Molecular parameters of hyperbranched polymers made by self‐condensing vinyl polymerization of macroinimers

The molecular weight averages and the degree of branching, DB, of a hyperbranched polymer obtained by self‐condensing vinyl polymerization (SCVP) of a macroinimer A‐(m)_γ‐B* is calculated by modifying the existing equations for SCVP. The polydispersity is lowered by a factor (γ + 1), where γ is the degree of polymerization of the macroinimer. DB decreases with γ, however, at full conversion the DB of the polymacroinimer is approximately 60% higher than expected from the “dilution” of an AB* inimer with linear m units. This is the result of the existence of a new kind of branched units. The structure of polymacroinimers is similar to the pattern of a highly branched copolymer obtained by self‐condensing vinyl copolymerization. However, the polydispersity index and the DB of these two processes are different, for a given molecular weight the polydispersity and the DB of the macroinimer is lower than the corresponding parameters for SCVCP at the same value of γ.     

Synthesis and characterization of hyperbranched polystyrene copolymers by atom transfer radical self‐condensing vinyl copolymerization

A series of hyperbranched polystyrene copolymers were synthesized by atom transfer radical self‐condensing vinyl copolymerization (ATR‐SCVCP) of p‐chloromethylstyrene (CMS) and styrene using the complex CuCl/2,2′‐bipyridyl as catalyst. The composition and structures of these hyperbranched polystyrene copolymers were characterized by ¹H‐NMR and ¹³C‐NMR spectroscopy, gel permeation chromatography (GPC), and elemental analysis. The thermal properties were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The influence of the reaction conditions, including comonomer ratios, reaction time, and polymerization temperature, on the molecular weight and degree of branching (DB) of the resulting copolymers were investigated in detail. With increasing ratios of styrene in total monomers from 10 to 90%, the resulting copolymers have number‐average molecular weights that change from 6.0 to 10.5 kDa, polydispersities from 2.96 to 4.74, and a degree of branching from 0.01 to 0.45. The experimental results indicated that the structures and properties can be controlled by adjusting the reaction conditions. The concentrations of styrene in the copolymers slightly affect the copolymer structures and T_g when they are less than 50 mol%, but have a large effect at greater concentrations. The results also show that the ATR‐SCVP reaction does not follow a complete ATRP feature, but has some characteristics of step‐growth polymerization. Copyright © 2009 John Wiley & Sons, Ltd.     

Kinetics of self‐condensing vinyl hyperbranched polymerization in three‐dimensional space

Self‐condensing vinyl hyperbranched polymerization (SCVP) with A‐B* type monomer is simulated applying Monte Carlo method using 3d bond fluctuation lattice model in three‐dimensional space. The kinetics of SCVP with zero active energy of reaction is studied in detail. It is found that the maximal number–average and weight–average polymerization degrees and the maximal molecular weight distribution, at varying the initial monomer concentration and double bond conversion, are about 52, 190, and 3.93, respectively, which are much lower than theoretical values. The maximal average fraction of branching points is about 0.27, obtained at full conversion at the initial monomer concentration of 0.75. The simulation demonstrated the importance of steric effects and intramolecular cyclization in self‐condensing vinyl hyperbranched polymerization. The results are also compared with experiments qualitatively and a good agreement is achieved. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4486–4494, 2008     

Synthesis and characterization of optically active helical vinyl polymers via free radical polymerization

A facile synthetic route to prepare the dual‐functional molecule, 2,5‐bis(4′‐carboxyphenyl)styrene, was developed. The esterification of this compound with chiral alcohols, that is, (S)‐(+)‐sec‐butanol/(R)‐(?)‐sec‐butanol, (S)‐(+)‐sec‐octanol/(R)‐(?)‐sec‐octanol, and D ‐(+)‐menthol/L ‐(?)‐menthol, respectively, yielded three enantiomeric pairs of novel vinyl monomers, which underwent radical polymerization to obtain helical polymers with an excess screw sense. These polymers exhibited optical rotations as large as fourfold those of the corresponding monomers. Their helical conformations were quite stable as revealed by the almost unchanged chiroptical properties measured at different temperatures. The polymers with linear alkyl tails in the side‐groups formed irreversibly columnar nematic phases in melt although the corresponding monomers were not liquid crystalline. Whereas, the polymers with cyclic tails generated no mesophase. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2408–2421, 2009     

Synthesis of hyperbranched poly(tert‐butyl acrylate) by self‐condensing atom transfer radical polymerization of a macroinimer

Using 2‐hydroxyethyl α‐bromoisobutyrate as initiator, atom transfer radical polymerization (ATRP) of tert‐butyl acrylate leads to poly(tert‐butyl acrylate) (PtBA) with a hydroxyl group at one and a bromine atom at the other end. Esterification of the hydroxyl group of these heterotelechelic polymers with acryloyl chloride yields PtBA (M_n = 3 060) with a polymerizable double bond at one end and a bromine atom at the other end which can act as an initiator in ATRP (“macroinimer”). Self‐condensing ATRP of such a macroinimer leads to hyperbranched or highly branched PtBA. The polymer was characterized by GPC viscosity measurements. Even at M_w = 78 800, a rather low polydispersity index of M_w/M_n = 2.6 was obtained. A significantly lower value for the Mark‐Houwink exponent (α = 0.47 compared to α = 0.80 for linear PtBA) indicates the compact nature of the branched macromolecules.     

One‐pot synthesis of linear‐hyperbranched diblock copolymers via self‐condensing vinyl polymerization and ring opening polymerization

The linear poly(ε–caprolacton)‐b‐hyperbrached poly(2‐((α‐bromobutyryl)oxy)ethyl acrylate) (LPCL‐b‐HPBBEA) has been successfully synthesized by simultaneous ring‐opening polymerization (ROP) of CL and self‐condensing vinyl polymerization (SCVP) of BBEA in one‐pot. The HPBBEA homopolymers were found to be formed in the polymerization because of the competitive reactions induced by initiation with bifunctional initiator, 2‐hydroxylethyl‐2′‐bromoisobutyrate (HEBiB), and inimer BBEA. The separation of LPCL‐b‐HPBBEA from the polymerization products was achieved by precipitation in methanol. With feed ratio increase of CL and BBEA to HEBiB, the molecular weights of PCL and HPBBEA blocks in the block copolymer enhanced; and the polymerization rate of CL started to decrease gradually after 12 h of polymerization, but the polymerization rate of BBEA was maintained until 24 h of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7628–7636, 2008     

Synthesis and self‐assembly of hyperbranched polymers with benzoyl terminal arms

Hyperbranched polyesters (HPs) with a variable content of benzoyl terminal groups were synthesized through the chemical modification of the HPs' cores by substituting a controlled fraction of the terminal hydroxyl groups with benzoyl chloride. The resulting hyperbranched polymers that were modified by benzoyl groups (HPs‐B) were characterized by ¹H NMR, FTIR, differential scanning calorimetry (DSC), and gel permeation chromatography (GPC). Research results revealed that self‐assembled structures could be formed in selected solvents (acetone/n‐hexane). It was found that the morphologies of self‐assembled structures could be adjusted by controlling the content of outside benzoyl terminal groups in the hyperbranched polymers, the volume ratio of acetone with n‐hexane, and the concentration of the hyperbranched polymers with benzoyl terminal arms. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5554–5561, 2005     

Reversible addition–fragmentation chain transfer mediated radical polymerization of asymmetrical divinyl monomers targeting hyperbranched vinyl polymers

Reversible addition–fragmentation chain transfer (RAFT) mediated radical polymerizations of allyl methacrylate and undecenyl methacrylate, compounds containing two types of vinyl groups with different reactivities, were investigated to provide hyperbranched polymers. The RAFT agent benzyl dithiobenzoate was demonstrated to be an appropriate chain‐transfer agent to inhibit crosslinking and obtain polymers with moderate‐to‐high conversions. The polymerization of allyl methacrylate led to a polymer without branches but with five‐ or six‐membered rings. However, poly(undecenyl methacrylate) showed an indication of branching rather than intramolecular cycles. The hyperbranched structure of poly(undecenyl methacrylate) was confirmed by a combination of ¹H, ¹³C, ¹H–¹H correlation spectroscopy, and distortionless enhancement by polarization transfer 135 NMR spectra. The branching topology of the polymers was controlled by the variation of the reaction temperature, chain‐transfer‐agent concentration, and monomer conversion. The significantly lower inherent viscosities of the resulting polymers, compared with those of linear analogues, demonstrated their compact structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 26–40, 2007     

Synthesis of ionic polymers by free radical polymerization using aprotic trimethylsilylmethyl-substituted monomers

Aprotic ionic polymers containing trimethylsilylmethyl-substituted imidazolium structures are synthesized using free radical polymerization of monomers comprising a vinyl group either at the cation or at the anion. Bulk polymerization is used for the room temperature ionic liquid monomer 1-trimethylsilylmethyl-3-vinylimidazolium bis(trifluoromethylsulfonyl)imide. In contrast to this, solution polymerization is applied for 1-trimethylsilylmethyl-3-methylimidazolium p-styrene sulfonate because this monomer undergoes self-polymerization during melting at a higher temperature than selected for bulk polymerization. Glass transition temperature (T _g) of the ionic polymers and intrinsic viscosity measurements indicate differences between these polymers, which are composed either of a polycation with a trimethylsilylmethyl substituent at each vinylimidazolium segment of the polymer chain and mobile bis(trifluoromethylsulfonyl)imide (NTf₂⁻) anions or a polyanion containing p-styrene sulfonate segments and mobile 1-trimethylsilylmethyl-3-methylimidazolium cations. The new aprotic ionic polymers containing trimethylsilylmethyl substituents may be interesting for application in adhesive, interlayer and membrane manufacturing.     

Synthesis of sulfur‐containing hyperbranched polymers by the bisthiolation polymerization of diethynyl disulfide derivatives

The reaction of phenyl propynyl ether and diphenyl disulfide in the presence of 1 mol % tetrakis(triphenylphosphine)palladium as a model reaction of the polymerization of bis(4‐prop‐2‐ynyloxyphenyl) disulfide ( 1a ) gave a Z‐substituted dithioalkene. No E‐substituted dithioalkene was formed in this reaction. The palladium‐catalyzed bisthiolation polymerization of a diethynyl disulfide derivative, 1a , in benzene, was carried out to give a hyperbranched polymer ( 5a ) containing a Z‐substituted dithioalkene unit after reaction for 4 h at 70 °C. From the gel permeation chromatography analysis (chloroform, PSt standards), the number‐average and weight‐average molecular weights of 5a were found to be 8,100 and 57,000, respectively. The structure of 5a was confirmed by ¹H and ¹³C NMR spectra. The obtained polymer was soluble in common organic solvents such as benzene, acetone, and CHCl₃. Polymerization for more than 5 h gave insoluble products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3580–3587, 2007     

Control of polymer topology through transition-metal catalysis: synthesis of hyperbranched polymers by cobalt-mediated free radical polymerization

A novel approach was demonstrated for the synthesis of hyperbranched polymers by direct free radical polymerization of divinyl monomers controlled by a cobalt chain transfer catalyst (1). By controlling the competition between propagation and chain transfer with 1, the free radical polymerization of ethylene glycol dimethacrylate (3) afforded soluble hyperbranched polymers in one pot. The structure of the hyperbranched polymers was confirmed by (1)H and (13)C NMR. The molecular weight and intrinsic viscosity of the hyperbranched polymers were measured by matrix-assisted laser desorption ionization (MALDI) mass spectrometry and size exclusion chromatography (SEC) equipped with triple detectors. The intrinsic viscosities of the hyperbranched polymers are much lower than those of their linear analogues and do not show molecular weight dependence. The unique structure and properties of these hyperbranched polymers combined with the commercial availability of many divinyl monomers and the robustness of free radical polymerization make this new approach attractive for the preparation of new functional materials.     

Synthesis and characterization of hyperbranched amphiphilic block copolymers prepared via self‐condensing RAFT polymerization

Four families of hyperbranched amphiphilic block copolymers of styrene (Sty, less polar monomer) and 2‐vinylpyridine (2VPy, one of the two more polar monomers) or 4‐vinylpyridine (4VPy, the other polar monomer) were prepared via self‐condensing vinyl reversible addition‐fragmentation chain transfer polymerization (SCVP‐RAFT). Two families contained 4VPy as the more polar monomer, one of which possessing a Sty‐b‐4VPy architecture, and the other possessing the reverse block architecture. The other two families bore 2VPy as the more polar monomer and had either a 2VPy‐b‐Sty or a Sty‐b‐2VPy architecture. Characterization of the hyperbranched block copolymers in terms of their molecular weights and compositions indicated better control when the VPy monomers were polymerized first. Control over the molecular weights of the hyperbranched copolymers was also confirmed with the aminolysis of the dithioester moiety at the branching points to produce linear polymers with number‐average molecular weights slightly greater than the theoretically expected ones, due to recombination of the resulting thiol‐terminated linear polymers. The amphiphilicity of the hyperbranched copolymers led to their self‐assembly in selective solvents, which was probed using atomic force microscopy and dynamic light scattering, which indicated the formation of large spherical micelles of uniform diameter. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1310–1319     

Preparation by controlled radical polymerization and self‐assembly via base‐recognition of synthetic polymers bearing complementary nucleobases

The radical polymerization of three monomers bearing nucleobases 1‐(4‐vinylbenzyl)thymine (VBT), 1‐(4‐vinylbenzyl)uracil (VBU) and 9‐(4‐vinylbenzyl)adenine (VBA) was investigated. The corresponding homopolymers could be prepared in high yields via conventional radical polymerization. However, the resulting polymers were found to be only soluble in a few polar solvents. On the other hand, copolymers of dodecyl methacrylate (DMA) with either VBT or VBA could be prepared via both free radical polymerization and atom transfer radical polymerization and could be dissolved in a large variety of organic solvents. Moreover, the formed complementary copolymers P(VBT‐co‐DMA) and P(VBA‐co‐DMA) were found to self‐assemble in dilute solutions in dioxane or chloroform via base recognition, as evidenced by a significant hypochromicity effect in UV spectroscopy. Nevertheless, at higher concentrations in chloroform, both dynamic light scattering and optical microscopy indicate that P(VBT‐co‐DMA), P(VBA‐co‐DMA), or P(VBT‐co‐DMA)/P(VBA‐co‐DMA) mixtures spontaneously self‐assemble into micron size spherical aggregates. ¹H NMR and FTIR studies confirmed that the self‐assembly process is driven in all cases via H‐bond formation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4805–4818, 2005     

Synthesis of poly(chloromethylstyrene‐b‐styrene) block copolymers by controlled free‐radical polymerization

The controlled free‐radical polymerization of styrene and chloromethylstyrene monomers in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxyl (TEMPO) has been studied with the aim of synthesizing block copolymers with well‐defined structures. First, TEMPO‐capped poly(chloromethylstyrene) was prepared. Among several initiating systems [self‐initiation, dicumyl peroxide, and 2,2′‐azobis(isobutyronitrile)], the last offered the best compromise for obtaining a good control of the polymerization and a fast polymerization rate. The rate of the TEMPO‐mediated polymerization of chloromethylstyrene was independent of the initial concentration of TEMPO but unexpectedly higher than the rate of the thermal self‐initiated polymerization of chloromethylstyrene. Transfer reactions to the chloromethyl groups were thought to play an important role in the polymerization kinetics and the polydispersity index of the resulting poly(chloromethylstyrene). Second, this first block was used as a macroinitiator in the polymerization of styrene to obtain the desired poly(chloromethylstyrene‐b‐styrene) block copolymer. The kinetic modeling of the block copolymerization was in good agreement with experimental data. The block copolymers obtained in this work exhibited a low polydispersity index (weight‐average molecular weight/number‐average molecular weight < 1.5) and could be chemically modified with nucleophilic substitution reactions on the benzylic site, opening the way to a great variety of architectures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3845–3854, 2000     

Hyperbranched fluorocopolymers by atom transfer radical self‐condensing vinyl copolymerization

Hyperbranched fluorocopolymers were synthesized by the atom transfer radical self‐condensing vinyl copolymerization (ATR–SCVCP) of an inimer, either p‐chloromethylstyrene (CMS) or p‐bromomethylstyrene (BMS), with 2,3,4,5,6‐pentafluorostyrene (PFS), with 2,2′‐bipyridine together with CuCl or CuBr as the ligand/catalyst system. The reaction conditions were studied to provide for control over the copolymer compositions, molecular weights, degrees of branching, and properties, as characterized by ¹H, ¹³C, and ¹⁹F NMR spectroscopy, gel permeation chromatography, elemental analysis, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and solubility tests. Copolymers having number‐average molecular weights from 2.9 to 260 kDa and polydispersities (weight‐average molecular weight/number‐average molecular weight) from 1.8 to 4.8 were obtained. The molar fractions of PFS units increased with increases in the feed ratio of PFS to the inimer. The degrees of branching were typically about 30% with the feed of 1.0 or 2.0 equiv of PFS with respect to the inimer, although slight variations could be achieved through the variation of the inimer composition. Under similar reaction conditions with CuCl as the catalyst, ATR–SCVCP of BMS with PFS led to higher degrees of branching than ATR–SCVCP of CMS with PFS. Solubility tests indicated that the polymers prepared under conditions that avoided extensive biradical coupling were soluble in a broad range of organic solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4754–4770, 2005     

Synthesis and characterization of thiophene‐substituted N‐phenyl maleimide polymers by photoinduced radical polymerization

Two types of novel functionalized N‐[4‐(4′‐hydroxyphenyloxycarbonyl)phenyl]maleimide and N‐(4‐{[2‐(3‐thienyl)acetyl]oxyphenyl}oxycarbonylphenyl)maleimide (MIThi) were synthesized starting from 4‐maleimido benzoic acid. Photoinduced radical homopolymerization of MIThi and its copolymerization with styrene were performed at room temperature to give linear polymers containing pendant thienyl moieties using ω,ω‐dimethoxy‐ω‐phenylacetophenone as an initiator. Copolymers' compositions and the equilibrium constant (K) for electron donor–acceptor complex formation suggest an alternating nature of the copolymerization. The monomer reactivity ratios and Alfrey–Price Q,e values were also determined. The thermal behavior of the new synthesized monomers and polymers was investigated by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 995–1004, 2002     

Synthesis of C60 end‐capped polymers from azide functional polystyrene via atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) was performed to prepare azide end‐functional polystyrene (PSt‐N₃) with predesigned molecular weight and narrow polydispersity. Then C₆₀ end‐capped polystyrene was synthesized by reacting C₆₀ with PSt‐N₃. The UV‐VIS, DSC, GPC characterizations indicated that C₆₀ was chemically bonded to the end of polystyrene chain, and the brown powder products, which can be dissolved in THF, CHCl₃, DMF, and so forth, were monoadditional and diadditional according to C₆₀. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4519–4523, 2000     

Synthesis of poly(vinyl acetate)‐graft‐polystyrene by a combination of cobalt‐mediated radical polymerization and atom transfer radical polymerization

Vinyl acetate and vinyl chloroacetate were copolymerized in the presence of a bis(trifluoro‐2,4‐pentanedionato)cobalt(II) complex and 2,2′‐azobis(4‐methoxy‐2,4‐dimethylvaleronitrile) at 30 °C, forming a cobalt‐capped poly(vinyl acetate‐co‐vinyl chloroacetate). The addition of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy after a certain degree of copolymerization was reached afforded 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐terminated poly(vinyl acetate‐co‐vinyl chloroacetate) (PVOAc–MI; number‐average molecular weight = 31,000, weight‐average molecular weight/number‐average molecular weight = 1.24). A ¹H NMR study of the resulting PVOAc–MI revealed quantitative terminal 2,2,6,6‐tetramethyl‐1‐piperidinyloxy functionality and the presence of 5.5 mol % vinyl chloroacetate in the copolymer. The atom transfer radical polymerization (ATRP) of styrene (St) was studied with ethyl chloroacetate as a model initiator and five different Cu‐based catalysts. Catalysts with bis(2‐pyridylmethyl)octadecylamine (BPMODA) or tris(2‐pyridylmethyl)amine (TPMA) ligands provided the highest initiation efficiency and best control over the polymerization of St. The grafting‐from ATRP of St from PVOAc–MI catalyzed by copper complexes with BPMODA or TPMA ligands provided poly(vinyl acetate)‐graft‐polystyrene copolymers with relatively high polydispersity (>1.5) because of intermolecular coupling between growing polystyrene (PSt) grafts. After the hydrolysis of the graft copolymers, the cleaved PSt side chains had a monomodal molecular weight distribution with some tailing toward the lower number‐average molecular weight region because of termination. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 447–459, 2007     

Synthesis of functional polyethylene graft copolymers by nitroxide‐mediated living radical polymerization

This paper describes a new method to prepare graft copolymers, such as polyethylene‐g‐polystyrene (PE‐g‐PS), with a relatively well‐controlled reaction mechanism. The chemistry involves a transformation process from the metallocene copolymerization of ethylene and m,p‐methylstyrene (m,p‐MS) to nitroxide‐mediated “living” free radical polymerization (LRFP) of styrene. The metallocene catalysis produces ethylene‐co‐m,p‐methylstyrene (EMS) random copolymers. Next, 1‐hydroxyl‐2,2,6,6‐tetramethylpiperidine (HO‐TEMPO) was synthesized by the reduction of TEMPO with sodium ascorbate. The macroinitiator (EMS‐TEMPO) was synthesized with the bromination reaction of EMS, and the following nucleofilic reaction with this functional nitroxyl compound. The resulting macroinitiator (EMS‐TEMPO) for LRFP was then heated in the presence of styrene to form graft copolymer. DSC, ¹H‐NMR, FTIR spectroscopy were employed to investigate the structure of the polymers. The results of Molau test showed that PE‐g‐PS could be a potential good compatilizer. Copyright © 2008 John Wiley & Sons, Ltd.     

From metal‐catalyzed radical telomerization to metal‐catalyzed radical polymerization of vinyl chloride: Toward living radical polymerization of vinyl chloride

The metal‐catalyzed radical polymerization of vinyl chloride (VC) in ortho‐dichlorobenzene initiated with various activated halides, such as α,α‐dihaloalkanes, α,α,α‐trihaloalkanes, perfloroalkyl halides, benzyl halides, pseudohalides, allyl halides, sulfonyl halides, α‐haloesters, α‐halonitriles, and imidyl halides, in the presence of Cu(0)/2,2′‐bipyridine, Fe(0)/o‐phenantroline, TiCp₂Cl₂, and other metal catalysts is reported. The formation of the monoadduct between the initiator and VC was achieved with all catalysts. However, propagation was observed only for metals in their zero oxidation state because they were able to reinitiate from geminal dihalo or allylic chloride structures. Poly(vinyl chloride) with molecular weights larger then the theoretical limit allowed by chain transfer to VC were obtained even at 130 °C. In addition, the most elemental features of a living radical polymerization, such as a linear dependence of the molecular weight and a decrease of polydispersity with conversion, were observed for the most promising systems based on iodine‐containing initiators and Cu(0), that is, I? CH₂? Ph? CH₂? I/Cu(0)/bpy (where bpy = 2,2′‐bipyridyl), at 130 °C. However, because of the formation of inactive species via chain transfer to VC and other side reactions, the observed conversions were in most cases lower than 40%. A mechanistic interpretation of the chain transfer to monomer in the presence of Cu species is proposed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3392–3418, 2001