐Bu‐C₆H₂}Li ( 1 ‐Li) with [Ph₃C]⁺[PF₆]^— gave the substituted biphenyl derivative 4‐[(C₆H₅)₂CH]‐4′‐[tert‐Bu]‐2′, 6′‐[P(O)(OEt)₂]₂‐1, 1′‐biphenyl ( 5 ) which was characterized by ¹H, ¹³C and ³¹P NMR spectroscopy and single crystal X‐ray analysis. Ab initio MO‐calculations reveal the intramolecular O···C distances in 5 of 2.952(4) and 2.988(5)Å being shorter than the sum of the van der Waals radii of oxygen and carbon to be the result of crystal packing effects. Also reported are the synthesis and structure of the bromine‐substituted derivative {2, 6‐[P(O)(OEt)₂]₂‐4‐tert‐Bu]C₆H₂}Br ( 9 ) and the structure of the protonated ligand 5‐tert‐Bu‐1, 3‐[P(O)(OEt)₂]₂C₆H₃ ( 1 ‐H). The structures of 1 ‐H, 5 , and 9 are compared with those of related metal‐substituted derivatives.     

Facile Access to Transition‐Metal–Carbonyl Complexes with an Amidinate‐Stabilized Chlorosilylene Ligand

Three transition‐metal–carbonyl complexes [V( L )(CO)₃(Cp)] ( 1 ), [Co( L )(CO)(Cp)] ( 2 ), and [Co( L₂ )(CO)₃]⁺[CoCO)₄]^? ( 3 ), each containing stable N‐heterocyclic‐chlorosilylene ligands ( L ; L =PhC(NtBu)₂SiCl) were synthesized from [V(CO)₄(Cp)], [Co(CO)₂(Cp)], and Co₂(CO)₈, respectively. Complexes 1 , 2 , 3 were characterized by NMR and IR spectroscopy, EI‐MS spectrometry, and elemental analysis. The molecular structures of compounds 1 , 2 , 3 were determined by single‐crystal X‐ray diffraction.     

Renewable chain transfer agents for metallocene polymerizations: The effects of chiral monoterpenes on the polyolefin molecular weight and isotacticity

Monoterpenes were used as renewable chain transfer agents and polymerization solvents for metallocene/methylaluminoxane (MAO) catalysis. The polymerization of 1‐hexene, ethylene, and propylene in d‐limonene, hydrogenated d‐limonene and α‐pinene is reported. As detected by ¹H NMR analysis of the alkene region, chain transfer to d‐limonene yielded a higher percentage of trisubstituted alkenes. Size exclusion chromatography detected a decrease in molecular weight values resulting from chain transfer to d‐limonene. The [mmmm] pentads for isotactic polypropylene were characterized by ¹³C NMR and FTIR spectroscopy. Propylene polymerizations with the Et(Ind)₂ZrCl₂/MAO and Me₂Si(Ind)₂ZrCl₂/MAO catalyst systems in d‐limonene gave [mmmm] pentad values as high as 0.97. For the Et(Ind)₂ZrCl₂/MAO catalyst system at 0 °C, the mol fraction of [mmmm] pentads increased from 0.86 to 0.94 upon switching the solvent from toluene to d‐limonene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3150–3165, 2007     

[CpR(OC)Mo(μ‐η2:2‐P2)2FeCpR′] als Edukt für heterobimetallische Zweikerncluster mit P2‐ und CnRnP4‐n‐Liganden (n = 1, 2)

[Cp^R(OC)Mo(μ‐η^2:2‐P₂)₂FeCp^R′] as Educt for Heterobimetallic Dinuclear Clusters with P₂ and C_nR_nP_4‐n Ligands (n = 1, 2) The cothermolysis of [Cp^R(OC)Mo(μ‐η^2:2‐P₂)₂FeCp^R′] ( 1 ) and tBuC≡P ( 2 ) as well as PhC≡CPh ( 3 ) affords the heterobimetallic triple‐decker like dinuclear clusters [(Cp'''Mo)(Cp*′Fe)(P₃CtBu)(P₂)] ( 4 ), Cp''' = C₅H₂tBu₃‐1,2,4, Cp*′ = C₅Me₄Et, and [(Cp*Mo)(Cp*Fe)(P₂C₂Ph₂)(P₂)] ( 5 ) with a bridging tri‐ and diphosphabutadiendiyl ligand. 4 and 5 have been characterized additionally by X‐ray crystallography.     

Chemistry of N,S‐Heterocyclic Carbene and Metallaboratrane Complexes: A New η3‐BCC‐Borataallyl Complex

A high‐yielding synthetic route for the preparation of group 9 metallaboratrane complexes [Cp*MBH(L)₂], 1 and 2 ( 1 , M=Rh, 2 , M=Ir; L=C₇H₄NS₂) has been developed using [{Cp*MCl₂}₂] as precursor. This method also permitted the synthesis of an Rh–N,S‐heterocyclic carbene complex, [(Cp*Rh)(L₂)(1‐benzothiazol‐2‐ylidene)] ( 3 ; L=C₇H₄NS₂) in good yield. The reaction of compound 3 with neutral borane reagents led to the isolation of a novel borataallyl complex [Cp*Rh(L)₂B{CH₂C(CO₂Me)}] ( 4 ; L=C₇H₄NS₂). Compound 4 features a rare η³‐interaction between rhodium and the B‐C‐C unit of a vinylborane moiety. Furthermore, with the objective of generating metallaboratranes of other early and late transition metals through a transmetallation approach, reactions of rhoda‐ and irida‐boratrane complexes with metal carbonyl compounds were carried out. Although the objective of isolating such complexes was not achieved, several interesting mixed‐metal complexes [{Cp*Rh}{Re(CO)₃}(C₇H₄NS₂)₃] ( 5 ), [Cp*Rh{Fe₂(CO)₆}(μ‐CO)S] ( 6 ), and [Cp*RhBH(L)₂W(CO)₅] ( 7 ; L=C₇H₄NS₂) have been isolated. All of the new compounds have been characterized in solution by mass spectrometry, IR spectroscopy, and ¹H, ¹¹B, and ¹³C NMR spectroscopies, and the structural types of 4 – 7 have been unequivocally established by crystallographic analysis.     

Synthesis of branched polypropylene with isotactic backbone and atactic side chains by binary iron and zirconium single‐site catalysts

This article reports the use of a binary single‐site catalyst system for synthesizing comb‐branched polypropylene samples having isotactic polypropylene (iPP) backbones and atactic polypropylene (aPP) side chains from propylene feedstock. This catalyst system consisted of the bisiminepyridine iron catalyst {[2‐ArN?C(Me)]₂C₅H₃N}FeCl₂ [Ar = 2,6‐C₆H₃(Me)₂] ( 1 ) and the zirconocene catalyst rac‐Me₂Si(2‐MeBenz[e]Ind)₂ZrCl₂ ( 2 ). The former in situ generated 1‐propenyl‐ended aPP macromonomer, whereas the latter incorporated the macromonomer into the copolymer. The effects of reaction conditions, such as the catalyst addition procedure and the ratio of 1 / 2 on the branching frequency, were examined. Copolymer samples having a branching density up to 8.6 aPP side chains per 1000 iPP monomer units were obtained. The branched copolymers were characterized by ¹³C NMR and differential scanning calorimetry. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1152–1159, 2003     

Ionic complexes of 1,1′‐dimethyltitanocene(IV) dichloride with simple α‐amino acids: synthesis,structural characterisation and investigation on hydrolytic stability in aqueous solution

Five cationic complexes of the general formula [Cp′₂Ti(A)₂]²⁺ [Cl^?]₂ [Cp′ = η⁵‐(CH₃)C₅H₄ and A = glycine, 1 ; 2‐methylalanine, 2 ; N‐methylglycine, 3 ; L ‐alanine, 4 ; and D ‐alanine 5 ] were prepared by the reaction of Cp′₂TiCl₂ and the appropriate α‐amino acid in 1:2 molar ratio from methanol–water solution in high yield. Air‐stable crystalline solids, highly soluble in water, were characterized by means of elemental analysis, IR, Raman, ¹H, ¹³C and ¹⁴N NMR spectroscopy. The structure of compound 3 was determined by single crystal X‐ray crystallography: orthorhombic Pbca No. 61, a = 9.5310(3), b = 18.2980(5), c = 26.6350(5) Å, V = 4654 ų, Z = 8. Hydrolytic stability of all compounds in D₂O was investigated using ¹H NMR spectroscopy within the pD interval of 2.9–6.5. All compounds slowly decomposed during 24 h at pD = 2.94, forming a mixture of hydrolytic products [Cp′₂Ti(A)(D₂O)]²⁺, [Cp′₂Ti(D₂O)₂]²⁺ and respective α‐amino acids. By elevating pD to 4.0 and up to 6.5, a yellowish precipitate was formed, which indicates decomposition of the complexes. These compounds were characterized using elemental analyses, IR and Raman spectroscopy and attributed to oligomeric and/or polymeric structures described empirically by the formula Ti(Cp′)_xO_y(OH)_z (x = 0.65; y = 0.3, z = 1.9). Copyright © 2005 John Wiley & Sons, Ltd.     

Some mixed cyclopentadienyl–indenyl zirconium complexes with PhCH2 or PhCH2CH2 substituents in ethylene polymerization

(RCp)(R′Ind)ZrCl₂ complexes 1 – 6 (Cp = cyclopentadienyl; Ind = indenyl; 1 , R = PhCH₂ and R′ = H; 2 , R = PhCH₂ and R′ = PhCH₂; 3 , R = PhCH₂CH₂ and R′ = H; 4 , R = PhCH₂CH₂ and R′ = PhCH₂; 5 , R = o‐Me? PhCH₂CH₂ and R′ = H; 6 , R = o‐Me? PhCH₂ and R′ = H) were synthesized and characterized with ¹H NMR, elemental analysis, mass spectrometry, and infrared spectroscopy. Their catalytic behaviors were compared with those of (Et₃SiCp)(PhCH₂CH₂Cp)ZrCl₂, (PhCH₂Cp)₂ZrCl₂, (PhCH₂‐ CH₂Cp)₂ZrCl₂, (o‐Me? PhCH₂CH₂Cp)₂ZrCl₂, and (Ind)₂ZrCl₂ in ethylene polymerization in the presence of methylaluminoxane. Complex 5 showed high activity up to 2.43 × 10⁶ g of polyethylene (PE)/mol of Zr h, and complex 4 produced PE with bimodal molecular weight distributions. The methyl group at the 2‐position of phenyl in complex 5 increased the activity greatly. The relationships between the polymerization results and the structures were analyzed with NMR spectral data. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1261–1269, 2005     

Oxorhenium(V) Complexes with 1,3,4‐Triphenyl‐1,2,4‐triazol‐5‐ylidene

Reactions of the oxorhenium(V) complexes [ReOX₃(PPh₃)₂] (X = Cl, Br) with the N‐heterocyclic carbene (NHC) 1,3,4‐triphenyl‐1,2,4‐triazol‐5‐ylidene (L^Ph) under mild conditions and in the presence of MeOH or water give [ReOX₂(Y)(PPh₃)(L^Ph)] complexes (X = Cl, Br; Y = OMe, OH). Attempted reactions of the carbene precursor 5‐methoxy‐1,3,4‐triphenyl‐4,5‐dihydro‐1H‐1,2,4‐triazole ( 1 ) with [ReOCl₃(PPh₃)₂] or [NBu₄][ReOCl₄] in boiling xylene resulted in protonation of the intermediately formed carbene and decomposition products such as [HL^Ph][ReOCl₄(OPPh₃)], [HL^Ph][ReOCl₄(OH₂)] or [HL^Ph][ReO₄] were isolated. The neutral [ReOX₂(Y)(PPh₃)(HL^Ph)] complexes are purple, airstable solids. The bulky NHC ligands coordinate monodentate and in cis‐position to PPh₃. The relatively long Re–C bond lengths of approximate 2.1Å indicate metal‐carbon single bonds.