Molecular orbital study of the Q–e scheme in free radical copolymerization

Molecular orbital calculations were used to study free radical polymerization. Calculations show that the monomer is activated during the reaction and the pi bond becomes a diradical. The radical on the carbon that is about to form the new bond is called the e radical in this article. The other is the Q radical. For different monomers it is shown indirectly that changes in the energies of formation of the Q and e radicals are related to changes in the Q and e terms in the empirical Q–e scheme of Alfrey and Price. The polar effect in the Q–e scheme involves the e-radical, unpaired electron density. Specifically, the Q–e sum (e_x + e_y) is correlated with the e radical spin density. Also the e term is correlated with the electron density on the unsubstituted carbon of the monomer. The relationship of the Q radical to the adjacent substituent is shown by correlating ln Q values with the energy of addition of a hydrogen atom to a monomer. These relationships give theoretical meaning to the Q–e terms and allow calculation of Q and e values from molecular orbital properties for small monomers.     

Polymerization of vinyl monomers photoinitiated by p‐nitroaniline: Photoinitiation mechanism

The polymerization rate of methyl methacrylate photoinitiated by p‐nitroacetanilide in the presence of triethylamine was measured as a function of the amine concentration in different media. The polymerization is more efficient in nonpolar medium (benzene/monomer). ESR studies show the formation of a nitro and an amino free radical, which are formed by photoinduced proton transfer from the amine to the nitro group. The amine radical is the active species that adds to the monomer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2269–2273, 2000     

Synthesis of polymers by template polymerization. I. Template polymerization of poly(methacrylic acid) with β‐cyclodextrin

A novel template monomer with multiple methacryloyl groups was synthesized with β‐cyclodextrin by the acetylation of primary hydroxyl groups and the esterification of secondary hydroxyl groups with methacrylic acid anhydride. The average number of methacryloyl groups in the monomer was 11. The radical polymerization of the monomer was carried out with the following initiators: α,α′‐azobisisobutylonitrile, H₂O₂? Fe²⁺ redox initiator, p‐xylyl‐N,N‐dimethyldithiocarbamate (XDC), and α‐bromo‐p‐xylyl‐N,N‐dimethyldithiocarbamate (BXDC). When the concentration of the monomer was less than 4.12 × 10^?3 M, polymerization was limited inside the molecule, and gelation of the system was hindered. For controlled radical photopolymerization with XDC and BXDC, the methacryloyl groups of the monomer were homogeneously polymerized, and poly(methacrylic acid) with a narrow molecular weight distribution was obtained by the hydrolysis of the polymerized products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3539–3546, 2001     

Stereospecific living radical polymerization for simultaneous control of molecular weight and tacticity

The simultaneous control of the molecular weights and the tacticity was attained even during radical polymerization by the judicious combinations of the living/controlled radical polymerizations based on the fast interconversion between the dormant and active species, and the stereospecific radical polymerizations mediated by the added Lewis acids or polar solvents via the coordination to the monomer/polymer terminal substituents. This can be useful for various monomers including not only conjugated monomers, such as acrylamides and methacrylates, but also nonconjugated ones such as vinyl acetate and N‐vinylpyrrolidone. Stereoblock polymers were easily obtained by the addition of the Lewis acids or by change of the solvents during the living radical polymerizations. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6147–6158, 2006     

Graft copolymers having hydrophobic backbone and hydrophilic branches. XXX. Preparation of polystyrene‐core nanospheres having a poly(2‐methacryloyloxyethyl phosphorylcholine) corona

Polystyrene core nanosphere particles possessing 2‐methacryloyloxyethyl phosphorylcholine (MPC) polymers on the corona were prepared by the free radical polymerization of hydrophilic polyMPC macromonomer and hydrophobic styrene with AIBN as a radical initiator in ethanol as a polar solvent. The morphology of the nanospheres was observed by transmission electron micrograph (TEM). The nanospheres were spherical in form and have a narrow size distribution. Their sizes could be controlled by varying the molecular weight of the macromonomer and the amount of it in feed. Electron spectroscopy for chemical analysis (ESCA) of the nanosphere surfaces suggested that polyMPC chains were located favorably on the surface of the nanosphere. The nanospheres having the polyMPC chains on their surfaces can be significant and useful materials in technological and medical fields. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3052–3058, 2000     

Investigation of the radical copolymerization and terpolymerization of maleic anhydride and norbornenes by an in situ 1H NMR analysis of kinetics and by the mercury method: Evidence for the lack of charge‐transfer‐complex propagation

The radical copolymerization of electron‐deficient maleic anhydride (MA) and electron‐rich norbornene (NB) derivatives with 2,2′‐azobis(isobutyronitrile) (AIBN) in dioxane‐d₈ has been monitored in situ by ¹H NMR spectroscopy with free induction decays recorded every 30 min at 60, 70, or 84 °C. The ratios of the monomer pairs were varied in some cases. The NB derivatives employed in this study included bicyclo[2.2.1]hept‐2‐ene (NB), t‐butyl 5‐norbornene‐2‐carboxylate, methyl 5‐norbornene‐2‐methyl‐2‐carboxylate, and ethyl tetracyclo[4.4.0.1^2,5.1^7,10]dodec‐3‐ene‐8‐carboxylate. Decomposition of AIBN, consumption of the monomers, feed ratios, endo/exo ratios, copolymer compositions, and copolymer yields were studied as a function of polymerization time. Furthermore, a homopolymerizable third monomer (t‐butyl methacrylate, methacrylic acid, t‐butyl acrylate, or acrylic acid) was added to the NB/MA 1/1 system, revealing that the methacrylic monomer polymerizes rapidly in the early stage and that the ratio of MA to NB in the terpolymer strongly deviates from 1/1. In contrast, however, the acrylic monomers are more uniformly incorporated into the polymer. Nevertheless, these studies indicate that MA and NB do not always behave as a pair in radical polymerization and disproves the commonly believed charge‐transfer mechanism. Electron‐deficient fumaronitrile was also included in the kinetics study. To further understand the copolymerization mechanism, MA and NB were competitively reacted with a cyclohexyl radical generated by the treatment of cyclohexylmercuric chloride with sodium borohydride (mercury method). A gas chromatographic analysis of the reaction mixtures has revealed that a cyclohexyl radical reacts with MA almost exclusively in competition and that the cyclohexyl adduct of MA essentially accounts for all the products in a mass balance experiment, eliminating a possibility of the formation of an adduct involving the MA–NB charge‐transfer complex. Thus, the participation of a charge‐transfer complex in the copolymerization of MA and NB cannot be important. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3521–3542, 2000     

Penultimate unit effects in the free‐radical copolymerization of styrene with acrylonitrile according to theoretical thermochemistry

Penultimate unit effects in the free‐radical copolymerization of styrene with acrylonitrile were investigated by the consideration of the theoretical thermochemistry of three subsequent propagation steps in the copolymerization process at 298 K and the electronic properties of the relevant reactants. The total energies, zero‐point energies incorporating a 0.96 scale factor, and thermal enthalpy corrections for all optimized structures were computed with the B3LYP density functional theory and the 6‐311G(d,p) basis set. The penultimate unit effect on the enthalpy of reaction for elementary propagation reactions ranged from ?1.2 to 2.7 kcal/mol. The enthalpies of elementary copolymerization propagation reactions showed that penultimate unit effects depended not only on the γ substituent itself but also on the terminal unit of the growing radical and the monomer being attached. The exothermicity of the addition of radicals, varying in the penultimate unit for a given monomer, was lower for more polar radicals and smaller Mulliken charges at the radical atom, except for radicals with a CN substituent placed in the γ position when they reacted with acrylonitrile. For the latter system, the repulsive interactions between the CN substituent and nitrile group of the monomer being added contributed to the reaction enthalpy. Almost no penultimate unit effect was detected upon spin distribution at the radical atom, and this probably indicated the absence of the independent implicit penultimate model. The results obtained strengthen the concept of the inseparability of implicit and explicit penultimate unit effects in radical copolymerization. However, it appears that for the styrene–acrylonitrile copolymerization system, the explicit penultimate model prevails over the implicit penultimate model. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3592–3603, 2002     

Synthesis of optically active poly(N‐propargylsulfamides) with helical conformation

A novel chiral N‐propargylsulfamide monomer ( 1a ) and its enantiomer ( 1b ) were synthesized and polymerized with (nbd)Rh⁺B^?(C₆H₅)₄ as a catalyst providing poly(1) (poly( 1a ) and poly( 1b )) in high yields (≥99%). Poly(1) could take stable helices in less polar solvents (chloroform and THF), demonstrated by strong circular dichroism signals and UV–vis absorption peaks at about 415 nm and the large specific rotations; but in more polar solvents including DMF and DMSO, poly(1) failed to form helix. Quantitative evaluation with anisotropy factor showed that the helical screw sense had a relatively high thermal stability. These results together with the IR spectra measured in solvents showed that hydrogen bonding between the neighboring sulfamide groups is one of the main driving forces for poly(1) to adopt stable helices. In addition, copolymerization of monomer 1a and monomer 2 was conducted, the solubility of poly(1) was improved drastically. However, the copolymerization had adverse effects on the formation of stable helices in the copolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 500–508, 2007     

Synthesis of a new monomer N′‐(β‐methacryloyloxyethyl)‐2‐pyrimidyl‐(p‐benzyloxycarbonyl)aminobenzenesulfonamide and its copolymerization with N‐phenyl maleimide

The new monomer N′‐(β‐methacryloyloxyethyl)‐2‐pyrimidyl‐(p‐benzyloxy‐ carbonyl)aminobenzenesulfonamide (MPBAS) (M₁) is synthesized using sulfadiazine as parent compound. It could be homopolymerized and copolymerized with N‐phenyl maleimide (NPMI) (M₂) by radical mechanism using AIBN as initiator at 60 °C in dimethylformamide. The new monomer MPBAS and polymers were identified by IR, element analysis and ¹H NMR in detail. The monomer reactivity ratios in copolymerization were determined by YBR method, and r₁ (MPBAS) = 2.39 ± 0.05, r₂ (NPMI) = 0.33 ± 0.02. In the presence of ammonium formate, benzyloxycarbonyl groups could be broken fluently from MPBAS segments of copolymer by catalytic transfer hydrogenation, and the copolymer with sulfadiazine side groups are recovered. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2548–2554, 2000     

Atom transfer radical polymerization of ionic liquid 2‐(1‐butylimidazolium‐3‐yl)ethyl methacrylate tetrafluoroborate

Polymeric forms of ionic liquids may have many potential applications because of their high thermal stability and ionic nature. They are generally synthesized by conventional free‐radical polymerization. Here we report a living/controlled free‐radical polymerization of an ionic liquid monomer, 2‐(1‐butylimidazolium‐3‐yl)ethyl methacrylate tetrafluoroborate (BIMT), via atom transfer radical polymerization. Copper bromide/bromide based initiator systems polymerized BIMT very quickly with little control because of fast activation but slow deactivation. With copper chloride as the catalyst and trichloroacetate, CCl₄, or ethyl α‐chlorophenylacetate as the initiator, BIMT was polymerized at 60 °C in acetonitrile with first‐order kinetics with respect to the monomer concentration. The molecular weight was linearly dependent on the conversion. The monomer concentration strongly affected the polymerization: a low monomer concentration caused the polymerization to be incomplete, probably because of catalyst disproportionation in polar solvents. The addition of a small amount of pyridine suppressed such disproportionation, but a further increase in the amount of pyridine greatly slowed the polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5794–5801, 2004     

Synthesis of poly(D,L‐lactic acid‐alt‐glycolic acid) from D,L‐3‐methylglycolide

D ,L ‐3‐Methylglycolide (MG) was synthesized via two step reactions with a good yield (42%). It was successfully polymerized in bulk with stannous octoate as a catalyst at 110 °C. The effects of the polymerization time and catalyst concentration on the molecular weight and monomer conversion were studied. Poly(D ,L ‐lactic acid‐co‐glycolic acid) (D ,L ‐PLGA50; 50/50 mol/mol) copolymers were successfully synthesized from the homopolymerization of MG with high polymerization rates and high monomer conversions under moderate polymerization conditions. ¹H NMR spectroscopy indicated that the bulk ring‐opening polymerization of MG conformed to the coordination–insertion mechanism. ¹³C NMR spectra of D ,L ‐PLGA50 copolymers obtained under different experimental conditions revealed that the copolymers had alternating structures of lactyl and glycolyl. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4179–4184, 2000     

Controlled/living free‐radical copolymerization of 4‐(azidocarbonyl) phenyl methacrylate with methyl acrylate under 60Co γ‐ray irradiation

A new vinyl acyl azide monomer, 4‐(azidocarbonyl) phenyl methacrylate, has been synthesized and characterized by NMR and FTIR spectroscopy. The thermal stability of the new monomer has been investigated with FTIR and thermal gravimetry/differential thermal analysis (TG/DTA), and the monomer has been demonstrated to be stable below 50 °C in the solid state. The copolymerizations of the new monomer with methyl acrylate have been carried out at room temperature under ⁶⁰Co γ‐ray irradiation in the presence of benzyl 1H‐imidazole‐1‐carbodithioate. The results show that the polymerizations bear all the characteristics of controlled/living free‐radical polymerizations, such as the molecular weight increasing linearly with the monomer conversion, the molecular weight distribution being narrow (<1.20), and a linear relationship existing between ln([M]₀/[M]) and the polymerization time. The data from ¹H NMR and FTIR confirm that no change in the acyl azide groups has occurred in the polymerization process and that acyl azide copolymers have been obtained. The thermal stability of the polymers has also been investigated with TG/DTA and FTIR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2609–2616, 2007     

Preparation,characterization, and properties of fluorinated polyurethanes

Novel fluorinated polyurethanes (FPUs) were prepared by living radical polymerization of polyurethanes and hexafluorobutyl acrylate. The structures of the FPUs were characterized by FTIR, ¹H NMR, GPC, DSC, and XPS. The fluorinated polyurethane polymerization was investigated and showed monomer conversion, and molecular weight increased with increasing reaction time. In this way, the fluorine content in polyurethane could be easily adjusted by controlling the content of the fluorinated acrylate monomer. The mechanical evaluation shows that FPUs exhibit good mechanical properties. Morphology of FPU films was observed by scanning electron spectroscopy. The effects of the fluorine content on the surface properties and oxidative stability of FPUs were investigated. FPUs films were devoid of significant surface degradation after immersion in 20% H₂O₂ and 0.1 M CoCl₂ at 37 °C for 5 weeks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3248–3256, 2009     

Synthesis of double hydrophilic poly(ethylene oxide)‐b‐poly(2‐hydroxyethyl acrylate) by single‐electron transfer–living radical polymerization

In this study, the polymerization of (2‐hydroxyethyl) acrylate (HEA), in polar media, using Cu(0)‐mediated radical polymerization also called single‐electron transfer–living radical polymerization (SET‐LRP) is reported. The kinetics aspects of both the homopolymerization and the copolymerization from a poly(ethylene oxide) (PEO) macroinitiator were analyzed by ¹H NMR. The effects of both the ligand and the solvent were studied. The polymerization was shown to reach very high monomer conversions and to proceed in a well‐controlled fashion in the presence of tris[2‐(dimethylamino)ethyl]amine Me6‐TREN and N, N,N′, N″, N″‐pentamethyldiethylenetriamine (PMDETA) in dimethylsulfoxide (DMSO). SET‐LRP of HEA was also led in water, and it was shown to be faster than in DMSO. In pure water, Me₆‐TREN allowed a better control over the molar masses and polydispersity indices than PMDETA and TREN. Double hydrophilic PEO‐b‐PHEA block copolymers, exhibiting various PHEA block lengths up to 100 HEA units, were synthesized, in the same manner, from a bromide‐terminated PEO macroinitiator. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Interpretation of reactivity in radical polymerization—Radicals,monomers, and transfer agents: Beyond the Q‐e scheme

50 years ago, Alfrey and Price advanced the Q‐e scheme for the interpretation of radical and monomer reactivity and the prediction of monomer reactivity ratios in radical copolymerization. Despite the early criticism of the scheme by Mayo and Walling, and its obvious fundamental shortcomings, it continues to be essentially the only such scheme in use today. However, the more soundly based Patterns of Reactivity Scheme, originally proposed in 1959, has recently been revised in such a way that it provides, in a simple way, far more accurate predictions of monomer reactivity ratios than does the Q‐e scheme. Moreover, it is equally applicable to the forecasting of chain‐transfer constants and to the understanding of the reactivity of initiator radicals. The history of investigations of radical, monomer, and transfer agent reactivity is reviewed here, including a summary of the Revised Patterns Scheme and its applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 113–126, 1999     

Kinetic study of free‐radical polymerization photoinitiated by cyanine‐borate salts. II.

A series of cyanine butyltriphenylborate salts were prepared and tested as initiators of free‐radical polymerization photoinitiated via a photoinduced electron‐transfer process. For the majority of the tested series, the highest rate of photoinitiated free‐radical polymerization was observed when sec‐butyl radicals were formed. Essentially, there was no influence of the quantum yield of the free‐radical formation on the rate of the free‐radical polymerization initiated by the cyanine‐borate salts. The experimental data revealed that the relationship between the rate of polymerization and the free energy change for the electron transfer displayed typical Marcus region kinetic behavior. The photoreduction of the cyanine butyltriphenylborate salts produced colorless products. The efficiency of the bleached‐dye formation had no effect on the overall efficiency of photoinitiated polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2365–2374, 2000     

Flexibilized styrene‐N‐substituted maleimide copolymers. I. Multiblock copolymers prepared from styrene‐maleimide telechelics and polytetrahydrofuran

Telechelic copolymers of styrene and different N‐substituted‐maleimides (SMIs) with a molecular weight of 2000–8000 g/mol were synthesized using the starved‐feed‐reactor technique and were nearly bifunctional when the monomer feed had a high styrene concentration. The COOH‐terminated rigid SMI blocks were polycondensated with OH‐terminated poly(tetrahydrofuran) (PTHF) blocks, with a molecular weight of 250–1000 g/mol, which are the flexible parts in the generated homogeneous multiblock copolymer. The entanglement density, which is closely related to the toughness of materials, increased in these flexible SMI copolymers (ν_e = 5.2 · 10²⁵ m⁻³) compared to the unflexibilized ones (ν_e = 2.4 · 10²⁵ m⁻³). The glass transition temperature of these flexibilized, single‐phase multiblock copolymers was still high enough to qualify them as engineering plastics. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3550–3557, 2000     

Influence of aggregate formation in the copolymerization of ethyl α‐hydroxymethylacrylate with methyl methacrylate

Ethyl α‐hydroxymethylacrylate was homopolymerized and copolymerized with methyl methacrylate in chlorobenzene and 1,4‐dioxane solutions at 50 °C with 1.5 × 10^?2 mol/L 2,2′‐azobisisobutyronitrile as an initiator and a global monomer concentration of 3.0 mol/L. The experiments showed differences in the calculated values of the monomer reactivity ratios in both solvents. The kinetic behavior was analyzed in terms of the implicit penultimate effect and the radical reactivity ratios. All the parameters were examined with respect to the aggregation ability of the ethyl α‐hydroxymethylacrylate monomer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4187–4195, 2005     

Asymmetric cyclopolymerization of N‐tert‐butyl‐N‐allylacrylamide in the presence of β‐cyclodextrin

The radical polymerization of N‐tert‐butyl‐N‐allylacrylamide (t‐BAA) was carried out in a dimethyl sulfoxide/H₂O mixture in the presence of β‐cyclodextrin (β‐CD). The polymerization proceeded with the complete cyclization of the t‐BAA unit and yielded optically active poly(t‐BAA). The IR spectrum of the obtained polymer showed that the cyclic structure in the polymer was a five‐membered ring. The optical activity of poly(t‐BAA) increased with an increasing molar ratio of β‐CD to the t‐BAA monomer. The interaction of β‐CD with t‐BAA was confirmed by ¹H NMR and ¹³C NMR analyses of the polymerization system. It is suggested that interaction of the t‐BAA monomer with the hydrophobic cavity of β‐CD plays an important role in the asymmetric cyclopolymerization of t‐BAA. The radical copolymerization of t‐BAA with styrene (St), methyl methacrylate, ethyl methacrylate, or benzyl methacrylate (BMA) also produced optically active copolymers with a cyclic structure from the t‐BAA unit. St and BMA carrying a phenyl group were predicted to compete with t‐BAA for interaction with β‐CD in the copolymerization system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2098–2105, 2000     

Probing the effects of π–π stacking on the controlled radical polymerization of styrene and fluorinated styrene

The addition of the π–π stacking agent octafluorotoluene (OFT) resulted in up to a 50% reduction in monomer conversion after 24 h for atom transfer radical polymerization (ATRP) reactions of styrene, when performed at 85 °C with 1 eq of OFT compared with styrene in the initial reaction mixture. Monitoring the progress showed that the ATRP of styrene in the presence of either OFT or hexafluorobenzene (HFB) maintained a linear relationship between monomer conversion and number average molecular weights, while showing a first order rate dependence on monomer. The effects of π–π stacking on the K_ATRP could be overcome by using adjusting the redox activity of the metal‐ligand complex while maintaining reaction temperatures of 85 °C. Further experiments showed that nitroxide‐mediated polymerizations of St were affected to an identical extent by the presence of the π–π stacking agent HFB. The ATRP of pentafluorostyrene (PFSt) in the presence of π–π stackers benzene or toluene showed an increase in monomer conversion compared with reactions in their absence, consistent with M_n π–π stacking increasing the stability of the active radical. Interactions between the π–π stacking agents OFT and HFB and the aromatic groups in the ATRP of St or PFSt were verified by ¹H NMR analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012