Effects of monomer structure on the morphology of polymer networks and the electro-optical properties of polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) films were prepared by photochemical polymerisation with a series of (meth)acrylate monomers. The effects of monomer structure on the morphology of polymer networks in the PDLC films were studied. The acrylate monomers without sidegroup chain formed uniform polymer networks. The methacrylate monomers with methyl as their sidegroup chains formed lace-like networks. The size of the LC droplets increased with increasing the length of the flexible chain of both methacrylate and acrylate monomers. Meanwhile, the effects of the morphology of the polymer network on the electro-optical properties of PDLC films were also investigated.     

In Situ Semibatch Emulsion Polymerization of 2‐Ethyl Hexyl Acrylate/n‐Butyl Acrylate/Methyl Methacrylate/Cellulose Nanocrystal Nanocomposites for Adhesive Applications

Cellulose nanocrystals (CNCs) are safe, “green,” hydrophilic nanoparticles. CNCs are added in situ during a semibatch 2‐ethyl hexyl acrylate (EHA)/n‐butyl acrylate (BA)/methyl methacrylate (MMA) emulsion polymerization. As EHA is a more hydrophobic monomer, manipulation of the monomer feed composition allows for the evaluation of the effect of hydrophobicity on CNC distribution in the nanocomposite and ultimately on adhesive properties. The adhesive properties (loop tack, peel strength, and shear strength) of three different EHA/BA/MMA latex formulations are shown to simultaneously improve with increasing CNC loading. However, the hydrophobicity of the EHA leads to a nonuniform distribution of CNCs in the latex films. Comparison of the in situ polymerized nanocomposites to their blended counterparts is also made.     

Modification of porous suspension‐PVC particles by stabilizer‐free aqueous dispersion polymerization of absorbed acrylate monomers

The present study describes modification of porous PVC particles by polymerization of a monomer/crosslinker/peroxide solution absorbed within the PVC particles. The modifying crosslinked polymers include butyl acrylate (BA) crosslinked with ethylene glycol dimethacrylate (EGDMA) and ethylhexyl acrylate (EHA) crosslinked with EGDMA. The monomer solution is blended with the PVC particles by dry‐blending. The monomer absorbed particles are then polymerized in a stabilizer‐free aqueous dispersion‐polymerization. The modified semi‐IPN PVC particles have better stability than the neat PVC particles in packed columns for absorption of halo‐organics from water, etc. The modified semi‐IPN PVC particles are melt processable and thus have the potential of being interesting and useful modified rigid PVC materials. The modified PVC particles characterization includes polymerization yield, non‐extractables and porosity measurements and also morphology and dynamic mechanical behavior (DMTA). PBA and PEHA polymerization has shown high yield levels. The high conversion of BA and EHA within the particle, is partly due to their low solubility in water. The levels of non‐extractable fractions found are indicative of low chemical interaction between the polyacrylate/PVC phases in the particle. The modified PVC particle's porosity levels indicate that BA and EHA partly polymerize within the PVC particles' bulk and partly in the pores as crusts covering the PVC pore surfaces. This finding is supported by SEM observations of unetched and etched freeze fractured surfaces. Higher crosslinking levels of the polyacrylate modification promote compatibility with the PVC particles' bulk. DMTA measurements show two loss modulus peaks for the 0.5%EGDMA blends in the glass transition temperature region, suggesting imcompatibility. However, at 5%EGDMA a single transition is found exhibiting enhanced compatibility owing to the high degree of crosslinking, which prevents phase separation. Copyright © 2002 John Wiley & Sons, Ltd.     

Influence of hydrophobic monomers on secondary nucleation of hydroxyl‐functionalized latexes

The influence of butyl acrylate (BA) and methyl methacrylate (MMA) on hydroxyl functionalized latexes was investigated. The hydrophobicity of the monomer feed was varied via the BA/MMA ratio. In addition to monitoring the effect of hydrophobic monomer feed on secondary nucleation, the polymerization kinetics and final latex properties were also obtained for comparison. Five different BA to MMA molar ratios were combined with five 2‐hydroxyethyl methacrylate (HEMA) concentrations (0, 10, 20, 30 and 40 mol% in monomer composition). All latexes were synthesized through seeded semibatch emulsion polymerization process. Particle size distributions and average particle sizes of the latexes were determined by dynamic light scattering (DLS) and qualitatively compared with transmission electron microscope (TEM) images. The BA to MMA ratio significantly influences the boundary HEMA concentration at which homogeneous secondary nucleation occurs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2190–2202     

醇溶性聚丙烯酸酯乳液的合成及性能研究

以丙烯酸乙酯(EA)、甲基丙烯酸甲酯(MMA)和甲基丙烯酸(MAA)为主单体,采用过硫酸盐作引发剂,经预乳化乳液聚合工艺合成了聚丙烯酸酯乳液.讨论了乳化剂种类、单体种类以及功能性单体、引发剂加入工艺对乳液聚合过程及乳液产品性能的影响.结果表明:单体组成为m(MMA)∶m(EA)∶m(MAA)=45∶40∶15所得乳液聚合物能满足使用性能要求;种子引发剂加入质量控制在单体总质量的0.3%,而总的引发剂用量占单体总质量的0.8%较适宜.用差热分析仪和凝胶渗透色谱仪对乳液聚合物进行了表征.     

Atom transfer radical polymerization of n‐butyl acrylate catalyzed by CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine

The homogeneous atom transfer radical polymerization (ATRP) of n‐butyl acrylate with CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine as a catalyst and ethyl 2‐bromoisobutyrate as an initiator was investigated. The kinetic plots of ln([M]₀/[M]) versus the reaction time for the ATRP systems in different solvents such as toluene, anisole, N,N‐dimethylformamide, and 1‐butanol were linear throughout the reactions, and the experimental molecular weights increased linearly with increasing monomer conversion and were very close to the theoretical values. These, together with the relatively narrow molecular weight distributions (polydispersity index ～ 1.40 in most cases with monomer conversion > 50%), indicated that the polymerization was living and controlled. Toluene appeared to be the best solvent for the studied ATRP system in terms of the polymerization rate and molecular weight distribution among the solvents used. The polymerization showed zero order with respect to both the initiator and the catalyst, probably because of the presence of a self‐regulation process at the beginning of the reaction. The reaction temperature had a positive effect on the polymerization rate, and the optimum reaction temperature was found to be 100 °C. An apparent enthalpy of activation of 81.2 kJ/mol was determined for the ATRP of n‐butyl acrylate, corresponding to an enthalpy of equilibrium of 63.6 kJ/mol. An apparent enthalpy of activation of 52.8 kJ/mol was also obtained for the ATRP of methyl methacrylate under similar reaction conditions. Moreover, the CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine‐based system was proven to be applicable to living block copolymerization and living random copolymerization of n‐butyl acrylate with methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3549–3561, 2002     

Influence of Particle Nucleation in Pressure Sensitive Adhesive Properties: Miniemulsion versus Emulsion Polymerization

Miniemulsion polymerization is a promising approach to produce and tailor pressure sensitive adhesives (PSAs). In this paper, a systematic comparison of the adhesive properties of latexes produced by miniemulsion and conventional emulsion polymerization is presented. Specifically, the influence of the total surfactant concentration, chain transfer agent concentration and chemical composition on the final adhesive properties of the polymer 2-ethyl hexyl acrylate/methyl methacrylate/acrylic acid was discerned using a 2³ factorial design for each polymerization method. In addition to the adhesive properties (i.e., loop tack, peel strength and shear strength), molecular weight distribution, particle size distribution (PSD) and glass transition temperature were analyzed. The results show that under the conditions used in this work, it is possible to produce PSAs using miniemulsion polymerization, a process wherein monomer droplet nucleation is the dominant particle nucleation mechanism. The use of a miniemulsion polymerization process, as opposed to the conventional emulsion technique, produced several differences such as larger particles sizes and narrower molecular weight distributions. Focusing on the PSA films that exhibited adhesive rather than cohesive failure, the PSA films generated via miniemulsion polymerization displayed higher values of loop tack and peel strength compared to those produced via conventional emulsion polymerization. Shear strength results were strongly dependent on the amount of gel content and sol molecular weight for both cases.     

Emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate and methyl methacrylate

The emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate (EHMA) and methyl methacrylate (MMA) was carried out with the bifunctional initiator 1,4‐butylene glycol di(2‐bromoisobutyrate). The system was mediated by copper bromide/4,4′‐dinonyl‐2,2′‐bipyridyl and stabilized by polyoxyethylene sorbitan monooleate. The effects of the initiator concentration and temperature profile on the polymerization kinetics and latex stability were systematically examined. Both EHMA homopolymerization and successive copolymerization with MMA proceeded in a living manner and gave good control over the polymer molecular weights. The polymer molecular weights increased linearly with the monomer conversion with polydispersities lower than 1.2. A low‐temperature prepolymerization step was found to be helpful in stabilizing the latex systems, whereas further polymerization at an elevated temperature ensured high conversion rates. The EHMA polymers were effective as macroinitiators for initiating the block polymerization of MMA. Triblock poly(methyl methacrylate–2‐ethylhexyl methacrylate–methyl methacrylate) samples with various block lengths were synthesized. The MMA and EHMA reactivity ratios determined by a nonlinear least‐square method were ～0.903 and ～0.930, respectively, at 70 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1914–1925, 2006     

Photocurable and thermally stable polymers based on 1,4‐pentadien‐3‐one‐1‐p‐hydroxyphenyl‐5‐p‐phenyl methacrylate: Copolymerization with ethyl acrylate

1,4‐Pentadien‐3‐one‐1,5‐bis(p‐hydroxyphenyl) (PBHP) was prepared by reacting p‐hydroxybenzaldehyde and acetone in the presence of an acid catalyst. 1,4‐Pentadiene‐3‐one‐1‐p‐hydroxyphenyl‐5‐p‐phenyl methacrylate (PHPPMA) monomer was prepared by reacting PBHP dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in the presence of triethylamine. A free‐radical solution polymerization technique was used for synthesizing homo‐ and copolymers of different feed compositions of PHPPMA and ethyl acrylate (EA) in EMK as a solvent with benzoyl peroxide as a free‐radical initiator at 70 ± 1 °C. All the polymers were characterized with IR and ¹H NMR techniques. The compositions of the copolymers were determined with the ¹H NMR technique. The copolymer reactivity ratios were evolved with Kelen–Tudos (EA = 1.25 and PHPPMA = 0.09) and extended Kelen–Tudos (EA = 1.30 and PHPPMA = 0.09) methods. Q (0.48) and e (1.68) values for the new monomer (PHPPMA) were calculated with the Alfrey–Price method. UV absorption spectra for poly(PHPPMA) showed two absorption bands at 302 and 315 nm. The photocrosslinking properties of the polymer samples were examined with the solvent method. Thermal analyses of the polymers were performed with the thermogravimetric‐differential thermogravimetric technique. First, the decomposition temperatures started for poly(PHPPMA), copoly(EA‐PHPPMA) (62:38), and copoly(EA‐PHPPMA) (41:59) were at 350, 410, and 417 °C, respectively. A gel permeation chromatographic method was used for determining the polymer molecular weights (weight‐average molecular weight: 2.67 × 10⁴ and number‐average molecular weight: 1.41 × 10⁴) and polydispersity index (1.89). The solubility of the monomer and the copolymers occurred at 30 °C with solvents having different polarities. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1632–1640, 2003     

Reversible addition–fragmentation chain transfer polymerization of 2‐naphthyl acrylate with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate as a chain‐transfer agent

The reversible addition–fragmentation chain transfer (RAFT) polymerizations of 2‐naphthyl acrylate (2NA) initiated by 2,2′‐azobisisobutyronitrile were investigated with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as a RAFT agent at various temperatures in a benzene solution. The results of the polymerizations showed that 2NA could be polymerized in a controlled way by RAFT polymerization with CPDN as a RAFT agent; the polymerization rate was first‐order with respect to the monomer concentration, and the molecular weight increased linearly with the monomer conversion. The polydispersities of the polymer were relatively low up to high conversions in all cases. The chain‐extension reactions of poly(2‐naphthyl acrylate) (P2NA) with methyl methacrylate and styrene successfully yielded poly(2‐naphthyl acrylate)‐b‐poly(methyl methacrylate) and poly(2‐naphthyl acrylate)‐b‐polystyrene block polymers, respectively, with narrow polydispersities. The P2NA obtained by RAFT polymerization had a strong ultraviolet absorption at 270 nm, and the molecular weights had no apparent effect on the ultraviolet absorption intensities; however, the fluorescence intensity of P2NA increased as the molecular weight increased and was higher than that of 2NA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2632–2642, 2005     

Organic gels prepared from side‐chain liquid crystalline polymers without the spacer

A series of side‐chain liquid crystal polymers (SCLCPs) without the spacer, named poly[ω‐(4′‐n‐alkyl oxybiphenyl‐4‐oxy)methacrylate (PMBiCm, m = 1, 2, 4, 6, 8, 10, 12, 14, 16, and 18), have been synthesized. The novel polymer organogels were prepared by introducing PMBiCm into common organic solvents. Solubility and gel properties of polymer organogelators differ widely according to the nature of the solvents. In aromatic solvents, PMBiCm completely dissolved in solvent due to good compatibility between biphenyl mesogen group and aromatic solvents. Poly[ω‐(4′‐n‐alkyl oxybiphenyl‐4‐oxy)methacrylate were still insoluble in polar solvents such as acetone, ethanol, DMF, ethylene glycol, and n‐butanol. This behavior resulted from mismatch of solubility parameter between PMBiCm and solvent. Considering the factors of solvent, we have systematically studied 3 organic solvents with different polarities (butyl acetate, n‐butyl amine, and n‐heptane). It is found that the length of the alkoxy tail chain of the SCLCPs has significant influence on gelability and gel thermal stability. In further studies discussed by UV‐Vis spectroscopy, the results revealed that the π‐π stacking interaction of the biphenyl mesogens might be the key factor for guiding the self‐assembly processes and the polymer gel formation. This work is useful to comprehending physical mechanism of polymer organogels. Meanwhile, those expand SCLCPs to a wide range of applications.     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] by incorporation of carbon dioxide into epoxide polymer and the miscibility behavior of its blends with poly(methyl methacrylate) or poly(vinyl chloride)

This study was related to the investigation of the chemical fixation of carbon dioxide to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer‐to‐polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] [poly(DOMA‐co‐EA)] from poly(glycidyl methacrylate‐co‐ethyl acrylate) [poly(GMA‐co‐EA)] and CO₂, quaternary ammonium salts showed good catalytic activity. The films of poly(DOMA‐co‐EA) with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) blends were cast from N,N′‐dimethylformamide solution. The miscibility of the blends of poly(DOMA‐co‐EA) with PMMA or PVC have been investigated both by DSC and visual inspection of the blends. The optical clarity test and DSC analysis showed that poly(DOMA‐co‐EA) containing blends were miscible over the whole composition range. The miscibility behaviors were discussed in terms of Fourier transform infrared spectra and interaction parameters based on the binary interaction model. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1472–1480, 2001     

Preparation of amphiphilic statistical copolymers of 2‐hydroxyethyl methacrylate with 2‐diethylaminoethyl methacrylate,precursors of water‐soluble copolymers

Statistical copolymers of 2‐hydroxyethyl methacrylate (HEMA) and 2‐diethylaminoethyl methacrylate (DEA) were synthesized at 50 °C by free‐radical copolymerization in bulk and in a 3 mol L^?1 N,N′‐dimethylformamide solution with 2,2′‐azobisisobutyronitrile as an initiator. The solvent effect on the apparent monomer reactivity ratios was attributed to the different aggregation states of HEMA monomer in the different solvents. The copolymers obtained were water‐insoluble at a neutral pH but soluble in an acidic medium when the molar fraction of the DEA content was higher than 0.5. The quaternization of DEA residues increased the hydrophilic character of the copolymers, and they became water‐soluble at a neutral pH when the HEMA content was lower than 0.25. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2427–2434, 2002     

Fundamental studies of grafting reactions in free radical copolymerization. II. Grafting of styrene,acrylate, and methacrylate monomers onto cis-polybutadiene using AIBN initiator in solution polymerization

Grafting can be initiated by primary and/ or polymer radical attack on the backbone polymer and it is well known that AIBN does not readily promote grafting, even when using poly-butadiene. We have studied the grafting of several different monomers onto cis-polybuta-diene using AIBN initiator and find dramatically different results among the monomers. As expected, styrene grafts at very low levels due to the inactivity of the initiator radicals and the polystyryl radicals. Methacrylate monomer grafts at a slightly higher level due to its more reactive polymer radical, while acrylate monomer readily grafts onto the poly-butadiene because polyacrylate radicals are quite reactive. The use of a kinetic model allowed the evaluation of rate coefficients for graft site initiation to be in the relative order of 0.1 : 1.0 : 10.0 (L/mol/s) for styrene:methacrylate:acrylate monomers. The model also pro-vided successful interpretations of the grafting data and its dependence upon the concen-trations of monomer, initiator, and backbone polymer. Due to the relatively higher reactivity of the polyacrylate radicals, the benzene solvent acted as a chain transfer agent in this system. This affected the molecular weight of both free and grafted acrylate polymer and also surpressed the graft level. Polyacrylate radicals attack the cis-polybutadiene backbone by abstracting an allylic hydrogen and also adding across the residual double bond. The latter mechanism is responsible for the majority of the grafting; the hydrogen abstraction leads to relatively inactive radicals which cause a retardation in the overall reaction rate. © 1995 John Wiley & Sons, Inc.     

End‐linked amphiphilic polymer conetworks: Synthesis by sequential atom transfer radical polymerization and swelling characterization

Conetworks based on end‐linked homopolymers and amphiphilic gradient copolymers were synthesized by the atom transfer radical polymerization (ATRP) of 2‐(dimethylamino)ethyl methacrylate (DMAEMA, hydrophilic monomer), methyl methacrylate (MMA, hydrophobic monomer), and ethylene glycol dimethacrylate (EGDMA, hydrophobic cross‐linker). Sequential, rather than step‐wise polymerizations, were performed to enhance the livingness of the polymerization, particularly for the end‐linking step, and to ultimately obtain conetworks based on gradient rather than pure block copolymers. Amphiphilic conetworks based on end‐linked MMA‐DMAEMA‐MMA gradient copolymers of different compositions were successfully synthesized as confirmed by the narrow molecular weight distributions of the linear precursors, the rigidity of the amphiphilic conetwork products and the low sol‐fraction extracted from the conetworks. Similarly successful was the ATRP synthesis of an end‐linked conetwork based on a DMAEMA‐MMA statistical copolymer and of a randomly cross‐linked conetwork that resulted from the simultaneous terpolymerization of DMAEMA, MMA and EGDMA. An amphiphilic conetwork based on an end‐linked DMAEMA‐MMA‐DMAEMA gradient copolymer presented a less rigid, mucous‐like, texture. The degrees of swelling (DS) in tetrahydrofuran of all the conetworks were higher than those measured in pure water, whereas the aqueous DS values increased by lowering the pH and increasing the DMAEMA content of the conetworks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1878–1886, 2010     

Synthesis,Characterization, and Photocrosslinking Properties of Poly(4‐Methacrylamidophenyl‐2′,3′‐benzostyryl Ketone)

Abstract

A new methacrylamide monomer, 4‐methacrylamidophenyl‐2′,3′‐benzostyryl ketone (MPBSK) having a free‐radical polymerizable group and a photocrosslinkable functional group, was synthesized by reacting 4‐(2′,3′‐benzocinnamoyl)aniline with methacryloyl chloride in the presence of triethyl amine. The monomer, MPBSK was polymerized in methyl ethyl ketone (MEK) at 70°C using benzoyl peroxide (BPO) as the initiator. The polymer was characterized by UV, IR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. The polymer was found to be soluble in several polar aprotic solvents and in chlorinated solvents but insoluble in aliphatic and aromatic hydrocarbons and in alcohols. The molecular weight data of the polymer as obtained from gel permeation chromatography suggests a higher tendency for chain termination by disproportionation than dimerization. The glass transition temperature of the polymer was determined by differential scanning calorimetry. Thermogravimetric analysis of the polymer carried out in air reveals that it possesses good thermal stability required of a negative photoresist. The photocrosslinking property of the polymer was investigated by irradiating the polymer solution with UV light in the presence and absence of triplet photosensitizers. The effect of the solvent on the rate of photocrosslinking of the polymer was also studied.     

Improvements in morphological and electro‐optical properties of polymer‐dispersed liquid crystal grating using a highly fluorine‐substituted acrylate monomer

To improve the morphological and electro‐optical properties of a polymer‐dispersed liquid crystal (PDLC) grating, a type of highly fluorine‐substituted acrylate monomer was added to the prepolymer mixture. The morphologies of the PDLC gratings were investigated using atom force microscopy and scanning electron microscopy. The grating had a very clear polymer/LC interface after addition of 3.9 wt % of fluorine‐substituted monomer. The LC droplets in this case were much larger than the sample without fluorinated monomer. This phenomenon indicated that an almost complete phase separation had occurred. However, as the content of fluorine‐substituted monomer increased, the morphologies of gratings became less defined and the volumes of LC droplets were smaller. The diffraction efficiency (DE) decreased with increasing of fluoride content and the V ₉₀ increased simultaneously, which may be ascribed to the blurry interface and the small LC droplets. The highest DE (90%) and lowest V ₉₀ (70 V) were obtained simultaneously under the condition of 3.9 wt % fluoride added in the prepolymer. In addition, it was also found that the fluorine‐substituted monomer may disorder the alignment of LCs in the grating.     

Polyhydroxy and polyethyleneglycol (meth)acrylate polymers: physical properties and general studies for their use as electrophoresis matrices.

A new series of materials have been tested for their suitability as electrophoresis matrices. The mechanical and optical properties of gels composed of polyethyleneglycol (meth)acrylate esters or polyhydroxy (meth)acrylate esters in water and in various concentrations of organic solvents are described. Several crosslinkers including polyethyleneglycol and polyhydroxy di(meth)acrylates, piperazine diacrylate, and bisacrylamide were used in these studies. Electrophoretic migration and separation of a series of protein standards through polyethyleneglycol methacrylate (PEGM) 200, PEGM 400, and glyceryl methacrylate is demonstrated. Further, copolymerization of all of the monomers with acrylamide was performed and the distribution of monomer incorporation into the polymer network calculated. All monomers and copolymers that were examined by IR spectroscopy showed greater than 99% polymerization. These results justify their further study for biomolecule separations.     

Fundamental studies of grafting reactions in free radical copolymerization. IV. Grafting of styrene,acrylate, and methacrylate monomers onto vinyl-polybutadiene using benzoyl peroxide and AIBN initiators in solution polymerization.

Vinyl-1,2 polybutadiene (vinyl-PBD) was used as the backbone polymer for the grafting of styrene, methacrylate, and acrylate monomers using both benzoyl peroxide and AIBN initiators. Radical attack on the backbone can occur through the pendant vinyl group or at the tertiary, allylic hydrogen site. Effective graft sites are formed via double bond addition of either primary (initiator) or polymer radicals. The production of tertiary allylic radicals on the backbone chain also occurs and results in moderate to dramatic reaction rate re-tardation in every monomer system. The type of initiator is only important when the polymer radicals are not very reactive, as in the case of styrene, and to a lesser extent for methacrylate monomer. Graft efficiencies are generally higher when using vinyl-PBD than when using cis-PBD. © 1995 John Wiley & Sons, Inc.