Polymerization of β-cyanopropionaldehyde. IV. Polymerization by the adducts of β-cyanopropionaldehyde with triethylaluminum

Adducts (X, Y, and Z) between triethylaluminum and β-cyanopropionaldehyde (CPA) have been prepared and characterized. It was found that an equimolar amount of triethylaluminum undergoes Grignard type addition reaction with aldehyde group of CPA to give aluminum alkoxide and that another equimolar quantity of triethylaluminum undergoes coordination with the nitrile group of CPA (adduct X, in which the molar ratio of CPA to aluminum is 1:2). The coordinated triethylaluminum in adduct X may be changed to aluminum alkoxide by the addition of further equimolar amount of CPA (adduct Y, molar ratio = 1:1); on the other hand, heating at 130°C affords mixtures of aluminum aldimine and aluminum ketenimine structures (adduct Z, molar ratio = 1:2). From the cryoscopic measurement, adduct Z may be regarded as a coordinated polymer joined through bridged structures I and II. In the polymerization of CPA at ?78°C, the stereoregularity of the resulting poly-(cyanoethyl)oxymethylene was found to increase in the order: X < triethylaluminum < Y < Z. The polymerizations with triethylaluminum, X, and Y are considered to be initiated by NCCH₂CH₂CH(C₂H₅)? O? Al(C₂H₅)₂. The degree of association of the species may influence the stereoregularity of the polymer.     

Crystal Structure of Carboxypeptidase a Complexed with an Inactivator in a New Crystalline Form

1INTR0DUCTIONInrecentyears,zinc-containingmeta1loenzymeshavereceivedspecialattentionbecauseoftheroletheyplayintheetiologyofmanyseriousdiseases.Theyserveastargetsinthedesignoftherapeuticallyusefulinhibitorsoftheseenzymes.Inthisre-spect,carboxypeptidaseA(CPA),awell-studiedzinc-containingmetalloex-opeptidase,bearsanunusualimportancebecauseitservesasamodelformanymetal-loenzymes.Thetertiarystructure0fCPAinc1udingthatoftheactivesitehasbeenwellcharacterizedalth0ughthecataIyticmechanismatthemo…     

LC-ion trap electrospray MS-MS for the determination of cyclopiazonic acid in milk samples

An LC-ESI-MS (negative ions) method was developed for the determination of cyclopiazonic acid (CPA), a mycotoxin produced by many Aspergillus and Penicillium genuses, in milk samples. First, the acquisition parameters of the ESI mass spectrometer were optimised for deprotonated CPA and MS-MS measurements were performed, giving a fragmentation pattern. After this stage, LC separation was applied to milk extracts (with or without CPA spikes) by means of an aminic column, using the selective reaction monitoring (SRM) acquisition mode for MS detection. The CPA response was linear over three decades of concentration and an LOD of 5 ng mL(-1) was estimated; moreover, the extraction procedure produced almost quantitative recoveries of CPA from milk. Twenty different milk samples were analysed and three of them were found to be contaminated with CPA to various extents.     

Mechanistic insight into the inactivation of carboxypeptidase A by alpha-benzyl-2-oxo-1,3-oxazolidine-4-acetic acid, a novel type of irreversible inhibitor for carboxypeptidase A with no stereospecificity

On the basis of the active site topology and enzymic catalytic mechanism of carboxypeptidase A (CPA), a prototypical zinc-containing proteolytic enzyme, alpha-benzyl-2-oxo-1,3-oxazolidine-4-acetic acid (1), was designed as a novel type of mechanism-based inactivator of the enzyme. All four possible stereoisomers of the inhibitor were synthesized in an enantiomerically pure form starting with optically active aspartic acid, and their CPA inhibitory activities were evaluated to find that surprisingly all of the four stereoisomers inhibit CPA in a time dependent manner. The inhibited enzyme did not regain its enzymic activity upon dialysis. The inactivations were prevented by 2-benzylsuccinic acid, a competitive inhibitor that is known to bind the active site of the enzyme. These kinetic results strongly support that the inactivators attach covalently to the enzyme at the active site. The analysis of ESI mass spectral data of the inactivated CPA ascertained the conclusion from the kinetic results. The values of second-order inhibitory rate constants (k(obs)/[I](o)) fall in the range of 1.7-3.6 M(-1) min(-1). The lack of stereospecificity shown in the inactivation led us to propose that the ring cleavage occurs by the nucleophilic attack at the 2-position rather than at the 5-position and the ring opening takes place in an addition-elimination mechanism. The tetrahedral transition state that would be generated in this pathway is thought to be stabilized by the active site zinc ion, which was supported by the PM3 semiemprical calculations. In addition, alpha-benzyl-2-oxo-1,3-oxazolidine-5-acetic acid (18), a structural isomer of 1 was also found to inactivate CPA in an irreversible manner, reinforcing the nucleophilic addition-elimination mechanism. The present study demonstrates that the transition state for the inactivation pathway plays a critical role in determining stereochemistry of the inactivation.     

The unprecedented preparation of dinuclear zinc(II) complexes from 4-halido-2-[(3-cyclohexylaminopropylimino)methyl]phenol

Three new centrosymmetric trinuclear nickel(II) and manganese(II) complexes, Ni[Ni(CH(3)COO)(CPA)](2) (1), Ni[Ni(CH(3)COO)(BPA)](2) (2), Mn[Mn(CH(3)COO)(BPA)](2) (3), where H(2)CPA = N,N'-bis(5-chlorosalicylidene)-1,3-propanediamine, H(2)BPA = N,N'-bis(5-bromosalicylidene)-1,3-propanediamine, and two new centrosymmetric dinuclear zinc(II) complexes, [Zn(2)(CMP)(2)] (4) and [Zn(2)(BMP)(2)] (5), where H(2)CMP = 4-chloro-2-{[3-(5-chloro-2-hydroxybenzyl)aminopropylimino]methyl}phenol, and H(2)BMP = 4-bromo-2-{[3-(5-bromo-2-hydroxybenzyl)aminopropylimino]methyl}phenol, have been prepared from the Schiff bases derived from 5-halido-substituted salicylaldehydes with N-hexylpropane-1,3-diamine under solvothermal conditions. The complexes have been characterised by elemental analysis, IR spectroscopy and single-crystal X-ray diffraction studies. The complexes 1, 2, and 3 crystallise in the monoclinic space group P2(1)/c with cell dimensions a = 9.347(1), b = 11.507(2), c = 18.539(2) ?, β = 93.774(2)°, Z = 2 (for 1), a = 9.111(4), b = 12.089(6), c = 18.724(8) ?, β = 92.117(7)°, Z = 2 (for 2), and a = 11.328(2), b = 22.468(5), c = 8.270(2) ?, β = 93.74(3)°, Z = 2 (for 3), while complexes 4 and 5 crystallise in the triclinic space group P1, with cell dimensions a = 7.483(1), b = 9.990(2), c = 12.155(2) ?, α = 75.27(3), β = 85.00(3), γ = 73.82(3)°, Z = 1 (for 4), and a = 7.008(1), b = 10.081(2), c = 13.095(3) ?, α = 100.62(3), β = 95.51(3), γ = 104.03(3)°, Z = 1 (for 5). It is interesting that the mono-Schiff bases 4-chloro-2-[(3-cyclohexylaminopropylimino)methyl]phenol (HCCP) and 4-bromo-2-[(3-cyclohexylaminopropylimino)methyl]phenol (HBCP) used to prepare the nickel(II) and manganese(II) complexes were transferred to bis-Schiff bases H(2)CPA and H(2)BPA in the complexes 1, 2, and 3, while the mono-Schiff bases HCCP and HBCP used to prepare the zinc(II) complexes were transferred to novel ligands H(2)CMP and H(2)BMP, bearing the unexpected, newly formed carbon-nitrogen single bond.     

Molecular Docking and Design of Novel Heterodimers of Donepezil and Huperzine Fragments as Acetylcholinesterase Inhibitors

To provide hints for the design of new acetylcholinesterase(ACh E) inhibitors with higher potency and specificity, the binding modes of novel heterodimers comprised of donepezil and huperzine A fragments with ACh E were explored by employing the docking simulations. The results show that the binding mode of S-17b(the most potent inhibitor in Ref. 2, i.e., Bioorg. Med. Chem. 2013, 21, 676-683) is clearly different from that of donepezil, while the binding modes of other heterodimers in Ref. 2 are the same as that of donepezil. In addition, based on the binding mode and structure modification of S-17 b, two novel inhibitors(S-17b1 and S-17bb1) with much higher inhibitory potency than S-17 b were obtained. Our design strategy was to replace the hupyridone moiety of S-17 b with the bulky group, and to replace the dimethoxyindanone moiety of S-17 b with more hydrophobic and bulky group with a highly positive charge, which would result in generating potent and selective AChE inhibitors.     

Immobilization of Carboxypeptidase A into Modified Chitosan Matrixes by Covalent Attachment

Carboxypeptidase A (CPA) is a metalloexopeptidase that catalyzes the hydrolysis of the peptide bonds that are adjacent to the C-terminal end of a polypeptide chain. The enzyme preferentially cleaves over C-terminal L-amino acids with aromatic or branched side chains. This is of main importance for food industry because it can be employed for manufacturing functional foods from different protein sources with reduced hydrophobic amino acid content for patients with deficiencies in the absorption or digestion of the corresponding amino acids. In that way, strategies for effective multipoint covalent immobilization of CPA metalloenzyme on chitosan beads have been developed. The study of the ability to produce several chemical modifications on chitosan molecules before, during and after its coagulation to form carrier beads lead in a protective effect of the polymer matrix. The chemical modification of chitosan through the use of an N-alkylation strategy produced the best derivatives. N-alkyl chitosan derivative beads with D-fructose presented values of 0.86 for immobilization yield, 314.6 IU g^?1 bead for initial activity of biocatalyst and were 5675.64-fold more stable than the free enzyme at 55 °C. Results have shown that these derivatives would present a potential technological application in hydrolytic processes due to both their physical properties, such as low swelling capacity, reduced metal chelation ability and bulk mesoporosity, and increased operational stability when compared with soluble enzyme.     

Study of pH-dependent zinc(II)-carboxamide interactions by zinc(II)-carboxamide-appended cyclen complexes (cyclen = 1,4,7,10-tetraazacyclododecane)

To elucidate intrinsic recognition of carboxamides by zinc(II) in carbonic anhydrase (CA) (as inhibitors) and carboxypeptidase A (CPA) (as substrates), a new series of Zn(2+)-carboxamide-appended cyclen complexes have been synthesized and characterized (cyclen = 1,4,7,10-tetraazacyclododecane). Two types of Zn(2+)-carboxamide interactions have been found. In the first case represented by a zinc(II) complex of carbamoylmethyl-1,4,7,10-tetraazacyclododecane (L(1)), the amide oxygen binds to zinc(II) at slightly acidic pH (to form ZnL(1)), and the deprotonated amide N(-) binds to zinc(II) at alkaline pH (to form ZnH(-1)L(1)) with pK(a) = 8.59 at 25 degrees C and I = 0.1 (NaNO(3)), as determined by potentiometric pH titrations, infrared spectral changes, and (13)C and (1)H NMR titrations. The X-ray crystal structure of ZnH(-1)L(3) (where L(3) = N-(4-nitrophenyl)carbamoylmethyl cyclen, pK(a) = 7.01 for ZnL(3) <==> ZnH(-1)L(3)) proved that the zinc(II) binds to the amidate N(-) (Zn-N(-) distance of 1.974(3) A) along with the four nitrogen atoms of cyclen (average Zn-N distance 2.136 A). Crystal data: monoclinic, space group P2(1)/n (No. 14) with a = 10.838(1) A, b = 17.210(2) A, c = 12.113(2) A, b = 107.38(1) degrees, V = 2156.2(5) A(3), Z = 4, R = 0.042, and R(w) = 0.038. These model studies provide the first chemical support that carboxamides are CA(-) inhibitors by occupying the active Zn(2+) site both in acidic and alkaline pH to prevent the occurrence of the catalytically active Zn(2+)-OH(-) species. In the second case represented by a zinc(II) complex of 1-(N-acetyl)aminoethylcyclen, ZnL(6), the pendant amide oxygen had little interaction with zinc(II) at acidic pH. At alkaline pH, the monodeprotonation yielded a zinc(II)-bound hydroxide species ZnL(6)(OH(-)) (pK(a) = 7.64) with the amide pendant remaining intact. The ZnL(6)(OH(-)) species showed the same nucleophilic activity as Zn(2+)-cyclen-OH(-). The second case may mimic the Zn(2+)-OH(-) mechanism of CPA, where the nucleophilic Zn(2+)-OH(-) species does not act as a base to deprotonate a proximate amide.     

GLC Determination of Chlorpheniramine in Human Plasma Using a Nitrogen Sensitive Thermionic Detector

Abstract

A highly sensitive procedure for the determination of plasma levels of the antihistamine, chlorpheniramine (CPA) is presented. Following the administration of therapeutic doses (4–8 mg) of CPA, plasma levels of the drug can be expected to be low. To reliably and accurately measure such levels, an ultrasensitive means of determining the concentration is required. A preliminary extraction with ether, a back-wash into acid, a final basic extraction into hexane with subsequent measurement by a gas chromatograph equipped with a nitrogen sensitive detector, provides the required selectivity, sensitivity and speed of analysis. In an expenditure of less than 10 minutes, 1 ng of CPA per ml of plasma can be reliably determined.     

Synthesis and curing of a novel amino-containing phthalonitrile derivative

A novel phthalonitrile derivative containing an amino group, 3,5-bis(3,4-dicyanophenoxy)aniline (CPA), was synthesized via a nucleophilic displacement of 4-nitrophthalonitrile and 5-aminoresorcinol hydrochloride. The structure of CPA was confirmed by Fourier transform infrared spectra (FT-IR) and nuclear magnetic resonance (1H NMR). Thermal analysis performed on CPA revealed that the novel phthalonitrile derivative showed a self-promotion curing behavior and the resulting polymer exhibited outstanding heat-resistance.     

Formamidinium Lead Iodide-Based Inverted Perovskite Solar Cells with Efficiency over 25 % Enabled by An Amphiphilic Molecular Hole-Transporter

Formamidinium lead iodide (FAPbI₃) represents an optimal absorber material in perovskite solar cells (PSCs), while the application of FAPbI₃ in inverted-structured PSCs has yet to be successful, mainly owing to its inferior film-forming on hydrophobic or defective hole-transporting substrates. Herein, we report a substantial improvement of FAPbI₃-based inverted PSCs, which is realized by a multifunctional amphiphilic molecular hole-transporter, (2-(4-(10H-phenothiazin-10-yl)phenyl)-1-cyanovinyl)phosphonic acid (PTZ−CPA). The phenothiazine (PTZ) based PTZ−CPA, carrying a cyanovinyl phosphonic acid (CPA) group, forms a superwetting hole-selective underlayer that enables facile deposition of high-quality FAPbI₃ thin films. Compared to a previously established carbazole-based hole-selective material (2-(3,6-dimethoxy-9H-carbazol-9-yl)ethyl)phosphonic acid (MeO−2PACz), the crystallinity of FAPbI₃ is enhanced and the electronic defects are passivated by the PTZ−CPA more effectively, resulting in remarkable increases in photoluminescence quantum yield (four-fold) and Shockley-Read-Hall lifetime (eight-fold). Moreover, the PTZ−CPA shows a larger molecular dipole moment and improved energy level alignment with FAPbI₃, benefiting the interfacial hole-collection. Consequently, FAPbI₃-based inverted PSCs achieve an unprecedented efficiency of 25.35 % under simulated air mass 1.5 (AM1.5) sunlight. The PTZ−CPA based device shows commendable long-term stability, maintaining over 90 % of its initial efficiency after continuous operation at 40 °C for 2000 hours.     

High Enrichment of MMP-9 and Carboxypeptidase A by Tweezing Adsorptive Bubble Separation (TABS)

Tweezing adsorptive bubble separation (TABS) was used as a method for the enrichment of matrix metalloproteinases (92-kDa type IV, gelatinase B (MMP-9)) and carboxypeptidase A (CPA) from dilute aqueous solutions. The method is based on the chelation of metalloenzymes applying 2-(carbamoylmethyl-(carboxymethyl)amino)acetic acid (ADA) coupled with an octyl part to form a surface active unit. MMP-9 could be enriched with an enrichment ratio of 12.0 and a recovery of 87.3%, and CPA could be enriched 18.8-fold and with 95.3% recovery. Both enzymes were enriched without significant losses of enzymatic activity. To verify that the enzymes were tweezed by ADA-C8 without abstraction of the zinc ions from the active center, TABS trials were additionally conducted with zinc ions in complex with ADA-C8, which revealed only negligible enrichment ratios of the enzymes (2.2 for MMP-9 and 0.2 for CPA). The results obtained impressively demonstrate that zinc-containing proteases can be enriched selectively and efficiently by TABS.     

On-chip characterization of cryoprotective agent mixtures using an EWOD-based digital microfluidic device

For tissue engineering and regenerative medicine, cryopreservation, a technique for preserving biomaterials in the frozen state with cryoprotective agents (CPAs), is critically important for preserving engineered tissues (ETs) as well as cells necessary to create ETs. As more diverse ETs are produced using various cell types, CPAs and corresponding freeze/thaw (F/T) protocols need to be developed cell/tissue-type specifically. This is because CPAs and F/T protocols that have been successful for one cell/tissue type have proven to be difficult to adapt to other cell/tissue types. The most critical barrier to address this challenge is the inability to screen and identify CPA or CPA mixtures efficiently. In this paper, we developed an "electro-wetting-on-dielectic" (EWOD) based digital microfluidic platform to characterize and screen CPA mixtures cell-type specifically. The feasibility of the EWOD platform was demonstrated by characterizing and optimizing a mixture of dimethlysulfoxide (DMSO) and PBS for human breast cancer cell line as model CPA mixture and cell line. The developed platform multiplexed droplets of DMSO and PBS to create an array of DMSO-PBS mixtures, and mapped the phase change diagram of the mixture. After loading cell suspensions on the platform, the mixture was further screened on-chip for toxicity and cryoprotection. The results were discussed to illustrate the capabilities and limitations of the EWOD platform for cell and tissue-type specific optimization of CPA mixtures and F/T protocols.     

Scale-up potential of ion-pair high-performance liquid chromatography method to produce biologically active inositol phosphates

This study was undertaken to evaluate the possibility that an analytical ion-pair HPLC procedure used to determine phytic acid (IP6) and its degradation products (IP3-IP5) can be transformed to a preparative purification method. A commercial phytic acid (CPA) preparation was separated into its component fractions of IP3, IP4, IPS, and IP6 on two C18 columns (1.8 and 4.2 ml) using 51% methanol containing 0.6-1% tetrabutylammonium hydroxide as ion-pair reagent and 0-0.025 M formic acid (pH 4.3) as eluent at 1.7 and 3.0 cm/min linear velocity, respectively, and 40 degrees C. Elution was monitored at 40 degrees C by a refractive index detector. Reproducible separation of CPA into four well-resolved peaks on these columns was possible after optimizing method variables, particularly the concentration of ion-pair reagent in the injected sample (>1.5%). The same separations were obtained after CPA loads were scaled up 25 times on a steel column (15 cm x 19 mm I.D.), packed with Ethyl C2 sorbent (10 microm) and on a 25 cm x 21.2 mm I.D. C18 column, but at a reduced linear velocity to increase the resolution. Therefore, this optimization of separation not only is useful for analysis of phytic acid and its degradation products but also it provides key parameters for scale up for further fractionation and characterization.     

Gold nanoparticles with cyclic phenylazomethines: one-pot synthesis and metal ion sensing

New gold nanoparticles covered with cyclic phenylazomethine (CPA) were obtained by a one-pot synthesis. It is confirmed by XPS that imines of CPA in the nanoparticles (Au-CPA) are partially reduced to amines. The amine part of CPA in Au-CPA is attached to the surfaces of gold nanoparticles, and the imine part works as a redox-active site. A glassy carbon electrode modified with Au-CPA was revealed to work as an electrochemical probe for metal ion sensing.     

A definitive synthesis of D-myo-inositol 1,4,5,6-tetrakisphosphate and its enantiomer D-myo-inositol 3,4,5,6-tetrakisphosphate from a novel butane-2,3-diacetal-protected inositol

New and rapid syntheses of the enantiomeric intracellular signalling molecules d-myo-inositol 1,4,5,6-tetrakisphosphate (1 a) and D-myo-inositol 3,4,5,6-tetrakisphosphate (1 b) are described. The synthetic strategy employs the novel butane-2,3-diacetal-protected (BDA-protected) myo-inositol (+/-)-3 ab, directly accessible from myo-inositol on a large scale, and an optical resolution with diastereoisomeric (R)-(-)-acetylmandelate esters. The X-ray crystal structure of (+/-)-4, an unusual side product of acid-catalysed reaction of myo-inositol with butanedione is also presented, and the absolute configurations of 1 a and 1 b are definitively assigned by conversion of key precursors into (+)-bornesitol and L-iditol hexaacetate, respectively. Biological activity of synthetic 1 b was confirmed in comparison with the natural polyphosphate.     

Amino-bonded silica as stationary phase for liquid chromatographic determination of cyclopiazonic acid in fungal extracts

A new high-performance liquid (HPLC) chromatographic method is described for cyclopiazonic acid (CPA) determination in fungal cultures on a propylamino-bonded stationary phase with a CH3CN/CH3COONH4 buffer as mobile phase. Retention of CPA on propylamino modified silica under acidic conditions (protonated amino groups and deprotonated CPA) is governed by a mixed ion-exchange-reversed-phase mechanism. In addition to non-polar (hydrophobic) interactions, polar interactions with the surface silanols are also possible and become important as the polarity of the mobile phase decreases. A detection limit of 25 pg of CPA standard is obtained that represents an improvement of more than two orders of magnitude compared to existing HPLC procedures. UV-detector response was linear to 200 ng of CPA. Fungal extracts can be analysed after a simple dilution step with UV diode array detection that provides peak identity/purity assessment. The suitability of the proposed method as a rapid confirmatory test to assess the toxigenic potential of different Aspergillus and Penicillium strains is demonstrated by the analysis of 54 fungal extracts.     

Optical 2-benzyl-5-hydroxy-4-oxopentanoic acids against carboxypeptidase A: synthesis, kinetic evaluation and X-ray crystallographic study

<正>2-Benzyl-5-hydroxy-4-oxopentanoic acid 1 and its enantiomers were designed,synthesized and assayed for inhibitory activity against carboxypeptidase A(CPA,EC 3.4.17.1).To verify the role of the terminal hydroxyl group in 1 binding to CPA,2-benzyl-5- benzyloxy-4-oxopentanoic acid 2 was also synthesized and evaluated.The inhibition constants show that both L-1 and D-1 were shown to have strong binding affinity with L-1 being more potent than its enantiomer by 165-fold.On the other hand,the inhibition constant of 2 increases 4-fold comparing with that of 1.In order to explore the exact binding mode of the hydroxyacteyl group of 1 to the active site zinc ion of CPA,we have solved the crystal structure of CPA complexed with L-1 up to 1.85(?) resolution.In CPA·L-1 complex,the phenyl ring is fitted in the substrate recognition pocket at the S′_1 subsite,and the carboxylate forms bifurcated hydrogen bonds with the guanidinium moiety of Arg-145 and Arg-127 and a hydrogen bond with the phenolic hydroxyl of the down-positioned Tyr-248.The carbonyl oxygen of L-1 does coordinate to the active site zinc ion of CPA as expectedly.Unexpectedly,the terminal hydroxyl group of L-1 is engaged in hydrogen bonding with carbonyl oxygen of Ser-197 instead of coordinating to the active site zinc ion.     

Volatile components of Centaurea bracteata and C. pannonica subsp. pannonica growing wild in Croatia

This paper reports on the volatile components of oils from the aerial parts (CBA) and roots (CBR) of Centaurea bracteata Scop. and aerial parts of C. pannonica (Heuffel) Simonkai subsp. pannonica (CPA), two Asteraceae growing wild in Croatia. The volatile components, obtained by hydrodistillation, were determined by GC-MS analysis. The yields (w/w) of the dried oils were 0.10% (CBA), 0.22% (CBR) and 0.09% (CPA), respectively. A total of 91 compounds were identified accounting for 91.1%, 93.3% and 87.9% of the total oil for CBA, CBR and CPA, respectively. All the samples were characterized mainly by hydrocarbons (7.1-34.1%), fatty acids (9.7-45.9%), and oxygenated sesquiterpenes (15.2-16.6%). The major components of the samples were hexadecanoic acid (8.1-31.1%), nonacosane (0.6-13.4%) and caryophyllene oxide (4.5-11.9%). Monoterpenes, both hydrocarbons and oxygenated, were either absent or present in low amounts in all the oils. The similarity in the oil contents is consistent with the two species being placed in the same section, Jacea.     

稀土元素及其显色效应的研究 VI:镧-偶氮氯膦III——-钇混合多核配合物的生成

The interference of lanthanum in the spectrophotometric determination of yttrium in the form of β-type complex with chlorophosphonazo III (CPA III) is proved to be a cocoloration effect. It is due to the formation of a mixed polynuclear complex between CPA III and lanthahum-yttrium with a cyclic structure. The composition of the complex has been established to be La:CPA III:Y = 1:2:1 by the method of molar ratio. The optimal conditions for the formation of polynuclear complex and influence factors have also been studied. A "replacement type" reaction is proposed to account for the cocoloration effect.