Bulk polymerization of p‐dioxanone using a cyclic tin alkoxide as initiator

Poly(p‐dioxanone) with an inherent viscosity of over 1 dL/g has been synthesized using the cyclic tin alkoxide 1‐di‐n‐butyl‐1‐stanna‐2,5‐dioxacyclopentane as initiator. Poly(p‐dioxanone) was synthesized in bulk and the results have been compared with polymerizations using tin (II) 2‐ethylhexanoate (Sn(Oct)₂) as catalyst. Sn(Oct)₂ has often been reported to be an effective catalyst for the synthesis of poly(p‐dioxanone), but here it is compared with an initiator which is less prone to catalyze transesterification reactions. The results demonstrate that the cyclic tin initiator is a promising alternative for the synthesis of poly(p‐dioxanone) with a high inherent viscosity. Poly(p‐dioxanone) is a polymer with mechanical properties and a degradation rate suitable for tissue engineering applications. Both the cyclic tin initiator and Sn(Oct)₂ gave, under some reaction conditions, inherent viscosities around 1 dL/g. The best polymer synthesized using the cyclic tin initiator had a strain‐at‐break of 515% and a stress‐at‐break of 43 MPa. The inherent viscosity of this polymer was 1.16 dL/g, while Sn(Oct)₂ resulted in a polymer with an inherent viscosity less than 0.4 dL/g under the same reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5552–5558, 2007     

Synthesis of dendritic–linear block copolymers by living ring-opening polymerization of lactones and lactides using dendritic initiators

Polyether dendrons have been successfully used as macroinitiators for the living ring-opening polymerization (ROP) of lactones and lactides. A hydroxyl group located at the focal point of dendrimers of different generations was transformed into diethyl aluminum alkoxides by reaction with triethyl aluminum. The dendritic aluminum alkoxides proved to be efficient macroinitiators for the living ROP of ε-caprolactone (εCL), 1,4,8-trioxa(4,6)spiro[9]undecanone (TOSUO), D ,L - and L ,L -lactide. Formation of these block copolymers of unusual macromolecular architecture was supported by size exclusion chromatography and spectroscopy. The versatility of this synthetic approach allowed ω-functional dendrimer block-polyesters, such as macromonomer, and macromolecules with novel architectures, to be prepared. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1923–1930, 1999     

Synthesis of homopolymers and block copolymers of methacrylates using a mixed Al/Li alkyl initiator

We report the use of a triisobutylaluminium/tert-butyllithium initiator in the preparation of living methacrylate homopoloymers and a wide range of methacrylic block copolymers. The system, which we have referred to as Screened Anionic Polymerisation (SAP), is very tolerant of impurities and is effective in hydrocarbon solution with reaction rates such that high molecular weight polymers can be produced at temperatures readily accessible for large scale industrial use. A mechanism for the reaction is proposed based on preliminary spectroscopic evidence.     

Synthesis and characterization of cerium and yttrium alkoxide complexes supported by ferrocene-based chelating ligands

Two series of Schiff base metal complexes were investigated, where each series was supported by an ancillary ligand incorporating a ferrocene backbone and different N=X functionalities. One ligand is based on an imine, while the other is based on an iminophosphorane group. Cerium(IV), cerium(III), and yttrium(III) alkoxide complexes supported by the two ligands were synthesized. All metal complexes were characterized by cyclic voltammetry. Additionally, NMR, Mo?ssbauer, X-ray absorption near-edge structure (XANES), and absorption spectroscopies were used. The experimental data indicate that iron remains in the +2 oxidation state and that cerium(IV) does not engage in a redox behavior with the ancillary ligand.     

Synthesis and characterization of biodegradable aliphatic polyesters using dibutylmagnesium as initiator

Aliphatic polyesters were synthesized via the ring opening polymerization of the corresponding lactones initiated with dibutylmagnesium both in bulk and in solution. The resulting polymers were characterized by 1H, 13C NMR, GPC and XRD. The results indicated that dibutylmagnesium is an effective initiator for the ring opening polymerization of lactones.     

Synthesis and characterization of ferrocene containing block copolymers

Narrowly dispersed diblock copolymers containing poly(methyl methacrylate) [PMMA] or poly(nonafluorohexyl methacrylate) [PF9MA] as the first block and poly(ferrocenylmethyl methacrylate) [PFMMA] as the second block, were prepared by anionic polymerization for the first time. Disordered bulk morphologies in the case of PMMA‐b‐PFMMA were observed and explained in terms of low Flory–Huggins interaction parameter (χ ≤ 0.04). In the case of PF9MA‐b‐PFMMA hexagonally packed cylinder morphology (HEX) was substantiated from TEM and SAXS observations. Furthermore, high incompatibility between PF9MA and PFMMA blocks allowed for the formation of well‐ordered ferrocene containing cylinders on silica substrate upon exposure of the thin films to a saturated solvent vapor. It was shown that the cylinder orientation, parallel or perpendicular to the surface, could easily be controlled by appropriate choice of the solvent and without the need for preliminary surface modification, for example by means of grafted brush layer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 495–503     

Synthesis of linear block copolymers from methacrylic monomers using 4,6-di-tert-butyl-N-2,6-diisopropylphenyl)-o-iminobenzoquinone

Polymers based on methacrylic monomers were synthesized using 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone. They can be used for the directed synthesis of linear block copolymers with various compositions in the wide range of molecular weights under conditions of the polymerization according to the mechanism of reversible inhibition. It has been demonstrated that a structure of monomer plays the key role in the synthesis of block copolymers with relatively low values of the polydispersity coefficient. The optimal conditions for the synthesis of linear block copolymers based on methacrylic structures monomers have been revealed.

     

Synthesis of A2B star block copolymers from a heterotrifunctional initiator

We described the obtention of A₂B star block copolymers through the use of a new heterotrifunctional initiator. That way, well‐defined (PCL)₂‐arm‐PtBuMA and (PCL)₂‐arm‐PS star block copolymers have been synthesized from a heterotrifunctional initiator bearing two hydroxyl groups able to initiate ROP of CL (with AlEt₃ or Sn(Oct)₂ as coinitiator) and a bromide function able to initiate ATRP of tBuMA or styrene. Firstly, we have proceeded using a sequential process (two‐steps), leading to an intermediate macroinitiator. Secondly, attempt to polymerize these two monomers in a simultaneous process (one‐step), that is directly from the mixture of monomers, initiator, coinitiators, and solvent, has been realized and has shown that some interferences between the two polymerizations occurred, leading to an inhibition of ATRP when Sn(Oct)₂ was used and an unexpected increase in control when AlEt₃ was used as catalyst for the ROP (obtention of well‐defined (PCL)₂‐arm‐PtBuMA with pdi of 1.18). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1796–1806, 2006     

Air-stable titanium alkoxide based metal-organic framework as an initiator for ring-opening polymerization of cyclic esters

An air-stable titanium-organic framework, prepared from Ti(OiPr)4 and 1,4-butanediol, has been characterized via single-crystal X-ray diffraction, revealing a unique supramolecular structure. Its functionality as a highly active initiator for the ring-opening polymerization of cyclic esters is demonstrated. A discrete titanium trimer containing the related ligand (2R,3R)-2,3-butanediol has also been prepared, and it shows analogous activity as a polymerization initiator.     

Synthesis and characterization of semifluorinated polymers and block copolymers

The goal of the investigation presented here was to evaluate the influence of semifluorinated side chains on the bulk structure and the surface properties of polysulfones with different chain structure. Thus, segmented block copolymers consisting of polysulfone and semifluorinated aromatic polyester segments as well as polysulfones having semifluorinated side chains randomly distributed over the polymer backbone were synthesized and characterized. Oxydecylperfluorodecyl side chains were used because of their strong tendency for self-organization. The influence of the chain architecture on the self-organization as well as on the surface properties, particularly the wetting behavior, was examined. It could be shown that despite of the higher self-organizing tendency of block copolymers the surface properties of both polymer types are comparable and depend only on the concentration of side chains.     

Synthesis of block and graft copolymers of tetrahydrofuran and cyclic acetals

The polymerization of tetrahydrofuran under a living form allows quantitative functionalisation as well as the formation of copolymers. Cyclic acetal polymerization is more complex but through the “Activated-Monomer Mechanism” approach, it is possible to prepare telechelic polymers as well as block and graft copolymers with particular emphasis concerning amphiphilic ones.     

Copolymerization and copolymers of brominated phenylmaleimides with some vinyl monomers

The kinetics of the free radical copolymerization in solution of N-(4-bromophenyl)maleimide (MBPMI), N-(2, 4-dibromophenyl)maleimide (DBPMI) and N-(2, 4, 6-tribromophenyl)maleimide (TBPMI) with styrene (St), methyl acrylate (MA), methyl methacrylate (MMA) and acrylonitrile (AN) at low and high conversions were described. Some characteristic properties of the copolymers obtained, particularly their thermal behaviour were also presented.     

Synthesis and characterization of block copolymers having liquid crystalline behaviour

A series of four block copolymers based on aromatic acetoxy-polysulphone (Ac-PSF), terephthalic acid (TPA), m-phthalic acid (MPA), acetoxy-benzoic acid (Ac-HBA), and a di(acetoxy)bisphenol monomer were synthesized. Their structures were determined by IR, thermal mechanical analyses and solubility tests. They all exhibit liquid crystalline behaviour.     

Synthesis and characterization of polymethylphenylsilane–polystyrene block copolymers

Block copolymers of polymethylphenylsilane (PMPS) and polystyrene (PS) have been successfully prepared by the condensation of α,ω-dichloro-polymethylphenylsilane with polystyryl-lithium. These new materials have been characterized by UV spectroscopy, ²⁹Si-NMR, and size exclusion chromatography. These block copolymers show a good emulsifying activity to compatibilize blends of the two homopolymers (PMPS and PS). © 1993 John Wiley & Sons, Inc.     

Macromolecular N-nitroso-acylamines as initiators for polyreactions. I. Synthesis of block copolymers from polycondensates and olefinic monomers,

The synthesis of block copolymers in three-step reactions from linear polycondensates (e.g., nylon 6. nylon 6,6, nylon 6,10 and polyurethane) and olefinic monomers (e.g., styrene, acrylic acid and acrylonitrile, methyl methacrylate, vinyl acetate, vinyl chloride, and isoprene) is reported. Macromolecular radicals are formed by the thermal decomposition of partly nitrosated peptide group containing polycondensates at elevated temperatures (60–200°C). These polyradicals initiate the copolymerization of the olefinic monomers. The conversion and reaction rates were generally high (up to 100% within a few hours). Most of the block copolymers prepared were soluble in organic solvents. Some, however, were insoluble or rubberlike. The reaction mechanism involved are analyzed. Applications are discussed.     

Synthesis and characterization of amphiphilic block copolymers with allyl side‐groups

The synthesis of a new cyclic carbonate monomer containing an allyl group was reported and its biodegradable amphiphilic block copolymer, poly(ethylene glycol)‐block‐poly(L ‐lactide‐co‐5‐methyl‐5‐allyloxycarbonyl‐propylene carbonate) [PEG‐b‐P(LA‐co‐MAC)] was synthesized by ring‐opening polymerization (ROP) of L ‐lactide (LA) and 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC) in the presence of poly (ethylene glycol) as a macroinitiator, with diethyl zinc as a catalyst. ¹³C NMR and ¹H NMR were used for microstructure identification of the copolymers. The copolymer could form micelles in aqueous solution. The core of the micelles is built of the hydrophobic P(LA‐co‐MAC) chains, whereas the shell is set up by the hydrophilic PEG blocks. The micelles exhibited a homogeneous spherical morphology and unimodal size distribution. By using the cyclic carbonate monomer containing allyl side‐groups, crosslinking of the PEG‐b‐P(LA‐co‐MAC) inner core was possible. The adhesion and spreading of ECV‐304 cells on the copolymer were better than that on PLA films. Therefore, this biodegradable amphiphilic block copolymer is expected to be used as a biomaterial for drug delivery and tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5518–5528, 2007     

Synthesis,characterization, and properties of block and bigraft copolymers

The syntheses of poly(styrene-b-isobutylene), poly[(ethylene-co-propylene-co-1,4-hexadiene)-g-styrene-g-α-methylstyrene], and poly[(ethylene-co-propylene-co-1,4-hexadiene)-g-styrene-g-isobutylene] have been accomplished by using the principle of selective sequential initiation. This method makes use of the large differences in initiation rates that exist between labile organic chlorides and bromides when these halides interact with alkylaluminum compounds. Synthesis conditions have been worked out which allow composition control. These new AB blocks and bigrafts exhibit unusual mechanical and solubility properties, some of which will be described. For example, the Nordel-g-PSt-g-PIB bigraft exhibits only one low temperature transition (DSC, Rheovibron), suggesting an intimate aggregation of Nordel and polyisobutylene phases.