Studies on equilibrium structures of complex polymers in condensed systems

The thermodynamic‐equilibrium structures of four copolymers with different chain architectures are compared. They are AB diblock, BAB triblock, and ABC triblock copolymers and AB₂ star‐branched graft copolymers. Their morphological transitions meaningfully differ from one another, reflecting the difference in chain architecture. Two‐component polymers barely form bicontinuous structures; however, symmetric ABC triblock copolymers easily form tricontinuous structures composed of two surfaces parallel to a Gyroid minimal surface. All four ABC equilibrium structures have a superlattice structure. Block polymer chains in microphase‐separated bulk are elongated in the longitudinal direction in lamellar microphases. Although the deformation manner of the chains restricted in microphases depends on the chain architectures, the volumes of the deformed coils are always the same as those of the unperturbed chains regardless of their architectures. The measured polystyrene/poly(2‐vinylpyridine) interfacial thickness is fairly thin, but the observed value is much thicker than the theoretically predicted one. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1645–1655, 2000     

Consequences of Block Sequence on the Orthogonal Folding of Triblock Copolymers

ABA‐ and BAB‐type triblock copolymers possessing pendant, self‐assembling motifs in the A and B blocks were synthesized, with 2‐ureidopyrimidinone (UPy) and benzene‐1,3,5‐tricarboxamide (BTA) for the A and B block, respectively. They were investigated to assess if and how the polymer’s microstructure influences the self‐assembly behavior of the supramolecular motifs and, as a result, the single‐chain folding process. BAB‐type triblock copolymers were synthesized via atom transfer radical polymerization (ATRP) with molecular weights ranging from 30 to 120 kg mol^?1; the BTA and UPy motifs were attached using a post‐functionalization approach. The ABA‐type triblock copolymers were available from previous work. In highly dilute solutions, both types of triblock copolymers fold into single‐chain polymeric nanoparticles (SCPNs) via thermally induced BTA self‐assembly and photo‐triggered UPy dimerization. Chain collapse induced by intramolecular UPy dimerization was evaluated using size‐exclusion chromatography (SEC). The BTA self‐assembly was monitored by circular dichroism (CD) spectroscopy. The microstructures of SCPNs were visualized by atomic force microscopy (AFM). SEC analysis indicated a more loose packing for the BAB‐type folded nanoparticles than for the ABA‐type ones, which implies that topological differences in the polymer architecture do affect the folding behavior, although only slightly. The facile synthetic protocol developed here provides topologically different triblock architectures and opens up the area for single‐chain folding technology that is applicable in artificial enzymatic systems with compartmentalized domains.     

Azobenzene‐Containing Block Copolymers as Light‐Induced Reworkable Adhesives: Effects of Molecular Weight,Composition, and Block Copolymer Architectures on the Adhesive Properties

We previously reported that ABA‐type triblock copolymers with azobenzene‐containing terminal blocks can be utilized as a light‐induced reworkable adhesive that enables repeatable bonding and debonding on demand. The reworkability was based on the photoisomerization of the azobenzene moiety and concomitant softening and hardening of the azo blocks. Our aim in this study is to investigate the effect of the composition, molecular weight, and block copolymer architectures on the reworkable adhesive properties. For this purpose, we prepared AB diblock, ABA triblock, and 4‐arm (AB)₄ star‐block copolymers consisting of polymethacrylates bearing an azobenzene moiety (A block) and 2‐ethylhexyl (B block) side chains and performed adhesion tests by using these block copolymers. As a result, among the ABA block copolymers with varied compositions and molecular weights, the ABA triblock copolymers with an azo block content of about 50 wt % and relatively low molecular weight could achieve an appropriate balance between high adhesion strength and low residual adhesion strength upon UV irradiation. Furthermore, the 4‐arm star‐block structure not only enhances the adhesion strength, but also maintains low residual adhesion strength when exposed to UV irradiation. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 806–813     

Influence of molecular architecture of S–S/B–S triblock copolymers on rheological properties

The influence of middle and outer block composition of symmetric triblock copolymers consisting of a polystyrene–polybutadiene (S/B) random middle block and two polystyrene (PS) outer blocks on morphology and rheological behavior has been investigated. Master curves are obtained by shifting the experimental data measured at different temperatures using time‐temperature superposition principle, the validity of which was confirmed in the linear viscoelastic regime. The rheological properties are observed to be strongly influenced by the relative composition of the S‐SB‐S triblock copolymers. Increasing the S/B ratio from 1:1 to 1:2 in the middle block has lead to a change in morphology from wormlike to lamellar, which is also accompanied with broad and sharp tan δ peaks in the dynamic mechanical measurements, respectively. The storage and loss modulus have been observed to increase with the increase in PS contents in the outer blocks and PB content in the middle block. The triblock copolymer with wormlike structure showed terminal linear viscoelastic behavior, whereas the ones with lamellar morphology showed nonterminal flow behavior in the similar low‐frequency regime. The relaxation modulus (G_t) has been observed to increase four times when the S/B ratio is increased from 1:1 to 1:2, whereas it increases threefold when the PS‐content in the outer block was increased by just 8 wt %. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2776–2788, 2006     

Effects of polydepsipeptide side‐chain groups on the temperature sensitivity of triblock copolymers composed of polydepsipeptides and poly(ethylene glycol)

To develop new types of biodegradable polymers possessing predictable responses to changes in temperature, ABA‐type and BAB‐type triblock copolymers composed of various polydepsipeptides (PDP) and poly(ethylene glycol) (PEG) (PDP‐PEG‐PDP and PEG‐PDP‐PEG) were synthesized. The specific focus of this study was on the effect of the different side‐chain groups of various amino acids on the temperature‐responsive behavior of the triblock copolymers. An ABA‐type triblock copolymer containing the less hydrophobic glycine (PGG‐PEG‐PGG) did not exhibit any temperature‐responsive behavior; however, ABA‐type triblock copolymers containing the hydrophobic α‐amino acids, L ‐leucine and L ‐phenylalanine (PGL‐PEG‐PGL or PGF‐PEG‐PGF), did exhibit temperature‐responsive behavior. The cloud point of PGF‐PEG‐PGF was 10 °C lower than that of PGL‐PEG‐PGL. It can be possible to control temperature‐sensitivity by changing not only PDP segment length but also kind of α‐amino acid in PDP segment. Moreover, BAB‐type triblock copolymer containing L ‐leucine (PEG‐PGL‐PEG) showed temperature‐responsive sol‐gel transition. Because polydepsipeptides are biodegradable polymers, the information obtained in this study is useful to design biodegradable injectable polymers having controllable temperature‐sensitivity for biomedical use.© 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3892–3903, 2009     

Effect of architecture on the tensile properties of triblock copolymers in a lamellar phase.

We have used self-consistent field theory to calculate the tensile moduli of triblock copolymers in lamellar microstructures prepared from linear and star architectures. The extensional moduli K(33) are the main contributors to the tensile moduli, and the contribution of K(U)33 (the internal energy contribution to K(33)) is the main component of the value of K(33). We find that the tensile moduli of ABC three-miktoarm star terpolymers are smaller than those of ABC linear triblock copolymers having identical components, presumably for two main reasons. First, for the ABC three-miktoarm star terpolymers, the contributions of K(U)33 are larger than those of the linear triblock copolymers; we attribute this phenomenon to the star terpolymers having smaller lamellar domain sizes at equilibrium relative to those of the linear triblock copolymers. Second, conformational entropies play an important role in affecting the tensile moduli, mainly because of the different degrees of freedom of the various chains. In contrast, the shear moduli contribute negligibly to the tensile moduli.     

Self-assembly and responsiveness of polypeptide-based block copolymers: How “Smart” behavior and topological complexity yield unique assembly in aqueous media

Polypeptide-based amphiphilic block copolymers are an attractive class of materials given their ability to form well-defined aqueous nanoassemblies that respond to external stimulus through secondary structure transitions. This report will highlight recent literature in the area of polypeptide-based block copolymer self-assembly, with the major focus being on how the responsive nature and structural complexity of the polypeptide blocks can be incorporated into systems with complex topologies such as ABA/BAB/ABC triblock copolymers, AB₂ and A₂B star copolymers, and miktoarm μ-ABC star terpolymers. In particular, the role of interfacial curvature changes and how they result in morphology transitions will be discussed. The ‘smart’ assembly properties of peptides in complex block copolymer topologies can lead to enhanced responsiveness, morphological complexity, and unique morphological transitions with varying solution conditions. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

A Molecular Dynamics Simulation on the Self‐Assembly of ABC Triblock Copolymers, 1. Effects of Block Composition in Symmetric Triblock Copolymers

The self‐assembly of ABC triblock copolymers in the microphase‐separated state is investigated using an isothermal‐isobaric molecular dynamics simulation. For the validation of our simulation scheme, ABA triblock copolymers are also simulated. We examine the effect of the composition (f_B) of symmetric triblock copolymers on the morphology realized in these copolymers, keeping other parameters fixed. For ABA triblock copolymers, the transition from lamellar to cylindrical morphologies is observed with increasing the composition from f_B = 0.5 to f_B = 0.75, and such behavior is supported by calculation results of scattering patterns. These simulated results agree well with experimental and theoretical ones, validating our simulation method. More complex structures are predicted for ABC triblock copolymers. If midblock B is the minor component, its structures are changed from lamellar, cylindrical, to spherical morphology at the interface between A/C lamellae as f_B decreases. For ABC triblock copolymers with the midblock B as the major component, the morphology of end blocks in the matrix composed of the midblock is changed from tricontinuous to spherical structures as f_B increases.     

Thermoresponsive gels based on ABA triblock copolymers: Does the asymmetry matter?

The aim of this study was to investigate the effect of the asymmetry of the triblock copolymers on their thermoresponsive self‐assembly behavior. To this end, nine ABA‐type triblock copolymers with n‐butyl methacrylate and 2‐(dimethylamino)ethyl methacrylate (DMAEMA) consisting of the A and the B blocks, respectively, were synthesized. Polymers of three different DMAEMA contents (50, 60, and 70 wt %) were synthesized while varying the length ratio of the two hydrophobic A blocks. Specifically, one symmetric ABA triblock copolymer and two asymmetric ABA′ triblock copolymers with the length of the second A block to be twice or four times bigger than the length of the first A block (AB2A and AB4A triblock copolymer) were synthesized for each DMAEMA composition. Three statistical copolymers were also synthesized for comparison. The thermoresponsive behavior of the copolymers was studied and it was found that the cloud point and rheological properties of the polymers were strongly affected by the architecture (statistical vs. block) and less strongly by the DMAEMA composition and the asymmetry of the polymers. Nevertheless, interestingly the asymmetry of the ABA triblock copolymers did influence the thermoresponsive behavior with the more symmetric polymers presenting a sol–gel transition at lower temperatures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2850–2859.     

Morphologies and domain sizes of microphase-separated structures of block and graft copolymers of different types

Well-defined block and graft copolymers of different types with different compositions and molecular weights, such as styrene(S)-2-vinylpyridine(P) diblock copolymers, SP star-shaped block copolymers, PSP triblock copolymers, styrene(S)-isoprene(I) multiblock copolymers of the (SI)_n type, ISP triblock copolymers, SPP graft copolymers and their deuterated samples were prepared. Variations of the morphologies with compositions, molecular weight dependences of the lamellar domain sizes and conformations and distributions of block chains in the lamellar domains were studied in the strong segregation limit. Besides typical morphologies such as spherical, cylindrical and lamellar structures, ordered bi- and tri-continuous structures were found between cylindrical and lamellar structures for SP diblock copolymers, PSP and ISP triblock copolymers, respectively. The composition ranges of morphologies are different for the block and graft copolymers of different types. The molecular weight dependences of lamellar domain sizes are about the same, but their magnitudes are not always the same for the block and graft copolymers of different types. These results are well explained by the theories of Helfand-Wasserman and Semenov. Block chains in lamellae are extended along the direction perpendicular to lamellae, but they are contracted along the parallel direction. The former result is well explained by the theories, but the latter is not. Chains adjacent to the junction points between different block chains are localized near the domain interface, but chains at the free-ends of block chains are widely distributed in the domain with the maximum at the center of domain.     

AxBAx‐Type Block–Graft Polymers with Soft Methacrylate Middle Segments and Hard Styrene Outer Grafts: Synthesis,Morphology, and Mechanical Properties

Novel copolymers with controlled architectures can function as new building blocks for well‐defined nanostructures on the basis of microphase separation, unlike conventional ABA triblock copolymers. A series of well‐defined A_xBA_x‐type block–graft copolymers consisting of soft middle segments (dodecyl methacrylate (DMA)) and hard outer graft chains (styrene (St)) were synthesized by ruthenium‐catalyzed living radical block and graft polymerization. NMR spectroscopy and size‐exclusion chromatography combined with multiangle laser light scattering confirmed the well‐defined structure of the A_xBA_x block–graft copolymers with backbones and graft chains of controlled lengths. Transmission electron microscopy and transmission electron microtomography revealed a series of morphologies for the copolymers. Morphological changes were observed from PSt “honeycomb” cylinders to lamellae and poly(DMA) cylinders with increasing PSt‐graft content, whereby the phase diagram was shifted significantly to lower volume fractions of the larger‐number component (St) relative to those of the corresponding ABA triblock copolymers. More specifically, poly(DMA) cylinders were observed even before the St content reached 50 wt %. The A_xBA_x and ABA copolymers with 17–30 wt % of St exhibited characteristics of a thermoplastic elastomer with tensile strengths of 1–6 MPa and elongations at break of 70–300 %. These mechanical properties can be related well to the microphase structures of the A_xBA_x and ABA copolymers.     

Novel Thermoreversible Gelation of Biodegradable PLGA‐block‐PEO‐block‐PLGA Triblock Copolymers in Aqueous Solution

The BAB‐type triblock copolymers composed of a central poly(ethylene oxide) (PEO, M̄_nPEO = 1 000) block and two poly[(D ,L ‐lactic acid)‐co‐(glycolic acid)] end blocks with molecular weights between 900 and 1 600 exhibited an interesting phase transition behavior. The copolymer aqueous solution can form micelles with PLGA loops in the core and a PEO shell and groups of micelles because of bridging between micelles caused by the PLGA blocks with raising temperature. A possible micellar gelation mechanism was suggested.     

Synthesis and characterization of block copolymers containing poly(di(ethylene glycol) 2‐ethylhexyl ether acrylate) by reversible addition–fragmentation chain transfer polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization has emerged as one of the important living radical polymerization techniques. Herein, we report the polymerization of di(ethylene glycol) 2‐ethylhexyl ether acrylate (DEHEA), a commercially‐available monomer consisting of an amphiphilic side chain, via RAFT by using bis(2‐propionic acid) trithiocarbonate as the chain transfer agent (CTA) and AIBN as the radical initiator, at 70 °C. The kinetics of DEHEA polymerization was also evaluated. Synthesis of well‐defined ABA triblock copolymers consisting of poly(tert‐butyl acrylate) (PtBA) or poly(octadecyl acrylate) (PODA) middle blocks were prepared from a PDEHEA macroCTA. By starting from a PtBA macroCTA, a BAB triblock copolymer with PDEHEA as the middle block was also readily prepared. These amphiphilic block copolymers with PDEHEA segments bearing unique amphiphilic side chains could potentially be used as the precursor components for construction of self‐assembled nanostructures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5420–5430, 2007     

Synthesis and dielectric properties of novel liquid crystalline triblock copolymers with cyanobiphenyl moieties and poly(n‐butyl acrylate) segments

In this work, self‐assembly method was used to improve the dielectric constant of triblock copolymers. A series of ABA triblock copolymers with a defined length of poly(n‐butyl acrylate) (PBA, B block) segment and different lengths of liquid crystalline (LC) poly[11‐(4‐cyano‐4′‐biphenoxy)undecyl methacrylate] (P11CBMA, A block) segments were synthesized by using the atom transfer radical polymerization method. The well‐defined triblock copolymers P11CBMA_m‐b‐PBA_n‐b‐P11CBMA_m possess three different B/A ratios (n = 50, m = 17, 43, 53). Due to the supramolecular cooperative motion effect, the copolymers can form worm‐like microstructure (W_LC = 52.8%), cylinder‐like nanostructure with P11CBMA phase embedded in PBA matrix (W_LC = 73.9%), and wide stripe structure with LC domains distributed unevenly in a continuous PBA matrix (W_LC = 77.7%) after annealed at 160°C (above T_i) under N₂ for 24 h, respectively. In order to study the influence of microphase separated morphology of triblock copolymer on the dielectric properties, solvent annealing was also used to develop various nanostructures. After thermal or solvent annealing, the dielectric constants of block copolymers increased dramatically while their loss factors remained the same. For different block copolymers, the dielectric constants increased with the increase of the LC block length. For diverse treatments, dielectric permittivities of samples varied widely with different nanostructures. The results show that the dielectric constants of block copolymers could be tuned by the block ratios and the self‐assembled microstructures. These findings will inspire researchers using self‐assembly method to design and develop novel flexible materials with high dielectric permittivity. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural characterization of amphiphilic polymer conetworks end-linked with the optimal amount of cross-linker

Amphiphilic polymer conetworks were synthesized by the end-linking of ABA triblock copolymers using optimal (minimal) amount of cross-linker in pursuit of nanoscale phase separated materials with a long-range order. Small-angle neutron scattering (SANS) was employed to investigate the structure of the conetworks in D₂O. The measurements revealed single SANS correlation peaks, indicating a short-range, liquid-like order within the conetworks, similar to that observed in counterparts prepared using super-optimal amount of cross-linker. This was attributed to the relatively low molecular weight of the chains and the constraints of end-linking. Thus, a reduced loading of cross-linker did not affect the structure of the conetworks. In contrast, the conetwork structure was significantly affected by the polymer architecture at minimal cross-linker loading, with much less intense SANS correlation peaks exhibited by the BAB triblock and the statistical copolymer end-linked conetworks, and the randomly cross-linked statistical conetwork.     

The influence of solution‐state conditions and stirring rate on the assembly of poly(acrylic acid)‐containing amphiphilic triblock copolymers with multi‐amines

In the effort towards making nanoscale objects and assemblies feasible for use as functional materials, it is imperative to obtain control over the fundamental architectures and essential to understand what experimental conditions cause the manifestation of specific morphologies. A number of factors are known to influence the shape during the self‐assembly of amphiphilic block copolymers in solution, including solvent composition, polymer length, hydrophobicity versus hydrophilicity, as well as the addition of additives that can interact with segments of the block copolymers. This research, focused on developing an understanding of the micellar architectures accessed by the amphiphilic triblock copolymer of acrylic acid, methyl acrylate, and styrene, PAA₈₅‐b‐PMA₄₀‐b‐PS₃₅, as a function of the stirring rate, together with other factors, when undergoing coassembly with ethylenediamine or diethylenetriamine in water/tetrahydrofuran solutions. The work demonstrates that the rate at which the polymer solution was stirred impacts the shape of the solution‐state assemblies formed by the triblock copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Construction of temperature responsive hybrid crosslinked self‐assemblies based on PEG‐b‐P(MMA‐co‐MPMA)‐b‐PNIPAAm triblock copolymer: ATRP synthesis and thermoinduced association behavior

A novel amphiphilic thermosensitive poly(ethylene glycol)₄₅‐b‐poly(methyl methacrylate₄₆‐co‐3‐(trimethoxysilyl)propyl methacrylate)₂‐b‐poly(N‐isopropylacrylamide)₄₂₉ (PEG₄₅‐b‐P(MMA₄₆‐co‐MPMA₂)‐b‐PNIPAAm₄₂₉) triblock copolymer was synthesized via consecutive atom transfer radical polymerization techniques. The thermoinduced association behavior of the resulting triblock copolymers in aqueous medium was further investigated in detail by ¹H NMR, transmission electron microscopy, and dynamic light scattering. The results showed that at the temperature (25 °C) below the LCST, PEG₄₅‐b‐P(MMA₄₆‐co‐MPMA₂)‐b‐PNIPAAm₄₂₉ triblock copolymers self‐assembled into the core crosslinked micelles with the hydrophobic P(MMA‐co‐MPMA) block constructing a dense core, protected by the mixed soluble PEG and PNIPAAm chains acting as a hydrophilic shell simultaneously. With an increase in temperature, the resulting core‐shell micelles converted into a new type of micelles with the hydrophilic PEG chains stretching out from the hydrophobic core through the collapsed PNIPAAm shell. On the other hand, at the temperature (40 °C) above the LCST, such triblock copolymers formed the crosslinked vesicles with the hydrophobic PNIPAAm and P(MMA‐co‐MPMA) blocks constructing a membrane core and the soluble PEG chains building the hydrophilic lumen and the shell. On further decreasing the temperature, the resulting vesicles underwent transformation from the shrunken to the expanded status, leading to the formation of swollen vesicles with enlarged size. This study is believed to present the first formation of two types of hybrid crosslinked self‐assemblies by thermoinduced regulation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of ABA‐triblock and star‐diblock copolymers with poly(2‐adamantyl vinyl ether) and poly(n‐butyl vinyl ether) segments: New thermoplastic elastomers composed solely of poly(vinyl ether) backbones

ABA‐type triblock copolymers and AB‐type star diblock copolymers with poly(2‐adamantyl vinyl ether) [poly(2‐AdVE)] hard outer segments and poly(n‐butyl vinyl ether) [poly(NBVE)] soft inner segments were synthesized by sequential living cationic copolymerization. Although both the two polymer segments were composed solely of poly(vinyl ether) backbones and hydrocarbon side chains, they were segregated into microphase‐separated structure, so that the block copolymers formed thermoplastic elastomers. Both the ABA‐type triblock copolymers and the AB‐type star diblock copolymers exhibited rubber elasticity over wide temperature range. For example, the ABA‐type triblock copolymers showed rubber elasticity from about ?53 °C to about 165 °C and the AB‐type star diblock copolymer did from about ?47 °C to 183 °C with a similar composition of poly(2‐AdVE) and poly(NBVE) segments in the dynamic mechanical analysis. The AB‐type star diblock copolymers exhibited higher tensile strength and elongation at break than the ABA‐type triblock copolymers. The thermal decomposition temperatures of both the block copolymers were as high as 321–331 °C, indicating their high thermal stability. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Dipole moments of (styrene-p-chlorostyrene) triblock copolymers in solutions

(Styrene-p-chlorostyrene) triblock copolymers of the ABA and BAB types (A—polystyrene; B—poly-p-chlorostyrene) were prepared by anionic polymerization and their conformational behaviours in solutions were studied from measurements of the dipole moments. Two solvents, toluene and cumene, were used for the study; toluene is a good solvent for both polystyrene and poly-p-chlorostyrene whereas cumene is a selective solvent, good for polystyrene but poor for poly-p-chlorostyrene. It was found that the dipole moments of the block copolymers measured in toluene are the same for the ABA and BAB copolymers; in cumene however the dipole moment of the BAB copolymer is smaller than that of the ABA copolymer. The results give an additional support to our previous conclusion that the conformation of the block copolymers in a good solvent such as toluene could be approximated with a pseudo-random coil form; in a selective solvent, however, some anomalies take place in the conformation of the block copolymers, as deduced from intrinsic viscosity, osmotic pressure and light scattering measurements.     

ABA‐type liquid crystalline triblock copolymers via nitroxide‐mediated radical polymerization: Design,synthesis, and morphologies

We have designed and synthesized rod–coil–rod triblock copolymers of controlled molecular weight by two‐step nitroxide‐mediated radical polymerization, where the rod part consists of “mesogen‐jacketed liquid crystalline polymer” (MJLCP). The MJLCP segment examined in our studies is poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (MPCS) while the coil part is polyisoprene (PI). Characterization of the triblock copolymers by GPC, ¹H and ¹³C NMR spectroscopies, TGA, DSC confirmed that the triblock copolymers were comprised of microphase‐separated low T_g amorphous PI and high T_g PMPCS blocks. Analysis of POM and 1D, 2D‐WAXD demonstrated that the triblock copolymers formed nematic liquid crystal phase. Morphological studies using TEM indicated the sample formed lamellar structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5949–5956, 2007