High-performance semiconducting polythiophenes for organic thin-film transistors

Conjugated polymers have been widely studied as potential semiconductor materials for organic thin-film transistors (TFTs). However, they have provided functionally poor transistor properties when the TFTs are fabricated in air. We have developed a class of liquid crystalline regioregular polythiophenes, PQTs, that possess sufficient air stability to enable achievement of excellent TFT properties under ambient conditions. These polythiophenes exhibit unique self-assembly ability and form highly structured thin films when deposited from solution under appropriate conditions. TFTs fabricated in air with PQT channel layers have provided high field-effect mobility to 0.14 cm2 V-1 s-1 and high current modulation to over 107, together with other desirable transistor properties. These high-performance polythiophenes will therefore help bring the long-standing concept of low-cost organic/polymer transistor circuits closer to commercial reality.     

Regioregular poly[3‐(4‐alkoxyphenyl)thiophene]s

An easy synthetic procedure for soluble poly[3‐(4‐alcoxyphenyl)thiophene]s is reported. The polymers present a high regioregularity degree as determined by both UV–vis spectra and ¹H and ¹³C NMR analysis. Furthermore, X‐ray powder diffraction analysis performed on films of the polymers suggests a π‐stacked packing structure of the macromolecules. Electrical characterization was performed on one of the synthesized polythiophenes on both undoped and doped (with FeCl₃ or iodine) films. The conductivity and charge‐carrier mobility were assessed by current–voltage and field effect measurements. Well‐structured polymer films were obtained simply via spin coating from chloroform solutions and without the need of further processing, unlike other regioregular polythiophenes reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1758–1770, 2007     

Electronic structure and optical properties of poly[3‐(4‐octylphenoxy)thiophene]: Experimental and theoretical studies

This article reports the synthesis and characterization of a new polythiophene derivative phenoxy‐substituted, the poly[3‐(4‐octylphenoxy)thiophene] (POPOT). The oxidative polymerization was found to yield low molecular weight material, whereas a modified Grignard metathesis (GRIM) yielded polymers of high molecular weights. One‐ and two‐dimensional NMR indicated the latter to be highly regioregular. POPOTs exhibited higher thermal stabilities than equivalent alkoxy‐substituted polythiophenes and exhibited red shifts in the absorption spectra with respect to equivalent. The absorption spectra showed a red shifted λ_max at 540 nm in tetrahydrofuran solutions and 580 nm in spin‐coated films, with respect to poly(3‐alkylthiophene)s. A further red shift of 40 nm in going from solution (540 nm) to solid states (580 nm) is correlated with results from density functional theory electronic structure calculations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7505–7516, 2008     

Organic semiconductors for solution-processable field-effect transistors (OFETs)

The cost-effective production of flexible electronic components will profit considerably from the development of solution-processable, organic semiconductor materials. Particular attention is focused on soluble semiconductors for organic field-effect transistors (OFETs). The hitherto differentiation between "small molecules" and polymeric materials no longer plays a role, rather more the ability to process materials from solution to homogeneous semiconducting films with optimal electronic properties (high charge-carrier mobility, low threshold voltage, high on/off ratio) is pivotal. Key classes of materials for this purpose are soluble oligoacenes, soluble oligo- and polythiophenes and their respective copolymers, and oligo- and polytriarylamines. In this context, micro- or nanocrystalline materials have the general advantage of somewhat higher charge-carrier mobilities, which, however, could be offset in the case of amorphous, glassy materials by simpler and more reproducible processing.     

Frontispiece: Dehalogenative or Deprotonative? The Preparation Pathway to the Organometallic Monomer for Transition-Metal-Catalyzed Catalyst-Transfer-Type Polymerization of Thiophene Derivatives

Due to a wide range of applications in electronic materials, polythiophenes attract considerable attention in organic and polymer syntheses as well as in materials science. For the purpose of developing the practical synthetic protocol, this review focuses on the deprotonative pathway in the preparation of thiophene organometallic monomer, which was shown to be effective employing 2-halo-3-substituted thiophene as a monomer precursor. The thus metallated thiophene monomer was shown to undergo polymerization by nickel(II) complex catalysis, with which highly regioregular head-to-tail (HT)-type polythiophenes were obtained with controlled molecular weight and molecular weight distribution. Several polythiophene derivatives with modified thiophene-ring and side-chain structures were shown to be designed in order to achieve the designed functionality as materials.     

Regioregularity and solar cell device performance of poly(3‐dodecylthienylenevinylene)

Influence of side chain regioregularity on photovoltaic performance has been investigated in bulk heterojunction solar cells based on a series of poly(3‐dodecylthienylenevinylene)s (C₁₂‐PTV) and 6,6‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM). Performance of each C₁₂‐PTV is optimized for fair comparison. It is found that regiorandomness has no detrimental effect on device performance, in sharp contrast to poly(3‐hexylthiophene) (P3HT). Fully regioregular C₁₂‐PTV performs slightly poorer than less regioregular ones mainly due to its fast crystallization behavior. The results suggest that introduction of side chain regiorandomness is an effective strategy to enhance processability of certain types of polymers without a reduction in photovoltaic performance. The better polymer:PCBM weight ratio, found to be 3:7 for all C₁₂‐PTVs, and improved device performance, as compared with the literature work on the same polymer synthesized by a different method, demonstrate again the importance of the integrity of polymer main chain structure. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis,characterization, and application to polymer solar cells of polythiophene derivatives with ester‐ or ketone‐substituted phenyl side groups

Four polythiophene derivatives including regiorandom polymers P1 , P2 , and P3 and a regioregular polymer P4 , containing a phenyl side chain with electron‐withdrawing carbonyl groups such as an ester and a ketone at the 3‐position of the thiophene ring, were synthesized by Stille coupling reaction. Bulk‐heterojunction polymer solar cells (PSCs) based on these polymers as p‐type semiconductors and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) were fabricated, and their photovoltaic performances were evaluated for the first time. The PSC devices based on the regioregular polymer P4 :PCBM = 1:2 (w/w) exhibited a high‐open‐circuit voltage (V_oc) of 0.943 V because of the low‐lying highest occupied molecular orbit energy level of P4 . The short π–π stacking distance (0.355 nm) in the parallel direction to the substrate and “face‐on” rich orientation were observed by the grazing incidence wide‐angle X‐ray scattering experiment, which might reflect higher J_sc and FF values of the P4 :[6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) PSC device than others. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 875–887     

Correlating Molar Mass, π-Conjugation,and Optical Properties of Narrowly Distributed Anionic Polythiophenes in Aqueous Solutions

Polythiophene-based conjugated polyelectrolytes (CPE) are attracting increasing attention as sensor or interface materials in chemistry and biology. While cationic polythiophenes are better understood, limited structural information is available on their anionic counterparts. Limited access to well-defined polymers has made the study of structure-property relationships difficult and clear correlations have remained elusive. By combining controlled Kumada catalyst transfer polymerization with a polymer-analog substitution, regioregular and narrowly distributed poly(6-(thiophen-3-yl)hexane-1-sulfonate)s (PTHS) with tailored chain length are prepared. Analysis of their aqueous solution structures by small-angle neutron scattering (SANS) revealed a cylindrical conformation for all polymers tested, with a length close to the contour length of the polymer chains, while the estimated radii remain too small (<1.5 nm) for extensive π-stacking of the chains. The latter is particularly interesting as the longest polymer exhibits a concentration-independent structured absorption typical of crystalline polythiophenes. Increasing the ionic strength of the solution diminishes these features as the Coulomb repulsion between the charged repeat units is shielded, allowing the polymer to adopt a more coiled conformation. The extended π-conjugation, therefore, appears to be a key parameter for these unique optical features, which are not present in the corresponding cationic polythiophenes.     

A General Method for Growing Two‐Dimensional Crystals of Organic Semiconductors by “Solution Epitaxy”

Two‐dimensional (2D) crystals of organic semiconductors (2DCOS) have attracted attention for large‐area and low‐cost flexible optoelectronics. However, growing large 2DCOS in controllable ways and transferring them onto technologically important substrates, remain key challenges. Herein we report a facile, general, and effective method to grow 2DCOS up to centimeter size which can be transferred to any substrate efficiently. The method named “solution epitaxy” involves two steps. The first is to self‐assemble micrometer‐sized 2DCOS on water surface. The second is epitaxial growth of them into millimeter or centimeter sized 2DCOS with thickness of several molecular layers. The general applicability of this method for the growth of 2DCOS is demonstrated by nine organic semiconductors with different molecular structures. Organic field‐effect transistors (OFETs) based on the 2DCOS demonstrated high performance, confirming the high quality of the 2DCOS.     

The Polymer Physics of Multiscale Charge Transport in Conjugated Systems

Conjugated polymers are promising candidates for next‐generation low‐cost flexible electronics. Field‐effect transistors comprising conjugated polymers have witnessed significant improvements in device performance, notably the field‐effect mobility, in the last three decades. However, to truly make these materials commercially competitive, a better understanding of charge‐transport mechanisms in these structurally heterogeneous systems is needed for providing systematic guides for further improvements. This review assesses the key microstructural features of conjugated polymers across multiple length scales that can influence charge transport, with special attention given to the underlying polymer physics. The mechanistic understanding from collective experimental and theoretical studies point to the importance of interconnected ordered domains given the macromolecular nature of the polymeric semiconductors. Based on the criterion, optimization to improve charge transport can be broadly characterized by efforts to (a) promote intrachain transport, (b) establish intercrystallite connectivity, and (c) enhance interchain coupling. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1559–1571     

Ketones as Molecular Co‐catalysts for Boosting Exciton‐Based Photocatalytic Molecular Oxygen Activation

Excitonic processes in semiconductors open up the possibility for pursuing photocatalytic organic synthesis. However, the insufficient spin relaxation and robust nonradiative decays in semiconductors place restrictions on both quantum yield and selectivity of these reactions. Herein, by taking polymeric carbon nitride (PCN)/acetone as a prototypical system, we propose that extrinsic aliphatic ketones can serve as molecular co‐catalysts for promoting spin‐flip transition and suppressing non‐radiative energy losses. Spectroscopic investigations indicate that hot excitons in PCN can be transferred to ketones, while triplet excitons in ketones can be transferred to PCN. As such, the PCN/ketone systems exhibit considerable triplet‐exciton accumulation and extended visible‐light response, leading to excellent performance in exciton‐based photocatalysis, such as singlet oxygen generation. This work provides a fundamental understanding of energy harvesting in semiconductor/molecule systems, and paves the way for optimizing exciton‐based photocatalysis via molecular co‐catalyst design.     

Regioregular poly(thiophene-3-alkanoic acid)s: water soluble conducting polymers suitable for chromatic chemosensing in solution and solid state

Regioregular polythiophenes with pendant carboxylic acid functionality, poly(thiophene-3-propionic acid) (PTPA, 3) and poly(thiophene-3-octanoic acid) (PTOA, 4), were prepared as water soluble conducting polymers and their chemosensory response was studied. Treatment with aqueous base generated intensely colored water soluble conducting polymer salts, with the color varying both as a function of counter ion size and length of the carboxyalkyl substituent. PTPA showed a different colorimetric response to each of the alkali earth metals whereas the longer chain PTOA was only sensitive to ions larger than Et₄N⁺. Distinct color changes were also noted in studies of divalent cations known to selectively bind carboxylates, such as Zn²⁺, Mn²⁺, and Cd²⁺. Cast films of PTPA have been found to act as sensors to acid vapor (Δλ_max of up to 132 nm). IR shows that the polymer self-assembles upon HCl vapor exposure, and that the process is completely reversible, leading to a good solid-state sensor for acids. This work demonstrates that regioregular polythiophenes containing acid side-chains have tremendous potential in the development of new sensors.     

The influence of poly(3-hexylthiophene) regioregularity on fullerene-composite solar cell performance

A comparison of three samples of poly(3-hexylthiophene) having regioregularities of 86, 90, and 96% is used to elucidate the effect of regioregularity on polymer-fullerene-composite solar cell performance. It is observed that polymer samples with lower regioregularity are capable of generating fullerene composites that exhibit superior thermal stability. The enhanced thermal stability of the composites is attributed to a lower driving force for polymer crystallization in the less regioregular polymer samples, which is supported with two-dimensional grazing incidence X-ray scattering and differential scanning calorimetry measurements. Furthermore, it is demonstrated that all three polymer samples are capable of generating solar cells with equivalent peak efficiencies of approximately 4% in blends with [6,6]-phenyl-C61-butyric acid methyl ester. While it may be non-intuitive that polymers with lower regioregularity can exhibit higher efficiencies, it is observed that the charge-carrier mobility of the three polymers is on the same order of magnitude (10(-4) cm2 V(-1) s(-1)) when measured from the space-charge-limited current, suggesting that highly regioregular and crystalline polythiophenes are not required in order to effectively transport charges in polymer solar cells. Overall, these results suggest a design principle for semicrystalline conjugated polymers in fullerene-composite solar cells in which crystallization-driven phase separation can be dramatically suppressed via the introduction of a controlled amount of disorder into the polymer backbone.     

Synthesis and properties of polythiophenes with conjugated side‐chains containing carbon–carbon double and triple bonds

Two soluble side‐chain conjugated polythiophenes, poly{3‐[2‐(4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3OPVT) and poly{3‐(4‐octyloxy‐phenylethynyl)‐thiophene} (P3OPET) have been synthesized successfully. In P3OPVT and P3OPET, substituted benzene rings are connected with the polythiophene backbone through trans carbon–carbon double bond and carbon–carbon triple bond, respectively. Absorption spectra of the P3OPVT and P3OPET both show two absorption peaks located in UV and visible region, respectively. The results of optical and electrochemical measurements indicate that the conjugated side‐chains can reduce the bandgap effectively. This type of side‐chain conjugated polythiophenes may be promising for the applications in polymer photovoltaic cells and field effect transistors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2206–2214, 2006     

Role of polythiophenes as electroactive materials

Semiconducting polythiophenes display electroactive properties which make them excellent candidates for applications as electroactive materials. Ability to undergo doping and to switch between different oxidation states allow tuning the chemical and physical properties of polythiophenes. Furthermore, the ability to integrate polythiophenes into copolymers, hybrid composites with metals and inorganic materials make them useful in electronic and biomedical applications. The capability to vary the properties of the final material with low production cost and high processability into thin films makes polythiophenes desirable materials for many applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3327–3346     

Bandgap Engineering through Controlled Oxidation of Polythiophenes

The use of Rozen’s reagent (HOF?CH₃CN) to convert polythiophenes to polymers containing thiophene‐1,1‐dioxide (TDO) is described. The oxidation of polythiophenes can be controlled with this potent, yet orthogonal reagent under mild conditions. The oxidation of poly(3‐alkylthiophenes) proceeds at room temperature in a matter of minutes, introducing up to 60 % TDO moieties in the polymer backbone. The resulting polymers have a markedly low‐lying lowest unoccupied molecular orbital (LUMO), consequently exhibiting a small bandgap. This approach demonstrates that modulating the backbone electronic structure of well‐defined polymers, rather than varying the monomers, is an efficient means of tuning the electronic properties of conjugated polymers.     

聚合物单原子光催化剂的载流子分离和表面反应机制

近10年来, 研究者制备了大量的单原子催化剂(SACs), 其在光、 电、 热等催化体系中展现出优异的催化性能及较高的实用性和经济性. 光催化过程的独特性使其在催化本质上明显不同于热催化和电催化过程, 即处于激发态的电子和空穴参与反应, 而非基态的价电子. 本文首先探讨了有机聚合半导体与传统无机金属化合物半导体的区别, 指出聚合物半导体介电常数通常较小且光生电子与空穴的中心距离过短(计算上通常 ^{<1 nm), 导致其界面处几乎不存在明显的能带弯曲. 将金属离子引入聚合物半导体的骨架中可以有效引入给体-受体对, 在提高载流子分离效率的同时延长其寿命. 在高效聚合物基单原子光催化剂的设计过程中, 引入单原子金属位点后的激发态电荷分布及捕获态电子对反应的驱动力是决定催化剂整体性能的关键因素. 时间-空间双因子布局分析法和瞬态吸收光谱可为研究者提供相关信息. 随着人工智能的进一步发展, 建立回归精度接近或达到密度泛函理论水准的能量函数, 从而反推激发态下体系的能量变化, 有望为光催化反应的激发特性与反应活性建立可靠的联系. 此外, 配体和溶剂化效应在今后的研究中也应被仔细考虑.}     

Facile syntheses,morphologies, and optical absorptions of P3HT coil‐rod‐coil triblock copolymers

Here we report syntheses, photophysical properties, and morphologies of a series of coil‐rod‐coil ABA triblock copolymers containing highly regioregular poly(3‐hexylthiophene) (P3HT) as the central rod block. A new methodology, based on the coupling reaction between living polymeric anions [polystyrene, polyisoprene, and poly(methyl methacrylate)] and aldehyde terminated P3HT, was successfully developed to synthesize the triblock copolymers with low polydispersities. This coupling reaction was effective for building blocks with a variety of molecular weights; therefore, a good variation in compositions of the triblock copolymers could be feasibly achieved. The non‐P3HT coil segments and the solvents were found to exhibit noticeable effects on morphologies of the spin‐coated thin films. Attachment of the coil segments to P3HT did not change the optical absorption of the P3HT segment as the block copolymers were dissolved in solution regardless the chemical structure and the molecular weight of the coil segment. Interestingly, different UV–vis absorption behaviors were observed for the spin‐coated thin films of the block copolymers, which closely related to their morphologies. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3311–3322, 2010     

Incorporation of 2,6‐Connected Azulene Units into the Backbone of Conjugated Polymers: Towards High‐Performance Organic Optoelectronic Materials

Azulene is a promising candidate for constructing optoelectronic materials. An effective strategy is presented to obtain high‐performance conjugated polymers by incorporating 2,6‐connected azulene units into the polymeric backbone, and two conjugated copolymers P(TBAzDI‐TPD) and P(TBAzDI‐TFB) were designed and synthesized based on this strategy. They are the first two examples for 2,6‐connected azulene‐based conjugated polymers and exhibit unipolar n‐type transistor performance with an electron mobility of up to 0.42 cm² V^?1 s^?1, which is among the highest values for n‐type polymeric semiconductors in bottom‐gate top‐contact organic field‐effect transistors. Preliminary all‐polymer solar cell devices with P(TBAzDI‐TPD) as the electron acceptor and PTB7‐Th as the electron donor display a power conversion efficiency of 1.82 %.     

Correlations between structure and far-infrared active modes in polythiophenes

We have investigated the experimental X-ray and far-infrared responses of three polythiophenes synthesized from a thiophene, alpha-bithiophene, and alpha-quaterthiophene monomer. The X-ray data show that the crystallinity of the different polythiophene samples depends on the synthesis conditions. An excellent correlation between the crystallinity of polythiophenes and their far-infrared signatures is demonstrated. In addition, the assignment of the far-infrared phonon modes in polythiophenes is given by using both an experimental filiation procedure and first-principles calculations. In particular, the ring libration inside the polymeric chain, directly involved in the electron-phonon coupling, is assigned.