Elementary reaction analysis of the radical polymerization of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups

The polymerizations of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups (RS‐EMBI and S‐EMBI) with dimethyl 2,2′‐azobisisobutyrate (MAIB) were studied in methanol (MeOH) and in benzene kinetically and with electron spin resonance (ESR) spectroscopy. The initial polymerization rate (R_p) at 60 °C was given by R_p = k[MAIB]^{0.58 ± 0.05}[RS‐EMBI]^{2.4 ± 0.l} and R_p = k[MAIB]^{0.61 ± 0.05}[S‐EMBI]^{2.3 ± 0.l} in MeOH and R_p = k[MAIB]^{0.54 ± 0.05}[RS‐EMBI]^{1.7 ± 0.l} in benzene. The rate constants of initiation (k_df), propagation (k_p), and termination (k_t) as elementary reactions were estimated by ESR, where k_d is the rate constant of MAIB decomposition and f is the initiator efficiency. The k_p values of RS‐EMBI (0.50–1.27 L/mol s) and S‐EMBI (0.42–1.32 L/mol s) in MeOH increased with increasing monomer concentrations, whereas the k_t values (0.20?7.78 × 10⁵ L/mol s for RS‐EMBI and 0.18?6.27 × 10⁵ L/mol s for S‐EMBI) decreased with increasing monomer concentrations. Such relations of R_p with k_p and k_t were responsible for the unusually high dependence of R_p on the monomer concentration. The activation energies of the elementary reactions were also determined from the values of k_df, k_p, and k_t at different temperatures. R_p and k_p of RS‐EMBI and S‐EMBI in benzene were considerably higher than those in MeOH. R_p of RS‐EMBI was somewhat higher than that of S‐EMBI in both MeOH and benzene. Such effects of the kinds of solvents and monomers on R_p were explicable in terms of the different monomer associations, as analyzed by ¹H NMR. The copolymerization of RS‐EMBI with styrene was examined at 60 °C in benzene. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1819–1830, 2003     

Radical heterogeneous polymerization behavior of N‐methyl‐α‐fluoroacrylamide in benzene

The polymerization of N‐methyl‐α‐fluoroacrylamide (NMFAm) initiated with dimethyl 2,2′‐azobisisobutyrate (MAIB) in benzene was studied kinetically and with electron spin resonance. The polymerization proceeded heterogeneously with the highly efficient formation of long‐lived poly(NMFAm) radicals. The overall activation energy of the polymerization was 111 kJ/mol. The polymerization rate (R_p) at 50 °C is given by R_p = k[MAIB]^0.75±0.05 [NMFAm]^0.44±0.05. The concentration of the long‐lived polymer radical increased linearly with time. The formation rate (R_p?) of the long‐lived polymer radical at 50 °C is expressed by R_p? = k[MAIB]^1.0±0.1 [NMFAm]^0±0.1. The overall activation energy of the long‐lived radical formation was 128 kJ/mol, which agreed with the energy of initiation (129 kJ/mol), which was separately estimated. A comparison of R_p? with the initiation rate led to the conclusion that 1‐methoxycarbonyl‐1‐methylethyl radicals (primary radicals from MAIB), escaping from the solvent cage, were quantitatively converted into the long‐lived poly(NMFAm) radicals. Thus, this polymerization involves completely unimolecular termination due to polymer radical occlusion. ¹H NMR‐determined tacticities of resulting poly(NMFAm) were estimated to be rr = 0.34, mr = 0.48, and mm = 0.18. The copolymerization of NMFAm(M₁) and St(M₂) with MAIB at 50 °C in benzene gave monomer reactivity ratios of r₁ = 0.61 and r₂ = 1.79. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2196–2205, 2001     

Radical and cationic polymerizations of 3‐ethyl‐3‐methacryloyloxymethyloxetane

3‐Ethyl‐3‐methacryloyloxymethyloxetane (EMO) was easily polymerized by dimethyl 2,2′‐azobisisobutyrate (MAIB) as the radical initiator through the opening of the vinyl group. The initial polymerization rate (R_p) at 50 °C in benzene was given by R_p = k[MAIB]^0.55 [EMO]^1.2. The overall activation energy of the polymerization was estimated to be 87 kJ/mol. The number‐average molecular weight (M?_n) of the resulting poly(EMO)s was in the range of 1–3.3 × 10⁵. The polymerization system was found to involve electron spin resonance (ESR) observable propagating poly(EMO) radicals under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) at 60 °C are 120 and 2.41 × 10⁵ L/mol s, respectively—much lower than those of the usual methacrylate esters such as methyl methacrylate and glycidyl methacrylate. The radical copolymerization of EMO (M₁) with styrene (M₂) at 60 °C gave the following copolymerization parameters: r₁ = 0.53, r₂ = 0.43, Q₁ = 0.87, and e₁ = +0.42. EMO was also observed to be polymerized by BF₃OEt₂ as the cationic initiator through the opening of the oxetane ring. The M?_n of the resulting polymer was in the range of 650–3100. The cationic polymerization of radically formed poly(EMO) provided a crosslinked polymer showing distinguishably different thermal behaviors from those of the radical and cationic poly(EMO)s. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1269–1279, 2001     

Kinetic study on the radical polymerization of 2‐methacryloyloxyethyl phosphorylcholine

Polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) was kinetically investigated in ethanol using dimethyl 2,2′‐azobisisobutyrate (MAIB) as initiator. The overall activation energy of the homogeneous polymerization was calculated to be 71 kJ/mol. The polymerization rate (R_p) was expressed by R_p = k[MAIB]^0.54±0.05 [MPC]^1.8±0.1. The higher dependence of R_p on the monomer concentration comes from acceleration of propagation due to monomer aggregation and also from retardation of termination due to viscosity effect of the MPC monomer. Rate constants of propagation (k_p) and termination (k_t) of MPC were estimated by means of ESR to be k_p = 180 L/mol · s and k_t = 2.8 × 10⁴ L/mol · s at 60 °C, respectively. Because of much slower termination, R_p of MPC in ethanol was found at 60 °C to be 8 times that of methyl methacrylate (MMA) in benzene, though the different solvents were used for MPC and MMA. Polymerization of MPC with MAIB in ethanol was accelerated by the presence of water and retarded by the presence of benzene or acetonitrile. Poly(MPC) showed a peculiar solubility behavior; although poly(MPC) was highly soluble in ethanol and in water, it was insoluble in aqueous ethanol of water content of 7.4–39.8 vol %. The radical copolymerization of MPC (M₁) and styrene (St) (M₂) in ethanol at 50 °C gave the following copolymerization parameters similar to those of the copolymerization of MMA and St; r₁ = 0.39, r₂ = 0.46, Q₁ = 0.76, and e₁ = +0.51. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 509–515, 2000     

Kinetic study of the radical polymerization behavior of N‐(1‐phenylethylaminocarbonyl)methacrylamide

Polymerization of N‐(1‐phenylethylaminocarbonyl)methacrylamide (PEACMA) with dimethyl 2,2′‐azobisisobutyrate (MAIB) was kinetically studied in dimethyl sulfoxide (DMSO). The overall activation energy of the polymerization was estimated to be 84 kJ/mol. The initial polymerization rate (R_p) is given by R_p = k[MAIB]^0.6[PEACMA]^0.9 at 60 °C, being similar to that of the conventional radical polymerization. The polymerization system involved electron spin resonance (ESR) spectroscopically observable propagating poly(PEACMA) radical under the actual polymerization conditions. ESR‐determined rate constants of propagation and termination were 140 L/mol s and 3.4 × 10⁴ L/mol s at 60 °C, respectively. The addition of LiCl accelerated the polymerization in N,N‐dimethylformamide but did not in DMSO. The copolymerization of PEACMA(M₁) and styrene(M₂) with MAIB in DMSO at 60 °C gave the following copolymerization parameters; r₁ = 0.20, r₂ = 0.51, Q₁ = 0.59, and e₁ = +0.70. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2013–2020, 2005     

Free‐radical copolymerization of styrene and m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate studied by 1H NMR kinetic experiments

The free‐radical copolymerization of m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate (TMI) and styrene was studied with ¹H NMR kinetic experiments at 70 °C. Monomer conversion vs time data were used to determine the ratio k_p × k_t^?0.5 for various comonomer mixture compositions (where k_p is the propagation rate coefficient and k_t is the termination rate coefficient). The ratio k_p × k_t^?0.5 varied from 25.9 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for pure styrene to 2.03 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for 73 mol % TMI, indicating a significant decrease in the rate of polymerization with increasing TMI content in the reaction mixture. Traces of the individual monomer conversion versus time were used to map out the comonomer mixture composition drift up to overall monomer conversions of 35%. Within this conversion range, a slight but significant depletion of styrene in the monomer feed was observed. This depletion became more pronounced at higher levels of TMI in the initial comonomer mixture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1064–1074, 2002     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

Radical polymerization of vinyl thiocyanatoacetate: Participation of group‐transfer mechanism

Vinyl thiocyanatoacetate (VTCA) was synthesized, and its radical polymerization behavior was studied in acetone with dimethyl 2,2′‐azobisisobutyrate (MAIB) as an initiator. The initial polymerization rate (R_p) at 60 °C was expressed by R_p = k[MAIB]^0.6±0.1 [VTCA]^1.0±0.1 where k is a rate constant. The overall activation energy of the polymerization was 112 kJ/mol. The number‐average molecular weights of the resulting poly (VTCA)s (1.4–1.6 × 10⁴) were almost independent of the concentrations of the initiator and monomer, indicating chain transfer to the monomer. The chain‐transfer constant to the monomer was estimated to be 9.6 × 10^?3 at 60 °C. According to the ¹H and ¹³C NMR spectra of poly (VTCA), the radical polymerization of VTCA proceeded through normal vinyl addition and intramolecular transfer of the cyano group. The cyano group transfer became progressively more important with decreasing monomer concentration. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 573–582, 2002; DOI 10.1002/pola.10137     

Kinetic and ESR studies on radical polymerization behavior of N‐(2‐phenylethoxycarbonyl)methacrylamide

Polymerization of N‐(2‐phenylethoxycarbonyl)methacrylamide (PECMA) with dimethyl 2,2′‐azobisisobutyrate (MAIB) was investigated in tetrahydrofuran (THF) kinetically and by means of electron spin resonance (ESR). The overall activation energy of the polymerization was calculated to be 58 kJ/mol. The initial polymerization rate (R_p) is expressed by R_p = k[MAIB]^0.3[PECMA]^2.3 at 60 °C. Such unusual kinetics may be ascribable to primary radical termination and to acceleration of propagation due to monomer association. Propagating poly(PECMA) radical was observed as a 13‐line spectrum by ESR under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p, 4.7–10.5 L/mol s) and termination (k_t, 4.6 × 10⁴ L/ml s) at 60 °C are much lower than those of methacrylamide and methacrylate esters. The Arrhenius plots of k_p and k_t gave activation energies of propagation (24 kJ/mol) and termination (25 kJ/mol). The copolymerizations of PECMA with styrene (St) and acrylonitrile were examined at 60 °C in THF. Copolymerization parameters obtained for the PECMA (M₁) − St(M₂) system are as follows: r₁ = 0.58, r₂ = 0.60, Q₁ = 0.73, and e₁ = +0.22. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4264–4271, 2000     

Effect of LiClO4 on the radical polymerization of Di-2-[2-(2-methoxyethoxy)ethoxy]ethyl itaconate

The effect of LiClO₄ on the polymerization of di-2-[2-(2-methoxyethoxy)ethoxy]ethyl itaconate (DMEI) with dimethyl 2,2′-azobisisobutyrate (MAIB) was investigated in methyl ethyl ketone (MEK) kinetically and by ESR. The polymerization rate (R_p) at 50°C, where the concentrations of DMEI and MAIB were 1.00 and 5.00 × 10⁻² mol/L, increased with increasing [LiClO₄]. Marked acceleration was observed at higher [LiClO₄]s than 1.0 mol/L. The molecular weight of resulting polymer (ca. 10,000) was relatively insensitive to [LiClO₄], indicating occurrence of chain transfer. IR analysis of mixtures of LiClO₄/DMEI and LiClO₄/poly(DMEI) indicated complexation of LiClO₄ with DMEI and its polymer. The rate constants of propagation (k_p) and termination (k_t) were determined by ESR. k_p (1.7–10.5 L/mol s at 50°C) increased with [LiClO₄]. k_t (5.2–1.0 × 10⁴ L/mol s at 50°C) showed remarkable decrease at higher [LiClO₄]s than 1.0 mol/L. R_p of polymerization of equimolar complex of LiClO₄/DMEI with MAIB at 50°C in MEK was expressed by R_p = k[MAIB]^0.5[DMEI]^2.4. k_p increased and k_t decreased with [DMEI]. The activation energies of overall polymerization, propagation and termination were estimated to be 34.5, 8.0, and 59.4 kJ/mol. Copolymerization of DMEI with styrene was also profoundly affected by the presence of LiClO₄. Such large effects of LiClO₄ on the homo- and copolymerization of DMEI are explicable in term of association of LiClO₄-complexed DMEI monomers. © 1997 John Wiley & Sons, Inc.     

Kinetic and ESR studies on the radical polymerization of Di-n-butyl itaconate in benzene

The polymerization of di-n-butyl itaconate (DBI) intiated with AIBN was kinetically investigated in benezene. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.5[DBI]^1.7. The polymerization showed a considerably low overall activation energy of 15.3 kcal/mol. The initiator efficiency of AIBN in this system decreased with increasing DBI concentration, ranging from 0.34 to 0.55°C, which is ascribable to viscosity effect due to the monomer. From an ESR study, the polymerization system was found to involve two kinds of persistent radicals, namely, primary propagating ( III ) and propagating ( I ) radicals. The relative concentration of III to I increased with decreasing monomer concentration. Azo-nitrile initiators such as AVN and ACN similarly produced two persistent radicals, while MAIB, DBPO, and PBO yielded only propagating radical I as persistent. The MAIB-initiated polymerization of DBI was also performed in benzene. Similar kinetic features were observed, that is, a higher dependence of R_p on the DBI concentration and a low overall activation energy (14.4 kcal/mol). The following rate equation was obtained at 50°C:R_p = k[MAIB]^0.5[DBI]^1.6. The initiator efficiency of MAIB decreased with increasing DBI concentration, ranging from 0.32 to 0.53 at 50°C. The concentration of propagating radical I was determined by ESR at 50 and 61°C, from which k_p and k_t were estimated. The k_p value increased with increasing monomer concentration, while the k_t one decreased with the DBI concentration. These values are much lower compared with those of MMA.     

Radical-initiated homo- and copolymerization of α-methylene-γ-butyrolactone

The kinetics of α-methylene-γ-butyrolactone (α-MBL) homopolymerization was investigated in N,N-dimethylformamide (DMF) with azobis(isobutyronitrile) as initiator. The rate of polymerization (R_p) was expresed by R_p = k[AIBN]^0.54[α-MBL]^1.1 and the overall activation energy was calculated as 76.1 kJ/mol. Kinetic constants for α-MBL polymerization were obtained as follows: k_p/k_t^1/2 = 0.161 L^1/2 mol^?1/2·s^?1/2; 2fk_d = 2.18 × 10^?5 s^?1. The relative reactivity ratios of α-MBL(M₂) copolymerization with styrene (r₁ = 0.14, r₂ = 0.87) were obtained. Applying the Q–e scheme led to Q = 2.2 and e = 0.65. These Q and e values for α-MBL are higher than those for MMA     

Influence of the stereochemical configuration on the radical polymerization of methacrylic monomers: cis‐ and trans‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate

The synthesis of two new isomeric monomers, cis‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate (CCDM) and trans‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate (TCDM), starting from the reaction of glycerol and cyclohexanecarbaldehyde, is reported. The process involved the preparation of different alcohol acetals and esterification with methacryloyl chloride of the corresponding cis and trans 5‐hydroxy compounds of 2‐cyclohexyl‐1,3‐dioxane. The radical polymerization reactions of both monomers, under the same conditions of temperature, solvent, monomer, and initiator concentrations, were studied to investigate the influence of the monomer configuration on the values of the propagation and termination rate constants (k_p and k_t ).The values of the ratio k_p /k_t ^1/2 were determined by UV spectroscopy by the measurement of the changes of absorbance with time at several wavelengths in the range 275–285 nm, where an appropriate change in absorbance was observed. Reliable values of the kinetics constants were determined by UV spectroscopy, showing a very good reproducibility of the kinetic experiments. The values of k_p /k_t ^1/2, in the temperature interval 45–65 °C, lay in the range 0.40–0.50 L^1/2/mol^1/2s^1/2 and 0.20–0.30 L^1/2/mol^1/2s^1/2 for CCDM and TCDM, respectively. Measurements of both the radical concentrations and the absolute rate constants k_p and k_t were also carried out with electron paramagnetic resonance techniques. The values of k_p at 60 °C were nearly identical for both the trans and cis monomers, but the termination rate constant of the trans monomer was about three times that of the cis monomer at the same temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3883–3891, 2000     

Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Synthesis of highly branched polyethylene using para‐phenyl‐substituted α‐diimine nickel catalysts

A series of para‐phenyl‐substituted α‐diimine nickel complexes, [(2,6‐R₂‐4‐PhC₆H₂N═C(Me))₂]NiBr₂ (R = ⁱPr ( 1 ); R = Et ( 2 ); R = Me ( 3 ); R = H ( 4 )), were synthesized and characterized. These complexes with systematically varied ligand sterics were used as precatalysts for ethylene polymerization in combination with methylaluminoxane. The results indicated the possibility of catalytic activity, molecular weight and polymer microstructure control through catalyst structures and polymerization temperature. Interestingly, it is possible to tune the catalytic activities ((0.30–2.56) × 10⁶ g (mol Ni·h)^?1), polymer molecular weights (M_n = (2.1–28.6) × 10⁴ g mol^?1) and branching densities (71–143/1000 C) over a very wide range. The polyethylene branching densities decreased with increasing bulkiness of ligand and decreasing polymerization temperature. Specifically, methyl‐substituted complex 3 showed high activities and produced highly branched amorphous polyethylene (up to 143 branches per 1000 C).     

Radical polymerization behavior of ethyl ortho-formylphenyl fumarate involving intramolecular hydrogen abstraction

The radical polymerization behavior of ethyl ortho-formyl-phenyl fumarate (EFPF) using dimethyl 2,2′-azobisisobutyrate (MAIB) as initiator was studied in benzene kinetically and ESR spectroscopically. The polymerization rate (R_p) at 60°C was given by R_p = k[MAIB]^0.76[EFPF]^0.56. The number-average molecular weight of poly(EFPF) was in the range of 1600–2900. EFPF was also easily photopolymerized at room temperature without any photosensitizer probably because of the photosensitivity of the formyl group of monomer. Analysis of ¹H? and ¹³C-NMR spectra of the resulting polymer revealed that the radical polymerization of EFPF proceeds in a complicated manner involving vinyl addition and intramolecular hydrogen-abstraction. The polymerization system was found to involve ESR-observable poly(EFPF) radicals under the actual polymerization conditions. ESR-determined rate constant (2.4–4.0 L/mol s) of propagation at 60°C increased with decreasing monomer concentration, which is mainly responsible for the observed low de-pendency of R_p on the EFPF concentration. Copolymerizations of EFPF with some vinyl monomers were also examined. © 1995 John Wiley & Sons, Inc.     

Polymerization of 1,3‐dienes with functional groups. II. Free‐radical polymerization of N‐(2‐methylene‐3‐butenoyl)piperidine

The free‐radical homopolymerization and copolymerization behavior of N‐(2‐methylene‐3‐butenoyl)piperidine was investigated. When the monomer was heated in bulk at 60 °C for 25 h without an initiator, about 30% of the monomer was consumed by the thermal polymerization and the Diels–Alder reaction. No such side reaction was observed when the polymerization was carried out in a benzene solution with 1 mol % 2,2′‐azobisisobutylonitrile (AIBN) as an initiator. The polymerization rate equation was found to be R_p ∝ [AIBN]^0.507[M]^1.04, and the overall activation energy of polymerization was calculated to be 89.5 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure that included both 1,4‐E and 1,4‐Z configurations. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were carried out in benzene solutions at 60 °C with AIBN as an initiator. In the copolymerization with styrene, the monomer reactivity ratios were r₁ = 6.10 and r₂ = 0.03, and the Q and e values were calculated to be 10.8 and 0.45, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1545–1552, 2003     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

Determination of absolute rate constants for free radical polymerization of ethyl α-fluoroacrylate and characterization of the polymer

The absolute rate constants for propagation (k_p) and for termination (k_t) of ethyl α-fluoroacrylate (EFA) were determined by means of the rotating sector method; k_p = 1120 and k_t = 4.8 × 10⁸ L/mol.s at 30°C. The monomer reactivity ratios for the copolymerizations with various monomers were obtained. By combining the k_p values for EFA from the present study and those for common monomers with the monomer reactivity ratios, the absolute values of the rate constants for cross-propagations were also evaluated. Reactivities of EFA and poly(EFA) radical, being compared with those of methyl acrylate and its polymer radical, were found to be little affected by the α-fluoro substitution. Poly(EFA) prepared with the radical initiator was characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Although the glass transition temperature obtained by DSC for poly(EFA) resembled that of poly(ethyl α-chloroacrylate), its TGA thermogram showed fast chain de polymerization to EFA that was distinct from complicated degradation of poly(ethyl α-chloroacrylate).     

Synthesis of polymers by template polymerization. I. Template polymerization of poly(methacrylic acid) with β‐cyclodextrin

A novel template monomer with multiple methacryloyl groups was synthesized with β‐cyclodextrin by the acetylation of primary hydroxyl groups and the esterification of secondary hydroxyl groups with methacrylic acid anhydride. The average number of methacryloyl groups in the monomer was 11. The radical polymerization of the monomer was carried out with the following initiators: α,α′‐azobisisobutylonitrile, H₂O₂? Fe²⁺ redox initiator, p‐xylyl‐N,N‐dimethyldithiocarbamate (XDC), and α‐bromo‐p‐xylyl‐N,N‐dimethyldithiocarbamate (BXDC). When the concentration of the monomer was less than 4.12 × 10^?3 M, polymerization was limited inside the molecule, and gelation of the system was hindered. For controlled radical photopolymerization with XDC and BXDC, the methacryloyl groups of the monomer were homogeneously polymerized, and poly(methacrylic acid) with a narrow molecular weight distribution was obtained by the hydrolysis of the polymerized products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3539–3546, 2001