A calorimetric comparative study of hydrogenated and deuterated diacetylene 2,4 hexadiynylene bis(p-toluenesulfonate): Phase diagrams and polymerization

Microcalorimetry was used to study the thermal polymerization and the structural instabilities in hydrogenated (pTS-H) and deuterated (pTS-D) diacetylene 2,4-hexadiynylene bis(p-toluenesulfonate). In the induction period, the polymerization reaction proceeds about seven times faster in pTS-D than in pTS-H. Whereas the phase transitions of pure pTS-H and pTS-D monomer crystals and of pure pTS-H and pTS-D polymer crystals are very similar, the situation is completely different for mixed monomer-polymer crystals of pTS-H and pTS-D. The results are interpreted by studying comparative influence of the chain lengths for pTS-H and pTS-D oligomers. A comparison is made between these results and previous experimental results obtained from dielectric measurements, UV-spectroscopy, X-ray, and elastic neutron scattering. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 789–798, 1997     

Spontaneous Single‐Crystal‐to‐Single‐Crystal Evolution of Two Cross‐Laminated Polymers

Two cases of spontaneous evolution of monomers to linear polymers having novel cross‐laminated topology are reported. We synthesized two peptide monomers N₃‐Gly‐Gly‐NH‐CH₂‐CCH and N₃‐Gly‐Gly‐Gly‐CH₂‐CCH and solved their crystal structures by single‐crystal X‐ray diffraction. They adopt H‐bonded crisscrossed layered packing in their crystals such that: (a) the monomers are aligned head‐to‐tail in 1D‐chain‐like arrays and parallel arrangement of such arrays forms a layer; (b) the proximally placed azide and alkyne motifs are in an orientation apt for their regiospecific cycloaddition; (c) each monomer having x peptide bonds is H‐bonded with 2x monomers disposed in intersecting arrangement, which pre‐organize 1D‐chain‐like arrays in adjacent layers in perpendicular orientation. These crystals underwent spontaneous single‐crystal‐to‐single‐crystal (SCSC) polymerization via azide–alkyne cycloaddition reaction to form triazolyl‐polyglycines, at room temperature. The crisscrossed arrangement of monomers in adjacent layers ensured the formation of cross‐laminated polymers.     

Morphology of poly(p‐oxybenzoyl) crystal prepared by direct polycondensation of p‐hydroxybenzoic acid with p‐toluenesulfonyl chloride in pyridine

Poly(p‐oxybenzoyl) (POB) crystals were prepared with the reaction‐induced crystallization of oligomers during the direct polycondensation of p‐hydroxybenzoic acid (HBA) with p‐toluenesulfonyl chloride (TsCl) and N,N‐dimethylformamide in pyridine. Sheaflike lozenge‐shaped POB crystals were obtained, of which the longer diagonal was 7.0–8.0 μm. The influence of the polymerization condition on the morphology was examined to optimize the preparative condition for the crystals exhibiting the clearest habit, and the favorable condition was determined as the molar ratio of TsCl to HBA of 1.3 and polymerization concentration of 3.0%. The crystals possessed extremely high crystallinity and outstanding thermal stability. The formation mechanism of the crystal was proposed as follows. When the number‐average degree of polymerization of the oligomers exceeded a critical value of about 4, they were precipitated to form the hexagonal lamellae. The crystals were grown very quickly to lozenge‐shaped crystal through screw dislocation with the continuous precipitation of oligomers from the solution. Finally, the further polymerization occurred in the precipitated crystal with developing polymer‐chain packing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3275–3282, 2003     

Crystal polymorphs of 6‐[(phenylcarbamoyl)oxy]hexa‐2,4‐diyn‐1‐yl isonicotinate

The title compound, C₁₉H₁₄N₂O₄, was found to have two crystal polymorphs, in which the molecular structures of the diacetylenic compound are broadly similar. The main structural difference between the polymorphs concerns the intermolecular hydrogen‐bonding motifs adopted, namely a one‐dimensional zigzag polymer linked by N—H…N(py) (py is pyridine) interactions in polymorph I and a centrosymmetric dimeric motif formed by N—H…O=C interactions in polymorph II. The diacetylene cores of the molecules stack along the a and b axes in polymorphs I and II, respectively. It was found that only the molecular arrangement in polymorph II satisfies Baughman's criterion to afford polydiacetylenes (PDAs) by thermal annealing or irradiation with light. This predicted polymerization activity was confirmed by experiment.     

Controlled melting of individual,nano‐meter‐sized,polymer crystals confined in a block copolymer mesostructure

We demonstrate a possibility to create custom‐made surface patterns on multiple length scales by melting selected nano‐meter‐sized polymer crystals confined in a highly ordered, spherical mesostructure of a hydrogenated poly(butadiene‐block‐ethylene oxide) (PB_h‐b‐PEO) block copolymer. With heatable probes of an atomic force microscope as a heat source, we succeeded to provide highly locally the thermal energy necessary to individually melt such crystals. Besides this possibility for modification of surface properties, we performed detailed in situ studies of thermally induced reorganization processes and subsequent melting of polymer crystals in confined volumes of a block copolymer mesostructure. Close to the melting point, the stability of the confined crystals could be improved by annealing. In addition, the crystal size increased at the expense of already‐molten crystals, indicating diffusion of PEO blocks across the highly incompatible PB_h matrix. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1312–1320, 2004     

Crystal‐to‐Crystal Synthesis of Helically Ordered Polymers of Trehalose by Topochemical Polymerization

The synthesis of crystalline helical polymers of trehalose via topochemical azide–alkyne cycloaddition (TAAC) of a trehalose‐based monomer is presented. An unsymmetrical trehalose derivative having azide and alkyne crystallizes in two different forms having almost similar packing. Upon heating, both the crystals undergo TAAC reaction to form crystalline polymers. Powder X‐ray diffraction (PXRD) studies revealed that the monomers in both the crystals polymerize in a crystal‐to‐crystal fashion; circular dichroism (CD) studies of the product crystals revealed that the formed polymer is helically ordered. This solvent‐free, catalyst‐free polymerization method that eliminates the tedious purification of the polymeric product exemplifies the advantage of topochemical polymerization reaction over traditional solution‐phase polymerization.     

Solid‐state polymerization of 2,3,6,7,10,11‐hexa(methacrylate) triphenylene

A new monomer, 2,3,6,7,10,11‐hexa(methacrylate) triphenylene (HMTP), and its crystals have been successfully synthesized, and the solid‐state polymerization under UV irradiation has been investigated. The photo polymerization of HMTP in solid was confirmed by the reduction of vinyl bonds in the FT‐IR and UV spectra of PHMTP in comparison with the corresponding spectra of its precursor. Thus, IR spectroscope was used to follow the polymerization of HMTP crystals under UV irradiation, and kinetic studies show a first‐order reaction with rate constant of 6.12 × 10^?3 min^?1. This value is slightly larger than that measured by the weight method. The polarizing optical microscope and X‐ray diffraction were used to study the crystal structure difference between the polymers and its monomer. The results show that the polymers' crystals obtained from photo polymerization kept the monomer crystal lattice. Because of strong overlap between the π‐electron of the triphenylene, the monomer and polymer crystals showed different fluorescence properties. All these results proved that the photo polymerization of HMTP crystals is governed by the packing structure of monomer molecules; in other words, this reaction is just lattice controlled polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1526–1534, 2005     

Topochemical Polymerization of 1,3‐Diene Monomers and Features of Polymer Crystals as Organic Intercalation Materials

From the viewpoint of controlled polymer synthesis, topochemical polymerization based on crystal engineering is very useful for controlling not only the primary chain structures but also the higher‐order structures of the crystalline polymers. We found a new type of topochemical polymerization of muconic and sorbic acid derivatives to give stereoregular and high‐molecular weight polymers under photo‐, X‐ray, and γ‐ray irradiation of the monomer crystals. In this article, we describe detailed features and the mechanism of the topochemical polymerization of diethyl‐(Z,Z)‐muconate as well as of various alkylammonium derivatives of muconic and sorbic acids, which are 1,3‐diene mono‐ and dicarboxylic acid derivatives, to control the stereochemical structures of the polymers. The polymerization reactivity of these monomers in the crystalline state and the stereochemical structure of the polymers produced are discussed based on the concept of crystal engineering, which is a useful method to design and control the reactivity, structure, and properties of organic solids. The reactivity of the topochemical polymerization is determined by the monomer crystal structure, i.e. the monomer molecular arrangement in the crystals. Polymer crystals derived from topochemical polymerization have a high potential as new organic crystalline materials for various applications. Organic intercalation using the polymer crystals prepared from alkylammonium muconates and sorbates is also described.     

One‐pot synthesis of surface‐functionalized molecularly imprinted polymer microspheres by iniferter‐induced “living” radical precipitation polymerization

This article describes for the first time the development of a new polymerization technique by introducing iniferter‐induced “living” radical polymerization mechanism into precipitation polymerization and its application in the molecular imprinting field. The resulting iniferter‐induced “living” radical precipitation polymerization (ILRPP) has proven to be an effective approach for generating not only narrow disperse poly(ethylene glycol dimethacrylate) microspheres but also molecularly imprinted polymer (MIP) microspheres with obvious molecular imprinting effects towards the template (a herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D)), rather fast template rebinding kinetics, and appreciable selectivity over structurally related compounds. The binding association constant K_a and apparent maximum number N_max for the high‐affinity sites of the 2,4‐D imprinted polymer were determined by Scatchard analysis and found to be 1.18 × 10⁴ M^?1 and 4.37 μmol/g, respectively. In addition, the general applicability of ILRPP in molecular imprinting was also confirmed by the successful preparation of MIP microspheres with another template (2‐chloromandelic acid). In particular, the living nature of ILRPP makes it highly useful for the facile one‐pot synthesis of functional polymer/MIP microspheres with surface‐bound iniferter groups, which allows their direct controlled surface modification via surface‐initiated iniferter polymerization and is thus of great potential in preparing advanced polymer/MIP materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3217–3228, 2010     

Synthesis and Reversible Hydration of a Pseudoprotein,a Fully Organic Polymeric Desiccant by Multiple Single‐Crystal‐to‐Single‐Crystal Transformations

A diphenylalanine derivative, N3‐Phe‐Phe‐NHCH2CCH, was designed for topochemical azide–alkyne cycloaddition (TAAC) polymerization. This dipeptide adopted β‐sheet arrangement as designed, in its crystals, but the azide and alkyne were not fitly aligned for their topochemical reaction. However, the voids present around these groups allowed them to attain a reactive geometry upon heating and their consequent TAAC polymerization to a pseudoprotein in a single‐crystal‐to‐single‐crystal (SCSC) fashion. This motion led to the creation of channels in the product crystal and it absorbed water from the surroundings to fill these channels as H‐bonded water wire. The pseudoprotein undergo reversible hydration/dehydration in SCSC fashion many times under mild conditions: hydration at low relative humidity and dehydration at low temperature. Vapor sorption analyses suggest that this fully organic polymer might be useful as an energy‐efficient desiccant material for controlling indoor humidity.     

Synthesis and Reversible Hydration of a Pseudoprotein,a Fully Organic Polymeric Desiccant by Multiple Single‐Crystal‐to‐Single‐Crystal Transformations

A diphenylalanine derivative, N3‐Phe‐Phe‐NHCH2CCH, was designed for topochemical azide–alkyne cycloaddition (TAAC) polymerization. This dipeptide adopted β‐sheet arrangement as designed, in its crystals, but the azide and alkyne were not fitly aligned for their topochemical reaction. However, the voids present around these groups allowed them to attain a reactive geometry upon heating and their consequent TAAC polymerization to a pseudoprotein in a single‐crystal‐to‐single‐crystal (SCSC) fashion. This motion led to the creation of channels in the product crystal and it absorbed water from the surroundings to fill these channels as H‐bonded water wire. The pseudoprotein undergo reversible hydration/dehydration in SCSC fashion many times under mild conditions: hydration at low relative humidity and dehydration at low temperature. Vapor sorption analyses suggest that this fully organic polymer might be useful as an energy‐efficient desiccant material for controlling indoor humidity.     

Triptycene‐containing polyetherolefins via acyclic diene metathesis polymerization

Several new triptycene‐containing polyetherolefins were synthesized via acyclic diene metathesis (ADMET) polymerization. The well‐established mechanism, high selectivity and specificity, mild reaction conditions, and well‐defined end‐groups make the ADMET polymerization a good choice for studying systematic variations in polymer structure. Two types of triptycene‐based monomer with varying connectivities were used in the synthesis of homopolymers, block copolymers, and random copolymers. In this way, the influence of the triptycene architecture and concentration in the polymer backbone on the thermal behavior of the polymers was studied. Inclusion of increasing amounts of triptycene were found to increase the glass transition temperature, from ?44 °C in polyoctenamer to 59 °C in one of the hydrogenated triptycene homopolymers ( H‐PT2 ). Varying the amounts and orientations of triptycene was found to increase the stiffness ( H‐PT1 ), toughness ( PT1₁‐b‐PO₁ ) and ductility ( PT1₁‐ran‐PO₃ ) of the polymer at room temperature. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Efficient Cu(I) acetate‐catalyzed cycloaddition of multifunctional alkynes and azides: From solution to bulk polymerization

“Click” chemistry is an effective and commonly used technique in polymer chemistry for the synthesis and modification of polymers. In this study, the bulk polymerization of multifunctional alkynes and azides was achieved by the copper(I)‐catalyzed alkyne–azide 1,3‐dipolar cycloaddition. The influence of different catalyst systems on the polymerization kinetics of the “click”reaction were evaluated by differential scanning calorimetry. Surprisingly, Cu(I) acetate showed the most efficient catalytic behavior among the applied Cu(I) salts. The polymerization kinetics in solution were investigated by 1H NMR spectroscopy and size exclusion chromatography. According to the 1H NMR investigation the copper(I)‐catalyzed cycloaddition follows a second‐order kinetics with external catalysis. Additionally, the mechanical properties of the resulting polymers were investigated by depth sensing indentation. Thereby the polymerizations of the alkyne tripropargylamine with the azides 1,3‐bis(azidomethyl)benzene and 1,4‐bis(azidomethyl)benzene resulted in mechanical hard materials. Furthermore, the combination of the alkynes tripropargylamine and di(prop‐2‐yn‐1‐yl) isophorone dicarbamate and polymerization with 1,2‐bis(2‐azidoethoxy)ethane resulted in high indentation moduli. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 239–247     

Synthesis and Thermoreversible Gelation Properties of Main‐Chain Poly(pyridine‐2,6‐dicarboxamide‐triazole)s

A series of main‐chain poly(amide‐triazole)s were prepared by copper(I)‐catalyzed alkyne–azide AABB‐type copolymerizatons between five structurally similar diacetylenes 1 – 5 with the same diazide 6 . The acetylene units in monomers 1 – 5 possessed different degrees of conformational flexibility due to the different number of intramolecular hydrogen bonds built inside the monomer architecture. Our study showed that the conformational freedom of the monomer had a profound effect on the polymerization efficiency and the thermoreversible gelation properties of the resulting copolymers. Among all five diacetylene monomers, only the one, that is, 1 ‐Py(NH)₂ which possesses the pyridine‐2,6‐dicarboxamide unit with two built‐in intramolecular H bonds could produce the corresponding poly(amide‐triazole) Poly‐(PyNH)₂ with a significantly higher degree of polymerization (DP) than other monomers with a lesser number of intramolecular H bonds. In addition, it was found that only this polymer exhibited excellent thermoreversible gelation ability in aromatic solvents. A self‐assembling model of the organogelating polymer Poly‐(PyNH)₂ was proposed based on FTIR spectroscopy, XRD, and SEM analyses, in which H bonding, π–π aromatic stacking, hydrophobic interactions, and the structural rigidity of the polymer backbone were identified as the main driving forces for the polymer self‐assembly process.     

Ring‐opening polymerization of 1,4‐dioxan‐2‐one initiated by lanthanum isopropoxide in bulk

Lanthanum isopropoxide (La(OiPr)₃) has been synthesized and employed for ring‐opening polymerization of 1,4‐dioxan‐2‐one in bulk as a single‐component initiator. The influences of reaction conditions such as initiator concentration, reaction time, and reaction temperature on the polymerization were investigated. The kinetics indicated that the polymerization is first‐order with respect to the monomer concentration. The Mechanistic investigations according to ¹H NMR spectrum analysis demonstrated that the polymerization of PDO proceeded through a coordination‐insertion mechanism with a rupture of the acyl‐oxygen bond of the monomer rather than the alkyl‐oxygen bond cleavage. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5214–5222, 2008     

Selectively C‐Deuterated Indigotins

Selectively C‐deuterated indigotins were synthesized from halogenated indigotins 1a – c as precursors. The described reactions – used already by the ancient purple dyers – allowed the introduction of D‐atoms at defined positions of the indigo molecule. The exchange of halogen atoms by D‐atoms was induced by UV irradiation of the leuco compounds 2a – c and 3a – c in D₂O. The resulting leuco forms 4a – c were oxidized to the deuterated indigotins 5a – c . Some conclusions were drawn as to the kinetics of the reaction. The physical properties of the new compounds were determined.     

R‐RAFT approach for the polymerization of N‐isopropylacrylamide with a star poly(ε‐caprolactone) core

Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a more robust and versatile approach than other living free radical polymerization methods, providing a reactive thiocarbonylthio end group. A series of well‐defined star diblock [poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)]₄ (SPCLNIP) copolymers were synthesized by R‐RAFT polymerization of N‐isopropylacrylamide (NIPAAm) using [PCL‐DDAT]₄ (SPCL‐DDAT) as a star macro‐RAFT agent (DDAT: S‐1‐dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate). The R‐RAFT polymerization showed a controlled/“living” character, proceeding with pseudo‐first‐order kinetics. All these star polymers with different molecular weights exhibited narrow molecular weight distributions of less than 1.2. The effect of polymerization temperature and molecular weight of the star macro‐RAFT agent on the polymerization kinetics of NIPAAm monomers was also addressed. Hardly any radical–radical coupling by‐products were detected, while linear side products were kept to a minimum by careful control over polymerization conditions. The trithiocarbonate groups were transferred to polymer chain ends by R‐RAFT polymerization, providing potential possibility of further modification by thiocarbonylthio chemistry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Kinetic study of H‐atom transfer in imidazoline‐, imidazolidine‐, and pyrrolidine‐based alkoxyamines: Consequences for nitroxide‐mediated polymerization

The H‐atom transfer reaction was studied for a series of imidazoline, imidazolidine, and pyrrolidine‐based alkoxyamines containing either isobutyrate‐2‐yl or 1‐phenylethyl alkyl fragments. The C O bond homolysis rate constants and activation energies were determined by ¹H NMR product analysis as a function of temperature. Inter‐ and intramolecular H‐atom transfer reactions were distinguished by examination of alkoxyamine thermolysis products in the absence and in the presence of a radical scavenger (thiophenol or deuterated styrene). A correlation between the structure of the nitroxyl fragment of alkoxyamine and the H‐transfer reaction was found. The high steric demands of the substituents on the nitroxyl part of the isobutyrate‐2‐yl alkoxyamine decrease both types of reaction. For alkoxyamines containing the 1‐phenylethoxyamines, neither inter‐ nor intramolecular H‐atom transfer was observed. Controlled polymerization of methylmethacrylate initiated with imidazoline‐based alkoxyamine was observed, although the polymer obtained was not living. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6579–6595, 2009     

Designed Synthesis of a 1D Polymer in Twist‐Stacked Topology via Single‐Crystal‐to‐Single‐Crystal Polymerization

To synthesize a fully organic 1D polymer in a novel twist‐stacked topology, we designed a peptide monomer HC≡CCH₂‐NH‐Ile‐Leu‐N₃, which crystallizes with its molecules H‐bonded along a six‐fold screw axis. These H‐bonded columns pack parallelly such that molecules arrange head‐to‐tail, forming linear non‐covalent chains in planes perpendicular to the screw axis. The chains arrange parallelly to form molecular layers which twist‐stack along the screw axis. Crystals of this monomer, on heating, undergo single‐crystal‐to‐single‐crystal (SCSC) topochemical azide–alkyne cycloaddition (TAAC) polymerization to yield an exclusively 1,4‐triazole‐linked polymer in a twist‐stacked layered topology. This topologically defined polymer shows better mechanical strength and thermal stability than its unordered form, as evidenced by nanoindentation studies and thermogravimetric analysis, respectively. This work illustrates the scope of topochemical polymerizations for synthesizing polymers in pre‐decided topologies.     

Isotope Effects on the Crystallization Kinetics of Selectively Deuterated Poly(ε‐Caprolactone)

Deuterium labeling of semi‐crystalline polymers can dramatically affect their crystallization behaviors. However, the influence of different labeled positions in a partially deuterated polymer on its crystallization is still far from understood. Here, we synthesized a series of selectively deuterated poly(ε‐caprolactones) (PCLs) through ring‐opening polymerization of ε‐caprolactone with controlled deuteration sites, including fully protiated (D0), fully deuterated (D10), tetra deuteration at the 3‐ and 7‐ caprolactone ring positions (D4) and hexa deuteration at the 4‐, 5‐, and 6‐ caprolactone ring positions (D6). All the PCLs showed a similar lamellar structure and parameters. Differential scanning calorimetry (DSC) analysis revealed that the equilibrium melting temperature $T_m^0$, melting temperature T_m , crystallization temperature T_c , and crystallization kinetics changed systemically with the deuterium content except for D4, which indicates that the presence of ? CD₂? moieties on either side of ester group in the polymer chain combined with isotopic inhomogeneity could influence the chain packing. The nonmonotonic trend of T_m as a function of deuterium content could be attributed to the difference in a hydrogen‐bond like intermolecular interaction between different PCLs. Partially deuterated PCLs (D4 and D6) showed an Avrami index near 2. After analyzing the parameters at the same supercooling temperature ΔT_c , the existence of two crystallization regimes of PCLs were detected. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 771–779