The behavior of the form factor in two dimensions for linear polymers in different regimes

Off-lattice Monte Carlo simulations employing the PIVOT algorithm are used to generate ideal and excluded volume linear polymers in two dimensions. The form factor at small and large wave vectors is calculated from the resulting configurations and compared to the exact equation for ideal chains and to both scaling and renormalization group predictions for excluded volume chains. It is found that using the des Cloizeaux form for the distance distribution function in an analytic calculation of the form factor leads to close agreement with the Monte Carlo data and that simple expressions for both the small and large wave vector expansions reproduce the essential features of the form factor.     

Relation between melting behavior and physical structure in polymers

The phenomenon of double melting, as manifested by two characteristic endotherms in the melting region on a differential thermal analysis (DTA) scan, has been studied in nylon 66 and polystyrene as a function of sample treatment by annealing or drawing. A variety of techniques were used in these studies including DTA, x-ray diffraction, electron microscopy, and mechanical testing. It is shown that the two endotherms are not caused by a bimodal crystal size distribution, by recrystallization, by orientation changes, or by phase changes. It is proposed that one endotherm is caused by the melting of foldedchain crystals, while the other is due to the melting of less perfect bundle crystals. This view is well supported by the results, especially by the DTA measurements made at different heating rates. Published data on the thermal behavior of annealed and drawn poly(ethylene terephthalate) and on polyethylene crystallized at various pressures may also be explained on this basis if it is allowed that in polyethylene the chains may be more extended.     

Phase behavior of PCBM blends with different conjugated polymers

In this work the phase behavior of [6,6]-phenyl C(61)-butyric acid methyl ester (PCBM) blends with different poly(phenylene vinylene) (PPV) samples is investigated by means of standard and modulated temperature differential scanning calorimetry (DSC and MTDSC) and rapid heat-cool calorimetry (RHC). The PPV conjugated polymers include poly(2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylene vinylene) (MDMO-PPV), High T(g)-PPV which is a copolymer, and poly((2-methoxy-5-phenethoxy)-1,4-phenylene vinylene) (MPE-PPV). Comparisons of these PPV:PCBM blends with regioregular poly(3-hexyl thiophene) (P3HT):PCBM blends are made to see the different component miscibilities among different blends. The occurrence of liquid-liquid phase separation in the molten state of MDMO-PPV:PCBM and High T(g)-PPV:PCBM blends is indicated by the coexistence of double glass transitions for blends with a PCBM weight fraction of around 80 wt%. This is in contrast to the P3HT:PCBM blends where no phase separation is observed. Due to its high cooling rate (about 2000 K min(-1)), RHC proves to be a useful tool to investigate the phase separation in PPV:PCBM blends through the glass transition of these crystallizable blends. P3HT is found to have much higher thermal stability than the PPV samples.     

Modeling the solid-like behavior of entangled polymer nanocomposites at low frequency regimes

A theory for the linear viscoelastic behavior of entangled polymeric liquids reinforced with non-aggregated colloidal nanoparticles is presented. Composites with low filler concentration and strong polymer-particle interaction are considered. A fraction of entangled chains is assumed to be reversibly adsorbed on the surface of fillers, due to the affinity between the polymer molecules in the matrix and dispersed filler particles. The relaxation of the system is analyzed by the combination of stress relaxation functions for free and adsorbed polymer chains. It is demonstrated that the emergence of solid-like behavior at low frequency regimes, is due to the significant slow down in relaxation of adsorbed chains. Fitting the model predictions with relevant experimental data indicates that while the effect of constraint release should be considered to obtain a reasonable estimation of neat polymer behavior, the linear combination of stress relaxation functions of free and adsorbed chains (i.e., no thermal constraint release) leads to a better agreement with experimental data of filled systems.     

Solution behavior of two liquid crystalline polymers of different architectures

Solutions of two different liquid crystalline polymers of high molecular weight are investigated by static and dynamic light scattering (LS), membrane osmometry and size-exclusion chromatography (SEC). Measurements in dilute solution in different solvents showed no specific behavior as formation of aggregates or chain stiffening. Large discrepancies between the LS results and the results from osmometry and SEC show that the latter methods are in the present cases not suitable for molecular weight determination. In semi-dilute solution the osmotic modulus and the time correlation function were studied. Behavior of flexible chains was observed. In one system a slight aggregation of small molecules onto longer chains was found causing less interpenetration of the chains in that solvent. At moderately high concentrations cluster formation was observed from i) a small angle excess scattering, ii) a downturn of the osmotic modulus, and iii) the appearance of a slow motion in the time-correlation function.     

Thermal behavior of carbon fiber precursor polymers with different stereoregularities

The effect of stereoregularity, in terms of isotactic triad content on the thermal behavior of carbon fiber precursor polymers synthesized through different polymerization routes such as solid state and radical solution polymerization techniques, was investigated by the thermogravimetric analysis and differential scanning calorimetric measurements. The isotactic contents of I-PAN and A-PAN were estimated with ¹³C NMR. The thermal cyclization reactions of atactic polyacrylonitrile (A-PAN) with low isotactic content (26.4–29.7 %) occurred at a lower temperature than that of isotactic polyacrylonitrile (I-PAN) with higher content (48.7–51.6 %). The percentage of mass loss observed in I-PAN was less as compared to A-PAN. The molecular mass characteristics of PAN obtained through solid state and radical solution polymerization were [M _n (10.2–14.3 × 10⁴), M _v (2.44–3.26 × 10⁵)] and [M _n (10.2–14.3 × 10⁴), M _v (2.29–2.74 × 10⁵)] Daltons (Da).     

Studies on the structure behavior of triphenyldichlorophosphorane in different solvents

Triphenyldichlorophosporane, which was prepared according to Appel reaction, was an efficient reagent for alkyl halide synthesis by virtue of having two replaceable groups on "pentavalent" phosphorus. The reaction of triphenylphosphine with hexachloroethane was investigated in different solvents and 31P NMR traced the processes of these reactions. As results, it was found that there was similar high coordinated phosphorus species formed in aromatic solvents and in ring ether type solvents, which had large 1J(P-C) (about 140 Hz) according to 13C NMR experiments. It is indicated that, for some solvent such as benzene or dioxane, solvent molecules might be locked in the high coordinated phosphorus compounds, which in turn would affect the triphenyl groups situated at the equatorial position.     

Transient behavior of entangled polymers at high shear rates

A new model is presented for describing the time-dependent flow of entangled polymer liquids at high shear rates. The results were obtained by extending the Doi and Edwards theory to include the effect of chain stretching. This nonlinear phenomenon is predicted to occur when the product of the shear rate and longitudinal relaxation time of the polymer exceeds one. If a constant-shear-rate flow is started under these conditions, it is shown that the shear stress and the normal stress are considerably larger than that predicted by the original reptation model. We also find that both of these stresses can pass through maxima before reaching a steady state and that the times required to reach these maxima are constants independent of the shear rate. In general the new model requires the numerical solution of coupled partial differential equations. However, at the highest shear rates where reptative relaxation is no longer important, an analytical solution for the stresses is found. The results obtained here are shown to agree well with experimental data and to be an improvement over a simpler model recently proposed.     

Comparative study on composition, structure, and adsorption behavior of activated carbons derived from different synthetic waste polymers

The composition, structure, and adsorption behavior of activated carbons (ACs) derived from three different types of waste polymers, i.e., tire rubber (TR), polyvinyl chloride (PVC), and polyethyleneterephtalate (PET), by KOH activation were compared. The AC derived from PET exhibited the largest surface area (2831 m(2)/g) and pore volume (1.68 cm(3)/g) due to the homogenous aromatic composition of PET. The AC derived from PVC exhibited relatively lower surface area (2666 m(2)/g) but more narrowed pore size distribution (2-3 nm). The complex composition and high ash content of tire particles resulted in AC product with significantly lower surface area (398.5 m(2)/g) and heterogeneous pore width. Adsorption data of methylene blue (MB) were fitted well by Langmuir equation, indicating monolayer coverage on the ACs. The high oxygen content of PET-derived AC heavily affected its adsorption to MB and iodine. Due to the remarkable surface area and highly mesoporous structures, ACs based on both PET and PVC exhibited much higher adsorption capacities than that of TR and commercial coal-based AC (F400). This study demonstrates that the properties of ACs are highly dependent on their starting polymers and the potential of converting synthetic polymer waste into effective adsorbents for environmental remediation and cleanup.     

Polymorphism and structure in different kinds of liquid crystal polymers and copolymers

We report a short outline of chain-conformation informations obtained by small angle neutron scattering (SANS) studies of different kinds of Liquid Crystalline Polymers (LCPs). We conclude that in the nematic phase the prolate shape of the chains are directly connected to the orientational order and the magnitude of the chain extension strongly depends on molecular parameters relative to the coupling mesogen-chain. The behavior is markedly different when the backbone anisotropy is oblate shape due to the chain confinement between the smectic layers.     

The canalicular structure of compact bone in the rat at different ages.

Osteocytes communicate through a canalicular system that maintains the vitality and mineral metabolism of bone. Casting the vascular canals and canaliculi of compact bone with methacrylate and viewing them with scanning electron microscopy shows their extent and relationships. Confocal laser scanning microscopy of the same specimen before corrosion establishes the degree of calcification of the different tissue components. These methods were used to compare basal with alveolar compact bone in the rat mandible at different ages. Sections of the mandibular molar region were placed in a methacrylate resin. After polymerization and study with confocal microscopy, the organic matrix was removed. Juvenile rats had large irregular central vascular canals and lacunae that were more concentric in the basal than the alveolar bone. Cast lacunae were round, and the canaliculi from these lacunae were short and thick in both bones. Adult rats had regular concentrically arranged lacunae in the basal bone. Cast lacunae were ellipsoid and flatter in the basal bone than in the alveolar bone. The intercommunicating canaliculi were increased and canaliculi had more branching than the juvenile rats. The aged rats had fewer vascular canals, lacunae, and canaliculi and had osteoporotic changes. The cast lacunae were slender and flat especially in the basal bone. The porosity of the mandible became more pronounced in the alveolar than in the basal bone with aging. The canaliculi of mandibular compact bone thinned and developed extensive branching with adulthood but decreased in size and number with advanced age. Lacunae proceed from the large circular structures of youth to the flat forms of the aged. These studies show that the internal structure of compact bone changes with age and mirrors its functional state.     

Phase behavior of blends of PCBM with amorphous polymers with different aromaticity

The phase behavior of [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) blends with amorphous polymers with different degrees of aromaticity has been investigated by differential scanning calorimetry (DSC) and small‐angle neutron scattering (SANS). The polymers investigated are the homologous series of polystyrene (PS), poly(2‐vinyl‐naphthalene) (P2VN), and poly(9‐vinyl‐phenanthrene) (P9VPh). The DSC results show that the miscibility of PCBM in these polymers increases nonlinearly from 16.5 wt % in PS, 57.0 wt % in P2VN, and 74.9 wt % in P9VPh. The SANS results show that at all concentrations of PCBM, the blends are composed of two mixed phases. Analysis shows that the phase dimensions remain largely independent of PCBM content, but there is a strong dependence of the PCBM concentration difference in the two phases with increasing PCBM content. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 994–1001     

Preliminary study of the retention behavior for different compounds using cryogenic chromatography at different initial temperatures

The Kováts indices (I) of 24 volatile organic compounds were measured at the different initial temperatures by a laboratory-made cryogenic chromatography. The results show that the correlations of the Kováts indices and the temperature are nonlinear at low initial temperature. Seven QSRR models were built using the heuristic method at different initial temperatures by calculating the quantitative chemical parameters of 24 organic compounds to study the relationship between the retention behavior and the molecular parameters. By studying the relationship between carbon and retention behavior, the capacity factor, and resolution of selected compounds, the contribution of gas–liquid interfacial adsorption process, which influences the retention behavior of solutes, is becoming more and more important with the decrease of the initial temperature.     

Thermal behavior of polyacrylonitrile polymers synthesized under different conditions and comonomer compositions

Polyacrylonitrile (PAN) polymers are used as precursors for carbon fiber production. This process requires an oxidative stabilization step, which can be studied by differential scanning calorimetry (DSC). In this sense, thermal behavior of PAN based terpolymers by different polymerization processes, compositions and itaconic acid concentrations in the reaction media were investigated. The obtained results showed that the addition of itaconic acid and methyl acrylate as comonomers resulted a lower heat flow during the process comparing to the PAN homopolymer. It suggested that these comonomers aid the oxidative stabilization stage for all studied process. The redox system polymerization at 40°C resulted in a lower heat flow. Itaconic acid decreases slightly initial and peak temperatures of the terpolymer and heat flow until concentration of 3y. The cyclization temperature decreases when MAis incorporated into the terpolymer compared to the MMA terpolymer and increases when MAA is the acidic monomer. Among terpolymers the AN/MA/AA polymer showed the best thermal behavior for carbon fiber producing.     

Dynamic behavior of flexible polymers at a solid/liquid interface

The mean time spent by a macromolecule at a solid/liquid interface is analyzed in the region of adsorption saturation. The method consists of carrying out preliminary adsorption with radioactively labeled high-molecular-weight polyacrylamide and subsequently exposing the surface to a solution of unlabeled polyacrylamide. It was found that, apart from a small fraction of polymers “loosely” attached, the exchange between labeled and unlabeled polymers takes place at the interface at a very slow rate. Furthermore, desorption of surface molecules occurs only in the presence of a solution, and then the rate of desorption increases proportionally to the number of molecules in the solution. A mechanism based on a bimolecular chemical exchange process is proposed.     

模型炭催化加氢气化反应特性研究

在加压热天平中研究了活性炭/烟煤半焦/无烟煤半焦等模型炭催化加氢气化(CHG)的特性,并结合GC、BET等表征对炭的物理结构和化学反应过程的分析,初步获悉了Co对炭-氢反应的催化作用过程.结果表明,炭CHG过程中过渡金属(Fe、Co、Ni)的催化活性明显高于碱金属和碱土金属(K、CaO、MgO),过渡金属催化过程存在低...     

The effects of abrasive particles on the electrochemical behavior of adrenaline at different electrodes

Cyclic voltammetry (CV), double-potential step chronocoulometry (DPSCC), and electrochemical impedance spectroscopy (EIS) techniques have been performed to study the effects of abrasive particles on the electrochemical reaction of adrenaline at glassy carbon electrode (GCE) and platinum electrode in 0.5 mol/L H₂SO₄ solution. For the electrochemical reaction of adrenaline, it was shown that abrasive particles have a more marked electrocatalytic effect at GCE compared to that at platinum electrode. The electrocatalytic effect of SiC coated GCE is more obvious comparing to that of Al₂O₃ coated GCE. With the coarse degree of the abrasive paper increasing, the peak current (i _p) increases significantly and the peak-to-peak potential separation (ΔE _p) changes a little at the pretreated GCE. The electron transfer process of adrenaline at the different pretreated GCE is controlled by the diffusion in this system.