Electrochemical determination of the surface composition of Pd–Pt core–shell nanoparticles

Different amounts of Pt atoms were deposited onto the surface of Pd nanoparticles supported on carbon black by hydroquinone reduction method in anhydrous ethanol. Here, we surveyed electrochemical probing of surface compositions of Pd–Pt surface alloys. They were calculated from hydrogen desorption, carbon monoxide adlayer oxidation, and reduced carbon dioxide oxidation charges. The surface composition of Pt drastically increased up to Pt[0.3]/Pd/C (23.1 at.% of Pt) and then approached that of pure Pt with the moderate rate of increase.     

Field-assisted organization,substrate effects and magnetic behavior of Ag30Co70 core–shell nanoparticles

In core–shell systems with non-magnetic core and magnetic shell, the electron transport and magnetic properties are expected to show enhanced behavior due to the particular morpho-structural features of the conductive and magnetic regions. This may lead to novel advanced GMR materials and spin valves. This is the case of core–shell Ag–Co colloidal nanoscale particles that organize into regular arrays. An insight on the structure and morphology of the newly synthesized Ag–Co nanoparticles deposited on different substrates will be presented. The influence of the substrate on different morphologies and organization dynamics is discussed. It is shown that the magnetic behavior of the Ag–Co nanoparticles is highly influenced by the corona-like morphology of Co shell, chemical environment of the magnetic atoms and by the fact that they exhibit strongly reduced coordination due to the surface states.     

Influence of the zirconia transformation on the thermal behavior of zircon–zirconia composites

During a heating?Ccooling cycle, zirconia (ZrO₂) undergoes a martensitic transformation from monoclinic to tetragonal structure phases, which presents special hysteresis loop in the dilatometry curve at temperatures between 800 and 1100?°C. Monoclinic zirconia (m-ZrO₂) particles reinforced ceramic matrix composites not always present this behavior. In order to elucidate this fact a series of zircon?Czirconia (ZrSiO₄?CZrO₂) ceramic composites have been obtained by slip casting and characterized. The final properties were also correlated with the zirconia content (0?C30?vol.%). The influence of the martensitic transformation (m?Ct) in well-dispersed zirconia grains ceramic composite on the thermal behavior was analyzed. Thermal behavior evaluation was carried out; the correlation between the thermal expansion coefficients with the zirconia content showed a deviation from the mixing rule applied. A hysteresis loop was observed in the reversible dilatometric curve of composites with enough zirconia grains (??10?vol.%). Over this threshold the zirconia content is correlated with the loop area. The transformation temperatures were evaluated and correlated with the zirconia addition. When detected the m?Ct temperature transformation is slightly influenced by the zirconia content (due to the previously evaluated decrease in the material stiffness) and similar to the temperature reported in literature. The reverse (cooling) transformation temperature is strongly decreased by the ceramic matrix. The DTA results are consistent with the dilatometric analysis, but this technique showed more reliable results. Particularly the endothermic m?Ct transformation temperature showed to be easily detected even when the only m-ZrO₂ present was the product of the slight thermal dissociation of the zircon during the processing of the pure zircon material.     

The role of MgO in the thermal behavior of MgO–silica fume pastes

The compounds of MgO–silica fume (SF) pastes constitute magnesium silicate hydrate (M–S–H) in a new generation of basic castables. However, Mg(OH)₂ is a common reaction product with the formation of M–S–H. This study aims to reduce the formation of Mg(OH)₂ in MgO–SF pastes. In this study, MgO powders were prepared by calcining magnesite at different temperatures and then mixed with SF and water to prepare MgO–SF pastes. The properties of MgO powders were characterized, and the pH values in the pore solutions of MgO–SF pastes were measured. The MgO–SF pastes cured for 90 days were calcined at 500, 700, 900 and 1200 °C, and the microstructure was characterized afterward. The results showed that both the reactivity of MgO powders and the pH value of the pore solution of MgO–SF pastes were diverse, which essentially depended on the grain sizes and the crystalline degree of MgO. Increasing the calcination temperature of MgO was beneficial to reduce the formation of Mg(OH)₂ or even stop it when using MgO calcined at 1450 °C. Enstatite and forsterite formed for all MgO–SF pastes after calcination. However, the microstructure of MgO–SF paste with MgO calcined at 1450 °C was denser than others. MgO–SF pastes were suitable for the new-generation refractory castables. Notably, using MgO calcined at 1450 °C is more appropriate.     

Colloidal Ag@Pd core–shell nanoparticles showing fast catalytic eradication of dyes from water and excellent antimicrobial behavior

Research on Chemical Intermediates - Colloidal Ag@Pd core–shell nanoparticles (NPs) were synthesized in aqueous medium following the citrate method. The progress of formation of the...     

Immobilization of Ni–Pd/core–shell nanoparticles through thermal polymerization of acrylamide on glassy carbon electrode for highly stable and sensitive glutamate detection

The preparation of a persistently stable and sensitive biosensor is highly important for practical applications. To improve the stability and sensitivity of glutamate sensors, an electrode modified with glutamate dehydrogenase (GDH)/Ni–Pd/core–shell nanoparticles was developed using the thermal polymerization of acrylamide (AM) to immobilize the synthesized Ni–Pd/core–shell nanoparticles onto a glassy carbon electrode (GCE). The modified electrode was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). Electrochemical data showed that the prepared biosensor had remarkably enhanced electrocatalytic activity toward glutamate. Moreover, superior reproducibility and excellent stability were observed (relative average deviation was 2.96% after continuous use of the same sensor for 60 times, and current responses remained at 94.85% of the initial value after 60 d). The sensor also demonstrated highly sensitive amperometric detection of glutamate with a low limit of detection (0.052 μM, S/N = 3), high sensitivity (4.768 μA μM⁻¹ cm⁻²), and a wide, useful linear range (0.1–500 μM). No interference from potential interfering species such as l-cysteine, ascorbic acid, and l-aspartate were noted. The determination of glutamate levels in actual samples achieved good recovery percentages.     

Influence of the synthesis parameters on the thermal behavior of some ZnO–starch composites

Ten ZnO–starch composites were synthesized using a simple precipitation methodology. The IR spectroscopy and XRD investigations reveal the presence of amorphous starch and crystalline ZnO. The obtained composites present a spherical morphology, 5–8 spheres being interconnected into aggregates. The thermal analysis demonstrates that starch decomposition and ZnO thermally induced nucleation and crystal growth depending on the synthesis parameters such as starch processing (dissolution or gelatinization), reaction temperature (80, 90, and 100 °C), reaction time (15 min or 6 h), and applied treatments (heating or ultrasound irradiation).     

Flow injection chemiluminescence sensor based on core–shell magnetic molecularly imprinted nanoparticles for determination of sulfadiazine

A novel flow injection chemiluminescence (FI-CL) sensor for determination of sulfadiazine (SDZ) using core–shell magnetic molecularly imprinted polymers (MMIPs) as recognition element is developed. Briefly, a hydrophilic MMIPs layer was produced at the surface of Fe₃O₄@SiO₂ magnetic nanoparticles (MNPs) via combination of molecular imprinting and reversible stimuli responsive hydrogel. And it provided the MMIPs with excellent adsorption capacity and rapid adsorption rate due to the imprinted sites mostly situated on the surface of MMIPs. Then the prepared SDZ-MMIPs were packed into flow cell to establish a novel FI-CL sensor. The sensor provided a wide linear range for SDZ of 4.0 × 10⁻⁷ to 1.0 × 10⁻⁴ mol L⁻¹ with a detection limit of 1.54 × 10⁻⁷ mol L⁻¹. And the relative standard deviation (RSD) for the determination of 1.0 × 10⁻⁶ mol L⁻¹ SDZ was 2.56% (n = 11). The proposed method was applied to determine SDZ in urine samples and satisfactory results were obtained.     

Adsorption of CO on various M@Pt core–shell nanoparticles: Surface-enhanced infrared absorption and DFT studies

Addition of some other metals to platinum causes significant increase of its catalytic activity towards ethanol electrochemical oxidation. This may be caused by different adsorption of CO molecules on the surface of the catalyst, and hence different resistance of the M@Pt nanostructures to poisoning by CO. In this work we attempt to verify this hypothesis analyzing vibrational spectra of CO adsorbed on various metal nanoparticles. Au@Pt nanoparticles revealing significantly higher catalytic activity towards ethanol oxidation than one-element Pt nanoparticles have been synthesized. Surface-enhanced infrared absorption (SEIRA) spectra of CO adsorbed on Au@Pt and Pt nanoparticles have been measured. Obtained spectra were very similar, which suggests that the higher catalytic activity of Au@Pt nanoparticles is rather not caused by different adsorption of CO molecules on Pt and Au@Pt nanoparticles. We suppose that better performance of core–shell M@Pt nanoparticles than one elements Pt nanoparticles towards ethanol electrochemical oxidation can be explained as follows: core–shell nanoparticles are probably much more defected than one-element nanoparticles, hence the M@Pt nanoparticles posses greater number of active sites (kinks, adatoms, and so on) for ethanol electrochemical oxidation. Analysis of the catalytic activity and CO adsorption have been also carried out for other nanoparticles including: Sn@Pt, Pb@Pt, Pd, Au@Pd, Sn@Pd and Pb@Pd. Density functional theory (DFT) calculations of CO modes for CO adsorbed on tetrahedral Pt₁₀ or Pd₁₀ clusters with different metal–metal distance have been also performed.     

Surface-imprinted core–shell Au nanoparticles for selective detection of bisphenol A based on surface-enhanced Raman scattering

Surface-imprinted core–shell Au nanoparticles (AuNPs) were explored for the highly selective detection of bisphenol A (BPA) by surface-enhanced Raman scattering (SERS). A triethoxysilane-template complex (BPA-Si) was synthesized and then utilized to fabricate a molecularly imprinted polymer (MIP) layer on the AuNPs via a sol–gel process. The imprinted BPA molecules were removed by a simple thermal treatment to generated the imprint-removed material, MIP-ir-AuNPs, with the desired recognition sites that could selectively rebind the BPA molecules. The morphological and polymeric characteristics of MIP-ir-AuNPs were investigated by transmission electron microscopy and Fourier-transform infrared spectroscopy. The results demonstrated that the MIP-ir-AuNPs were fabricated with a 2 nm MIP shell layer within which abundant amine groups were generated. The rebinding kinetics study showed that the MIP-ir-AuNPs could reach the equilibrium adsorption for BPA within 10 min owning to the advantage of ultrathin core–shell nanostructure. Moreover, a linear relationship between SERS intensity and the concentration of BPA on the MIP-ir-AuNPs was observed in the range of 0.5–22.8 mg L⁻¹, with a detection limit of 0.12 mg L⁻¹ (blank ± 3 × s.d.). When applied to SERS detection, the developed surface-imprinted core–shell MIP-ir-AuNPs could recognize BPA and prevent interference from the structural analogues such as hexafluorobisphenol A (BPAF) and diethylstilbestrol (DES). These results revealed that the proposed method displayed significant potential utility in rapid and selective detection of BPA in real samples.     

Facile deposition of gold nanoparticles on core–shell Fe3O4@polydopamine as recyclable nanocatalyst

A simple and green method for the controllable synthesis of core–shell Fe₃O₄ polydopamine nanoparticles (Fe₃O₄@PDA NPs) with tunable shell thickness and their application as a recyclable nanocatalyst support is presented. Magnetite Fe₃O₄ NPs formed in a one-pot process by the hydrothermal approach with a diameter of ∼240 nm were coated with a polydopamine shell layer with a tunable thickness of 15–45 nm. The facile deposition of Au NPs atop Fe₃O₄@PDA NPs was achieved by utilizing PDA as both the reducing agent and the coupling agent. The satellite nanocatalysts exhibited high catalytic performance for the reduction of p-nitrophenol. Furthermore, the recovery and reuse of the catalyst was demonstrated 8 times without detectible loss in activity. The synergistic combination of unique features of PDA and magnetic nanoparticles establishes these core–shell NPs as a versatile platform for potential applications.     

Study on the effects of flame retardants on the thermal decomposition of wood by TG–MS

The effect of three flame retardants, K₂CO₃, Na₂SiO₃·9H₂O, and Na₂B₄O₇·10H₂O on the process and composition of volatile products of the thermal degradation of wood has been investigated by the thermogravimetric (TG), differential thermogravimetry (DTG), differential thermal analysis (DTA), and the synchronous thermogravimetry–mass spectrometry (TG–MS) analysis methods. The results showed that the ion current intensity and ion peak area of m/z = 18 and 44 MS signals were increased by the flame retardants but the ion peak area of m/z = 28 MS signal was decreased (except K₂CO₃) at the meantime. What’s more, the ion current intensity and ion peak area of m/z = 60 and 68 MS signals were also decreased (except K₂CO₃), which mean that Na₂B₄O₇ can significantly enhances the dehydration and inhibits the depolymerization of wood. Although K₂CO₃ accelerates the dehydration reaction, it cannot inhibit the depolymerization reaction effectively, so the flame retardant efficiency of K₂CO₃ is decreased with the higher concentration. The catalysis of dehydration reaction of Na₂SiO₃ is the worst one.     

Biomimetic synthesis of raspberry-like hybrid polymer–silica core–shell nanoparticles by templating colloidal particles with hairy polyamine shell

The nanoparticles composed of polystyrene core and poly[2-(diethylamino)ethyl methacrylate] (PDEA) hairy shell were used as colloidal templates for in situ silica mineralization, allowing the well-controlled synthesis of hybrid silica core–shell nanoparticles with raspberry-like morphology and hollow silica nanoparticles by subsequent calcination. Silica deposition was performed by simply stirring a mixture of the polymeric core–shell particles in isopropanol, tetramethyl orthosilicate (TMOS) and water at 25 °C for 2.5 h. No experimental evidence was found for nontemplated silica formation, which indicated that silica deposition occurred exclusively in the PDEA shell and formed PDEA–silica hybrid shell. The resulting hybrid silica core–shell particles were characterized by transmission electron microscopy (TEM), thermogravimetry, aqueous electrophoresis, and X-ray photoelectron spectroscopy. TEM studies indicated that the hybrid particles have well-defined core–shell structure with raspberry morphology after silica deposition. We found that the surface nanostructure of hybrid nanoparticles and the composition distribution of PDEA–silica hybrid shell could be well controlled by adjusting the silicification conditions. These new hybrid core–shell nanoparticles and hollow silica nanoparticles would have potential applications for high-performance coatings, encapsulation and delivery of active organic molecules.     

Optical and magnetic properties of small-size core–shell Fe3O4@C nanoparticles

Core–shell Fe₃O₄@C magnetic nanoparticles which are of great interest for research have a widely applied prospect. However, people know little about the optical and magnetic properties of the small-size Fe₃O₄@C nanoparticles due to the difficulty of uniformly coating small size Fe₃O₄ nanoparticles. In this paper, the influence of carbon shell coating on the optical and magnetic properties of small size Fe₃O₄ nanoparticles was presented. Carbon coating can strengthen the absorption intensity in the UV–visible light region through the introduction of oxygen defects on the surface of the nanoparticles by nitric acid treatment. Fe₃O₄ and Fe₃O₄@C nanoparticles both display typical superparamagnetic behavior in the high-temperature regime and a blocked state at low temperature from hysteresis loop, zero-field cooled and field cooled curves. Carbon coating reduce the surface uniaxial anisotropy, thus the average blocking temperature <T_B> decreases from 59 K of Fe₃O₄ nanoparticles to 50 K of Fe₃O₄@C nanoparticles.     

Preparation of pH- and thermo-sensitive chitosan-PNIPAAm core–shell nanoparticles and evaluation as drug carriers

Environmentally sensitive polysaccharide nanoparticles (NPs) were prepared by in situ polymerization of N-isopropylacrylamide (NIPAAm) monomer in the presence of chitosan (CS) micelles. First, CS was found to develop a cationic micelle-like structure in the acetic acid solution when its concentration was increased to above the critical micelle concentration, as evidenced by fluorescence and TEM. When the NIPAAm was polymerized in the CS micelle solution by using potassium persulfate as initiator, the produced PNIPAAm with anionic chain end(s) became hydrophobic, as long as the reaction temperature was above its phase transition temperature; and therefore it would diffuse into the hydrophobic core of the CS micelles, producing CS-PNIPAAm core–shell NPs. Increasing the feeding amount of NIPAAm increased the monomer conversion and therefore the particle size; yet it decreased the surface zeta potential. Moreover, the CS-PNIPAAm NPs were sensitive to both pH value and temperature. For the study of drug release properties, doxycycline hyclate was used as a model drug and loaded into the NPs at pH 4.5 and 25 °C. The result illustrated that these NPs had a continuous drug release behavior up to 1 week, depending on the pH value and temperature. In addition, enzyme or hydrogen peroxide capable of degrading CS shell was added in the solution to facilitate the drug release.     

Study of the adsorption behavior ¶of heavy metal ions on nanometer-size ¶titanium dioxide with ICP-AES

A new method using nanoparticle TiO₂ as solid-phase extractant coupled with ICP-AES was proposed for simultaneous determination of trace elements. The adsorption behavior of nanometer TiO₂ towards Cu, Cr, Mn and Ni was investigated by ICP-AES, and the adsorption pH curves, adsorption isotherms and adsorption capacities were obtained. It was found that the adsorption rates of the metal ions studied were more than 90% in pH 8.0～9.0, and 2.0 mol L^–1 HCl was sufficient for complete elution. Nanometer TiO₂ possesses a significant capacity for the sorption of the metal ions studied which is higher than the capacity of silica, the commonly used extractant. The method has been applied to the analysis of some environmental samples with satisfactory results.     

Study of the thermal behavior of the transition phase of Co(II)–diclofenac compound by non-isothermal method

The Co(II)–diclofenac complex was evaluated by simultaneous thermogravimetry-differential thermal analysis (TG-DTA) and differential scanning calorimetry (DSC). The DTA curve profile shows one exothermic peak because of the transition phase of the compound between 170 and 180 °C, which was confirmed by X-ray powder diffractometry. The transition phase behavior was studied by DSC curves at several heating rates of a sample mass between 1 and 10 mg in nitrogen atmosphere and in a crucible with and without a lid. Thus, the kinetic parameters were evaluated using an isoconversional non-linear fitting proposed by Capela and Ribeiro. The results show that the activation energy and pre-exponential factor for the transition phase is dependant on the different experimental conditions. Nevertheless, these results indicate that the kinetic compensation effect shows a relationship between them.