Reactivity of Sm(II) compounds as ring‐opening polymerization initiators for lactones

Successful room temperature ring‐opening polymerization (ROP) of ε‐caprolactone and δ‐valerolactone has been carried out using SmX₂ (X = I, Br, and cyclopentadienyl (Cp)) catalysts. SmI₂ in the presence of metallic Sm was found to have enhanced reactivity as room temperature ROP initiator for lactones as compared to pure SmI₂. SmBr₂ and SmCp₂ showed increased reactivity compared with the Sm/SmI₂ system due to their higher reductive power. The catalyst concentration and time of polymerization showed a marked effect on number‐average molecular weight (M_n). There was a decrease in M_n on increasing reaction time and decreasing catalyst concentration. The initiation mechanism is discussed based on end group analysis of low molecular weight polymers.     

Synthesis and Characterization of Poly(ε-caprolactone-co-δ-valerolactone) with Pendant Carboxylic Functional Groups

In this paper, aliphatic polyesters functionalized with pendant carboxylic groups were synthesized via several steps. Firstly, substituted cyclic ketone, 2‐(benzyloxycarbonyl methyl)cyclopentanone (BCP) was prepared through the reaction of enamine with benzyl‐2‐bromoacetate, and subsequently converted into the relevant functionalized δ‐valerolactone derivative, 5‐(benzyloxy carbonylmethyl)‐δ‐valerolactone (BVL) by the Baeyer‐Villiger oxidation. Secondly, the ring‐opening polymerization of BVL with ε‐caprolactone was carried out in bulk using stannous octoate as the catalyst to produce poly(ε‐caprolactone‐co‐δ‐valerolactone) bearing the benzyl‐protected carboxyl functional groups [P(CL‐co‐BVL)]. Finally, the benzyl‐protecting groups of P(CL‐co‐BVL) were effectively removed by H₂ using Pd/C as the catalyst to obtain poly(ε‐caprolactone‐co‐δ‐valerolactone) bearing pendant carboxylic acids [P(CL‐co‐CVL)]. The structure and the properties of the polymer have been studied by Nuclear Magnetic Resonance (NMR), Fourier Infrared Spectroscopy (FT‐IR) and Differential Scan Calorimetry (DSC) etc. The NMR and FT‐IR results confirmed the polymer structure, and the ¹³C NMR spectra have clearly interpreted the sequence of ε‐caprolactone and 5‐(benzyloxycarbonylmethyl)‐δ‐valerolactone in the copolymer. When the benzyl‐protecting groups were removed, the aliphatic polyesters bearing carboxylic groups were obtained. Moreover, the hydrophilicity of the polymer was improved. Thus, poly(ε‐caprolactone‐co‐δ‐valerolactone) might have great potential in biomedical fields.     

Homoleptic,bis‐ligated magnesium complexes for ring‐opening polymerization of lactide and lactones: Synthesis,structure, polymerization behavior and mechanism studies

Bis‐ligated, homoleptic magnesium complexes 1–3 were synthesized through the reaction of 1 equiv. dibutyl magnesium with 2 equiv. β‐ketiminato ligands bearing different substituents on the nitrogen atom and 8 position on benzocyclohexanone. All of the complexes were identified by nuclear magnetic resonance (NMR) and X‐ray crystallography. Complexes 2 and 3 adopted distorted tetrahedral geometry around Mg, by chelating of two ancillary ligands, while complex 1 adopted a dimeric structure with penta‐coordination around Mg. These complexes can be used as efficient catalysts for the ring‐opening polymerization of L‐lactide, ε‐caprolactone, δ‐valerolactone (δ‐VL) and trimethylene carbonate in the presence of alcohol as a co‐initiator. With the increasing steric bulk of the ancillary ligands, the catalytic activity of Mg complexes was improved significantly. Particularly, complex 3 having the largest steric hindrance showed excellent catalytic performance for the polymerization of δ‐VL. It could polymerize 800 equiv. δ‐VL in 10 min, and produce polyvalerolactone with narrow molecular weight distributions (M_w/M_n < 1.2) at 35°C or higher temperature. No transesterification side reaction was observed. Moreover, complex 3 exhibited good tolerance to excessive alcohol and an immortal polymerization characteristic. The mechanism studies by in situ NMR demonstrated a coordination‐insertion process. Besides, it revealed that the steric bulky substituents in the active species derived from the complex and alcohol prevented the metal center from deactivation.     

Controlled/living ring‐opening polymerization of ε‐caprolactone with salicylic acid as the organocatalyst

Ring‐opening polymerization (ROP) of ε‐caprolactone (CL) using salicylic acid (SAA) as the organocatalyst and benzyl alcohol as the initiator in bulk at 80 °C successfully proceeded to give a narrowly distributed poly(ε‐caprolactone) (PCL). In addition, 2‐hydroxyethyl methacrylate, propargyl alcohol, 6‐azido‐1‐hexanol, and methoxy poly(ethylene glycol) were also used as functional initiators. The ¹H NMR, SEC, and MALDI‐TOF MS measurements of the PCL clearly indicate the presence of the initiator residue at the chain end, implying that the SAA‐catalyzed ROP of CL was through the activated monomer mechanism. The kinetic experiments confirmed the controlled/living nature of the SAA‐catalyzed ROP of CL. Furthermore, the block copolymerization of CL and δ‐valerolactone successfully proceeded to give poly(ε‐caprolactone)‐block‐poly(δ‐valerolactone). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1185–1192     

Synthesis of diblock copolymers by combination of organocatalyzed ring‐opening polymerization and atom transfer radical polymerization using trichloroethanol as a bifunctional initiator

This study reports an application of trichloroethanol (TCE) as a bifunctional initiator for the synthesis of block copolymers (BCPs) by organocatalyzed ring‐opening polymerization (OROP) and atom transfer radical polymerization (ATRP). TCE was employed to synthesize a low dispersity poly (valerolactone) macroinitiator, which was subsequently used for the ATRP of tert‐butyl methacrylate. While it is known that TCE can serve as an initiator in ATRP, the ability to induce polymerization under OROP is reported for the first time. The formation of well‐defined BCPs was confirmed by gel permeation chromatography and ¹H NMR. Computational studies were performed to obtain a molecular‐level understanding of the ring‐opening polymerization mechanism involving TCE as initiator. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 563–569     

Unprecedented polymerization of δ‐valerolactone initiated by the stable enolate of γ‐butyrolactone

Polymerization of δ‐valerolactone has been studied using γ‐butyrolactone enolate as initiator. Mechanistic studies show that the initiation proceeds with incorporation of the initiator into the growing polymer chain and acyl‐oxygen bond cleavage of the monomer. The molecular weight distribution of the resulting polymers is narrow compared to that of poly(δ‐valerolactone) obtained from common anionic initiators, e. g. alkali metal alkoxides.     

Ring‐opening polymerization of cyclic esters promoted by phosphido‐diphosphine pincer group 3 complexes

Phosphido‐diphosphine Group 3 metal complexes 1–4 [(o‐C₆H₄PR₂)₂P‐M(CH₂SiMe₃)₂; R = Ph, 1 : M = Y, 2 : M = Sc; R = iPr, 3 : M = Y, 4 : M = Sc] are very efficient catalysts for the ring‐opening polymerization (ROP) of cyclic esters such as ε‐caprolactone (ε‐CL), L ‐lactide, and δ‐valerolactone under mild polymerization conditions. In the ROP of ε‐CL, complexes 1–4 promote quantitative conversion of high amount of monomer (up to 3000 equiv) with very high turnover frequencies (TOF) (～4 × 10⁴ mol_CL/mol_I h) showing a catalytic activity among the highest reported in the literature. The immortal and living ROP of ε‐CL and L ‐lactide is feasible by combining complexes 1–4 with 5 equiv of 2‐propanol. Polymers with controlled molecular parameters (M_n, end groups) and low polydispersities (M_w/M_n = 1.05–1.09) are formed as a result of fast alkoxide/alcohol exchange. In the ROP of δ‐valerolactone, complexes 1–4 showed the same activity observed for lactide (L ‐ and D ,L ‐lactide) producing high molecular weight polymers with narrow distribution of molar masses. Complexes 1–4 also promote the ROP of rac‐β butyrolactone affording atactic low molecular weight poly(hydroxybutyrate) bearing unsaturated end groups probably generated by elimination reactions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

MCM‐41‐Immobilized [Rh(cod)OCH3]2 Complex – A Hybrid Catalyst for the Polymerization of Phenylacetylene and Its Ring‐Substituted Derivatives

The immobilization of [Rh(cod)OCH₃]₂ (cod = cycloocta‐1,5‐diene) on mesoporous molecular sieves MCM‐41 provides the first inorganic‐type hybrid catalyst, which affords heterogeneous polymerization of phenylacetylene and its ring‐substituted derivatives, – 2‐fluorophenylacetylene, 4‐fluorophenylacetylene, and 4‐pentylphenylacetylene – into readily isolable high‐molecular‐weight (M̄_w from 50 000 to 180 000) substituted polyvinylenes of high cis‐transoid structure. The activity of this catalyst is compared with that of homogeneous catalyst [Rh(cod)OCH₃]₂.     

Ring‐opening polymerization of lactones using zirconocene catalytic systems: Block copolymerization with methyl methacrylate

The ring‐opening polymerization of ε‐caprolactone (ε‐CL) and δ‐valerolactone (δ‐VL) using nine catalytic systems consisting of a combination of three C_2v zirconocene complexes and three borate cocatalysts is discussed. The polymerizations proceed in a well‐controlled manner, producing polymers with relatively high molecular weights and narrow molecular weight distributions. Kinetic experiments of the polymerization of ε‐CL with the catalytic system Cp₂ZrMe₂/B(C₆F₅)₃ (1) showed a linear dependence between polymerization yield and molecular weight with time, as well as between the molecular weight with the molar ratio of the monomer over the catalyst [ε‐CL]/[Zr], indicating sufficient control of the polymerization reaction. The catalytic system (1) was utilized for the synthesis of well‐defined block copolymers of MMA with ε‐CL and δ‐VL. All samples were characterized by size exclusion chromatography, nuclear magnetic resonance, and differential scanning calorimetry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3524–3537, 2007     

Controlled cationic ring‐opening polymerization of cyclic thiocarbonates with ester groups

This work deals with the cationic ring‐opening polymerization of the cyclic thiocarbonates 5‐benzoyloxymethyl‐5‐methyl‐1,3‐dioxane‐2‐thione ( 1 ), 5,5‐dimethyl‐1,3‐dioxane‐2‐thione ( 2 ), and 4‐benzoyloxymethyl‐1,3‐dioxane‐2‐thione ( 3 ). The polymerization was carried out with 2 mol % trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, boron trifluoride etherate, or triethyloxonium tetrafluoroborate as the initiator to afford the polythiocarbonate with a narrow molecular weight distribution accompanying isomerization of the thiocarbonate group. The molecular weight of the obtained polymer could be controlled by the feed ratio of the monomer to the initiator and increased when the second monomer was added to the polymerization mixture after the quantitative consumption of the monomer in the first stage. The block copolymerization of 2 and 3 was also achieved, and this supported the idea that the cationic ring‐opening polymerization of these monomers proceeded via a living process. The order of the polymerization rate was 3 > 2 > 1 . The cationic ring‐opening polymerization of 1 and 3 involved the neighboring group participation of ester groups according to the polymerization rate and molecular orbital calculations with the ab initio method. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 185–195, 2003     

New Methacryloxy N‐Vinyl‐2‐pyrrolidinone‐ and Lactone‐Based Macromers

New ω‐methacryloxy‐terminated N‐vinyl‐2‐pyrrolidinone oligomers were prepared by reaction of the corresponding ω‐hydroxy‐terminated N‐vinyl‐2‐pyrrolidinone oligomers with 2‐[(1‐imidazolyl)formyloxy] ethyl methacrylate (HEMA‐Im). The oligomeric precursor had been obtained by radical chain transfer polymerization making use of isopropoxyethanol as a solvent and a chain transfer agent. α,ω‐Dimethacryloxy‐terminated ε‐caprolactone and δ‐valerolactone oligomers were also prepared by reaction of their α‐hydroxy‐ω‐methacryloxy‐terminated precursors with HEMA‐Im. These had been in turn synthesized by ring‐opening polymerization of the corresponding lactones in the presence of 2‐hydroxyethyl methacrylate as the initiator and tin octanoate as the catalyst. Due to the presence of methacrylic functions at their chain ends, both VP and lactone oligomers participate in radical polymerization reactions and can be therefore classified as radical macromers. Both macromer families have several potential applications, such as use in the synthesis of mixed hydrophilic/hydrophobic hydrogels. All macromers were characterized by NMR spectroscopy and size‐exclusion chromatography (SEC). The polymerization kinetics of the lactone macromers were also analyzed by ¹H NMR spectroscopy.     

Synthesis of new amphiphilic diblock copolymers containing poly(ethylene oxide) and poly(α‐olefin)

This article discusses an effective route to prepare amphiphilic diblock copolymers containing a poly(ethylene oxide) block and a polyolefin block that includes semicrystalline thermoplastics, such as polyethylene and syndiotactic polystyrene (s‐PS), and elastomers, such as poly(ethylene‐co‐1‐octene) and poly(ethylene‐co‐styrene) random copolymers. The broad choice of polyolefin blocks provides the amphiphilic copolymers with a wide range of thermal properties from high melting temperature ～270 °C to low glass‐transition temperature ～?60 °C. The chemistry involves two reaction steps, including the preparation of a borane group‐terminated polyolefin by the combination of a metallocene catalyst and a borane chain‐transfer agent as well as the interconversion of a borane terminal group to an anionic (? O^?K⁺) terminal group for the subsequent ring‐opening polymerization of ethylene oxide. The overall reaction process resembles a transformation from the metallocene polymerization of α‐olefins to the ring‐opening polymerization of ethylene oxide. The well‐defined reaction mechanisms in both steps provide the diblock copolymer with controlled molecular structure in terms of composition, molecular weight, moderate molecular weight distribution (M_w/M_n < 2.5), and absence of homopolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3416–3425, 2002     

Synthesis and cationic ring‐opening polymerization of oxetane monomer containing five‐membered cyclic carbonate moiety via highly chemoselective addition of CO2

The bicyclic amidinium iodide effectively catalyzed the reaction of carbon dioxide and the epoxy‐containing oxetane under ordinary pressure and mild conditions with high chemoselectivity to give the corresponding oxetane monomer containing five‐membered cyclic carbonate quantitatively. The cationic ring‐opening polymerization of the obtained monomer by boron trifluoride diethyl ether proceeded to give linear polyoxetane bearing five‐membered cyclic carbonate pendant group in high yield. The molecular weight of the polyoxetane was higher than that of polyepoxide obtained by the cationic ring‐opening polymerization of epoxide monomer containing five‐membered cyclic carbonate. The cyclic carbonate functional crosslinked polyoxetanes were also synthesized by the cationic ring‐opening copolymerization of cyclic carbonate having oxetane and commercially available bisoxetane monomers. Analyses of the resulting polyoxetanes were performed by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2606–2615     

Titanium‐mediated [CpTiCl2(OEt)] ring‐opening polymerization of lactides: A novel route to well‐defined polylactide‐based complex macromolecular architectures

Among three cyclopentadienyl titanium complexes studied, CpTiCl₂(OEt), containing a 5% excess CpTiCl₃, has proven to be a very efficient catalyst for the ring‐opening polymerization (ROP) of L ‐lactide (LLA) in toluene at 130 °C. Kinetic studies revealed that the polymerization yield (up to 100%) and the molecular weight increase linearly with time, leading to well‐defined PLLA with narrow molecular weight distributions (M_w/M_n ≤ 1.1). Based on the above results, PS‐b‐PLLA, PI‐b‐PLLA, PEO‐b‐PLLA block copolymers, and a PS‐b‐PI‐b‐PLLA triblock terpolymer were synthesized. The synthetic strategy involved: (a) the preparation of OH‐end‐functionalized homopolymers or diblock copolymers by anionic polymerization, (b) the reaction of the OH‐functionalized polymers with CpTiCl₃ to give the corresponding Ti‐macrocatalyst, and (c) the ROP of LLA to afford the final block copolymers. PMMA‐g‐PLLA [PMMA: poly(methyl methacrylate)] was also synthesized by: (a) the reaction of CpTiCl₃ with 2‐hydroxy ethyl methacrylate, HEMA, to give the Ti‐HEMA‐catalyst, (b) the ROP of LLA to afford a PLLA methacrylic‐macromonomer, and (c) the copolymerization (conventional and ATRP) of the macromonomer with MMA to afford the final graft copolymer. Intermediate and final products were characterized by NMR spectroscopy and size exclusion chromatography, equipped with refractive index and two‐angle laser light scattering detectors. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1092–1103, 2010     

Bifunctional imidodiphosphoric acid‐catalyzed controlled/living ring‐opening polymerization of trimethylene carbonate resulting block, α,ω‐dihydroxy telechelic,and star‐shaped polycarbonates

The ring‐opening polymerization (ROP) of trimethylene carbonate (TMC) using imidodiphosphoric acid (IDPA) as the organocatalyst and benzyl alcohol (BnOH) as the initiator has been investigated. The polymerization proceeded without decarboxylation to afford poly(trimethylene carbonate) (PTMiC) with controlled molecular weight and narrow polydispersity. ¹H NMR, SEC, and MALDI‐TOF MS measurements of the obtained PTMC clearly indicated the quantitative incorporation of the initiator at the chain end. The controlled/living nature for the IDPA‐catalyzed ROP of TMC was confirmed by the kinetic and chain extension experiments. A bifunctional activation mechanism was proposed for IDPA catalysis based on NMR and FTIR studies. Additionally, 1,3‐propanediol, 1,1,1‐trimethylolpropane, and pentaerythritol were used as di‐ol, tri‐, and tetra‐ol initiators, producing the telechelic or star‐shaped polycarbonates with narrow polydispersity indices. The well‐defined diblock copolymers, poly(trimethylene carbonate)‐block‐poly(δ‐valerolactone) and poly(trimethylene carbonate)‐block‐poly(ε‐caprolactone), have been successfully synthesized by using the IDPA catalysis system. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1009–1019     

Novel Biodegradable Aliphatic Polycarbonate Based on Ketal Protected Dihydroxyacetone

Summary: A novel aliphatic polycarbonate based on ketal protected dihydroxyacetone was synthesized by ring‐opening polymerization of cyclic carbonate monomer, 2,2‐ethylenedioxypropane‐1,3‐diol carbonate (EOPDC), in bulk. Effects of polymerization conditions such as catalysts, catalyst concentration, reaction temperature and reaction time on the polymerization were investigated. The polycarbonate obtained was characterized by GPC, FTIR, ¹H NMR, ¹³C NMR and DSC. The study on in vitro degradation of PEOPDC shows that the degradation mainly results from surface erosion.

Synthesis of an aliphatic polycarbonate with a high molecular weight by ring‐opening polymerization of cyclic carbonate monomer EOPDC.     

Titanium‐mediated living radical styrene polymerizations. VI. Cp2TiCl‐catalyzed initiation by epoxide radical ring opening: Effect of the reducing agents,temperature, and titanium/epoxide and titanium/zinc ratios

The effects of the reducing agent, temperature, and epoxide/Ti and Ti/Zn ratios were investigated for the Cp₂TiCl‐catalyzed living radical polymerization of styrene initiated by epoxide radical ring opening. No reduction of bis(cyclopentadienyl)titanium dichloride occurred with Cu, Devarda's alloy, Ni, Ce, Cr, Sn, Mo, and ascorbic acid, whereas Al, lithium nitride, Mn, Sm, and Fe led to free‐radical or poorly controlled polymerizations. The best results were obtained with Zn alloy, powder, or nanoparticles. Nano‐Zn provided the lowest polydispersity index values, highest initiator efficiency (IE), and fastest reaction rate while maintaining a well‐defined living polymerization. Progressively lower polydispersity was obtained with an increasing excess of Zn with an optimum at Cp₂TiCl/Zn = 1/2. This was rationalized through the heterogeneous nature of Zn and its possible involvement in the reversible termination step. The polymerization was insensitive to light or dark conditions, and a linear dependence of M_n on the conversion was observed at all temperatures in the 60–130 °C range with an optimum at 70–90 °C. A stoichiometric 1/2 epoxide/Ti ratio provided low polydispersity (weight‐average molecular weight/number‐average molecular weight < 1.2) and high IE, whereas increasing the epoxide/Ti ratio to 1/3 maintained a low polydispersity index but decreased the IE. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2156–2165, 2006     

Solvent‐free ring‐opening polymerization of lactones with hydrogen‐bonding bisurea catalyst

Development of effective organocatalysts for the living ring‐opening polymerization (ROP) of lactones is highly desired for the preparation of biocompatible and biodegradable polyesters with controlled microstructures and physical properties. Herein, a new class of hydrogen‐bond donating bisurea catalysts is reported for the ROP of lactones under solvent‐free conditions. ROP of lactones mediated by the bisurea/7‐methyl‐1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (MTBD) catalyst exhibits a living/controlled manner, affording the polymers and copolymers with the well‐defined structure, predictable molecular weight, narrow molecular weight distribution, and high selectivity for monomer at low catalyst loadings at ambient temperature. The possible mechanism of bisurea/MTBD‐catalyzed ROP of lactones is proposed, in which the bisurea activates the carbonyl group of lactones while MTBD facilitates the nucleophilic attack of the initiating/propagating alcohol by hydrogen bonding. Moreover, the poly(ε‐caprolactone‐co‐δ‐valerolactone) [P(CL‐co‐VL)] random copolymers with various compositions were synthesized using the bisurea/MTBD catalyst. The measurements of thermal properties and crystalline structure demonstrate that the CL and VL units are cocrystallized in the crystalline phase of P(CL‐co‐VL) copolymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 90–100     

Synthesis of a new 2‐amino‐glycan,poly‐(1→6)‐α‐D‐mannosamine,by ring‐opening polymerization of 1,6‐anhydro‐mannosamine derivatives

A stereoregular 2‐amino‐glycan composed of a mannosamine residue was prepared by ring‐opening polymerization of anhydro sugars. Two different monomers, 1,6‐anhydro‐2‐azido‐mannose derivative ( 3 ) and 1,6‐anhydro‐2‐(N, N‐dibenzylamino)‐mannose derivative ( 6 ), were synthesized and polymerized. Although 3 gave merely oligomers, 6 was promptly polymerized into high polymers of the number‐average molecular weight (M_n) of 2.3 × 10⁴ to 2.9 × 10⁴ with 1,6‐α stereoregularity. The differences of polymerizability of 3 and 6 from those of the corresponding glucose homologs were discussed. It was found that an N‐benzyl group is exceedingly suitable for protecting an amino group in the polymerization of anhydro sugars of a mannosamine type. The simultaneous removal of O‐ and N‐benzyl groups of the resulting polymers was achieved by using sodium in liquid ammonia to produce the first 2‐amino‐glycan, poly‐(1→6)‐α‐D ‐mannosamine, having high molecular weight through ring‐opening polymerization of anhydro sugars.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Anionic ring‐opening polymerization of a five‐membered cyclic carbonate having a glucopyranoside structure

Anionic ring‐opening polymerizations of methyl 4,6‐O‐benzylidene‐2,3‐O‐carbonyl‐α‐D ‐glucopyranoside (MBCG) were investigated using various anionic polymerization initiators. Polymerizations of the cyclic carbonate readily proceeded by using highly active initiators such as n‐butyllithium, lithium tert‐butoxide, sodium tert‐butoxide, potassium tert‐butoxide, and 1,8‐diazabicyclo[5.4.0]undec‐7‐ene, whereas it did not proceed by using N,N‐dimethyl‐4‐aminopyridine and pyridine as initiators. In a polymerization of MBCG (1.0 M), 99% of MBCG was converted within 30 s to give the corresponding polymer with number‐averaged molecular weight (M_n) of 16,000. However, the M_n of the polymer decreased to 7500 when the polymerization time was prolonged to 24 h. It is because a backbiting reaction might occur under the polymerization conditions. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013