Controlled/living polymerization of MMA promoted by heterogeneous initiation system (EPN‐X–CuX–bpy)

The polymerization of methyl methacrylate (MMA) promoted by heterogeneous initiation system (ethyl‐2‐halopropionate (EPN‐X)–CuX–2,2′‐bipyridyl (bpy), where X = Br or Cl) is studied in detail. The results show that ethyl‐2‐bromopropionate (EPN‐Br) is an efficient initiator as expected, and that CuCl–bpy, instead of CuBr–bpy, is a better catalyst for the controlled polymerization of MMA. The solvents with a high value of dielectric constant (ε) will lead to fast initiation and narrow molecular weight distribution (MWD). As a result, the controlled, living polymerization of MMA with EPN‐Br–CuCl–bpy can be got in ethyl acetate (EAc) at 100°C and in acetonitrile at 80°C. All results suggest that the initiation reaction is a controlling step in the controlled polymerization of MMA. The relationship between the UV spectra of CuCl–bpy and the performances of the polymerization in EAc or acetonitrile suggest that the formation of bis‐bpy complex, [Cubpy₂]X⁻, will lead to fast initiation and good control of the polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1255–1263, 1999     

Ester–amide exchange in blends of liquid‐crystalline copolyester and polyamide 6

The kinetics of the ester–amide exchange in solution blends of the random liquid‐crystalline polyester copoly(oxybenzoate‐terephthalate) (P64) and polyamide 6 (PA6) were studied with carbon nuclear magnetic resonance. With second‐order reversible reactions assumed, the activation energy of the ester–amide interchange in 30/70, 50/50, and 70/30 P64/PA6 blends were all about 24.0 kcal/mol. The pre‐exponential factors for the ester–amide exchange in 30/70, 50/50, and 70/30 P64/PA6 blends were 2.01 × 10¹¹, 2.59 × 10¹⁰, and 2.74 × 10¹² min⁻¹, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2124–2135, 2000     

Kinetics and products of propargyl (C3H3) radical self‐reactions and propargyl‐methyl cross‐combination reactions

Propargyl (HCC CH₂) and methyl radicals were produced through the 193‐nm excimer laser photolysis of mixtures of C₃H₃Cl/He and CH₃N₂CH₃/He, respectively. Gas chromatographic and mass spectrometric (GC/MS) product analyses were employed to characterize and quantify the major reaction products. The rate constants for propargyl radical self‐reactions and propargyl‐methyl cross‐combination reactions were determined through kinetic modeling and comparative rate determination methods. The major products of the propargyl radical combination reaction, at room temperature and total pressure of about 6.7 kPa (50 Torr) consisted of three C₆H₆ isomers with 1,5‐hexadiyne(CHC CH₂ CH₂ CCH, about 60%); 1,2‐hexadiene‐5yne (CH₂CC CH₂ CCH, about 25%); and a third isomer of C₆H₆ (∼15%), which has not yet been, with certainty, identified as being the major products. The rate constant determination in the propargyl‐methyl mixed radical system yielded a value of (4.0 ± 0.4) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ for propargyl radical combination reactions and a rate constant of (1.5 ± 0.3) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹ for propargyl‐methyl cross‐combination reactions. The products of the methyl‐propargyl cross‐combination reactions were two isomers of C₄H₆, 1‐butyne (about 60%) and 1,2‐butadiene (about 40%). © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 118–124, 2000     

Determination of propagation rate coefficients for an α‐substituted acrylic ester: Pulsed laser polymerization of dimethyl itaconate

Pulsed laser polymerization experiments have been performed on the bulk polymerization of dimethyl itaconate over the temperature range 20–50 °C. The activation energy and frequency factor were calculated as 24.9 kJ/mol⁻¹ and 2.15 × 10⁵ L/mol⁻¹s⁻¹, respectively. The activation energy is comparable with the methacrylate series of monomers. The frequency factor is relatively small and reflects steric hindrance in the transition state caused by the bulky 1,1, disubstitution in the monomer (and consequently the radical). The Mark–Houwink–Kuhn–Sakurada constants were also determined for poly(dimethyl itaconate) in tetrahydrofuran, these are reported as 46 × 10⁻⁵ dL/g (K) and 0.51 (α). The influence of penultimate units (γ‐substituents) on homopropagation reactions is discussed particularly for polymerizations leading to significant 1,3 interactions in the resultant polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2192–2200, 2000     

Effects of ethylene polymerization conditions on the activity of SiO2-supported zirconocene and on polymer properties

The effects of polymerization conditions were evaluated on the production of polyethylene by silica-supported (n-BuCp)₂ZrCl₂ grafted under optimized conditions and cocatalyzed by methylaluminoxane (MAO). The Al : Zr molar ratio, reaction temperature, monomer pressure, and the age and concentration of the catalyst were systematically varied. Most reactions were performed in toluene. Hexane, with the addition of triisobutilaluminum (TIBA) to MAO, was also tested as a polymerization solvent for both homogeneous and heterogeneous catalyst systems. Polymerization reactions in hexane showed their highest activities with MAO : TIBA ratios of 3 : 1 and 1 : 1 for the homogeneous and supported systems, respectively. Catalyst activity increased continuously as Al : Zr molar ratios increased from 0 to 2000, and remained constant up to 5000. The highest activity was observed at 333 K. High monomer pressures (≈ 4 atm) appeared to stabilize active species during polymerization, producing polyethylenes with high molecular weight (≈ 3 × 10⁵ g mol⁻¹). Catalyst concentration had no significant effect on polymerization activity or polymer properties. Catalyst aging under inert atmosphere was evaluated over 6 months; a pronounced reduction in catalyst activity [from 20 to 13 × 10⁵ g PE (mol Zr h)⁻¹] was observed only after the first two days following preparation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1987–1996, 1999     

Synthesis of ladder polymers containing polydiacetylene backbones connected with methylene chains and their optical properties

The polymers consisting of polydiacetylene (PDA) backbones were obtained from the novel monomer derivatives, R CC CC R′ CC CC R [where R =  (CH₂)₄OCONHCH₂COOC₄H₉, R′ =  (CH₂)_n ; n = 2, 4, 8] [4BCMU4A(n)], in which linear methylene chain is sandwiched between two diacetylene moieties by solid-state 1,4-addition reaction. The polymerization process was investigated in detail by using spectroscopic techniques such as solid-state ¹³C-NMR, visible absorption, and IR absorption spectra. It was estimated that the polymerization of 4BCMU4A(8) and 4BCMU4A(4) takes place by two consecutive 1,4-addition reactions to form two PDA backbones, which constitute the two poles of the respective ladders. The bridging methylene chain length in the monomer was found to play a vital role as far as the polymerization process is concerned. Thus, the monomers with eight or four methylene units could form the ladder–PDAs by a two-step process, whereas the monomer containing two methylene units could only undergo one-step of 1,4-addition reaction. Further, it was found that the crystallinity of the polymers depends on the methylene chain length in the monomers, 4BCMU4A(8) being the most crystalline of all. These structural features strongly affect their absorption spectra. The third-order nonlinear optical susceptibilities (χ⁽³⁾) for these polymers were measured using third-harmonic generation method. The largest χ⁽³⁾ value obtained was 3.4 × 10⁻¹¹ esu for the poly[4BCMU4A(8)] thin film in resonant region. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3537–3548, 1999     

Electrochemically mediated atom transfer radical polymerization with dithiocarbamates as alkyl pseudohalides

Electrochemically mediated atom transfer radical polymerizations (ATRPs) provide well‐defined polymers with designed dispersity as well as under external temporal and spatial control. In this study, 1‐cyano‐1‐methylethyl diethyldithiocarbamate, typically used as chain‐transfer agent (CTA) in reversible addition–fragmentation chain transfer (RAFT) polymerization, was electrochemically activated by the ATRP catalyst Cu^I/2,2′‐bipyridine (bpy) to control the polymerization of methyl methacrylate. Mechanistic study showed that this polymerization was mainly controlled by the ATRP equilibrium. The effect of applied potential, catalyst counterion, catalyst concentration, and targeted degree of polymerization were investigated. The chain‐end functionality was preserved as demonstrated by chain extension of poly(methyl methacrylate) with n‐butyl methacrylate and styrene. This electrochemical ATRP procedure confirms that RAFT CTAs can be activated by an electrochemical stimulus. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 376–381     

Multi-C−C/C−N-Coupled Light-Emitting Aliphatic Terpolymers: N−H-Functionalized Fluorophore Monomers and High-Performance Applications

To circumvent costly fluorescent labeling, five nonconventional, multifunctional, intrinsically fluorescent aliphatic terpolymers ( 1 – 5 ) have been synthesized by C−C/C−N-coupled, solution polymerization of two non-emissive monomers with protrusions of fluorophore monomers generated in situ. These scalable terpolymers were suitable for sensing and high-performance exclusion of Cu^II, logic function, and bioimaging. The structures of the terpolymers, in situ attachment of fluorescent monomers, aggregation-induced enhanced emission, bioimaging ability, and super adsorption were investigated by ¹H and ¹³C NMR, EPR, FTIR, X-ray photoelectron, UV/Vis, and atomic absorption spectroscopy, thermogravimetric analysis, high-resolution transmission electron microscopy, dynamic light scattering, solid-state fluorescence, fluorescence imaging, and fluorescence lifetime measurements, as well as by isotherm, kinetics, and thermodynamic studies. The geometries and electronic structures of the fluorophores and the absorption and emission properties of the terpolymers were examined by DFT, time-dependent DFT, and natural transition orbital analyses. For 1 , 2 , and 5 , the limits of detection were determined to be 1.03×10⁻⁷, 1.65×10⁻⁷, and 1.77×10⁻⁷ m , respectively, and the maximum adsorption capacities are 1575.21, 1433.70, and 1472.21 mg g⁻¹, respectively.     

SET–LRP of N‐isopropylacrylamide in the presence of chain transfer agent

In this study, single electron transfer‐living radical polymerization (SET–LRP) of N‐isopropylacrylamide (NIPAM) in the presence of 2‐mercaptoethylamine chain transfer agent (CTA) was carried out by Cu(0) generated in situ from the disproportionation of CuBr/2,2′‐bipyridine (2,2′‐bpy) in N,N‐dimethylformamide (DMF) at 90 °C. Analysis of polymerization kinetics in the presence of CTA showed that the premature termination of growing polymer chains leads to retardation. The apparent rate constant of polymerization (k) decreased from 4.49 × 10^?4 to 2.59 × 10^?4 min^?1 with increasing CTA concentration. The initiator efficiency (I_eff) and the chain transfer constant (C_s) were found to be 0.524 and 0.286, respectively. The molecular weights of poly(N‐isopropylacrylamide) [poly(NIPAM)] produced were significantly higher than the predicted values, and the polydispersities were less than 1.22. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Simultaneous Determination of Procaspase Activating Compound 1 and Permeability Markers in Intestinal Perfusion Samples and Application to a Rat Intestinal Absorption Study

A sensitive and simple HPLC method for simultaneous determination of PAC-1 (first procaspase-activating compound), phenol red, and permeability markers (carbamazepine and furosemide) in perfusion samples was developed and validated to assess intestinal absorption of PAC-1 using single-pass intestinal perfusion technique (SPIP) in rats. The chromatographic separation was carried out on a Kromasil C₁₈ column (150 mm × 4.6 mm, 5 μm) with acetonitrile–methanol–30 mmol L⁻¹ phosphate buffer (pH 3.0, 25:10:65, v/v/v) as mobile phase at a flow rate of 1.0 mL min⁻¹, and the wavelength of the UV detector was set at 281 nm. The calibration curves were linear in the ranges of 2.40–48.0 μg mL⁻¹ for PAC-1; 3.60–72.0 μg mL⁻¹ for carbamazepine; 3.20–64.0 μg mL⁻¹ for furosemide, and 4.80–96.0 μg mL⁻¹ for phenol red (r > 0.999). Both the intra- and inter-day precisions (RSD%) of all analytes were less than 6.8 % at three concentration levels, while accuracy ranged from 95.4 to 104.5 %. Data obtained in all method validation studies indicated that the method was suitable for the intended purpose. The effective permeability values (P _eff) considering water flux with the help of non-permeable marker phenol red was calculated to be 0.42 × 10⁻⁴, 0.62 × 10⁻⁴, 0.32 × 10⁻⁴ cm s⁻¹ for PAC-1; 0.72 × 10⁻⁴, 0.77 × 10⁻⁴, 0.52 × 10⁻⁴ cm s⁻¹ for carbamazepine; 0.20 × 10⁻⁴, 0.16 × 10⁻⁴, 0.12 × 10⁻⁴ cm s⁻¹ for furosemide in duodenum, jejunum and ileum, respectively. The P _eff value can be increased by co-perfusion with verapamil, indicating that absorption of PAC-1 is efficiently transported by P-glycoprotein (P-gp) in the gut wall.

     

Poly(styrene‐b‐isobutylene) multiarm star‐block copolymers

Multiarm star‐branched polymers based on poly(styrene‐b‐isobutylene) (PS‐PIB) block copolymer arms were synthesized under controlled/living cationic polymerization conditions using the 2‐chloro‐2‐propylbenzene (CCl)/TiCl₄/pyridine (Py) initiating system and divinylbenzene (DVB) as gel‐core‐forming comonomer. To optimize the timing of isobutylene (IB) addition to living PS⊕, the kinetics of styrene (St) polymerization at −80°C were measured in both 60 : 40 (v : v) methyl cyclohexane (MCHx) : MeCl and 60 : 40 hexane : MeCl cosolvents. For either cosolvent system, it was found that the polymerizations followed first‐order kinetics with respect to the monomer and the number of actively growing chains remained invariant. The rate of polymerization was slower in MCHx : MeCl (k_app = 2.5 × 10⁻³ s⁻¹) compared with hexane : MeCl (k_app = 5.6 × 10⁻³ s⁻¹) ([CCl]_o = [TiCl₄]/15 = 3.64 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M). Intermolecular alkylation reactions were observed at [St]_o = 0.93M but could be suppressed by avoiding very high St conversion and by setting [St]_o ≤ 0.35M. For St polymerization, k_app = 1.1 × 10⁻³ s⁻¹ ([CCl]_o = [TiCl₄]/15 = 1.82 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M); this was significantly higher than that observed for IB polymerization (k_app = 3.0 × 10⁻⁴ s⁻¹; [CCl]_o = [Py] = [TiCl₄]/15 = 1.86 × 10⁻³M; [IB]_o = 1.0M). Blocking efficiencies were higher in hexane : MeCl compared with MCHx : MeCl cosolvent system. Star formation was faster with PS‐PIB arms compared with PIB homopolymer arms under similar conditions. Using [DVB] = 5.6 × 10⁻²M = 10 times chain end concentration, 92% of PS‐PIB arms (M_n,PS = 2600 and M_n,PIB = 13,400 g/mol) were linked within 1 h at −80°C with negligible star–star coupling. It was difficult to achieve complete linking of all the arms prior to the onset of star–star coupling. Apparently, the presence of the St block allows the PS‐PIB block copolymer arms to be incorporated into growing star polymers by an additional mechanism, namely, electrophilic aromatic substitution (EAS), which leads to increased rates of star formation and greater tendency toward star–star coupling. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1629–1641, 1999     

Styrene polymerization with rare earth catalysts using a magnesium alkyl cocatalyst

A new highly active rare earth coordination catalyst composed of rare earth phosphonate, di-n-butylmagnesium (MgBu), and hexamethyl phosphoramide (HMPA) for the polymerization of styrene has been developed for the first time. High molecular weight polystyrene (M̄_ν = 50–70 × 10⁴) in 100% conversion could be prepared at following conditions: [Nd] = 6–8 × 10⁻⁴ mol/L, [St] = 3.0 mol/L, Mg/Nd = 11, and HMPA/Mg = 1–1.5 (molar ratio). The catalytic activity of this new catalyst is 3530 g PSt/g Nd. Kinetics study shows that the polymerization rate is of first order with respect to both monomer concentration and catalyst concentration, and activation energy of the polymerization is 40.1 kJ/mol. © 1996 John Wiley & Sons, Inc.     

Kinetic study of azidopentaammine cobalt(III) complex as photoinitiator and termination agent of N‐vinylpyrrolidone radical polymerization

N‐Vinylpyrrolidone polymerization photoinitiated at 365 and 546 nm by azidopentaammine cobalt(III) {[Co(NH₃)₅N₃]²⁺} was investigated at room temperature in an argon atmosphere. By excitation into the ligand to metal charge transfer (LMCT), the cobalt complex showed an efficient photoredox process leading to the formation of a cobalt(II) and an azide radical (N, Φ_photoredox = 0.24). The same process was found to occur by excitation into the ligand field band with a low but not negligible quantum yield (Φ_photoredox = 0.016). Two different domains were clearly present when the plot of the rate of polymerization as a function of the cobalt(III) complex was studied; for [Co(III)] < 2.0 × 10⁻⁴ M, the termination step mainly involved a mutual annihilation of growing radicals whereas an oxidative termination was present in the range of 2.0 × 10⁻⁴ M < [Co(III)] < 1.0 × 10⁻³ M. Within the former domain the rate of polymerization (R_p ) varied with the first power of the monomer concentration and with the square root of the absorbed light intensity while for the latter domain the R_p was proportional to the monomer concentration and absorbed light intensity. Further investigations using the viscosity‐average molecular weight data allowed us to corroborate the proposed polymerization mechanism. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3997–4005, 2000     

Cyclopolymerization of 3-phenyl[5]ferrocenophane-1,5-dimethylene: Synthesis and electronic properties of a polyferrocenophane

Radical cyclopolymerization of 3-phenyl[5]ferrocenophane-1,5-dimethylene ( 2 ) and copolymerization with styrene gave polymers ( 3 and 4 ) with [3]ferrocenophane moieties pendant to the backbone. Cyclic voltammetry (CV) on polymer 3 in CH₂Cl₂ showed two oxidation waves at −0.13 and +0.05 V (versus ferrocene/ferrocenium) and CV on copolymer 4 showed one oxidation potential at −0.03 V. CV on 3 in dimethylacetamide showed only one oxidation potential at −0.10 V. Near-IR spectroscopy of partially oxidized 3 showed a broad intervalence band at ca. 2000 nm, indicative of low-energy barriers to electron hopping. Conductivity measurements on 3 and poly(vinylferrocene) (PVFc) oxidatively doped with iodine vapors under an argon atmosphere showed a maximum conductivity ca. 5 × 10⁻⁵ S/cm before the samples cracked, while 4 exhibited a maximum conductivity of 1.6 × 10⁻⁶ S/cm. On iodine doping under ambient conditions, polymers 3 , 4 , and PVFc showed maximum conductivities of 7.6 × 10⁻⁴, 9.5 × 10⁻⁵, and 5.5 × 10⁻⁵ S/cm, respectively. Conductivity measurement were also performed on samples of 3 ⁺BF₄⁻ with oxidation levels ranging from 8 to 56%. Conductivities of these samples ranged from ca. 10⁻¹⁰ to 10⁻⁹ S/cm under vacuum and ca. 10⁻⁶ S/cm under ambient conditions, indicating that atmospheric moisture has a strong effect on the conductivity. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3365–3376, 1997     

Kinetics of OH and Cl reactions with a series of aldehydes

The rate constants for the reactions of the OH radicals with a series of aldehydes have been measured in the temperature range 243–372 K, using the pulsed laser photolysis‐pulsed laser induced fluorescence method. The obtained data for propanaldehyde, iso‐butyraldehyde, tert‐butyraldehyde, and n‐pentaldehyde were as follows (in cm³ molecule⁻¹ s⁻¹): (a) in the Arrhenius form: (5.3 ± 0.5) × 10⁻¹² exp[(405 ± 30)/T], (7.3 ± 1.9) × 10⁻¹² exp[(390 ± 78)/T], (4.7 ± 0.8) × 10⁻¹² exp[(564 ± 52)/T], and (9.9 ± 1.9) × 10⁻¹² exp[(306 ± 56)/T]; (b) at 298 K: (2.0 ± 0.3) × 10⁻¹¹, (2.6 ± 0.4) × 10⁻¹¹, (2.7 ± 0.4) × 10⁻¹¹, and (2.8 ± 0.2) × 10⁻¹¹, respectively. In addition, using the relative rate method and alkanes as the reference compounds, the room‐temperature rate constants have been measured for the reactions of chlorine atoms with propanaldehyde, iso‐butyraldehyde, tert‐butyraldehyde, n‐pentaldehyde, acrolein, and crotonaldehyde. The obtained values were (in cm³ molecule⁻¹ s⁻¹): (1.4 ± 0.3) × 10⁻¹⁰, (1.7 ± 0.3)10⁻¹⁰, (1.6 ± 0.3) × 10⁻¹⁰, (2.6 ± 0.3) × 10⁻¹⁰, (2.2 ± 0.3) × 10⁻¹⁰, and (2.6 ± 0.3) × 10⁻¹⁰, respectively. The results are presented and discussed in terms of structure‐reactivity relationships and atmospheric importance. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 676–685, 2000     

Spectroscopic Study on Interaction of Lomefloxacin with Human Serum Albumin in the Presence of Copper Ion

The interaction of lomefloxacin （LMF） with human serum albumin （HSA） in the presence of copper ions in a physiological medium and its thermodynamic characteristics were investigated by multi-spectroscopy. The experimental results showed that both LMF and LMF-Cu^2＋ could quench the fluorescence of HSA with a static quenching mechanism, indicating that LMF or LMF-Cu^2＋ could react with HSA. The apparent binding constants/numbers of binding sites were estimated as 4.924± 105 Lomol 1/1.473 for LMF-HSA, 8.990± 104 L·mol^-1/1.785 for LMF- Cu^2＋-HSA, 1.10± 105 L·mol^-1/1.21 for LMF-Cu^2＋ and 7.30± 102 L·mol^-1/0.82 for HSA-Cu^2＋, respectively. AH and AS for LMF-HSA system were calculated to be --2.189 kJ·mol^-1 and 61.25 J·mol^-1·K^-1, while those for LMF-Cu^2＋-HSA system were -7.401 kJ·mol^-1 and 47.63 J·mol^-1·K^-1 Although the values of AH and AS in these two systems were different, the treads were similar, which indicated that electrostatic interactions in these two systems played a major role. According to Forster theory, the distances were given as 5.006 nm for HSA-LMF and 4.709 nm for HSA-LMF-Cu^2＋. Synchronous fluorescence and circular dichroism spectra confirmed further that the conformations of human serum albumin before and after interacting with LMF or LMF-Cu^2＋ were different. All the results revealed that copper ions promoted the interaction of lomefloxacin with human serum albumin.     

New chemosensory materials based on disubstituted polyacetylene with strong green fluorescence

A new imidazole‐containing disubstituted polyacetylene ( P1 ) with strong green fluorescence was successfully prepared through polymer reaction, which was nearly impossible to be obtained from the direct polymerization of its corresponding monomer. The polymer was soluble in common organic solvents, and its strong green fluorescence could be quenched completely by the Cu²⁺ and Co²⁺ ions, at the concentrations as low as 1.33 and 1.67 × 10⁻⁵ mol/L (0.85 and 0.92 ppm), respectively. Because of the high stability of the complex formed by cyanide and copper ions, the quenched green fluorescence of P1 by copper ions could be turned on upon the addition of trace cyanide (as low as 2.70 × 10⁻⁵ mol/L, 0.70 ppm), making P1 a new sensitive cyanide chemosensor. The results thus provided a new opportunity to develop anion chemosensors based on good cation chemosensors. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8070–8080, 2008     

Ring-opening polymerization of cyclic carbonates by alcohol–acid catalyst

Ring-opening reactions of 1,3-dioxepan-2-one ( 1 ) and 1,3-dioxan- 2 -one (2) with several alcohols were examined. The reactions proceeded without trifluoroacetic acid (TFA) in low conversions, while they proceeded smoothly with TFA to afford the ring-opened adducts and oligomers. Ring-opening polymerizations of 1 and 2 were also carried out by alcohol–acid catalysts to afford the corresponding polycarbonates (M _n = 2500−6800). The molecular weights increased with increase of the conversions of 1 and 2. The observed polymerization rates of 1 and 2 were determined as 24.4 × 10⁻⁶ and 0.8 × 10⁻⁶ s⁻¹, respectively. Mechanistic aspects were studied by NMR spectroscopy. The methylene protons α and β to the carbonate moieties shifted to lower fields in 0.06–0.11 ppm in the ¹H-NMR spectra by the addition of TFA. Downfield shifts of the carbonyl carbon signals of 1 and 2 were observed in 3.94–4.15 ppm in the ¹³C-NMR spectra. These results strongly suggest that the cyclic carbonates are activated by TFA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2463–2471, 1998     

The synthesis of poly(phenylacetylene)s with bulky chiral silyl groups and the thermal stability of their helical conformation

The polymerization of (−)‐p‐[(tert‐butylmethylphenyl)silyl]phenylacetylene (t‐BuMePhSi*PA) and (+)‐p‐[{methyl(α‐naphthyl)phenyl}silyl]phenylacetylene (MeNpPhSi*PA) with the [(nbd)RhCl]₂ Et₃N catalyst yielded polymers with very high molecular weights over 2 × 10⁶ in high yields. The optical rotations of the formed poly(t‐BuMePhSi*PA) and poly(MeNpPhSi*PA) were as high as −356 and −150° (c = 0.11 g/dL in CHCl₃), respectively. The circular dichroism (CD) spectrum of poly(t‐BuMePhSi*PA) in CHCl₃ exhibited very large molar ellipticities ([θ]) in the UV region: [θ]_max = 9.2 × 10⁴ ° · cm² · dmol⁻¹ at 330 nm and −8.0 × 10⁴ ° · cm² · dmol⁻¹ at 370 nm. The [θ]_max values of poly(MeNpPhSi*PA) were also fairly large: [θ]_max = 7.1 × 10⁴ ° · cm² · dmol⁻¹ at 330 nm and −5.3 × 10⁴ ° · cm² · dmol⁻¹ at 370 nm. The optical rotations of poly(t‐BuMePhSi*PA) and poly(MeNpPhSi*PA), measured in tetrahydrofuran, chloroform, and toluene solutions, were hardly dependent on temperature in the range 22–65 °C. The CD effects of these polymers hardly changed in the temperature range 28–80 °C, either. These results indicate that the helical structures of these polymers are thermally appreciably stable. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 71–77, 2001     

Kinetic and ESR studies on radical polymerization of methyl methacrylate in the presence of fullerene

The effect of fullerene (C₆₀) on the radical polymerization of methyl methacrylate (MMA) in benzene was studied kinetically and by means of ESR, where dimethyl 2,2′-azobis(isobutyrate) (MAIB) was used as initiator. The polymerization rate (R_p) and the molecular weight of resulting poly(MMA) decreased with increasing C₆₀ concentration ((0–2.11) × 10⁻⁴ mol/L). The molecular weight of polymer tended to increase with time at higher C₆₀ concentrations. R_p at 50°C in the presence of C₆₀ (7.0 × 10⁻⁵ mol/L) was expressed by R_p = k[MAIB]^0.5[MMA]^1.25. The overall activation energy of polymerization at 7.0 × 10⁻⁵ mol/L of C₆₀ concentration was calculated to be 23.2 kcal/mol. Persistent fullerene radicals were observed by ESR in the polymerization system. The concentration of fullerene radicals was found to increase linearly with time and then be saturated. The rate of fullerene radical formation increased with MAIB concentration. Thermal polymerization of styrene (St) in the presence of resulting poly(MMA) seemed to yield a starlike copolymer carrying poly(MMA) and poly(St) arms. The results (r₁ = 0.53, r₂ = 0.56) of copolymerization of MMA and St with MAIB at 60°C in the presence of C₆₀ (7.15 × 10⁻⁵ mol/L) were similar to those (r₁ = 0.46, r₂ = 0.52) in the absence of C₆₀. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2905–2912, 1998