Determination of chain stiffness and polydispersity from static light-scattering

Chain stiffness is often difficult to distinguish from molecular polydisperity. Both effects cause a downturn of the angular dependence at large q² (q = (4π/λ)sin θ/2) in a Zimm plot. A quick estimation of polydisperity becomes possible from a bending rod (BR) plot in which lim (c → 0) qRθ/Kc is plotted against q(〈S²〉_z)^1/2 = u. Flexible and semiflexible chains show a maximum whose position is shifted from u_max = 1.41 for monodisperse chains towards larger values as polydispersity is increased, while simultaneously, the maximum height is lowered. Stiff chains display a constant plateau at large q, its value is πM_L where M_L is the linear mass density. Using Koyama's theory, the number of Kuhn segments can be determined from the ratio of the maximum height to the plateau height, if the polydispersity index z = (M_w/M_n ? 1)^?1 is known. Thus, if the weight-average molecular weight M_w, is known, the contour length L_w, the number of Kuhn segments (N_k)_w, the Kuhn segment length l_k and the polydispersity of the stiff chains can be determined. The influence of excluded volume is shown to have no effect on this set of data. The reliability of this set can be cross-checked with the mean-square radius of gyration 〈s²〉_z which can be calculated from the Benoit-Doty equation for polydisperse chains. Rigid and slightly bending rods exhibit no maximum in the BR plot, and the effect of polydispersity can no longer be distinguished from a slight flexibility if only static scattering techniques are applied.     

Rare‐earth‐metal‐initiated polymerizations of (meth)acrylates and block copolymerizations of olefins with polar monomers

The organo‐rare‐earth‐metal‐initiated living polymerization of methyl methacrylate (MMA) was first discovered in 1992 with (C₅Me₅)₂LnR (where R is H or Me and Ln is Sm, Yb, Y, or La) as an initiator. These polymerizations provided highly syndiotactic (>96%) poly(methyl methacrylate) (PMMA) with a high number‐average molecular weight (M_n > 1000 × 10³) and a very narrow molecular weight distribution [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) < 1.04] quantitatively in a short period. Bridged rare‐earth‐metallocene derivatives were used to perform the block copolymerization of ethylene or 1‐hexene with MMA, methyl acrylate, cyclic carbonate, or ?‐caprolactone in a voluntary ratio. Highly isotactic (97%), monodisperse, high molecular weight (M_n > 500 × 10³, M_w/M_n < 1.1) PMMA was first obtained in 1998 with [(Me₃Si)₃C]₂Yb. Stereocomplexes prepared by the mixing of the resulting syndiotactic and isotactic PMMA revealed improved physical properties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 1955–1959, 2001     

Scalings of fluorine‐containing polyimides in cyclopentanone

Eight 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride‐4,4′‐diamino‐3,3′‐dimethylbiphenyl (6FDA‐OTOL) fractions and seven 2,2′‐bis[4‐(3,4‐dicarboxyphenoxy) phenyl] propane dianhydride‐4,4′‐diamino‐3,3′‐dimethylbiphenyl (BISADA‐OTOL) fractions in cyclopentanone at 30 °C were characterized by a combination of viscometry and static and dynamic laser light scattering (LLS). In static LLS, the angular dependence of the absolute scattered intensity led to the weight‐average molar mass (M_w), the z‐average root mean square radius of gyration, and the second virial coefficient. In dynamic LLS, the Laplace inversion of each measured intensity–intensity time correlation function resulted in a corresponding translational diffusion coefficient distribution [G(D)]. The scalings of 〈D〉 (cm²/s) = 8.13 × 10⁻⁵ M_w^−0.47 and [η] (dL/g) = 2.36 × 10⁻³ M_w^0.54 for 6FDA‐OTOL and 〈D〉 (cm²/s) = 3.02 × 10⁻⁴ M_w^−0.60 and [η] (dL/g) = 2.32 × 10⁻³ M_w^0.53 for BISADA‐OTOL were established. With these scalings, we successfully converted each G(D) value into a corresponding molar mass distribution. At 30 °C, cyclopentanone is a good solvent for BISADA‐OTOL but a poor solvent for 6FDA‐OTOL; this can be attributed to an ether linkage in BISADA‐OTOL. Therefore, BISADA‐OTOL has a more extended chain conformation than 6FDA‐OTOL in cyclopentanone. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2077–2080, 2000     

The solution phase characterization of poly(ferrocenyldimethylsilane)s by small‐angle neutron scattering

A series of monodisperse (M_w/M_n < 1.1) poly(ferrocenyldimethylsilane)s was prepared with number‐averaged degrees of polymerization, 〈z〉_n, of 9, 33, 206, and 506 ( 2 – 5 , respectively), as determined by gel permeation chromatography (GPC). The polymers were studied by small‐angle neutron scattering (SANS) in solution with the aim of obtaining the radius of gyration, R_g, the weight‐averaged molecular weight, M_w, and the polydispersity index, M_w/M_n. Data were collected over the range 0.008 < Q/Å^?1 < 0.5 and for a series of concentrations (weight fraction, w = 0.0063, 0.0125, 0.025, and 0.05). The scattered intensity, I(Q), was fitted to a model based on a Schultz–Zimm distribution of isolated chains with excluded volume. A comparison of the molecular weight and size data determined by GPC and SANS indicated an acceptable agreement between the values for R_g, M_w and M_w/M_n. The results of this study demonstrate the potential utility of SANS to fully characterize metallopolymers, and other polymer systems where traditional methods cannot be applied. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4011–4020     

Hyperbranched polymers as scaffolds for multifunctional reversible addition–fragmentation chain‐transfer agents: A route to polystyrene‐core‐polyesters and polystyrene‐block‐poly(butyl acrylate)‐core‐polyesters

Polydisperse hyperbranched polyesters were modified for use as novel multifunctional reversible addition–fragmentation chain‐transfer (RAFT) agents. The polyester‐core‐based RAFT agents were subsequently employed to synthesize star polymers of n‐butyl acrylate and styrene with low polydispersity (polydispersity index < 1.3) in a living free‐radical process. Although the polyester‐core‐based RAFT agent mediated polymerization of n‐butyl acrylate displayed a linear evolution of the number‐average molecular weight (M_n) up to high monomer conversions (>70%) and molecular weights [M_n > 140,000 g mol^?1, linear poly(methyl methacrylate) equivalents)], the corresponding styrene‐based system reached a maximum molecular weight at low conversions (≈30%, M_n = 45,500 g mol^?1, linear polystyrene equivalents). The resulting star polymers were subsequently used as platforms for the preparation of star block copolymers of styrene and n‐butyl acrylate with a polyester core with low polydispersities (polydispersity index < 1.25). The generated polystyrene‐based star polymers were successfully cast into highly regular honeycomb‐structured microarrays. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3847–3861, 2003     

Novel,biodegradable, functional poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate bearing a pendent carboxylic group

Water‐soluble poly(ester‐carbonate) having pendent amino and carboxylic groups on the main‐chain carbon is reported for the first time. This article describes the melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) with 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) at a wide range of molar fractions. The influence of reaction conditions such as catalyst concentration, polymerization time, and temperature on the number average molecular weight (M_n) and molecular weight distribution (M_w/M_n) of the copolymers was investigated. The polymerizations were carried out in bulk at 110 °C with 3 wt % stannous octoate as a catalyst for 16 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, and gel permeation chromatography. The copolymers synthesized exhibited moderate molecular weights (M_n = 6000–14,700 g mol^?1) with reasonable molecular weight distributions (M_w/M_n = 1.11–2.23). The values of the glass‐transition temperature (T_g) of the copolymers depended on the molar fractions of cyclic carbonate. When the MBC content decreased from 76 to 12 mol %, the T_g increased from 16 to 48 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐MBC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐MBC)s was evaluated from weight‐loss measurements and the change of M_n and M_w/M_n. Debenzylation of 3 by catalytic hydrogenation led to the corresponding linear poly(ester‐carbonate), 4 , with pendent amino and carboxylic groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2303–2312, 2004     

Conductive,Monodisperse Polyaniline Nanofibers of Controlled Length Using Well‐Defined Cylindrical Block Copolymer Micelles as Templates

Stable colloidal dispersions of polyaniline (PAni) nanofibers with controlled lengths from about 200 nm–1.1 μm and narrow length distributions (L_w/L_n<1.04; L_w=weight average micelle length, L_n=number average micelle length) were prepared through the template‐directed synthesis of PAni using monodisperse, solution‐self‐assembled, cylindrical, block copolymer micelles as nanoscale templates. These micelles were prepared through a crystallization‐driven living self‐assembly method from a poly(ferrocenyldimethylsilane)‐b‐poly(2‐vinylpyridine) block copolymer (PFS₂₅‐b‐P2VP₄₂₅). This material was initially self‐assembled in iPrOH to form cylindrical micelles with a crystalline PFS core and a P2VP corona and lengths of up to several micrometers. Sonication of this sample then yielded short cylinders with average lengths of 90 nm and a broad length distribution (L_w/L_n=1.32). Cylindrical micelles of PFS₂₅‐b‐P2VP₄₂₅ with controlled lengths and narrow length distributions (L_w/L_n<1.04) were subsequently prepared using thermal treatment at specific temperatures between 83.5 and 92.0 °C using a 1D self‐seeding process. These samples were then employed in the template‐directed synthesis of PAni nanofibers through a two‐step procedure, where the micellar template was initially stabilised by deposition of an oligoaniline coating followed by addition of a polymeric acid dopant, resulting in PAni nanofibers in the emeraldine salt (ES) state. The ES–PAni nanofibers were shown to be conductive by scanning conductance microscopy, whereas the precursor PFS₂₅‐b‐P2VP₄₂₅ micelle templates were found to be dielectric in character.     

Microwave‐improved polymerization of ϵ‐caprolactone initiated by carboxylic acids

The ring‐opening polymerization of ε‐caprolactone (ε‐CL), initiated by carboxylic acids such as benzoic acid and chlorinated acetic acids under microwave irradiation, was investigated; with this method, no metal catalyst was necessary. The product was characterized as poly(ε‐caprolactone) (PCL) by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, ultraviolet spectroscopy, and gel permeation chromatography. The polymerization was significantly improved under microwave irradiation. The weight‐average molecular weight (M_w) of PCL reached 44,800 g/mol, with a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.6, when a mixture of ε‐CL and benzoic acid (25/1 molar ratio) was irradiated at 680 W for 240 min, whereas PCL with M_w = 12,100 and M_w/M_n = 4.2 was obtained from the same mixture by a conventional heating method at 210 °C for 240 min. A degradation of the resultant PCL was observed during microwave polymerization with chlorinated acetic acids as initiators, and this induced a decrease in M_w of PCL. However, the degradation was hindered by benzoic acid at low concentrations. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 13–21, 2003     

Preparation and microstructural analysis of poly(lactic‐alt‐glycolic acid)

Alternating copolymers of glycolic (G) and lactic (L) acid were prepared by the condensation of the preformed dimers: L_LG and L_racG. By size exclusion chromatography (THF, PS standards), poly(L_LG) exhibited a molecular weight (M_n) of 15.6 kg mol^?1, with a weight average molecular weight (M_w) of 26.9 kg mol^?1 and a PDI of 1.72. The M_n for poly(L_racG) was 9.2 kg mol^?1, with a M_w of 12.9 kg mol^?1 and a PDI of 1.40. The NMR spectra of poly(L_LG) were consistent with an isotactic microstructure. NMR spectra of the racemic poly(L_racG) were consistent with an atactic structure. The methylene region of the ¹H NMR spectrum showed a tetrad level of resolution of the nearby stereochemical relationships, for example, iii. Resonances for other groups in both the ¹H and ¹³C NMR spectra gave only a triad level of resolution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4704–4711, 2008     

Self‐assembly of N‐carboxyethylchitosan near the isoelectric point

For the first time the possibility to obtain nanostructures by self‐assembly of chitosan polyampholytic derivative was demonstrated. The self‐assembly of N‐carboxyethylchitosan (CECh) took place only near its isoelectric point (pH 5.0–5.6). Out of the pH range 5.0–5.6, CECh aqueous solutions behaved as real solutions. Dynamic light scattering and atomic force microscopy analyses revealed that spherically shaped or rod/worm‐like nanosized assemblies were formed depending on the polymer molar mass, pH value, and polymer concentration. CECh of two different molar masses was studied in concentrations ranging from 0.01 to 0.1 mg/mL. The structures from CECh of weight‐average molar mass (M_w ) 4.5 × 10³ g/mol were spherical regardless the pH and polymer concentration. In contrast, CECh of high molar mass (HMMCECh, M_w = 6.7 × 10⁵ g/mol) formed self‐assemblies with spherical shape only at pH 5.0 and 5.6. At pH 5.2 spherical nanoparticles were obtained only at polymer concentration 0.01 mg/mL. The mean hydrodynamic diameter (D_h) of the obtained nanoparticles was in the range from 30 to 980 nm. On increasing the concentration, aggregation of the nanoparticles appeared, and at HMMCECh concentration 0.1 mg/mL, rod/worm‐like structures were obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6712–6721, 2008     

Synthesis of poly(glycerol)‐block‐poly(methyl acrylate) multi‐arm star polymers

Novel polyfunctional macroinitiators for atom transfer radical polymerization (ATRP) were obtained via esterification of hyperbranched polyglycerol (PG) (M_n = 4 770 g/mol, M_w/M_n = 1.5) with 2‐bromoisobutyryl bromide. Such macroinitiators were used in the presence of CuBr/pentamethyldiethylenetriamine (PMDETA) to initiate methyl acrylate (MA) polymerization, resulting in multi‐arm block copolymers with polyether core and 45–55 PMA arms. PMA arm length was controlled via monomer/initiator ratio and conversion (< 35%). Polymers were characterized by ¹H NMR, ¹³C NMR, SEC, membrane osmometry and DSC.     

The Average Properties of Block Copolymers Formed via the One‐Prepolymer Method and the Two‐Prepolymer Method

In this paper, a model is developed for determining the average properties of block copolymers formed via the one‐prepolymer and the two‐prepolymer methods. A knowledge of the average properties of reacting prepolymers, instead of their whole molecular weight distribution (MWD), is sufficient to calculate the desired average molecular weights of the resultant block copolymers. M_n, M_w and polydispersity index (PI) of the block copolymers formed via the one‐prepolymer and two‐prepolymer are studied in detail for comparison. The simulation results indicate that M_n,1p < M_n,2p and M_w,1p < M_w,2p in the range 0 ≤ α < 1, while M_n,1p = M_n,2p and M_w,1p = M_w,2p when α = 1. In addition, the conversion (α) does not significantly influence PI_2p, while PI_1p decreases linearly with increasing α. The results also show that PI_1p > PI_2p in the range 0 ≤ α < 1. Finally, PI_1p and PI_2p approach the same value at α = 1. This indicates that the polydispersity of the block copolymers formed via the two‐prepolymer method is usually narrower than that of the block copolymers formed via the one‐prepolymer method.     

Synthesis of poly(p‐phenylene) macromonomers and multiblock copolymers

Rigid‐rod poly(4′‐methyl‐2,5‐benzophenone) macromonomers were synthesized by Ni(0) catalytic coupling of 2,5‐dichloro‐4′‐methylbenzophenone and end‐capping agent 4‐chloro‐4′‐fluorobenzophenone. The macromonomers produced were labile to nucleophilic aromatic substitution. The molecular weight of poly(4′‐methyl‐2,5‐benzophenone) was controlled by varying the amount of the end‐capping agent in the reaction mixture. Glass‐transition temperatures of the macromonomers increased with increasing molecular weight and ranged from 117 to 213 °C. Substitution of the macromonomer end groups was determined to be nearly quantitative by ¹H NMR and gel permeation chromatography. The polymerization of a poly(4′‐methyl‐2,5‐benzophenone) macromonomer [number‐average molecular weight (M_n) = 1.90 × 10³ g/mol; polydispersity (M_w)/M_n = 2.04] with hydroxy end‐capped bisphenol A polyaryletherketone (M_n = 4.50 × 10³ g/mol; M_w/M_n = 1.92) afforded an alternating multiblock copolymer (M_n = 1.95 × 10⁴ g/mol; M_w/M_n = 6.02) that formed flexible, transparent films that could be creased without cracking. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3505–3512, 2001     

Static light scattering from poly(ethylene oxide) in methanol

Static light scattering measurements were performed on dilute solutions of monodisperse poly(ethylene oxide) (PEO) in methanol at 25°C. PEOs of five different molecular weights ranging from nominal M_w = 8.6 × 10⁴ to 9.13 × 10⁵ were used. Linear Zimm plots were obtained for all the PEO samples: no downturn was observed at small angles, indicating that no large aggregates of PEO molecules exist in the solution. From the plots, values of the weight-average molecular weight, M_w, the radius gyration, R_G, and the second virial coefficient, A₂, were successfully determined for respective PEOs. Observed relationship between R_G and M_w indicates that methanol is certainly a good solvent for the polymer. © 1996 John Wiley & Sons, Inc.     

Synthesis of well‐defined amphiphilic polymethylene‐b‐poly(ε‐caprolactone)‐b‐poly(acrylic acid) triblock copolymer via a combination of polyhomologation,ring‐opening polymerization,and atom transfer radical polymerization

Well‐defined amphiphilic polymethylene‐b‐poly(ε‐caprolactone)‐b‐poly(acrylic acid) (PM‐b‐PCL‐b‐PAA) triblock copolymers were synthesized via a combination of polyhomologation, ring‐opening polymerization (ROP), and atom transfer radical polymerization (ATRP). First, hydroxyl‐terminated polymethylenes (PM‐OH; M_n = 1100 g mol^?1; M_w/M_n = 1.09) were produced by polyhomologation followed by oxidation. Then, the PM‐b‐PCL (M_n = 10,000 g mol^?1; M_w/M_n = 1.27) diblock copolymers were synthesized via ROP of ε‐caprolactone using PM‐OH as macroinitiator and stannous octanoate (Sn(Oct)₂) as a catalyst. Subsequently, the macroinitiator transformed from PM‐b‐PCL in high conversion initiated ATRPs of tert‐butyl acrylate (^tBA) to construct PM‐b‐PCL‐b‐P^tBA triblock copolymers (M_n = 11,000–14,000 g mol^?1; M_w/M_n = 1.24–1.26). Finally, the PM‐b‐PCL‐b‐PAA triblock copolymers were obtained via the hydrolysis of the P^tBA segment in PM‐b‐PCL‐b‐P^tBA triblock copolymers. The chain structures of all the polymers were characterized by gel permeation chromatography, proton nuclear magnetic resonance, and Fourier transform infrared spectroscopy. Porous films of such triblock copolymers were fabricated by static breath‐figure method and observed by scanning electron microscope. The aggregates of PM‐b‐PCL‐b‐PAA triblock copolymer were studied by transmission electron microscope. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Atom transfer radical copolymerization of n‐hexylmaleimide and styrene in an ionic liquid

Dendritic polyarylether 2‐bromoisobutyrates of different generations (Gn‐Br, n = 1–3) as macroinitiators for the atom transfer radical copolymerization of N‐hexylmaleimide and styrene in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate, were investigated. The copolymerization carried out in the ionic liquid with CuBr/pentamethyldiethylenetriamine as a catalyst at room temperature afforded polymers with well‐defined molecular weights and low polydispersities (1.18 < M_w/M_n < 1.36, where M_w is the weight‐average molecular weight and M_n is the number‐average molecular weight), and the resultant copolymers possessed an alternating structure over a wide range of monomer feeds (f₁ = 0.3–0.8). Meanwhile, the copolymerization was also conducted in anisole at 110 °C under similar conditions so that the effect of the reaction media on the polymerization could be evaluated. The monomer reactivity ratios showed that the tendency to form alternating copolymers for the two monomers was stronger in ionic liquids than in anisole. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3360–3366, 2002     

ATRP of MMA under 60Co γ‐irradiation at room temperature

In this work, atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was successfully carried out at room temperature (25 °C) under ⁶⁰Co γ‐irradiation environment. The polymerization proceeded smoothly with high conversion (>90%) within 7 h. The polymerizations kept the features of controlled radical polymerization: first‐order kinetics, well‐predetermined number‐average molecular weights (M_n,GPC), and narrow molecular weight distributions (M_w/M_n < 1.25). ¹H NMR spectroscope and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry confirmed that poly(methyl methacrylate) (PMMA) chain was end‐capped by the initiator moieties. The Cu(II) concentration could reduce to 20 ppm level while keeping good control over molecular weights. This is the first successful example for the ATRP of MMA under ⁶⁰Co γ‐irradiation at room temperature. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Reversible addition–fragmentation chain transfer/miniemulsion polymerization of butyl methacrylate in the presence of β‐cyclodextrin

In the presence of β‐cyclodextrin (β‐CD), reversible addition–fragmentation chain transfer (RAFT) polymerization has been successfully applied to control the molecular weight and polydispersity [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] in the miniemulsion polymerization of butyl methacrylate, with 2‐cyanoprop‐2‐yl dithiobenzoate as a chain‐transfer agent (or RAFT agent) and 2,2′‐azoisobutyronitrile (AIBN) as an initiator. β‐CD acted as both a stabilizer and a solubilizer, assisting the transportation of the water‐insoluble, low‐molecular‐weight RAFT agent into the polymerization loca (i.e., droplets or latex particles) and thereby ensuring that the RAFT agent was homogeneous in the polymerization loca. The polymers produced in the system of β‐CD exhibited narrower polydispersity (1.2 < M_w/M_n < 1.3) than those without β‐CD. Moreover, the number‐average molecular weight in the former case could be controlled by a definite amount of the RAFT agent. Significantly, β‐CD was proved to have a favorable effect on the stability of polymer latex, and no coagulum was observed. The effects of the concentrations of the RAFT agent and AIBN on the conversion, the molecular weight and its distribution, and the particle size of latices were investigated in detail. Furthermore, the influences of the variations of the surfactant (sodium dodecyl sulfate) and costabilizer (hexadecane) on the RAFT/miniemulsion polymerization were also studied. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2931–2940, 2005     

Synthesis of three‐armed poly(trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L‐proline)‐block‐poly(ε‐caprolactone) copolymers

A series of novel types of three‐armed poly(trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline)‐block‐poly(ε‐caprolactone) (PHpr‐b‐PCL) copolymers were successfully synthesized via melt block copolymerization of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) and ε‐caprolactone (ε‐CL) with a trifunctional initiator trimethylolpropane (TMP) and stannous octoate (SnOct₂) as a catalyst. For the homopolycondensation of N‐CBz‐Hpr with TMP initiator and SnOct₂ catalyst, the number‐average molecular weight (M_n) of prepolymer increases from 530 to 3540 g mol^?1 with the molar ratio of monomer to initiator (3–30), and the molecular weight distribution (M_w/M_n) is between 1.25 to 1.32. These three‐armed prepolymer PHpr were subsequently block copolymerized with ε‐caprolactone (ε‐CL) in the presence of SnOct₂ as a catalyst. The M_n of the copolymer increased from 2240 to 18,840 g mol^?1 with the molar ratio (0–60) of ε‐CL to PHpr. These products were characterized by differential scanning calorimetry (DSC), ¹H NMR, and gel permeation chromatography. According to DSC, the glass‐transition temperature (T_g) of the three‐armed polymers depended on the molar ratio of monomer/initiator that were added. In vitro degradation of these copolymers was evaluated from weight‐loss measurements and the change of M_n and M_w/M_n. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1708–1717, 2005     

Living/controlled radical copolymerization of N‐substituted maleimides with styrene in 1‐butyl‐3‐methylimidazolium hexafluorophosphate and anisole

The atom transfer radical copolymerization of N‐substituted maleimides such as N‐phenylmaleimide (PhMI), N‐cyclohexylmaleimide (ChMI), and N‐butylmaleimide (NBMI) with styrene initiated with dendritic polyarylether 2‐bromoisobutyrates in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]), at room temperature and anisole at 110 °C was investigated. The dendritic‐linear block copolymers obtained in ionic liquid possessed well‐defined molecular weight and low polydispersity (1.05 < M_w/M_n < 1.32) and could be used as a macroinitiator for chain‐extension polymerization, suggesting the living nature of the reaction system. The ionic liquids containing catalyst could be recycled in the atom transfer radical polymerization systems without further treatment. Compared with polymerization conducted in anisole, the polymerization in ionic liquid had a stronger tendency for alternation. The tendency for alternation decreased in the order PhMI > NBMI > ChMI in [bmim][PF₆] and PhMI > ChMI > NBMI in anisole. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2156–2165, 2003