Synthesis and polymerization of a new nitrogen‐containing bis‐ortho‐diynylarene monomer

This study focuses on the preparation, characterization, and optical properties of new bis(3,4‐diphenylethynylphenyl)phenylamine. This is the first nitrogen‐containing bis‐ortho‐diynylarene (BODA) monomer having a nitrogen atom as the spacer group. BODA monomers are usually prepared from common bisphenols, thereby providing great synthetic versatility and the opportunity to develop a wide array of novel polyarylene thermosets by varying the aromatic spacer group. The new bis(3,4‐bisphenylethynylphenyl)phenylamine was synthesized in five steps. This compound emits an intense blue color (λ = 438 nm) upon irradiation by UV light and may be suitable for use as an emitting layer in electroluminescent devices. Bis‐(3,4‐bisphenylethynylphenyl)phenylamine and its polymer have photoluminescence quantum yields 34 and 38%, respectively, and long excited‐state lifetimes of 3.2 and 3.6 ns, respectively. The structure of the monomer and its polymer were characterized using spectroscopic techniques including Ultraviolet–visible Spectrophotometer, Photoluminescence Spectrophotometer, Fourier Transform infrared spectroscopy, and Gel Permeation Chromatography. The polymerizations were studied by Differential Scanning Calorimeter. The amount of weight loss and the thermostability of the nitrogen‐containing polymer were determined from thermogravimetric analysis. The electrical conductivity of neat HCl‐doped BODA‐derived polymer film was measured according to the standard four‐point probe technique. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6988–6996, 2006     

Synthesis and radical polymerization of styrene‐based monomer having a five‐membered cyclic carbonate structure

A styrene‐based monomer having a five‐membered cyclic carbonate structure, 4‐vinylbenzyl 2,5‐dioxoran‐3‐ylmethyl ether (VBCE), was prepared by lithium bromide‐catalyzed addition of carbon dioxide to 4‐vinylbenxyl glycidyl ether (VBGE). Radical polymerization of the obtained VBCE was carried out using 2,2′‐azobisisobutyronitrile as an initiator. PolyVBCE with number‐averaged molecular weight higher than 13,800 was obtained by a solution polymerization in N,N‐dimethylformamide, N,N‐dimethylacetamide, dimethyl sulfoxide, and methyl ethyl ketone. The glass transition temperature and 5 wt % decomposition temperature of the polyVBCE were determined to be 52 and 305 °C by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBCE repeating unit can be also obtained via chemical modification of polyVBGE, that is, a lithium‐bromide‐catalyzed addition of carbon dioxide to a polyVBGE prepared from a radical polymerization of VBGE. Further copolymerization of VBCE with styrene gave the corresponding copolymer in a high yield. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and radical polymerization of styrene‐based monomer having a five‐membered cyclic dithiocarbonate structure

A styrene‐based monomer having a five‐membered cyclic dithiocarbonate structure, 4‐vinylbenzyl 1,3‐oxathiolane‐2‐thione‐5‐ylmethyl ether (VBTE), was synthesized from 4‐vinylbenzyl glycidyl ether (VBGE) and carbon disulfide in the presence of lithium bromide in 86% yield. Radical polymerization of VBTE in dimethyl sulfoxide by 2,2′‐azobisisobutyronitrile was carried out at 60 °C to afford the corresponding the polymer, polyVBTE, in 64% yield. PolyVBTE with number‐averaged molecular weight higher than 31,000 was obtained. The glass transition temperature (T_g) and 5 wt % decomposition temperature (T_d5) of the polyVBTE were evaluated to be 66 and 264 °C under nitrogen atmosphere by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBTE repeating unit could also be obtained via polymer reaction, that is, a lithium bromide‐catalyzed addition of carbon disulfide to a polyVBGE prepared from a radical polymerization of VBGE. Copolymerization of VBTE and styrene with various compositions efficiently gave copolymers of VBTE and styrene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Catalytic‐chain‐transfer polymerization of styrene revisited: The importance of monomer purification and polymerization conditions

The cobaloxime‐mediated catalytic‐chain‐transfer polymerization of styrene at 60 °C was studied with an emphasis on the effects of monomer purification and polymerization conditions. Commonly used purification methods, such as column chromatography and simple vacuum distillation, were not adequate for obtaining kinetic data to be used in mechanistic modeling. A purification regime involving inhibitor removal with basic alumina, followed by polymerization of the styrene in the presence of the cobaloxime and subsequent vacuum distillation, was found to be essential to this end. It was then possible to quantitatively investigate effects such as the initiator concentration and conversion dependencies of the apparent chain‐transfer constant that resulted from the occurrence of cobalt–carbon bond formation. A value of about 9 × 10³ was found for the true chain‐transfer constant to cobaloxime boron fluoride, that is, its value in the absence of cobalt–carbon bond formation. Furthermore, previous predictions were confirmed: the measured chain‐transfer constant decreased with increasing initiator concentration and conversion. Finally, it was confirmed that the presence of light increased the amount of free Co(II) catalyst in agreement with other studies. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 752–765, 2003     

Template atom transfer radical polymerization of a diaminopyrimidine‐derivatized monomer in the presence of a uracil‐containing polymer

Uracil‐derivatized monomer 6‐undecyl‐1‐(4‐vinylbenzyl)uracil and diaminopyrimidine‐derivatized monomer 2,6‐dioctanoylamido‐4‐methacryloyloxypyrimidine (DMP) were synthesized and polymerized by atom transfer radical polymerization (ATRP). A well‐defined, highly soluble, uracil‐containing polymer, poly[6‐undecyl‐1‐(4‐vinylbenzyl)uracil] (PUVU), was prepared in dioxane at 90 °C with CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine as the catalyst and methyl α‐bromophenylacetate as the initiator. PUVU was further used as a template for the ATRP of DMP. The enhanced apparent rate constant of the DMP polymerization in the presence of PUVU indicated that the ATRP of DMP occurred along the PUVU template. The template polymerization produced a stable and insoluble macromolecular complex, PUVU/poly(2,6‐dioctanoylamido‐4‐methacryloyloxypyrimidine). An X‐ray diffraction study confirmed that the complex had strandlike domains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6607–6615, 2006     

The role of monomer in the chain transfer reaction in cobaloxime‐mediated free‐radical polymerization

The role of monomer in catalytic chain transfer polymerization was studied by determination of the chain transfer constants of the tetraphenyl derivative of cobaloxime boron fluoride (COPhBF) in methyl methacrylate at 60°C varying the monomer concentration instead of the COPhBF concentration as is common practice. Toluene and tert‐butyl acetate were used as diluents in these studies and it was found that the chain transfer constants obtained in the present studies were not significantly different from those observed in conventional experiments. These results suggest the absence of a direct participation of monomer molecules in the hydrogen abstraction step in catalytic chain transfer.     

Synthesis and characterization of hydroxy‐bisphosphonate micrometer‐sized particles by dispersion polymerization of a new styrylbisphosphonate monomer

Bisphosphonates (BPs) are nonhydrolyzable pyrophosphate (P‐O‐P) analogs possessing two phosphonate groups linked to a single carbon (P‐C‐P). The hydroxy‐bisphosphonates (hydroxyBPs) are obtained when the hydroxy group is also linked to this bridging carbon. Their ability to form bidentate or tridentate chelates with calcium ions results in a high affinity to hydroxyapatite (HAP) in dentin, enamel and bones. In this study, we designed and prepared crosslinked poly(styrylbisphosphonate) (PStBP) micrometer‐sized particles by dispersion polymerization of the styrylbisphosphonate (StBP) and ethylene glycol dimethacrylate (EDMA) monomers. The new StBP monomer was synthesized in an efficient one‐pot synthesis using tris(trimethylsilyl)phosphite as the phosphorus source followed by methanolysis. The StBP monomer was successfully isolated and characterized as tri‐sodium salt. Polymerization of the StBP monomer was carried out in two steps: in situ conversion of the tri‐sodium StBP monomer back to its acid form, followed by radical dispersion polymerization in the presence of the crosslinker EDMA monomer. The resulting crosslinked PStBP micrometer‐sized particles retained the unique high affinity of the hydroxy‐bisphosphonate side groups to calcium ions and exhibited good adhesive properties to HAP. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Bulk polymerization of p‐dioxanone using a cyclic tin alkoxide as initiator

Poly(p‐dioxanone) with an inherent viscosity of over 1 dL/g has been synthesized using the cyclic tin alkoxide 1‐di‐n‐butyl‐1‐stanna‐2,5‐dioxacyclopentane as initiator. Poly(p‐dioxanone) was synthesized in bulk and the results have been compared with polymerizations using tin (II) 2‐ethylhexanoate (Sn(Oct)₂) as catalyst. Sn(Oct)₂ has often been reported to be an effective catalyst for the synthesis of poly(p‐dioxanone), but here it is compared with an initiator which is less prone to catalyze transesterification reactions. The results demonstrate that the cyclic tin initiator is a promising alternative for the synthesis of poly(p‐dioxanone) with a high inherent viscosity. Poly(p‐dioxanone) is a polymer with mechanical properties and a degradation rate suitable for tissue engineering applications. Both the cyclic tin initiator and Sn(Oct)₂ gave, under some reaction conditions, inherent viscosities around 1 dL/g. The best polymer synthesized using the cyclic tin initiator had a strain‐at‐break of 515% and a stress‐at‐break of 43 MPa. The inherent viscosity of this polymer was 1.16 dL/g, while Sn(Oct)₂ resulted in a polymer with an inherent viscosity less than 0.4 dL/g under the same reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5552–5558, 2007     

Surface‐initiated atom transfer radical polymerization of a new rhodanine‐based monomer for rapid magnetic removal of Co(II) ions from aqueous solutions

The present study reports synthesis and characterization of a new acrylamide‐based monomer containing rhodanine moiety, N‐3‐amino‐thiazolidine‐4‐one‐acrylamide (ATA). Poly(ATA)‐grafted magnetite nanoparticles (poly(ATA)‐g‐MNPs) were prepared using surface‐initiated atom transfer radical polymerization of the monomer on Fe₃O₄ nanoparticles. The grafted nanoparticles were characterized by Fourier transform infrared analysis, scanning electron microscopy, X‐ray diffraction, and vibrating sample magnetometry. The amount of the grafted polymer was 209 mg g⁻¹, as calculated from thermogravimetric analysis experiment. The capability of poly(ATA)‐g‐MNPs to remove Co(II) cations was shown under optimal conditions of contact time, pH, adsorbent dosage, and initial Co(II) concentration. About 86% of the Co(II) cations were removed over 7 minutes. The adsorption kinetics obeyed the pseudo–second‐order kinetic equation, and the Langmuir isotherm model best described the adsorption isotherm with a maximum adsorption capacity of 3.62 mg g⁻¹. The thermodynamic investigation showed spontaneous nature of the adsorption process (ΔG = −2.90 kJ mol⁻¹ at 25°C ± 1°C). In addition, the poly(ATA)‐g‐MNPs were regenerated by simply washing with an aqueous 0.1M HCl solution. The study of the reusability of the prepared magnetic sorbent revealed that the sorbent can be reused without a significant decrease in the extraction efficiency and be recovered by 95.4% after 7 cycles. These findings suggest that the grafted nanoparticles are stable and reusable adsorbent and can be potentially applied to water treatment in efficient removal of Co(II) cations.     

Two‐dimensional polymer synthesis through the topochemical polymerization of alkylenediammonium muconate as a multifunctional monomer

Here we demonstrate a unique two‐dimensional polymer synthesis through topochemical polymerization via polymer crystal engineering, which is useful for controlling and designing the polymerization reactivity as well as the polymer chain and crystal structures. We have succeeded in the synthesis of a sheet polymer through the polymerization of alkylenediammonium (Z,Z)‐muconate as a multifunctional 1,3‐diene monomer in the crystalline state under the irradiation of UV and γ‐rays or upon heating in the dark. The photopolymerization reactivity of several muconates and the structural control of the obtained polymer are described. The stereochemical structure of the polymer and the polymerization mechanism are discussed on the basis of the results of IR and NMR spectroscopy, thermogravimetric measurements, and solid‐state hydrolysis for the transformation into poly(muconic acid). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3922–3929, 2004     

Synthesis of hyperbranched polymers via proton‐transfer polymerization of acrylate monomer containing two hydroxy groups

The hyperbranched polymer 2 was produced via triphenylphosphine initiated polymerization of the acrylate monomer 1 containing two hydroxy groups. The reaction resulting in 2 is based on a Michael‐type addition followed by a proton‐transfer process. The molecular weights evaluated by VPO measurements were vanging between 1 170–2 700 g/mol. The results of the methanolysis experiments of the polymers were used to determine the degrees of branching, that ranged between 0.45 and 0.60. In this polymerization, the hydroxy groups of the monomer and of the polymer are latent propagating species, which are converted into the corresponding anions, which are the actual propagating species active during the proton‐transfer reactions. The proton‐transfer occur frequently during this polymerization in order to afford the formation of hyperbranched polymers.     

Radical polymerization of new functional monomer: Methacryloyl isocyanate containing 4‐chloro‐1‐phenol

New functional monomer methacryloyl isocyanate containing 4‐chloro‐1‐phenol (CPHMAI) was prepared on reaction of methacryloyl isocyanate (MAI) with 4‐chloro‐1‐phenol (CPH) at low temperature and was characterized with IR, ¹H, and ¹³C‐NMR spectra. Radical polymerization of CPHMAI was studied in terms of the rate of polymerization, solvent effect, copolymerization, and thermal properties. The rate of polymerization of CPHMAI has been found to be smaller than that of styrene under the same conditions. Polar solvents such as dimethylsulfoxide (DMSO) and N,N‐dimethyl formamide (DMF) were found to slow the polymerization. Copolymerization of CPHMAI (M₁) with styrene (M₂) in tetrahydrofuran (THF) was studied at 60°C. The monomer reactivity ratio was calculated to be r₁ = 0.49 and r₂ = 0.66 according to the method of Fineman—Ross. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 469–473, 2000     

Investigation of Mizoroki‐Heck coupling polymerization as a catalyst‐transfer condensation polymerization for synthesis of poly(p‐phenylenevinylene)

Mizoroki‐Heck coupling polymerization of 1,4‐bis[(2‐ethylhexyl)oxy]‐2‐iodo‐5‐vinylbenzene ( 1 ) and its bromo counterpart 2 with a Pd initiator for the synthesis of poly(phenylenevinylene) (PPV) was investigated to see whether the polymerization proceeds in a chain‐growth polymerization manner. The polymerization of 1 with ^tBu₃PPd(Tolyl)Br ( 10 ) proceeded even at room temperature when 5.5 equiv of Cy₂NMe (Cy = cyclohexyl) was used as a base, but the molecular weight distribution of PPV was broad. The polymerization of 2 hardly proceeded at room temperature under the same conditions. In the polymerization of 1 , PPV with H at one end and I at the other was formed until the middle stage, and the polymer end groups were converted into tolyl and H in the final stage. The number‐average molecular weight (M_n) did not increase until about 90% monomer conversion and then sharply increased after that, indicating conventional step‐growth polymerization. The occurrence of step‐growth polymerization, not catalyst‐transfer chain‐growth polymerization, may be interpreted in terms of low coordination ability of H‐Pd(II)‐X(^tBu₃P) (X = Br or I), formed in the catalytic cycle of the Mizoroki‐Heck coupling reaction, to π‐electrons of the PPV backbone; reductive elimination of H‐X from this Pd species with base would take place after diffusion into the reaction mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 543–551     

A cyclic selenium‐based reversible addition‐fragmentation chain transfer agent mediated polymerization of vinyl acetate

A cyclic selenium‐based reversible addition‐fragmentation chain transfer (RAFT) agent, 5,5‐dimethyl‐3‐phenyl‐2‐selenoxo‐1,3‐selenazolidin‐4‐one (RAFT‐Se), was synthesized and utilized in the RAFT polymerizations of vinyl acetate (VAc). Its analog, 5,5‐dimethyl‐3‐phenyl‐2‐thioxothiazolidin‐4‐one (RAFT‐S), was also used in RAFT polymerizations for comparison under identical conditions. The RAFT polymerizations of VAc with RAFT‐Se were moderately controlled evidenced by the increase of molecular weights with conversion, despite the slightly high M_w/M_n (less than 1.90), whereas the molecular weights were poorly controlled in the presence of RAFT‐S (2.00 < M_w/M_n < 2.30). Thanks to its unusual cyclic structure of RAFT‐Se, one or more RAFT‐Se species was incorporated into the resultant poly(VAc) as revealed by the results of cleavage of polymer and atomic absorption spectroscopy. Considering the biorelated functions of both poly(VAc) and Se element, this work undoubtedly provided a successful methodology of how to incorporate high content of Se into a molecular weight controlled poly(VAc). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Palladium‐mediated polymerization of cyclic diazoketones

Palladium‐mediated polymerization of cyclic diazoketones was investigated. Although cyclic diazoketones 1a,b derived from cyclohexanone and 1‐tetralone did not homopolymerize, they can be used as a comonomer for copolymerization with polymerizable acyclic diazoketones. On the other hand, an α,β‐unsaturated cyclic diazoketone 2a prepared from 2‐cyclohexen‐1‐one polymerized to give a polymer poly 2a ′ with M_n = 1400 in a 23.8% yield. Addition of some nucleophiles to C?C bond in poly 2a ′ was carried out. Copolymerization of 2a and its dimethyl‐substituted analogues 2b,c with acyclic diazoketones was also investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1638–1648, 2008     

Radical polymerization behavior of a vinyl monomer bearing five‐membered cyclic carbonate structure and reactions of the obtained polymers with amines

Radical polymerization behavior of a vinyl substituted cyclic carbonate, 4‐phenyl‐5‐vinyl‐1,3‐dioxoran‐2‐one ( 1 ), is described. Radical polymerization of 1 proceeded through selective vinyl polymerization to produce polymers bearing carbonate groups in the side chain, in contrast to that of an oxirane analogue of 1 , 1‐phenyl‐2‐vinyl oxirane that proceeds via the selective ring‐opening fashion. Although the homopolymerization of 1 produce polymers in relatively lower yield, copolymerizations effectively provided cyclic carbonate‐containing copolymers. Nucleophilic addition of primary amines to the resulting homopolymers and copolymers produced the corresponding multifunctional polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 584–592, 2005     

Catalyzed chain transfer to monomer in free radical polymerization

The kinetics and the molecular weight distribution in the radical polymerization of methyl methacrylate in the presence of a cobalt complex of hematoporphyrin tetramethyl ether is investigated. The whole complex of experimental data indicates the new kinetic phenomenon—catalyzed chain transfer to monomer. The possible mechanism of the chain transfer and the chain transfer agent regeneration acts is suggested.     

Reversible addition‐fragmentation chain transfer polymerization of a typical hydrophobic monomer of styrene within microreactor of shell‐corona hollow microspheres suspending in water

Reversible addition‐fragmentation chain transfer (RAFT) polymerization of a typical hydrophobic monomer of styrene within microreactor of shell‐corona hollow microspheres of poly(styrene‐co‐methacrylic acid) suspending in water is studied. The shell‐corona hollow microspheres contain a hydrophilic corona of poly(methacrylic acid) (PMAA) and a cross‐linked polystyrene shell, which can suspend in water because of the hydrophilic corona of PMAA. The size of the shell‐corona hollow microspheres is about 289 nm and the extent of the microcavity of the hollow microsphere is 154 nm. These shell‐corona hollow microspheres can act as microreactor, within which the typical hydrophobic monomer of styrene, the RAFT agent of S‐benzyl dithiobenzoate and the initiator of 2,2′‐azobisisobutyronitrile can be encapsulated and RAFT polymerization of styrene takes place in well controlled manner in water. It is found that the resultant polymer of polystyrene has a competitively low polydispersity index and its number‐average molecular weight linearly increases with monomer conversion. The method is believed to be a new strategy of RAFT polymerization of hydrophobic monomer in aqueous solution. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Atom transfer radical polymerization of 1-phenoxycarbonyl ethyl methacrylate monomer

Atom transfer radical polymerization conditions with copper(I) bromide/2,2^′-bipyridine (Cu/2,2^′-bpy) as the catalyst system were employed for the homopolymerization and random copolymerization of 1-phenoxycarbonyl ethyl methacrylate (PCMA) with methyl methacrylate (MMA). Temperature studies indicated that the polymerizations occurred smoothly in bulk at 110 °C. Poly(PCMA)(polydispersity index=1.27) homopolymer was characterized and then used as macroinitiator for increasing its molecular weight. The homopolymerization of PCMA was also carried out under free radical conditions using 2,2^′-azobisisobutyronitrile as an initiator.The monomer and polymers were characterized by FT-IR and ¹H and ¹³C-NMR techniques. The glass transition temperatures, the solubility parameters and average-molecular weights of the polymers were determined. Thermal stabilities of the polymers were given as compared with each other by using TGA curves. Thermal degradation products of poly(PCMA)s obtained by ATRP and free radical polymerization were compared with each other by using ¹H-NMR technique.