Sulfonated silica‐based electrolyte nanocomposite membranes

New functionalized particles were prepared by attaching sulfonated aromatic bishydroxy compounds onto fumed silica surface. First, a bromophenyl group was introduced onto the silica surface by reaction of bromophenyltrimethoxysilane with fumed silica. Then, sulfonated bishydroxy aromatic compounds were chemically attached to the silica surface by nucleophilic substitution reactions. The structure of the modified silica was characterized by elemental analysis: ¹³C‐NMR, ²⁹Si‐NMR, and FTIR. Afterward, novel inorganic–organic electrolyte composite membranes based on sulfonated poly(ether ether ketone) have been developed using the sulfonated aromatic bishydroxy compounds chemically attached onto the fumed silica surface. The composite membrane prepared using silica with sulfonated hydroxytelechelic, containing 1,3,4‐oxadiazole units, has higher proton conductivity values in all range of temperatures (40–140 °C) than the membrane containing only the plain electrolyte polymer, while the methanol permeability determined by pervaporation experiment was unchanged. A proton conductivity up to 59 mS cm^?1 at 140 °C was obtained. The combination of these effects may lead to significant improvement in fuel cells (fed with hydrogen or methanol) at temperatures above 100 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2278–2298, 2006     

Polyfluorides and Neat Fluorine as Host Material in Matrix‐Isolation Experiments

The use of neat fluorine in matrix isolation is reported, as well as the formation of polyfluoride monoanions under cryogenic conditions. Purification procedures and spectroscopic data of fluorine are described, and matrix shifts of selected molecules and impurities in solid fluorine are compared to those of common matrix gases (Ar, Kr, N₂, Ne). The reaction of neat fluorine and IR‐laser ablated metal atoms to yield fluorides of chromium (CrF₅), palladium (PdF₂), gold (AuF₅), and praseodymium (PrF₄) has been investigated. The fluorides have been characterized in solid fluorine by IR spectroscopy at 5 K. Also the fluorination of Kr and the photo‐dismutation of XeO₄ have been studied by using IR spectroscopy in neat fluorine. Formation of the [F₅]^? ion was obtained by IR‐laser ablation of platinum in the presence of fluorine and proven in a Ne matrix at 5 K by two characteristic vibrational bands of [F₅]^? at $\tilde \nu $ =850.7 and 1805.0 cm^?1 and its photo‐behavior.     

Synthesis,characterization, and properties of novel ladderlike phosphorus‐containing polysilsesquioxanes

Novel ladderlike polysilsesquioxanes that contain phosphorus were successfully synthesized by the sol–gel method. The polysilsesquioxanes were characterized by Fourier transform infrared spectroscopy, ²⁹Si NMR, and X‐ray diffraction. The characterizations demonstrated that the polymer possesses a typical ladderlike structure. The thermogravimetric and differential scanning calorimetric data revealed that the polysilsesquioxanes possess excellent thermal stability. A kinetic analysis of thermal degradation showed that the activation energy of thermal degradation is 187 kJ/mol, according to Kissinger's method. The activation energy of thermal degradation normally increases with conversion (from 171 to 309 kJ/mol) according to Ozawa's method. The average activation energy, calculated by Ozawa's method, was 209 kJ/mol. The scanning electron microscopic photograph and Si and P mappings of ladderlike polysilsesquioxanes showed that the particles were uniformly dispersed at the molecular level and that the sizes of the polysilsesquioxane particles were less than 100 nm. The ultraviolet–visible spectra of the ladderlike polysilsesquioxanes revealed no absorbance in the range of 400–800 nm. Ladderlike polysilsesquioxanes possess excellent optical transparency and excellent flame retardance. This transmittance may be used as a criterion for identifying the formation of a homogeneous phase. These polymers have great potential in waveguide applications. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1371–1379, 2003     

Open spaces and molecular motions in carbon‐black‐ and silica‐loaded SBR investigated using positron annihilation

Lifetime spectra of positrons were measured for styrene–butadiene rubber (SBR) vulcanizates filled with carbon black (CB) or silica. At temperatures between 10 and 420 K, no large difference between the size of the open spaces in the CB/SBR vulcanizate and that in the specimen without the filler was observed. Above the glass‐transition temperature (T_g = 230 K), the same was true for the silica/SBR vulcanizate. Below T_g, however, the size of the open spaces was reduced by the incorporation of silica as a result of the suppression of local molecular motions in the SBR. The density of the open spaces was reduced by the incorporation of the fillers. However, above 400 K it started to increase in the silica/SBR vulcanizate. For the CB/SBR vulcanizate, the introduction of open spaces was well suppressed, even at 420 K. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 835–842, 2001     

Preparation and characterization of temperature‐ and pH‐responsive diblock copolymers and their silica‐coated nanoparticles

Multiresponsive amphiphilic poly(N,N‐dimethylaminoethyl methacrylate)‐b‐poly(N‐isopropylacrylamide) (PDMAEMA‐b‐PNIPAM) was successfully synthesized by reversible addition‐fragmentation chain transfer polymerization. Poly(N,N‐dimethylaminoethyl methacrylate)‐b‐poly(N‐isopropylacrylamide) has thermal and pH stimuli responsiveness. Their lower critical solution temperature and hydrodynamic radius can be adjusted by varying the copolymer composition, block length, solution pH, and temperature. In addition, a convenient method has been established to prepare cross‐linked silica‐coated nanoparticles with PDMAEMA‐b‐PNIPAM micelles as a template, resulting in good organic/inorganic hybrid nanoparticles defined as 175 to 220 nm. The structure and morphology were characterized by proton nuclear magnetic resonance (₁HNMR), Fourier‐transform infrared spectroscopy (FT‐IR), transmission electron microscopy (TEM), and transmission electron microscopy‐energy dispersive X‐ray spectroscopy (TEM‐EDS).     

Asymmetric hydrogenation of ketones catalyzed by silica‐supported chitosan‐iron‐nickel complex

A new silica‐supported biopolymer‐metal complex, silica‐supported chitosan‐iron‐nickel complex was prepared by a very simple method. This complex catalyst can be used as a catalyst in the asymmetric hydrogenation of propiophenone to (R)‐(+)‐1‐phenyl‐1‐propanol and acetophenone to (R)‐(+)‐1‐phenyl ethanol in 91.7 and 77.7% optical yields, respectively, at 110°C and under 70 kg/cm² pressure. The catalyst could be reused several times without any remarkable change in the catalytic activity. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis,characterization, and curing kinetics of novel ladder‐like polysilsesquioxanes containing side‐chain maleimide groups

Two ladder‐like polysilsesquioxanes (LPS) containing side‐chain maleimide groups have been synthesized successfully by reacting N‐(4‐hydroxyphenyl)maleimide (HPM) with LPS containing 100 mol % of chloropropyl groups (Ladder A ) and 50 mol % of each methyl and chloropropyl group (Ladder B ). HPM was synthesized by reacting maleic anhydride with 4‐aminophenol, and the resulting amic acid was imidized using p‐toluenesulfonic acid as a catalyst (Scheme 1 ). The LPSs were characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), proton‐decoupled ¹³C NMR, ²⁹Si NMR, wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Characterization indicated that these polymers had ordered ladder‐like structures with possible defects. These polymers were soluble in common solvents at ambient temperature, which suggested that they were not crosslinked. Both the polymers and the HPM were cured, and their kinetics were followed by dynamic DSC. The Ozawa and Kissinger methods were used to calculate activation energies for curing. Curing increased the temperature at which both 5% weight loss and maximum rate of weight loss were observed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4036–4046, 2004     

Preparation and enhanced properties of poly(propylene)/ silica‐grafted‐hyperbranched polyester nanocomposites

A series of poly(propylene) silica‐grafted‐hyperbranched polyester nanocomposites by grafting the modified hyperbranched polyester (Boltorn? H20), possessing theoretically 50% end carboxylic groups and 50% end hydroxyl groups, which endcapped with octadecyl isocyanate (C19), onto the surface of SiO₂ particles (30 nm) through 3‐glycidoxy‐propyltrimethoxysilane (GPTS) was prepared. The effect of silica‐grafted‐modified Boltorn? H20 on the mechanical properties of polypropylene (PP) was investigated by tensile and impact tests. The morphological structure of impact fracture surface and thermal behavior of the composites were determined by scanning electron microscopy (SEM) and differential scanning calorimetry (DSC), respectively. The melt viscosity of composites was investigated by melt flow index (MFI). The obtained results showed that: (1) the modified Boltorn? H20 was successfully grafted onto the SiO₂ surface confirmed by FT‐IR and X‐ray photoelectron spectroscopy (XPS) analysis; (2) the incorporation of silica‐grafted‐modified Boltorn? H20 (3–5 wt% SiO₂) greatly enhanced the notched impact strength as well the tensile strength of the composites; (3) the incorporation of silica‐grafted‐modified Boltorn? H20 had no influence on the melting temperature and crystallinity of PP phase; (4) the MFI of PP composites increased when the silica‐grafted‐modified Boltorn? H20 particles were added compared with PP/SiO₂ or PP/SiO₂‐GPTS composites. Copyright © 2004 John Wiley & Sons, Ltd.     

Filler‐polymer interactions of styrene and butadiene units in silica‐filled styrene–butadiene rubber compounds

Styrene–butadiene rubber (SBR) is a copolymer of styrene and butadiene, and the butadiene unit is composed of cis‐1,4‐, trans‐1,4‐, and 1,2‐components. Filler‐polymer interactions of each component of SBR in silica‐filled SBR compounds were examined by microstructure analysis of the bound and unbound rubbers. The composition ratio of butadiene and styrene units (butadiene/styrene) of the bound rubber was higher than that of the compounded rubber. Of the butadiene units, the 1,2‐component of the bound rubber was more abundant than the cis‐1,4‐ and trans‐1,4‐components. The filler‐polymer interaction of the butadiene unit with silica was stronger than that of the styrene unit, and the interaction of the 1,2‐component was stronger as compared with the others. The butadiene–styrene ratio of the bound rubber of the compounds containing the silane coupling agent was lower than for the compounds without the silane. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 577–584, 2004     

Catalytic behavior of silica‐supported chitosan‐platinum‐iron complex for asymmetric hydrogenation of ketones

Silica‐supported chitosan‐platinum‐iron complex (SiO₂‐CS‐Pt‐Fe) is prepared by a simple method from silica, chitosan, H₂PtCl₆ · 6H₂O and FeCl₃. It has been found to be an effective chiral catalyst for the asymmetric hydrogenation of 2‐hexanone to give (S)‐(+)‐2‐hexanol and methyl acetoacetate to give methyl‐(S)‐(+)‐3‐hydroxybutyrate in 85.4 and 75.0% optical yields, respectively, if a proper content of Pt and Fe in SiO₂‐CS‐Pt‐Fe complex and appropriate reaction conditions are selected at room temperature and under 1 atm H₂. The catalyst could be reused several times without any remarkable change in optical catalytic activity. Copyright © 2004 John Wiley & Sons, Ltd.     

Nanocavitation in silica filled styrene‐butadiene rubber regulated by varying silica‐rubber interfacial bonding

The influence of filler‐matrix interfacial bonding on the nanocavitation of rubber materials has not been explored clearly. We herein report the nanocavitation modes and geometrical features impacted by varying the silica‐styrene‐butadiene rubber interfacial bonding. The interfacial bonding is tuned by grafting different amount of multi‐functional silane coupling agents on to the silica nanoparticles. By using synchrotron radiation small angle X‐ray scattering measurements, 2 major classes of cavitation were detected. When the interfacial strength was weak, fibrillar nanocavitation, with lengths ranging from 120 to 217 nm and diameter of the same order of the particle size, was generated by interfacial decohesion at the particle pores along the stretching direction. After grafting modification, the fibril‐like nanocavitation almost disappears and nanocavitation content decreases first at lower grafting density; then nanocavitation content increases at higher grafting density, where nanocavitation in confined rubber regions dominates. It is finally proposed that nanoparticle interfacial strengthening can change the cavitation mode from interfacial decohesion to confined rubber matrix nanocavitation, which exhibits more favorable prevention of the macroscopic failure by cracking.     

Three‐dimensional structure in holographic polymer‐dispersed liquid crystals

Polymer‐dispersed liquid crystals, heterogeneous structures consisting of a liquid crystal and a polymer, are promising materials for generating holograms with switchable diffraction efficiency. The experiments presented here reveal that the generation of a face‐centered cubic structure can be achieved by exposing a liquid crystal/reactive monomer mixture to the interference pattern of four coherent laser beams under appropriate geometrical conditions. Copyright © 2012 John Wiley & Sons, Ltd.     

Green Synthesis of 3‐Hydroxynaphthalene‐1,4‐dione Derivatives via Microwave‐Assisted Three‐Component Reactions in Neat Water

A novel and efficient access to 2‐(argio(3‐methyl‐5‐oxo‐1‐phenyl‐4,5‐dihydro‐1H‐pyrazol‐4‐yl)methyl)‐3‐hydroxynaphthalene‐1,4‐dione derivatives from readily available substrates in neat water is described with aid of microwave irradiation. The results of our study provide a green, simple and practical one‐pot approach to the synthesis of 3‐hydroxynaphthalene‐1,4‐dione analogs in excellent yields without further purification.     

Cocrystal Formation through Mechanochemistry: from Neat and Liquid‐Assisted Grinding to Polymer‐Assisted Grinding

Mechanochemistry is an effective method for the preparation of multicomponent crystal systems. In the present work, we propose an alternative to the established liquid‐assisted grinding (LAG) approach. Polymer‐assisted grinding (POLAG) is demonstrated to provide a new class of catalysts for improving reaction rate and increasing product diversity during mechanochemical cocrystallization reactions. We demonstrate that POLAG provides advantages comparable to the conventional liquid‐assisted process, whilst eliminating the risk of unwanted solvate formation as well as enabling control of resulting particle size. It represents a new approach for the development of functional materials through mechanochemistry, and possibly opens new routes toward the understanding of the mechanisms and pathways of mechanochemical cocrystal formation.     

PEG Click‐Triazole Palladacycle: An Efficient Precatalyst for Palladium‐Catalyzed Suzuki‐Miyaura and Copper‐free Sonogashira Reactions in Neat Water

A novel water‐soluble, phosphine‐free PEG "click" triazole palladacycle has been successfully synthesized. As a precatalyst, the palladacycle exhibited superior catalytic activity towards Suzuki‐Miyaura and copper‐free Sonogashira cross‐coupling in neat water with the turnover numbers (TONs) of up to 9.8×10⁵. In addition, the catalyst could be reused at least 3 times without significant loss of reactivity.     

Photoluminescence of bridged polysilsesquioxanes containing urea groups: Doping with Safranine‐O to generate red‐light emission

Bridged polysilsesquioxanes containing urea groups (ureasils) exhibit a broad photoluminescent emission in the visible spectrum. For a particular bridged polysilsesquioxane synthesized by the hydrolytic condensation of a precursor prepared by reaction of 4,4′‐[1,3 phenylenebis‐(1‐methylethylidene)]bis(aniline) (BSA) with 3‐(isocyanatepropyl)triethoxysilane (IPTES), we show that the broad photoluminescent band could be transformed into a relatively narrow emission band located in the red region of the spectra, by doping with Safranine‐O. The spectral overlap between the host emission and the dye absorption generated an efficient energy transfer process (antenna effect). Absorption, emission, and triplet–triplet absorption spectra revealed an efficient dispersion of the dye in the ureasil as well as the presence of strong host‐guest specific interactions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 289–296, 2008     

Methylaluminoxane‐free ethylene polymerization with in situ activated zirconocene triisobutylaluminum catalysts and silica‐supported stabilized borate cocatalysts

Heterogenization of tris(pentafluorophenyl)borane [B(C₆F₅)₃] on a silica support stabilized with chlorotriphenylmethane (CICPh₃) and N,N‐dimethylaniline (HNMe₂Ph) creates the following supported borane cocatalysts: [HNMe₂Ph]⁺[B(C₆F₅)₃‐SiO₂]^? and [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^?. These supported catalysts were reacted with Cp₂ZrCl₂ TIBA in situ to generate active metallocene species in the reactor. Triisobutylaluminum (TIBA) was a good coactivator for dichloro‐zirconocene, acting as the prealkylating agent to generate cationic zirconocene (Cp₂ZrC₄H₉⁺). The catalytic performances were determined from the kinetics of ethylene‐consumption profiles that were independent of the time dedicated to the activation of the catalysts. The scanning electron microscopy‐energy dispersive X‐ray measurements showed that B(C₆F₅)₃ dispersed uniformly on the silica support. Under our reaction conditions, the [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? system had higher productivity and weight‐average molecular weight than the [HNMe₂Ph]⁺[B(C₆F₅)₃‐SiO₂]^? system. For the [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? system, the productivity increased with the amount catalyst; however, the polydispersity index of polyethylene synthesized did not change. The final shape of polymer particles was a larger‐diameter version of the original support particle. The polymer particles synthesized with supported [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? catalysts had larger diameters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3240–3248, 2002     

Atom transfer radical polymerization in aqueous dispersed media

During the last decade, atom transfer radical polymerization (ATRP) received significant attention due to its exceptional capability of synthesizing polymers with pre-determined molecular weight, well-defined molecular architectures and various functionalities. It is economically and environmentally attractive to adopt ATRP to aqueous dispersed media, although the process is challenging. This review summarizes recent developments of conducting ATRP in aqueous dispersed media. The issues related to retaining “controlled/living” character as well as colloidal stability during the polymerization have to be considered. Better understanding the ATRP mechanism and development of new initiation techniques, such as activators generated by electron transfer (AGET) significantly facilitated ATRP in aqueous systems. This review covers the most important progress of ATRP in dispersed media from 1998 to 2009, including miniemulsion, microemulsion, emulsion, suspension and dispersed polymerization.