On the reactivity of platina‐β‐diketones: a straightforward synthesis of trans‐acetylchlorobis(phosphine)platinum(II) complexes and their reactivity

The platina‐β‐diketone [Pt₂{(COMe)₂H}₂(µ‐Cl)₂] ( 1 ) was found to react with monodentate phosphines to yield acetyl(chloro)platinum(II) complexes trans‐[Pt(COMe)Cl(PR₃)₂] (PR₃ = PPh₃, 2a ; P(4‐FC₆H₄)₃, 2b ; PMePh₂, 2c ; PMe₂Ph, 2d ; P(n‐Bu)₃, 2e ; P(o‐tol)₃, 2f ; P(m‐tol)₃, 2g ; P(p‐tol)₃, 2h ). In the reaction with P(o‐tol)₃ the methyl(carbonyl)platinum(II) complex [Pt(Me)Cl(CO){P(o‐tol)₃}] ( 3a ) was found to be an intermediate. On the other hand, treating 1 with P(C₆F₅)₃ led to the formation of [Pt(Me)Cl(CO){P(C₆F₅)₃}] ( 3b ), even in excess of the phosphine. Phosphine ligands with a lower donor capability in complexes 2 and the arsine ligand in trans‐[Pt(COMe)Cl(AsPh₃)₂] ( 2i ) proved to be subject to substitution by stronger donating phosphine ligands, thus forming complexes trans‐[Pt(COMe)Cl(L)L′] (L/L′ = AsPh₃/PPh₃, 4a ; PPh₃/P(n‐Bu)₃, 4b ) and cis‐[Pt(COMe)Cl(dppe)] ( 4c ). Furthermore, in boiling benzene, complexes 2a – 2c and 2i underwent decarbonylation yielding quantitatively methyl(chloro)platinum(II) complexes trans‐[Pt(Me)Cl(L)₂] (L = PPh₃, 5a ; P(4‐FC₆H₄)₃, 5b ; PMePh₂, 5c ; AsPh₃, 5d ). The identities of all complexes were confirmed by ¹H, ¹³C and ³¹P NMR spectroscopy. Single‐crystal X‐ray diffraction analyses of 2a ·2CHCl₃, 2f and 5b showed that the platinum atom is square‐planar coordinated by two phosphine ligands (PPh₃, 2a ; P(o‐tol)₃, 2f ; P(4F‐C₆H₄)₃, 5b ) in mutual trans position as well as by an acetyl ligand ( 2a, 2f ) and a methyl ligand ( 5b ), respectively, trans to a chloro ligand. Single‐crystal X‐ray diffraction analysis of 3b exhibited a square‐planar platinum complex with the two π‐acceptor ligands CO and P(C₆F₅)₃ in mutual cis position (configuration index: SP‐4‐3). Copyright © 2005 John Wiley & Sons, Ltd.     

Well‐Defined Iron Complexes as Efficient Catalysts for “Green” Atom‐Transfer Radical Polymerization of Styrene,Methyl Methacrylate,and Butyl Acrylate with Low Catalyst Loadings and Catalyst Recycling

Environmentally friendly iron(II) catalysts for atom‐transfer radical polymerization (ATRP) were synthesized by careful selection of the nitrogen substituents of N,N,N‐trialkylated‐1,4,9‐triazacyclononane (R₃TACN) ligands. Two types of structures were confirmed by crystallography: “[(R₃TACN)FeX₂]” complexes with relatively small R groups have ionic and dinuclear structures including a [(R₃TACN)Fe(μ‐X)₃Fe(R₃TACN)]⁺ moiety, whereas those with more bulky R groups are neutral and mononuclear. The twelve [(R₃TACN)FeX₂]_n complexes that were synthesized were subjected to bulk ATRP of styrene, methyl methacrylate (MMA), and butyl acrylate (BA). Among the iron complexes examined, [{(cyclopentyl)₃TACN}FeBr₂] ( 4 b ) was the best catalyst for the well‐controlled ATRP of all three monomers. This species allowed easy catalyst separation and recycling, a lowering of the catalyst concentration needed for the reaction, and the absence of additional reducing reagents. The lowest catalyst loading was accomplished in the ATRP of MMA with 4 b (59 ppm of Fe based on the charged monomer). Catalyst recycling in ATRP with low catalyst loadings was also successful. The ATRP of styrene with 4 b (117 ppm Fe atom) was followed by precipitation from methanol to give polystyrene that contained residual iron below the calculated detection limit (0.28 ppm). Mechanisms that involve equilibria between the multinuclear and mononuclear species were also examined.     

Ligand Size Effect on PdLn Oxidative Addition with Aryl Bromide: A DFT Study

The process and mechanism of the ligand volume controlled Pd(PR₃)₂ (PR₃=PH₃, PMe₃, and PtBu₃) oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like screening model. Association pathway and dissocia-tion pathway were investigated by the comparison of several energies. The cleavage energy of Pd(PR₃)₂ complex was calculated, as well as the oxidative addition reaction barrier energy of Pd(PR₃)_n (n=1,2) with aryl bromide in N,N-dimethylformamide solvent. This study proved that the ligands volume possessed a great impact on the mechanism of oxidative addition: less bulky ligand palladium associated with aryl bromide via two donor ligands,but larger bulky ligand palladium coordinated via monoligand.     

Chemistry of platinum hydrides : XXV. Preparation and characterization of platinum(II) hydridotin complexes containing bulky phosphines

Platinum(II) hydridotin complexes containing bulky phosphine ligands, trans-Pt(H)L₂(SnR₃) have been prepared from: (i) the equimolar reaction between corresponding platinum(II) dihydride complexes and HSnR₃ (Cy = cyclohexyl), P-i-Pr₃, P-t-BuPh₂, P-t-Bu₂Me; R = Ph), (ii) the oxidative addition of the corresponding zerovalent complexes, Pt⁰L₂, with HSnR₃ (L = P-i-Pr₃, P-t-BuPh₂; R = Ph), (iii) the reaction of the corresponding platinum(II) dihydride complexes with ClSnR₃ in the presence of pyridine in benzene (L = P-i-Pr₃, P-t-BuPh₂; R = CH₃, n-Bu), (iv) the sodium borohydride reduction of the corresponding hydridochloride complexes Pt(H)Cl(PR₃)₂ with ClSnR₃ in THF (L = PCy₃; R = Ph), these compounds have been characterized by their elemental analysis, infrared, ¹H and ³¹P NMR spectral data.     

Investigation of Suzuki–Miyaura catalyst‐transfer polycondensation of AB‐type fluorene monomer using coordination‐saturated aryl Pd(II) halide complexes as initiators

Novel triarylamine‐based coordination‐saturated aryl Pd(II) halide complexes ligated by PEt₃, PCy₃, and P(o‐tol)₃ were successfully synthesized by direct oxidative addition of aryl halide to the corresponding Pd(0) precursors. Suzuki–Miyaura coupling polymerization of 2‐(7‐halide‐9,9‐dioctylfluoren‐2‐yl)?1,3,2‐dioxaborinane with these Pd(II) complexes as initiators was investigated for the synthesis of poly(fluorene)s with triarylamine end group. Pd(II) complexes with PCy₃ or P(o‐tol)₃ exhibited catalytic activity and realized the catalyst‐transfer polycondensation at 75 °C and room temperature, respectively, while the polymerization using Pd(II) catalyst ligated by PEt₃ did not proceed, which indicated that the bulky phosphine ligands could facilitate the reductive elimination and further promote the polymerization. In addition, the dimeric Pd(II) complex with P(o‐tol)₃ can convert into monomeric Pd(II) intermediate with an open coordination site, which had a higher activity. The end groups of the afforded polyfluorene were analyzed by matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectrometry, in which the Ar/H end groups are indicative of the catalyst‐transfer polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1457–1463     

Rhodium/Phosphine catalysed selective hydroformylation of biorenewable olefins

This work reports rhodium catalyzed selective hydroformylation of natural olefins like eugenol, estragole, anethole, prenol and isoprenol using biphenyl based Buchwald phosphine ligands (S‐Phos ( L ₁ ), t‐Bu XPhos ( L ₂ ), Ru‐Phos ( L ₃ ), Johnphos ( L ₄ ) and DavePhos ( L ₅ ). Ru‐Phos ( L ₃ ) ligand exhibited high impact on the hydroformylation of eugenol providing high selectivity (90%) of linear aldehyde as major product. In addition, internal natural olefins like anethole and prenol provided moderate to high selectivity (65% and 85% respectively) of branched aldehydes as a major products. The various reaction parameters such as influence of ligands, P/Rh ratio, syngas pressure, temperature, time and solvents have been studied. A high activity and selectivity gained on the way to the linear aldehydes it may be due to the bulky, steric cyclohexyl and isopropoxy groups present in L ₃ phosphine ligand. Moreover, this catalytic system was smoothly converting natural olefins into corresponding linear and branched aldehydes with higher selectivity under the mild reaction conditions.     

A Combined Experimental and Computational Study on the Cycloisomerization of 2‐Ethynylbiaryls Catalyzed by Dicationic Arene Ruthenium Complexes

Ruthenium‐catalyzed cycloisomerization of 2‐ethynylbiaryls was investigated to identify an optimal ruthenium catalyst system. A combination of [η⁶‐(p‐cymene)RuCl₂(PR₃)] and two equivalents of AgPF₆ effectively converted 2‐ethynylbiphenyls into phenanthrenes in chlorobenzene at 120 °C over 20 h. Moreover, 2‐ethynylheterobiaryls were found to be favorable substrates for this ruthenium catalysis, thus achieving the cycloisomerization of previously unused heterocyclic substrates. Moreover, several control experiments and DFT calculations of model complexes were performed to propose a plausible reaction mechanism.     

The Effect of Metal‐Ligand Affinity on Fe3O4_Supported Co–Rh Catalysts for Dicyclopentadiene Hydroformylation

The catalytic performances of Co‐Rh/Fe₃O₄ catalysts modified with phosphine ligands (PPh₃) and its analogues on dicyclopentadiene hydroformylation were evaluated. Among these catalysts, Co‐Rh/Fe₃O₄ modified with tris(p‐trifluoromethylphenyl)phosphine was determined to be effective for monoformyltricyclodecanes production, whereas Co‐Rh/Fe₃O₄ modified with PPh₃ or tri‐p‐tolylphosphine was effective for the diformyltricyclodecanes production. To investigate the ligand effects, the complex catalyst system (Co‐Rh/Fe₃O₄ and phosphine ligand) was subjected to pretreatment with syngas and then characterized by thermogravimetry and differential thermal analysis (TG‐DTA). It was determined that the threshold decomposition temperature reflected the corresponding Rh‐phosphine interaction strength, affecting the catalytic selectivity toward different products. A weak Rh‐phosphine interaction was desirable to produce monoformyltricyclodecanes with fast reaction kinetics, whereas a strong Rh‐phosphine complex was required for the synthesis of diformyltricyclodecanes. In addition to the selectivity rule shown in the PPh₃ series, experiments with other ligands also demonstrated similar selectivity trends.     

Synthesis,characterization, cytotoxicity and computational studies of new phosphine‐ and carbodithioate‐based palladium(II) complexes

In quest of new metallo‐pharmaceuticals with enhanced anticancer activity, four new phosphine‐ and carbodithioate‐based Pd(II) complexes of the type [(R)CS₂Pd(PR₃)Cl] (where R = 4‐(2‐hydroxyethyl)piperazine ( 1 , 2 ), dibenzyl ( 3 , 4 ); PR₃ = diphenyl(p ‐tolyl)phosphine ( 1 , 3 ), tris(4‐tolyl)phosphine ( 2 , 4 )) were synthesized and characterized using elemental analysis, Fourier transform infrared and NMR (¹H, ¹³C and ³¹P) spectroscopies and single‐crystal X‐ray diffraction. The X‐ray diffraction data confirmed the pseudo square‐planar geometry ensuring bidentate coordination mode of carbodithioate ligands. Anticancer activity of the synthesized complexes and their ligands was assessed against human lung (A549), breast (MCF‐7) and prostate (PC3) carcinoma cells using MTT assay. All the tested compounds showed activity in micromolar range. In many cases, the cytotoxicity of the synthesized complexes was higher than or comparable to that of the standard drugs cisplatin and doxorubicin. Complex 3 emerged as the most promising compound with the lowest IC₅₀ values of 4.83, 3.72 and 5.11 μM for A549, MCF‐7 and PC3 carcinoma cell lines, respectively. DNA binding studies were also carried out using UV–visible spectroscopy. We extended our investigations to explore the mechanism of anticancer activity using in silico tools. Based on the mechanism of action of standard drugs used, extensive docking studies were carried out on the three different biomolecular targets.     

Synthesis,structure and antiproliferative activity of dinuclear ruthenium arene complexes with differently coordinated thiosemicarbazones

A series of di‐nuclear ruthenium arene complexes with TSC ligands ([(η⁶‐p‐cymene)Ru(N¹,S‐TSC)]₂Cl₂, A‐type, 1 and 2 ) and their corresponding analogues ([(η⁶‐p‐cymene)Ru(N²,S‐TSC)]₂Cl₂, B‐type, 3 and 4 ), in which TSCs act as different coordination mode, have been synthesized and structurally characterized by a variety of physical methods. The molecular structures of 1 , 3 and 4 were determined using single‐crystal X‐ray diffraction analysis. The Gibbs free energy of the two examples of the two types of complexes ( 1 and 3 ) and bonding order in their single‐crystals were discussed using density functional theory (DFT) calculations. The compounds were further evaluated for their in vitro antiproliferative activities against several cancerous and HEK‐293 T noncancerous cell lines, and the results indicate that B‐type complexes show stronger cytotoxicity than A‐type complexes. Furthermore, the interactions of the compounds with DNA were investigated by electrophoretic mobility spectrometry studies.     

Computational Study of the Palladium‐Catalyzed Carbonylative Synthesis of Aromatic Acid Chlorides: The Synergistic Effect of PtBu3 and CO on Reductive Elimination

We describe herein computational studies on the unusual ability of Pd(PtBu₃)₂ to catalyze formation of highly reactive acid chlorides from aryl halides and carbon monoxide. These show a synergistic role of carbon monoxide in concert with the large cone angle PtBu₃ that dramatically lowers the barrier to reductive elimination. The tertiary structure of the phosphine is found to be critical in allowing CO association and the generation of a high energy, four coordinate (CO)(PR₃)Pd(COAr)Cl intermediate. The stability of this complex, and the barrier to elimination, is highly dependent upon phosphine structure, with the tertiary steric bulk of PtBu₃ favoring product formation over other ligands. These data suggest that even difficult reductive eliminations can be rapid with CO association and ligand manipulation. This study also represents the first detailed exploration of all the steps involved in palladium‐catalyzed carbonylation reactions with simple phosphine ligands, including the key rate‐determining steps and palladium(0) catalyst resting state in carbonylations.     

Synthesis and characterization of triarylphosphine complexes of zinc(II) halides

Both 1:1 and 1:2 complexes are formed by zinc(II) halides and triarylphosphines unless electronic and/or steric factors intervene. Tri‐p‐chlorophosphine (a weaker base than PPh₃) forms only a 1:1 complex, whereas bulky tri‐(ortho‐substituted phenyl)phosphines do not react. The complexes ZnX₂PR₃ and ZnX₂(PR₃)₂ have been characterized by elemental analyses, conductance, far‐IR and (in a few cases) Raman spectral studies. The Zn–X and Zn–P stretching and Zn–X bending vibrational frequencies have been assigned in the complexes with a pseudo‐tetrahedral structure of C_2v symmetry. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of ligands based on naphthalene peri-substituted by Group 15 and 16 elements and their coordination chemistry

The synthetic aspects of chemistry of ligands based on naphthalene peri-substituted by heavier Group 15 elements (P, As, Sb, Bi) or Group 16 elements (S, Se, Te) are discussed in this review. An overview of coordination chemistry of these ligands is also given. In general, the area is dominated by bis(phosphines) Nap(PR₂)₂ and dithiolates Nap(SR)₂ (Nap = naphthalene-1,8-diyl), and most of the ligands act with chelating rigid C₃-backbones. Whilst all known bis(phosphine) complexes with Ni, Pd and Pt contain unmodified Nap(PR₂)₂ moieties, the reactions with a variety of metal carbonyls sometimes result in P–C bond cleavage within the ligand. A range of gold complexes with Nap(PR₂)₂ ligands have been investigated for material applications. NapP₂ ligands other than phosphines are also described, these include 1,2-diphosphaacenaphthenes, bis(phosphonites) and bis(phosphine oxides). Group 16 peri-dichalcogenolates used as ligands include NapS₂, NapSe₂ and NapSSe systems, but no tellurium congeners. Heterodentate ligands discussed in this review include those with NapPN, NapPO, NapPS, NapPF, NapPC and NapSN motifs. Ligands with heavier Group 15 donor atoms (NapAs₂, NapSb₂) are also reported. All possible oxides of the dithioles (monooxide to tetraoxide) as ligands are also discussed. Areas of interest for further work are outlined.     

Organoruthenium (II) complexes featuring pyrazole‐linked Schiff base ligands: Crystal structure,DNA/BSA interactions,cytotoxicity and molecular docking

Half‐sandwiched ruthenium (II) arene complexes with piano stool‐like geometry with the general formula [(p‐cymene)RuClL¹] and [(p‐cymene)RuClL²] [where L¹ = (Z)‐N′‐((1,3‐diphenyl‐1H‐pyrazol‐4‐yl)methylene)furan‐2‐carbohydrazide and L² = (Z)‐N′‐((1,3‐diphenyl‐1H‐pyrazol‐4‐yl)methylene)thiophene‐2‐carbohydrazide] were synthesized and characterized. The single crystal X‐ray data revealed that the complexes belong to the same crystal system (monoclinic) with octahedral geometry, where the ruthenium atom is surrounded by hydrazone ligand coordinated through ON atoms, one chloride labile co‐ligand and the remaining three coordination sites covered by an electron cloud of p‐cymene moiety. The interaction between the complexes and DNA/bovine serum albumin (BSA) was evaluated using absorption and emission titration methods showing intercalative modes of interaction. The DNA cleavage ability of the complexes was checked by agarose gel electrophoresis method exhibiting the destruction of DNA duplex arrangement. To understand the interaction between ruthenium complex and DNA/BSA molecule, molecular docking studies were performed. In vitro cytotoxicity of the complexes was examined by the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay on human lung cancer cell line, A549, and found that at lower IC₅₀, cell growth inhibition has occurred. Similarly, the IC₅₀ values of the complexes treated with cancerous cell lines have produced a significant amount of lactase dehydrogenase and nitrite content in the culture medium, which were evaluated as apoptosis‐inducing factors, suggesting that the ruthenium (II) arene hydrazone complexes with pyrazole ligands have promising anticancer activities.     

Efficient Electronic Communication of Two Ruthenium Centers through a Rigid Ditopic N‐Heterocyclic Carbene Linker

A ditopic benzobis(carbene) ligand precursor was prepared that contained a chelating pyridyl moiety to ensure co‐planarity of the carbene ligand and the coordination plane of a bound octahedral metal center. Bimetallic ruthenium complexes comprising this ditopic ligand [L₄Ru‐C,N‐bbi‐C,N‐RuL₄] were obtained by a transmetalation methodology (C,N‐bbi‐C,N=benzobis(N‐pyridyl‐N′‐methyl‐imidazolylidene). The two metal centers are electronically decoupled when the ruthenium is in a pseudotetrahedral geometry imparted by a cymene spectator ligand (L₄=[(cym)Cl]). Ligand exchange of the Cl^?/cymene ligands for two bipyridine or four MeCN ligands induced a change of the coordination geometry to octahedral. As a consequence, the ruthenium centers, separated through space by more than 10 Å, become electronically coupled, which is evidenced by two distinctly different metal‐centered oxidation processes that are separated by 134 mV (L₄=[(bpy)₂]; bpy=2,2′‐bipyridine) and 244 mV (L₄=[(MeCN)₄]), respectively. Hush analysis of the intervalence charge‐transfer bands in the mixed‐valent species indicates substantial valence delocalization in both complexes (delocalization parameter Γ=0.41 and 0.37 in the bpy and MeCN complexes, respectively). Spectroelectrochemical measurements further indicated that the mixed‐valent Ru^II/Ru^III species and the fully oxidized Ru^III/Ru^III complexes gradually decompose when bound to MeCN ligands, whereas the bpy spectators significantly enhance the stability. These results demonstrate the efficiency of carbenes and, in particular, of the bbi ligand scaffold for mediating electron transfer and for the fabrication of molecular redox switches. Moreover, the relevance of spectator ligands is emphasized for tailoring the degree of electronic communication through the benzobis(carbene) linker.     

Synthesis,structural and chemosensitivity studies of arene d6 metal complexes having N‐phenyl‐N´‐(pyridyl/pyrimidyl)thiourea derivatives

The d⁶ metal complexes of thiourea derivatives were synthesized to investigate its cytotoxicity. Treatment of various N‐phenyl‐N´ pyridyl/pyrimidyl thiourea ligands with half‐sandwich d⁶ metal precursors yielded a series of cationic complexes. Reactions of ligand (L1‐L3) with [(p‐cymene)RuCl₂]₂ and [Cp*MCl₂]₂ (M = Rh/Ir) led to the formation of a series of cationic complexes bearing general formula [(arene)M(L1)к²_(N,S)Cl]⁺, [(arene)M(L2)к²_(N,S)Cl]⁺ and [(arene)M(L3)к²_(N,S)Cl]⁺ [arene = p‐cymene, M = Ru ( 1 , 4 , 7 ); Cp*, M = Rh ( 2 , 5 , 8 ); Cp*, Ir ( 3 , 6 , 9 )]. These compounds were isolated as their chloride salts. X‐ray crystallographic studies of the complexes revealed the coordination of the ligands to the metal in a bidentate chelating N,S‐ manner. Further the cytotoxicity studies of the thiourea derivatives and its complexes evaluated against HCT‐116 (human colorectal cancer), MIA‐PaCa‐2 (human pancreatic cancer) and ARPE‐19 (non‐cancer retinal epithelium) cancer cell lines showed that the thiourea ligands displayed no activity. Upon complexation however, the metal compounds possesses cytotoxicity and whilst potency is less than cisplatin, several complexes exhibited greater selectivity for HCT‐116 or MIA‐PaCa‐2 cells compared to ARPE‐19 cells than cisplatin in vitro. Rhodium complexes of thiourea derivatives were found to be more potent as compared to ruthenium and iridium complexes.     

Energy-dependent Electrospray Ionisation Mass Spectrometry of Carbonyl Clusters

The electrospray ionisation mass spectra (EDESI-MS) of Ru₆C(CO)₁₆(PPh₃) and Ir₄(CO)₁₁(PR₃) (PR₃=PPh₃, P(p-C₆H₄OMe)₃, P(p-C₆H₄NMe₂)₃, P(p-C₆H₄Cl)₃, P(OPh)₃, P(OMe)₃, PO₃C₅H₉) are described and the relative importance of carbonyl loss versus phosphine loss as a fragmentation pathway is assessed. Qualitatively, the phosphine ligands bind more strongly to Ir₄(CO)₁₁ clusters than to Ru₆C(CO)₁₆. The influence on the collision cell pressure on MS/MS spectra of transition metal carbonyl cluster anions is also explored showing that a greater, simultaneous, distribution of fragment ions is produced as the collision cell pressure is increased.Dedicated to Prof. Brian F. G. Johnson on the occasion of his retirement.     

Template‐Controlled Assembly of Ditopic Catechol Phosphines: A Strategy for the Generation of Complexes of Bidentate Phosphines with Different Bite Angles

A rational approach to the synthesis of heterobi‐ or ‐trimetallic complexes based upon self‐assembly of a flexible ditopic catechol‐phosphine ligand with [(cod)PdCl₂] and simple metal halides such as GaCl₃, BiCl₃, SnCl₄, or ZrCl₄ is described. All products were characterized by spectroscopic and analytical data and single‐crystal X‐ray diffraction studies. The molecular structures can be described in terms of cis‐configured palladium complexes with supramolecular bisphosphine ligands that are formed by the assembly of two phosphine catecholate fragments on a main group/transition metal template. Of particular interest are the distinct decreases in P‐Pd‐P bite angles and P???P distances between the ligating atoms with increasing covalent radii of the templates. The range of these variations is of a magnitude similar to that of the geometrical changes in known families of complexes containing molecular bidentate ligands. Solution NMR studies give further evidence that in several cases the μ₂‐bridging coordination of two of the catechol oxygen atoms in the template complexes is broken under the influence of donor solvents, thus allowing the supramolecular ligand to be switched between tetradentate ‐O₂P₂ and bidentate ‐P₂ coordination modes.     

Enhanced Anion Binding from Unusual Coordination Modes of Bis(thiourea) Ligands in Platinum Group Metal Complexes

Treatment of a range of bis(thiourea) ligands with inert organometallic transition‐metal ions gives a number of novel complexes that exhibit unusual ligand binding modes and significantly enhanced anion binding ability. The ruthenium(II) complex [Ru(η⁶‐p‐cymene)(κS,S′,N‐ L³ ?H)]⁺ ( 2 b ) possesses juxtaposed four‐ and seven‐membered chelate rings and binds anions as both 1:1 and 2:1 host guest complexes. The pyridyl bis(thiourea) complex [Ru(η⁶‐p‐cymeme)(κS,S′,N_py‐ L⁴ )]²⁺ ( 4 ) binds anions in both 1:1 and 1:2 species, whereas the free ligand is ineffective because of intramolecular NH???N hydrogen bonding. Novel palladium(II) complexes with nine‐ and ten‐membered chelate rings are also reported.     

Zur Reaktivität von alkylthioverbrückten 44‐CVE‐triangularen Platinclustern: Umsetzungen mit bidentaten Phosphanliganden

On the Reactivity of Alkylthio Bridged 44 CVE Triangular Platinum Clusters: Reactions with Bidentate Phosphine Ligands The 44 cve (cluster valence electrons) triangular platinum clusters [{Pt(PR₃)}₃(μ‐SMe)₃]Cl (PR₃ = PPh₃, 2a ; P(4‐FC₆H₄)₃, 2b ; P(n‐Bu)₃, 2c ) were found to react with PPh₂CH₂PPh₂ (dppm) in a degradation reaction yielding dinuclear platinum(I) complexes [{Pt(PR₃)}₂(μ‐SMe)(μ‐dppm)]Cl (PR₃ = PPh₃, 3a ; P(4‐FC₆H₄)₃, 3b ; P(n‐Bu)₃; 3e ) and the platinum(II) complex [Pt(SMe)₂(dppm)] ( 4 ), whereas the addition of PPh₂CH₂CH₂PPh₂ (dppe) to cluster 2a afforded a mixture of degradation products, among others the complexes [Pt(dppe)₂] and [Pt(dppe)₂]Cl₂. On the other hand, the treatment of cluster 2a with PPh₂CH₂CH₂CH₂PPh₂ (dppp) ended up in the formation of the cationic complex [{Pt(dppp)}₂(μ‐SMe)₂]Cl₂ ( 5 ). Furthermore, the terminal PPh₃ ligands in complex 3a proved to be subject to substitution by the stronger donating monodentate phosphine ligands PMePh₂ and PMe₂Ph yielding the analogous complexes [{Pt(PR₃)}₂(μ‐SMe)(μ‐dppm)]Cl (PR₃ = PMePh₂, 3c ; PMe₂Ph, 3d ). NMR investigations on complexes 3 showed an inverse correlation of Tolmans electronic parameter ν with the coupling constants ¹J(Pt,P) and ¹J(Pt,Pt). All compounds were fully characterized by means of NMR and IR spectroscopy. X‐ray diffraction analyses were performed for the complexes [{Pt{P(4‐FC₆H₄)₃}}₂(μ‐SMe)(μ‐dppm)]Cl ( 3b ), [Pt(SMe)₂(dppm)] ( 4 ), and [{Pt(dppp)}₂(μ‐SMe)₂]Cl₂ ( 5 ).