Kinetic evidence of a “matrix effect” in the bulk polymerization of acrylonitrile

The kinetics of the γ-ray-initiated polymerization of acrylonitrile in bulk are reexamined in broad ranges of temperatures and radiation dose rates. The discussion of the results coupled with an analysis of earlier data indicate that the polymerization of acrylonitrile proceeds by different mechanisms depending on the reaction temperature. Above 60°C the precipitated growing chains recombine readily; therefore, the autoaccelerated conversion curves cannot be accounted for by an “occlusion effect.” It is suggested that autoacceleration is caused by a fast propagation taking place in oriented monomer aggregates which result from dipole-dipole association of the monomer with the polymer chains formed in the early stages of the reaction (“matrix effect”). Below 10°C the precipitated growing chains are buried in the dead polymer and monomer diffusion toward the occluded chain ends is very limited (“occlusion effect”). Between 10 and 60°C the system gradually changes from one dominated by “occlusion” to one where the “matrix effect” determines the kinetic behavior. The conclusion based on kinetic data is in agreement with results obtained from studies of the postpolymerization in these various systems.     

“Titration” polymerization of monovinylacetylene

A polymer consisting of a saturated carbon backbone with pendent acetylenic groups was prepared from monovinylacetylene. A titration was performed between the monomer and tertiary butyllithium, its lithiating agent. The charge transfer complex formed between the solvent THF and the tertiary butyllithium was used as an indicator of the unreacted butyllithium. Hence, a stoichiometric quantity of tertiary butyllithium was added dropwise to a solution of monovinylacetylene in THF to form lithiovinylacetylene. The addition of a slight excess of butyllithium led to the polymerization of the lithiated monomer. The obtained polymer was reprotonated and characterized. This polymerization was evaluated as a possible route to synthesize poly(vinylacetylene) with processable molecular weights, for its application as a potential carbon fiber precursor. © 1996 John Wiley & Sons, Inc.     

The “fast” and “slow” mode theories of interdiffusion in polymer mixtures: Resolution of a controversy

The theory of interdiffusion of a pair of components in multicomponent polymer mixtures is reviewed from a statistical point of view, and the foundation of the “fast” and “slow” mode theories, as well as the more recent “ANK” theory of interdiffusion is critically examined. The ANK theory reproduces the results of the slow and fast mode theories as the two limits when the vacancy concentration is varied from zero to a large value, and shows that the interdiffusion coefficient in a binary compressible mixture at finite vacancy concentrations can not in general be expressed only in terms of the tracer diffusion coefficients of the components, but it involves in addition the cooperative diffusion coefficient which characterizes the relaxation of total density fluctuations. The predictions of the ANK expression for the molecular dependence of the kinetic factor is compared with recent scattering experiments.     

Examples of “intrinsically” and “extrinsically” determined phase morphologies in polymer alloys

The properties of polymer alloys are strongly dependent on their phase morphologies. Usually, the phase dispersion and domain sizes are affected by the process and can be influenced and stabilized only “extrinsically” by dispersants and emulsifiers. But, there are some examples of alloys with phase morphologies which are “intrinsically” determined and thus independently of the processing conditions. This aspect of phase determining factors is discussed using four principally different examples of polymer alloys.     

Controlled free radical ring-opening polymerization and chain extension of the “living” polymer

Free radical ring-opening polymerization of 2-methylene-1,3-dioxepane (MDP) in the presence of 2,2,6,6-tetramethyl-1-piperidinyloxy free radical (TEMPO) has been achieved to afford a chain polyester (PMDP) with di-t-butyl peroxide (DTBP) as an initiator at 125°C. The polydispersity of the polymers decreases as the concentration of TEMPO is increased. At high TEMPO concentrations, the polydispersity as low as 1.2 was obtained, which is below the theoretical lower limit for a conventional free radical polymerization. A linear relationship between the number-average molecular weight (M_n) and the monomer conversion was observed with the best-fit line passing very close to the origin of the M_n-conversion plot. The isolated and purified TEMPO-capped PMDP polymers have been employed to prepare chain extended polymers upon addition of more MDP monomer. These results are suggestive of the “living” polymerization process. A possible polymerization mechanism might involve thermal homolysis of the TEMPO-PMDP bonds followed by the addition of the monomers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 761–771, 1998     

Tetraphenylethane iniferters. II. Toluene diisocyanate-based polyurethane iniferter for “living” radical polymerization of acrylonitrile

A novel polyurethane iniferter, synthesized from equal moles of toluene diisocyanate and 1,1,2,2-tetraphenyl-1,2-ethanediol, was used to polymerize acrylonitrile to assess whether it proceeded via a “living” radical polymerization mechanism. From the kinetic results, the rate of polymerization could be expressed as R_pα[BPT]^0.96[AN]^1.64. The increase of number-average molecular weight with increase of both conversion and polymerization time, the bimodal molecular weight distribution in gel permeation chromatography and the increase of molecular weight in the post-polymerization of polyacrylonitrile confirm that the present tetraphenylethane-based polyurethane iniferter follows a “living” radical polymerization mechanism. © 1996 John Wiley & Sons, Inc.     

“Continuous” emulsifier‐free emulsion polymerization for the synthesis of monodisperse polymeric latex particles

A “continuous” emulsifier‐free emulsion copolymerization (CEFEP) of styrene and divinylbenzene (DVB) or methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA) has been devised to produce uniform polymeric microspheres of narrow size distribution from 74 nm to 2 μm, depending on reaction time. Monomer and crosslinker vapors were fed continuously into a small reactor. We suggest that after initial nucleation, subsequent CEFEP proceeds near the surfaces of growing particles in a monomer‐swollen outer shell. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3181–3187, 2000     

Transformation of “living” carbocationic and other polymerizations to controlled/“living” radical polymerization

Transformation of “living” carbocationic polymerization of styrene and isobutene to controlled atom transfer radical polymerization (ATRP) is described and formation of the corresponding AB and ABA block copolymers with styrene (St), methyl methacrylate (MMA, methyl acrylate (MA) and isobornyl acrylate (IBA) was demonstrated. A similar approach was applied to the cationic ring opening polymerization of tetrahydrofuran leading to the AB and ABA block copolymers with St, MMA and MA using ATRP. Site transformation approach was also used for the ring opening metathesis polymerization of norbornene and polycondensation systems using polysulfone as an example. In both cases, AB and ABA block copolymers were efficiently formed with styrene and acrylates.     

Metal-polymer “superglue” for dirty polymer surfaces

Current methods of bonding metals to polymeric surfaces involve chemical reactions between atomically clean surfaces (S. Paul, Surface Coatings, Wiley, New York 1985). We propose a novel method of attaching metals to polymeric surfaces which does not require chemical bonding and is designed to be effective for polymeric surfaces which are not clean.     

Salt and solvent effects in “living” carbocationic polymerization

Carbocationic polymerization is strongly affected by medium and salt present in the system. The increase of solvent polarity enhances overall rates of cationic polymerization because it increases the proportion of carbocations in equilibrium with dormant covalent species. Higher solvent polarity might also increase molecular weights due to the reduction of transfer to counterions and may broaden polydispersity by slowing down an exchange between active and dormant species. Added salts may increase the proportion of ionic species by the ionic strength effect. The salts with common ions suppress free ions and lead to a monomodal molecular weight distribution by eliminating free ionic species with long lifetimes. The addition of tetrabutylammonium salts in the polymerization of styrene, initiated by 1-phenylethyl chloride and catalyzed by tin tetrachloride is a typical example. The special salt effect based on exchange of counterions may enhance or reduce the proportion of ionic species and may accelerate the exchange between active and dormant species, affecting the polymerization rates and polydispersities.     

Thermally amendable tailor‐made functional polymer by RAFT polymerization and “click reaction”

This investigation reports the preparation and characterization of thermally amendable functional polymer bearing furfuryl functionality via reversible‐addition fragmentation and chain transfer (RAFT) polymerization and Diels‐Alder (DA) reaction. In this case, furfuryl methacrylate (FMA) was polymerized using 4‐cyano‐4‐[(dodecylsulfanylthiocarbonyl)sulfanyl] pentanoic acid as RAFT reagent and 4,4′‐azobis(4‐cyanovaleric acid) as thermal initiator. ¹H NMR, ¹³C NMR, and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analysis showed that furfuryl group in poly(furfuryl methacrylate) (PFMA) was not affected during RAFT polymerization and the tailor‐made polymer had RAFT end group. The DA reaction was successfully carried out between the reactive furfuryl functionality of PFMA and different bismaleimides. The thermoreversible property of these DA polymers was characterized by FT‐IR and DSC analysis. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3365–3374     

Macromolecular brushes synthesized by “grafting from” approach based on “click chemistry” and RAFT polymerization

Well‐defined macromolecular brushes with poly(N‐isopropyl acrylamide) (PNIPAM) side chains on random copolymer backbones were synthesized by “grafting from” approach based on click chemistry and reversible addition‐fragmentation chain transfer (RAFT) polymerization. To prepare macromolecular brushes, two linear random copolymers of 2‐(trimethylsilyloxy)ethyl methacrylate (HEMA‐TMS) and methyl methacrylate (MMA) (poly(MMA‐co‐HEMA‐TMS)) were synthesized by atom transfer radical polymerization and were subsequently derivated to azide‐containing polymers. Novel alkyne‐terminated RAFT chain transfer agent (CTA) was grafted to polymer backbones by copper‐catalyzed 1,3‐dipolar cycloaddition (azide‐alkyne click chemistry), and macro‐RAFT CTAs were obtained. PNIPAM side chains were prepared by RAFT polymerization. The macromolecular brushes have well‐defined structures, controlled molecular weights, and molecular weight distributions (M_w/M_n ≦ 1.23). The RAFT polymerization of NIPAM exhibited pseudo‐first‐order kinetics and a linear molecular weight dependence on monomer conversion, and no detectable termination was observed in the polymerization. The macromolecular brushes can self‐assemble into micelles in aqueous solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 443–453, 2010     

Kinetics of bulk azide/alkyne “click” polymerization

A bulk step‐growth polymerization of multifunctional azides and alkynes through the copper (I)‐catalyzed azide‐alkyne cycloaddition (CuAAC) reaction is described. The polymerization kinetics of two systems containing different diynes, bisphenol E diyne (BE‐diyne)/bisphenol A bisazide (BA‐bisazide) and tetraethylene glycol diyne (TeEG‐diyne)/BA‐bisazide, are evaluated by differential scanning calorimetry (DSC), shear rheology, and thermogravimetric analysis. The effects of catalyst concentration on reaction kinetics are investigated in detail, as are the thermal properties (glass transition and decomposition temperatures) of the formed polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4093–4102, 2010     

The “Nickel Effect”

Whereas the reaction of ethylene and triethylaluminum under pressure at 100°C yields trialkylaluminum compounds having long alkyl chains, the presence of small amounts of nickel salts induces the formation of butene. The discovery of this “nickel effect” represents the starting point for the development of the Ziegler catalysts. Comparatively little was formerly known about the nature and the mode of action of the catalytically active nickel species. A basis for the elucidation of the effect was provided by studies on the reduction of nickel compounds by organoaluminum compounds, on the occurrence and existence of nickel hydrides, and on interactions between nickel(0) and Lewis acids as well as organic compounds of main group metals. The most significant result of these studies is the recognition that multicenter bonding systems involving trialkylaluminum compounds and nickel atoms are involved. These react further with complex bonded ethylene in what is probably a concerted manner.