Phase behavior and structure formation in ternary blends: studies on blends of PVDF/PMMA/PVAC

The phase behavior of ternary blends was analyzed on the basis of the lattice approach. Both compatibilization and incompatibilization effects are predicted to occur depending on the relative magnitudes and the sign of the interaction parameters of the binary subsystems. Thermodynamic, structural and kinetic properties were investigated for a ternary model blend composed of poly(vinylidene fluoride), poly(methyl methacrylate) and poly(vinyl acetate). This particular ternary system is characterized by a specific symmertry with respect to the interactions in the binary subsystems. This symmetry affects both thermodynamic and structural properties. The experimentally determined interaction parameters were used to model the phase diagram on the basis of the lattice model: the theoretical phase diagram was found to be close to the experimental one. The crystallization processes were analyzed both for the binary and the ternary systems on the basis of a modified Turnbull–Fisher equation. The conclusions are that the properties of the ternary systems can be understood to a first approximation on the basis of those of the corresponding binary systems and the symmetry of the interactions.     

Phase behaviour and morphology of polymer/liquid crystal blends

Abstract

The phase behaviour of blends of poly(ethylene oxide) (PEO) with the liquid crystal p-azoxyanisole (PAA) has been studied by differential scanning calorimetry and optical microscopy. This system exhibits partial miscibility of the components in the molten state (at temperatures above 337 K). The melting temperature and enthalpy of the PAA phase has been found to depend on the blend composition, whereas the melting behaviour of the polymer phase remains quite unaltered. The occurrence of the PAA nematic phase, dispersed within an isotropic liquid phase, has been observed at high concentrations of liquid crystal. The morphology of the blends in the solid state changes largely with the PAA content, depending on the solubility of the components in the liquid phase.     

Phase morphology, crystallisation behaviour and mechanical properties of isotactic polypropylene/high density polyethylene blends

The phase morphology, crystallisation behaviour and mechanical properties of isotactic polypropylene (iPP)/high density polyethylene (HDPE) blends were investigated. It was found that the properties are intimately related to each other. The morphology of the blends showed a two phase structure in which the minor phase was dispersed as domains in the major continuous matrix phase. The domain size of the dispersed phase increased with increasing concentration of that phase due to coalescence. It was also found that the domain size of the dispersed phase depends on the viscosity difference between the two phases. For a given HDPE/iPP blend, where HDPE is the matrix and iPP is the dispersed phase, the iPP domains were smaller than HDPE domains of the corresponding iPP/HDPE blend where iPP is the matrix and HDPE is the dispersed phase. A co-continuous morphology was observed at 50/50 PP/HDPE composition. Crystallinity studies revealed that blending has not much effect on the crystalline melting point of polypropylene and high density polyethylene. The crystallisation enthalpy and heat of fusion values of HDPE and PP in the blend were decreased as the amount of the other component increased. The variation in percent crystallinity of HDPE and PP in the blend was found to depend on the morphology of the blend. All the mechanical properties except Young's modulus and hardness showed negative deviation from the additivity line. This is due to the incompatibility of these blends.     

Determination of various deformation processes in impact-modified PMMA at strain rates up to 105%/min

The deformation processes in impact-modified PMMA, which deforms homogeneously, were determined by means of the stress/strain experiment (, ) with simultaneous lateral strain measurement (_lat) in a wide range of strain rates () up to 10⁵%/min (impact stress). The elastic, plastic cavitation and plastic shear processes were determined as a function of strain. Therefore we calculated the elastic strain ( _el), the elastic volume expansion ( _{vol el}), the cavitation strain ( _cav), which is identical with the plastic volume expansion ( _{vol pl}), the shear strain ( _sh) and the energy densities (W_el, W_cav, W_sh) related to these three processes.For strains of 3 % onward it was found that plastic shear processes and plastic cavitation processes are responsible for a partial loss of elastically stored energy. Both plastic processes turn out to be mostly anelastic deformations, their amount depending strongly on the strain rate. The contributions of the processes to the total deformation of the unmodified PMMA in its strain range are similar to those of the impact-modified PMMA, and the high impact strength is caused by a shift of the catastrophic rupture to very high strains.     

Morphology and deformation behaviour of SBS/PS blends: a combined microscopic and spectroscopic study

Correlation between morphology and micromechanical deformation behaviour of blends consisting of a lamellae-forming linear styrene/butadiene block copolymer and polystyrene homopolymer (hPS) was studied by different microscopic techniques (transmission electron microscopy and scanning electron microscopy) and rheo-optical Fourier transformed infrared spectroscopy. Attributable to a change in morphology from well-ordered lamellae to a distorted one, a transition in deformation mechanism from homogeneous plastic flow of the lamellae to formation of local craze-like deformation zones was observed on addition of hPS. The latter led to a drastic reduction in elongation at break. An abrupt depression in the degree of orientation of the polystyrene (PS) and the polybutadiene (PB) phases in the blends suggested that the failure occurs at the interface between the added hPS and PS blocks of the block copolymer.     

Study of the properties of rigid and plasticized PVC/PMMA blends

The aim of this work is to study the structure-properties relationship of rigid and plasticized PVC/PMMA blends. For that purpose, blends of variable compositions were prepared in the absence and in the presence of a plasticizer di (ethyl-2 hexyl) phtalate or DEHP. The miscibility of the two polymers was investigated by differential scanning calorimetric analysis (DSC) and Fourier transform infrared spectroscopy. The weight loss from 30 to 600°C was investigated by thermogravimetric analysis (TGA). The thermal degradation under nitrogen at 185°C was studied and the amount of HCl released from PVC was measured by the pH method. Furthermore, the variation of mechanical properties such as tensile behavior, hardness and impact resistance was investigated for all blend compositions.     

PC/ABS blends: Compatibilization and mechanical behaviour

PC/ABS(M) blends, encompassing the whole composition range between pure PC and ABS(M), were prepared by melt-mixing in a Brabender-like apparatus. Thermal, mechanical and impact tests were performed on compression moulded specimens. Inward Tg shifts were detected for PC and ABS(M) in the blends with respect to pure PC and ABS(M) values, indicating an interaction between the component domains. This finding was confirmed by the comparison of the experimental tensile moduli with the Kernels model predictions, showing an evidence of a good adhesion between the phases. A synergistic effect was observed for the impact strength as well as for the maximum stress at an ABS(M) blend content of about 25 weight %. All the results are interpreted on the basis of an interlayer existing at the boundary between the PC and ABS phases. A preliminary investigation on the influence of the ABS internal composition, keeping constant all the other conditions (mixing, processing, specimen preparation), was carried out as well. Differences in the properties of PC/ABS(M) and PC/ABS(B) blends are thoroughly discussed. The compatibility between PC and ABS domains seems to be scarcely influenced by such a parameter in these blends.     

Study of the miscibility and the thermal degradation of PVC/PMMA blends

The aim of this paper is to study the miscibility and the thermal degradation of PVC/PMMA blends. For that purpose, blends of variable compositions from 0 to 100 wt% were prepared with and without plasticizer. Their physico-chemical characterization was carried out by differential scanning calorimetric analysis (DSC) and Fourier transform infrared spectroscopy (FTIR). Their thermal degradation under nitrogen at 185°C was studied and the HCl evolved from PVC was measured by the pH method. Degraded samples were characterized, after purification, by FTIR and UV-visible spectroscopy. The DSC analysis showed polymer miscibility up to 60 wt% of PMMA. This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC as evidenced by FTIR analysis. On the other hand, it was found that PMMA exerted a stabilizing effect on the thermal degradation of PVC by reducing the zip dehydrochlorination and by leading to the formation of short polyenes.     

Influence of processing method and components molecular structure on the phase behaviour of polyethylenes/dye blends

The phase dispersion of terthiophene alkyl derivatives on different polyethylene matrices was investigated. The PE affinity toward dichroic dyes with different structure, the effect of blending process and the influence of a polyolefinic compatibilizer on the homogeneity of host-guest blends were comparatively investigated by calorimetry, DSC and SEM analyses. For these purposes, polyethylenes with different molecular weights and densities and EVAc were used as host matrices. The polymeric compatibilizer was prepared by radical functionalization of a commercial low density polyethylene. The dichroic nature of the guest phase allowed to perform UV-Vis measurements in polarized light on oriented blend film samples. The dyes affinity toward PE is one of the key factor in obtaining oriented polyolefinic films with high optical performances for several applications.     

The influence of the arrangement of styrene in methyl methacrylate/butadiene/styrene on the properties of PMMA/SAN/MBS blends

A series of methyl methacrylate‐butadiene‐styrene (MBS) core–shell impact modifiers were prepared by grafting styrene (St) and methyl methacrylate (MMA) onto polybutadiene (PB) or styrene‐butadiene rubber (SBR) seed latex in emulsion polymerization. All the MBS modifiers were designed to have the same total chemical composition, and Bd/St/MMA equaled 39/31/30, which was a prerequisite for producing transparent blends with poly(MMA)/styrene‐acrylonitrile (PMMA/SAN) matrix copolymers. Under this composition, different ways of arrangement for styrene in MBS led to the different structure of MBS modifier. The concentration of PB or SBR rubber of MBS in PMMA/SAN/MBS blends was kept at a constant value of 15 wt.%. The effects of arrangement of St in MBS on the mechanical and optical properties of PMMA/SAN/MBS blends were investigated. The results indicated that Izod impact strength of PMMMA/SAN/MBS blend with the amount of St grafted on core in MBS was higher than that of blend with the amount of St copolymerized with Bd in core of MBS, while the transparency of blend is opposite. From transmission electron microscopy, it was found that the arrangement of St in MBS influenced the dispersion of blend, which led to different toughness. Copyright © 2013 John Wiley & Sons, Ltd.     

Exchange reactions on polyarylate-phenoxy blends: Their influence on the physical and mechanical behaviour

The possibility of interchange reactions in blends of the polyarylate of bisphenol A and the polyhydroxyether of bisphenol A is considered by examining the changes in the melt-viscosity for various mixing times. The immiscibility of this blend is confirmed by measurements of the softening temperature. The DSC technique is used to show the variation produced in the structure of the blends as a consequence of the development of interchange reactions. The influence of the exchange process on the mechanical behaviour is shown by the improvement observed in the elastic modulus of the reacted mixtures compared with that of the corresponding unreacted blends.     

Chemical reactions occurring in the thermal treatment of PC/PMMA blends

The chemical reactions occurring in the thermal treatment of bisphenol-A polycarbonate (PC) and poly(methyl methacrylate) (PMMA) blends have been investigated by nuclear magnetic resonance (NMR), mass spectrometry (MS), size exclusion chromatography (SEC), and thermogravimetry (TG). Our results suggest that in the melt-mixing of PC/PMMA blends, at 230°C, no exchange reactions occur and that only the depolymerization reaction of PMMA has been observed. In the presence of an ester-exchange catalyst (SnOBu₂), an exchange reaction was found to occur at 230°C, but no trace of PC/PMMA graft copolymer has been observed. Instead, an exchange reaction between the monomer methyl methacrylate (MMA), generated in the unzipping of PMMA chains, and the carbonate groups of PC has been suggested. This is due to the diffusion of MMA at the interface or even into the PC domains, where it can react with PC producing low molar mass PC oligomers bearing methacrylate and methyl carbonate chain ends and leaving the undecomposed PMMA chains unaffected. The TG curves of PC/PMMA blends prepared by mechanical mixing and by casting from THF show two separated degradation steps corresponding to that of homopolymers. This behavior is different from that of a transparent film of PC/PMMA blend, obtained by solvent casting from DCB/CHCl₃, which shows a single degradation step indicating that the degradation rate of PC is increased by the presence of PMMA in the blend. The thermal degradation products obtained by DPMS of this blend consist of methyl methacrylate (MMA), cyclic carbonates arising from the degradation of PMMA and PC, respectively, and a series of open chain bisphenol-A carbonate oligomers with methacrylate and methyl carbonate terminal groups. The presence of the latter compounds suggests a thermally activated exchange reaction occurring above 300°C between MMA and PC. The presence of bisphenol-A carbonate oligomers bearing methyl ether end groups, generated by a thermally activated decarboxylation of the methyl carbonate end groups of PC, has also been observed among the pyrolysis products. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1873–1884, 1998     

Viscoelastic behaviour of compatible polymer blends: Polystyrene/tetramethylpolycarbonate

The linear and non-linear viscoelastic properties of a series of compatible polymer blends (polystyrene/tetramethylpolycarbonate) have been studied in the temperature range 180–280°. Assuming additivity of both free volume and viscosity structure factors, it was possible to derive the linear viscoelastic properties of the blends, given blend characteristics and composition: the theoretical curves obtained from the model agree with experimental data within experimental uncertainties. Further, the model leads to simple blending laws for the glass transition temperature, zero shear viscosity, limiting compliance and plateau modulus of the blends.     

Material and structural behaviour of PMMA from low temperatures to over the glass transition: Quasi-static and dynamic loading

This work aims at characterizing the mechanical behaviour of polymethyl-methacrylate (PMMA) under high velocity impact conditions over a wide range of testing temperatures. To this end, the mechanical response at uniaxial compression is studied for both quasi-static and dynamic conditions covering testing temperatures below, at and above glass transition. A pseudo-brittle to ductile transition in the failure of PMMA is observed at a threshold that depends on testing temperature and strain rate. This analysis allows for the interpretation of the perforation impact tests and to explain the principal deformation and failure mechanisms. To complete the study, the Richeton model to predict yielding is revisited. Finally, we provide a new constitutive model for finite deformations to further identify the deformation mechanisms governing the mechanical behaviour of PMMA and the influence of temperature and strain rate on them.     

Mechanical properties and strain-rate effect of EVA/PMMA in situ polymerization blends

Transparent EVA/PMMA sheets are produced via in situ polymerization of MMA in this work. In the presence of the EVA-graft-PMMA (EVA-g-PMMA), which is synthesized by using tert-butyl peroctoate (t-BO) as initiator during MMA polymerization, EVA can be well dispersed in the PMMA matrix. Both tensile fracture energy and Izod impact strength of the EVA/PMMA blends are higher than those of the neat PMMA. SEM photos show that the grafted copolymer also prevents the dispersed EVA particles from being pulled out from the fracture surface. While the EVA/PMMA blends are investigated at room temperature over the strain rates of four decades (from 1.6 × 10⁻⁴ to 0.16 s⁻¹). It has an obvious transition, whereas the neat PMMA remains brittle over the entire range of strain rates.     

Morphology and mechanical properties of immiscible polyethylene/polyamide12 blends prepared by high shear processing

In this work,completely immiscible polyethylene/polyamidel2 (PE/PA12) blends were prepared by high shear extruder.The morphology and mechanical properties of the blends were investigated as a function of rotation speed.It wasfound that the high shear processing is an effective method to improve the dispersion of the PAl2 phase in PE matrix whenPAl2 contents are 5 wt％ and 10 wt％,and the dispersed phase particle size is reduced with the increase of rotation speed from 100 r/min to 500 r/min.However,with further increase of PAl2 content to 20 wt％,high shear processing has no effect on the phase morphology of the blends.Accordingly,a largely increased elongation at break and impact strength are observed for PE/PA12/95/5 and PE/PA12/90/10 blends obtained at high rotation speeds but no effect on the property of PE/PA12/80/20.Annealing experiment demonstrated that the obtained phase morphology is not stable thus compatibilizer should be introduced in the future work.This work could provide a guideline for the application of high shear processing in the preparation of polymer blends with huge polarity difference.     

Proton NMR investigation of the local dynamics of PEO in PEO/PMMA blends

Longitudinal relaxation of proton magnetisation was used to characterize the molecular motions of PEO chains in compatible PEO (hydrogenated)/PMMA (deuterated) blends. Both the temperature and the PEO concentration, Φ, were varied. A maximum in the spin–lattice relaxation rate was observed and its properties were analyzed as a function of Φ. For Φ ≤ 0.50, the maximum is observed below the glass transition temperature of the blend; this shows that PEO chains dispersed in a matrix of PMMA remain highly mobile on a local scale even below T_g(Φ). A frequency–temperature correspondence procedure, applied to the measurements performed at two Larmor frequencies, 32 and 60 MHz, leads to a characteristic correlation time for PEO molecular motions. Its temperature dependence obeys a WLF free volume relation above the glass transition of the blends. The PEO free volume fraction and its thermal expansion are strongly reduced by the presence of the PMMA chains. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1095–1105, 1997     

The influence of thermoplastic elastomers on structure and crystallisation behaviour of polyolefin blends

The influence of a styrene-ethylene/butylene-styrene triblock copolymer (SEBS) on an isotactic polypropylene / polyethylene blend was investigated. For comparison binary blends with polypropylene and SEBS alone were also prepared. The blends obtained by solution mixing were characterised by small-angle x-ray scattering, light microscopy and dynamic mechanical analysis. The role of SEBS as matrix reinforcer or interfacial agent is composition dependent. Experimental data also reveal a different influence of SEBS on the binary blends than on the ternary blends containing polyethylene.