Polyaniline thin film optical waveguides for integrated optics and VLSI prepared by vacuum evaporation technique

Polyaniline is emerging as an important polymer material which offers challenging opportunities for both fundamental research and new technological applications in waveguides. Metal doped polyaniline has been prepared initially in the form of powder by a solution growth technique. The emeraldine salt with doped metal was also prepared by solution growth technique. This powder was used for vacuum evaporation on optically flat glass substrate. The dark green doped (Fe, Al) polyaniline thin films were prepared by vacuum evaporation technique (10^?4 torr). Deposited waveguide thin films have been characterized structurally, using X‐ray diffraction (XRD), optically etc. Effective refractive index of the thin film waveguide was also calculated theoretically and experimentally. Waveguide parameters, namely refractive index, propagation loss and depth of vacuum deposited polyaniline thin films optical waveguide have been determined. The optical spectra and structure and waveguide parameters of vacuum deposited polyaniline thin films are strongly affected by the type of doping. It is possible to reduce the losses by addition of Fe to the vacuum deposited polyanine thin film and modify the effective refractive index (O_eff) according to particular requirements. Results are compared with the results in the literature. Copyright © 2002 John Wiley & Sons, Ltd.     

Solution characterization of the novel organometallic polymer poly(ferrocenyldimethylsilane)

A series of four well‐defined poly(ferrocenyldimethylsilane) (PFS) samples spanning a molecular weight range of approximately 10,000–100,000 g mol⁻¹ was synthesized by the living anionic polymerization of dimethyl[1]silaferrocenophane initiated with n‐BuLi. The polymers possessed narrow polydispersities and were used to characterize the solution behavior of PFS in tetrahydrofuran (THF). The weight‐average molecular weights (M_w ) of the polymers were determined by low‐angle laser light scattering (LALLS), conventional gel permeation chromatography (GPC), and GPC equipped with a triple detector (refractive index, light scattering, and viscosity). The molecular weight calculated by conventional GPC, with polystyrene standards, underestimated the true value in comparison with LALLS and GPC with the triple detection system. The Mark–Houwink parameter a for PFS in THF was 0.62 (k = 2.5 × 10⁻⁴), which is indicative of fairly marginal polymer–solvent interactions. The scaling exponent between the radius of gyration and M_w was 0.54, also consistent with marginal polymer–solvent interactions for PFS in THF. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3032–3041, 2000     

Effect of the degree of deacetylation and the substitution of carboxymethyl chitosan on its aggregation behavior

The aggregation behavior of carboxymethyl chitosan (CM‐chitosan) with various degrees of deacetylation (DD) and substitution (DS) was characterized with viscometry, gel permeation chromatography (GPC), and GPC coupled with laser light scattering (GPC‐LLS). The results indicate that CM‐chitosan has a strong tendency to form aggregates in aqueous solution and the aggregation behavior depends on DD and DS values. The apparent aggregation number (N_ap), the gyration radius (R_g), and the weight fraction of the aggregates (F_a) reached maximum at a DD value of 50%, then decreased, with the DD value deviating from 50%. A higher DS value helped to form aggregates; when the DS value increased from 0.65 to above 1.0, N_ap and R_g increased sharply. The dependence of the refractive index increment (dn/dc) on the DD and DS values was related to variation of the charge density and the hydrophobic interaction along the molecular chains. The conformations of CM‐chitosan aggregates were studied by the LLS method. The aggregates showed a spherical shape, and the chain stiffness increased with introduction of the acetyl groups. The DS value had no clear influence on the chain conformation that was observed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 296–305, 2005     

Effects of the thermal history and concentration on the aggregation of Erwinia gum in an aqueous solution

The aggregation of Erwinia (E) gum in a 0.2 M NaCl aqueous solution was investigated by multi‐angle laser light scattering and gel permeation chromatography (GPC) combined with light scattering. The GPC chromatograms of five fractions contained two peaks; the fractions had the same elution volume but different peak areas, suggesting that aggregates and single chains coexisted in the solution at 25 °C. The apparent weight‐average molecular weights (M_w) of the aggregates and single chains for each fraction were all about 2.1 × 10⁶ and 7.8 × 10⁴, respectively. This indicates that the aggregates were composed of about 27 molecules of E gum in the concentration range used (1.0 × 10⁻⁶ to 5.0 × 10⁻⁴ g/mL). The weight fraction of the aggregates (w_ag) increased with increasing concentration, but the aggregates still existed even in an extremely dilute solution. The fractionation process and polymer concentration hardly affected the apparent aggregation number but significantly changed w_ag. The E‐gum M_w decreased sharply with an increase in temperature. When the E‐gum solution was kept at 100 °C, w_ag decreased sharply for 20 h and leveled off after 100 h. Once the aggregates were decomposed at a higher temperature, no aggregation was observed in the solution at 25 °C, indicating that the aggregation was irreversible. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1352–1358, 2000     

Template‐free anion‐controlled synthesis of Pd (II) nano‐aggregates for the antifouling polymerization of CO and ethylene

The reaction of [(domppp) Pd (OAc)₂] [domppp = 1,3‐bis (di‐o‐methoxyphenylphosphino)propane] and imidazolium‐functionalized carboxylic acids containing various anions (Br^?, PF₆^?, SbF₆^? and BF₄^?) resulted in the formation of nano‐sized Pd (II) aggregates under template‐free conditions. The rate of formation of aggregates can be modulated by changing the anion, affecting the rate of polymerization of CO and olefins without fouling. Herein, we describe the analysis of Pd (II) catalysts by dynamic light scattering, atomic force microscopy, X‐ray photoelectron spectroscopy and X‐ray crystallography, and co‐ and terpolymerization results including the catalytic activity, and bulk density and molecular weight of polymers.     

The Impact of Aggregation on the Photophysics of Spiro‐Bridged Heterotriangulenes

We report on the impact of the central heteroatom on structural, electronic, and spectroscopic properties of a series of spirofluorene‐bridged heterotriangulenes and provide a detailed study on their aggregates. The in‐depth analysis of their molecular structure by NMR spectroscopy and X‐ray crystallography was further complemented by density functional theory calculations. With the aid of extensive photophysical analysis the complex fluorescence spectra were deconvoluted showing contributions from the peripheral fluorenes and the heteroaromatic cores. Beyond the molecular scale, we examined the aggregation behavior of these heterotriangulenes in THF/H₂O mixtures and analyzed the aggregates by static and dynamic light scattering. The excited‐state interactions within the aggregates were found to be similar to those found in the solid state. A plethora of morphologies and superstructures were observed by scanning electron microscopy of drop‐casted dispersions.     

Polyaniline dispersions 10. Coloured microparticles of variable density prepared using stabilizer mixtures

Green polyaniline microparticles of variable density were prepared by the dispersion polymerization of aniline in the presence of a mixture of steric stabilizers. A water-soluble polymer stabilizer, polyacrylamide, and a particulate one, colloidal silica, were jointly used for this purpose. Silica was preferentially incorporated into the dispersion particles. The size of the particles was determined by dynamic light scattering. The colour of the polyaniline colloids was characterized by the absorption spectra. The density of the particles increased with increasing silica content, while the conductivity of the composites prepared from dispersions was reduced at the same time. Received: 19 November 1999/Accepted: 15 February 2000     

Size-exclusion chromatography of perfluorosulfonated ionomers

A size-exclusion chromatography (SEC) method in N,N-dimethylformamide containing 0.1 M LiNO₃ is shown to be suitable for the determination of molar mass distributions of three classes of perfluorosulfonated ionomers, including Nafion^®. Autoclaving sample preparation is optimized to prepare molecular solutions free of aggregates, and a solvent exchange method concentrates the autoclaved samples to enable the use of molar-mass-sensitive detection. Calibration curves obtained from light scattering and viscometry detection suggest minor variation in the specific refractive index increment across the molecular size distributions, which introduces inaccuracies in the calculation of local absolute molar masses and intrinsic viscosities. Conformation plots that combine apparent molar masses from light scattering detection with apparent intrinsic viscosities from viscometry detection partially compensate for the variations in refractive index increment. The conformation plots are consistent with compact polymer conformations, and they provide Mark–Houwink–Sakurada constants that can be used to calculate molar mass distributions without molar-mass-sensitive detection. Unperturbed dimensions and characteristic ratios calculated from viscosity–molar mass relationships indicate unusually free rotation of the perfluoroalkane backbones and may suggest limitations to applying two-parameter excluded volume theories for these ionomers.     

Association of hydrophobically α,ω‐end‐capped poly(2‐methyl‐2‐oxazoline) in water

The α,ω‐end‐capped poly(2‐methyl‐2‐oxazoline) (C_n‐POXZ‐C_n) have been synthesized by a one‐pot process using cationic ring‐opening polymerization with an appropriate initiator and terminating agent. The polymers bearing different alkyl groups C₁₂ and C₁₈ have molecular weight in the range of 2.4 × 10³ to 14 × 10³ with a small polydispersity index. The solution behavior of the free chains has been analyzed in a nonselective solvent, dichloromethane, by small‐angle neutron scattering and dynamic light scattering. These amphiphilic polymers associate in water to form flower‐like micellar structures. Critical micelle concentrations, investigated by fluorescence technique, are in the range of 0.03–0.5 g L^?1 and are dependent on the hydrophilic/lipophilic balance. The structural properties of the aggregates have also been investigated by viscometry. Intrinsic viscosities of these polymers are in the same range as that of the precursors poly(2‐methyl‐2‐oxazoline) (POXZ) and mono‐functionalized polymers. Large viscosity increase corresponding to intermicellar bridging was observed in the vicinity of the micelle overlap concentration. Addition of hydroxypropyl β‐cyclodextrin (HβCD) has dissociated the aggregates and the intrinsic viscosities of the HβCD‐end‐capped chains have become comparable with the ones of POXZ precursor chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2477–2485, 2010     

Molecular characterization of branched polysaccharides from Tremella fuciformis by asymmetrical flow field‐flow fractionation and size exclusion chromatography

To accurately characterize branched polysaccharides with high molecular weights from medicinal and edible mushrooms and identify the limitations of size exclusion chromatography, molecular characteristics of polysaccharides from Tremella fuciformis were determined and compared by asymmetrical flow field‐flow fractionation coupled with multiangle laser light scattering and refractive index detection, and size exclusion chromatography coupled with multiangle laser light scattering and refractive index detection, respectively. Results showed that molecular weights of three batches of T. fuciformis polysaccharides were determined as 2.167 × 10⁶ (TF1), 2.334 × 10⁶ (TF2), and 2.435 × 10⁶ Da (TF3) by size exclusion chromatography, and 3.432 × 10⁶ (TF1), 3.739 × 10⁶ (TF2), and 3.742 × 10⁶ Da (TF3) by asymmetrical flow field‐flow fractionation, as well as 3.469 × 10⁶ Da (TF1) by off‐line multiangle laser light scattering, respectively. Results suggested that size exclusion chromatography was unable to accurately characterize T. fuciformis polysaccharides, which may be due to its limitations such as shear degradation and abnormal coelution. Compared to size exclusion chromatography, asymmetrical flow field‐flow fractionation could be a better technique for the molecular characterization of branched polysaccharides with high molecular weights from medicinal and edible mushrooms, as well as from other natural resources.     

Resonance Scattering Spectral Determination of HSA with a New Scattering Enhanced Reagent of K_3[Fe(CN)_6]

Ｐｒｏｔｅｉｎｄｅｔｅｒｍｉｎａｔｉｏｎｉｓｖｅｒｙｉｍｐｏｒｔａｎｔｔｏｂｉｏｃｈｅｍ ｉｓｔｒｙａｎｄｂｉｏａｎａｌｙｔｉｃａｌｃｈｅｍｉｓｔｒｙ ,ａｎｄａｎａｎａｌｙｔｉｃａｌｉｔｅｍｏｆｑｕａｌｉｔｙｃｏｎｔｒｏｌｓｉｎｔｈｅｓｅｐａｒａｔｉｏｎｏｒｐｕｒｉｆｉｃａｔｉｏｎｏｆｂｉｏ ｌｏｇｉｃａｌａｎｄｃｈｅｍｉｃａｌｐｈａｒｍａｃｅｕｔｉｃａｌｓａｎｄｔｈａｔｏｆｆｏｏｄｅｘ ａｍｉｎａｔｉｏｎ .Ｃｏｍｐａｒｅｄｗｉｔｈｃｏｍｍｏｎｓｐｅｃｔｒｏｐｈｏｔｏｍｅｔｒｉｃｍｅｔｈｏｄｓｕｃ…     

Synthesis of amphiphilic block copolymer consisting of glycopolymer and poly(l‐lactide) and preparation of sugar‐coated polymer aggregates

The block glycopolymer, poly(2‐(α‐d ‐mannopyranosyloxy)ethyl methacrylate)‐b‐poly(l ‐lactide) (PManEMA‐b‐PLLA), was synthesized via a coupling approach. PLLA having an ethynyl group was successfully synthesized via ring‐opening polymerization using 2‐propyn‐1‐ol as an initiator. The ethynyl functionality of the resulting polymer was confirmed by MALDI‐TOF mass spectroscopy. In contrast, PManEMA having an azide group was prepared via AGET ATRP using 2‐azidopropyl 2‐bromo‐2‐methylpropanoate as an initiator. The azide functionality of the resulting polymer was confirmed by IR spectroscopy. The Cu(I)‐catalyzed 1,3‐dipolar cycloaddition between PLLA and PManEMA was performed to afford PManEMA‐b‐PLLA. The block structure was confirmed by ¹H NMR spectroscopy and size exclusion chromatography. The aggregating properties of the block glycopolymer, PManEMA_16k‐b‐PLLA_6.4k (M _n,PManEMA = 16,000, M _n,PLLA = 6400) was examined by ¹H NMR spectroscopy, fluorometry using pyrene, and dynamic light scattering. The block glycopolymer formed complicated aggregates at concentrations above 21 mg·L^?1 in water. The d ‐mannose presenting property of the aggregates was also characterized by turbidimetric assay using concanavalin A. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 395–403     

Structural characterization of a vegetable oil‐based polyol through liquid chromatography multistage mass spectrometry

A commercial vegetable oil‐based polyol for rigid polyurethane foams has been characterized by liquid chromatography‐electrospray ionization‐quadrupole ion trap mass spectrometry (LC‐ESI‐QIT‐MS). The absolute molecular weight (MW = 960) was measured by gel permeation chromatography (GPC) equipped with both refractive index (RI) detector and static laser light‐scattering detector (SLSD), which allowed further analysis by LC‐MS. The oligo‐polyol mixture was first separated in two elutes and then investigated by a deep multistage mass spectrometry (MSⁿ) study and completed using NMR. The major constituents identified were regioisomers of propoxylated sucrose (n_PO = 6–12), and the related esters of C16:0, C18:1, and C18:2 fatty acids had a mass ratio of 6:3:1. A comparison of fatty acids composition between the sample and palm oil demonstrated that the sample was initially prepared from the mixture of sucrose and palm oil by direct propoxylation. The MSⁿ fragmentation studies validated the structure of propoxylated sucrose and the related fatty acids derivatives. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 255–262     

Specifics of light scattering in solutions of fullerene-containing polymers

The molecular mass and hydrodynamic dimensions of molecules of two fullerene-containing polymers which differ in the preparation procedure and the mode of fullerene C₆₀ binding were determined by means of static and dynamic light scattering and transport techniques (diffusion, sedimentation, gel permeation chromatography). It was established that the molecular masses of polymeric C₆₀ derivatives determined by means of static light scattering are substantially above those measured by means of the transport techniques. Using as an example a polystyrene specimen containing 6.2 wt % C₆₀ prepared according to the widespread technique of solvent evaporation from a mutual fullerene and polymer solution, it was shown that the multicomponent nature, the compositional inhomogeneity, and a lack of coincidence in the signs of refractive index increments for structurally different components of fullerene-containing polymers may cause anomalies in the intensity of light scattering by solutions of these compounds.     

Spectral characteristics of aqueous dispersions enriched in oxygen

The IR absorption and reflection spectra of aqueous dispersions consisting of (H₂O)_n, O₂(H₂O)_n, and (O₂)₂(H₂O)_n clusters (10 ≤ n ≤ 50) were calculated by the method of molecular dynamics using a flexible model of molecules. The frequency distribution of the power scattered by the cluster systems was obtained in the range 0 ≤ ω ≤ 3000 cm^?1. The capture of one oxygen molecule by the clusters is accompanied by a decrease in the absorption of the low-frequency IR radiation and by a peak of the absorption intensity in the vicinity of ω 2704 cm^?1. This is also accompanied by a decrease in the reflection coefficient throughout the frequency range and a decrease in the emission power at ω < 1030 and ω > 1700 cm^?1. Addition of two oxygen molecules to the clusters decreases the capability of the dispersions for the absorption, reflection, and scattering of IR radiation.     

Synthesis and nonlinear optical properties of side chain liquid crystalline polymers containing azobenzene push–pull chromophores

Azobenzene monomeric precursors bearing piperazine as donor moiety with different withdrawing groups and derived side chain polymethacrylates have been prepared and characterized. Monomers having terminal cyano or nitro groups, and the corresponding polymers, exhibited smectic A phases. Linear and nonlinear optical properties of every monomer and thin films of the cyano polymer ( pol‐PZ‐CN ) have been also studied. UV‐vis spectroscopy revealed out‐of‐plane orientation in the as prepared films, as confirmed by waveguide refractive index measurements. Moreover, absorption spectra indicated the presence of azo aggregates in these films. The initial molecular arrangement has been modified by applying thermal annealing within the mesophase range and UV‐blue irradiation. Although thermal annealing resulted in a significant amplification of the out‐of‐plane optical anisotropy due to thermotropic self‐organization of side chain azo moieties, irradiation with 440 nm light induced some disruption of aggregates. The nonlinear optical response of Corona poled films has been studied by second harmonic generation measurements, and the influence of the molecular arrangement on the nonlinear d_ij coefficients has been analyzed. The more efficient poling corresponded to preirradiated films. In any case, a noticeable degree of polar order (70% of the initial d₃₃ value) remained for several months after the poling in films kept at RT. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 232–242, 2010     

Anionic polymerization of styrenic macromonomers of polyisoprene,polybutadiene, and polystyrene

Anionic polymerization and high‐vacuum techniques were used to prepare a series of well‐defined polyisoprene, polybutadiene, and polystyrene polymacromonomers. The procedure involved (1) the synthesis of styrenic macromonomers in benzene by the selective reaction of the corresponding macroanion with the chlorine of 4‐(chlorodimethylsilyl)styrene (CDMSS) and (2) the in situ anionic polymerization of the macromonomer without previous isolation. The synthesis of the macromonomers [polyisoprene macromonomer: 11 samples, weight‐average molecular weight (M_w) = 1000–18,000; polybutadiene macromonomer: 5 samples, M_w = 2000–4000; and polystyrene macromonomer: 2 samples, M_w = 1300 and 3600] was monitored by size exclusion chromatography with refractive index/ultraviolet detectors. Selectivity studies with CDMSS indicated that polybutadienyllithum had the highest selectivity, and polystryryllithium the lowest. From kinetic studies it was concluded that the polymerization half‐life times were longer but comparable to those of styrene, and they appeared to only slightly depend on the molecular weight of the macromonomer chain (at least for low degrees of polymerization of the polymacromonomer and for M_w < 7000 for the macromonomer side chain). Dependence on the polymerization degree of the polymacromonomer product was also observed. All the prepared polymacromonomers were characterized by size exclusion chromatography with refractive index, ultraviolet and two‐angle laser light scattering detectors, and NMR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1038–1048, 2005     

Synthesis and characterization of polyaniline nanoparticles in phosphonic acid amphiphile aqueous micellar solutions for waterborne corrosion protection coatings

Polyaniline (PANI) dispersions consisting of 270 to 380 nm sized particles were prepared by oxidation with ammonium peroxydisulfate (APS) in n‐decylphosphonic acid (DPA) micellar solutions. The green dispersions do not undergo macroscopic precipitation for more than a year. The synthesized DPA doped PANI exhibited enhanced electrical conductivity (3.6 S cm^?1 ) compared with DPA‐PANI (2.3 x 10 ^{? 4} S cm ^{? 1}) prepared by postsynthesis treatment of the PANI‐base with DPA. It was shown that through protonation with decylphosphonic acid, polyaniline showed a significantly enhanced solubility in common organic solvents like chloroform, xylene, etc. The synthesized PANI was characterized by intrinsic viscosity, solubility, FT‐IR , conductivity, SEM , and TGA measurements. The wide‐angle X ‐ray diffraction study revealed the appearance of a peak located at low angles (d = 29.4 – 35.3 Å) suggesting the formation of layered structure of PANI backbone separated by long alkyl side chains of DPA. The anticorrosive performance of the bilayer coatings composed of a bottom layer of DPA doped polyaniline covered with a polyvinyl butyral topcoat, have been demonstrated for steel exposed to neutral saline solutions. It was found that the inhibitive properties of DPA dopant provides further protection to the base metal through smart release when damage is produced on the surface of the coating. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1606–1616     

Organoboronium amphiphilic block copolymers

A new class of amphiphilic organometallic block copolymers with cationic organoboron pendant groups was developed. Selective replacement of one of the bromine substitutents on each boryl group of the block copolymer PSBBr₂‐b‐PS with an organometallic reagent ArM (ArM = 2,4,6‐trimethylphenyl copper, 4‐t‐butylphenyltrimethyl tin) followed by treatment with 2,2′‐bipyridine gave the novel block copolymers [ 3Ar ](Br)_n as light yellow solid materials that show good stability in air and moisture and high solubility in most organic solvents. Their structure and composition were confirmed by multinuclear NMR, GPC, and elemental analysis. Highly regular micellar aggregates form in block‐selective solvents (e.g., MeOH, toluene) as demonstrated by ¹H NMR, dynamic light scattering, and transmission electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6612–6618, 2009