Synthesis,Structure, Electrochemistry and Fluorescence Properties of a One-dimensional Coordination Polymer {[ CdLu-（4,4＇-dps） ]2（H2O）2]＇（4＇abs ）2（H2O）2

A new cadmium（N） compound, {[ CdLu-（4,4＇-dps） ]2（H2O）2]＇（4＇abs ）2（H2O）2n 1 （4,4＇-dps = 4,4＇-dipyridylsulfide, 4-abs = deprotonated 4-amino benzenesulfonic acid）, has been synthesized and structurally characterized. It belongs to the orthorhombic system, space group Pbcn with a = 19.950（3）, b = 10.6381（13）, c = 18.055（2）A, V= 3831.8（8） A3, Z = 4, C32H36CdN6010S4, Mr = 905.31, F（000） = 1848, μ= 0.850 mm^-1, Dc = 1.569 Mg/m^3, the final R = 0.0238 and wR = 0.0589 for 3080 observed reflections with I 〉 2σ（I）. Complex I is a one-dimensional linear chain coordination polymer and the repeat unit is comprised of doubly charged cadmium complex cation, uncoordinated 4-aminobenzene sulfonate anions and water molecules. The cadmium（H） ion adopts a six-coordinate distorted octahedral geometry. Complex 1 is stabilized and linked into a three-dimensional layered structure through intermolecular O-H…O and N-H…O hydrogen bonds together with electrostatic force. The cyclic voltammograms and fluorescence spectrum of 1 were also measured. It shows one irreversible redox process and emits a very strong and sharp fluorescent band at about 341 nm.     

Formal and standard ruthenium-catalyzed [2 + 2 + 2] cycloaddition reaction of 1,6-diynes to alkenes: a mechanistic density functional study

"Formal" and standard Ru(II)-catalyzed [2 + 2 + 2] cycloaddition of 1,6-diynes 1 to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. The neutral Ru(II) catalyst was formed in situ by mixing equimolecular amounts of [Cp*Ru(CH3CN)3]PF6 and Et4NCl. Two isomeric bicyclic 1,3-cyclohexadienes 3 and 8 were obtained depending on the cyclic or acyclic nature of the alkene partner. Mechanistic studies on the Ru catalytic cycle revealed a clue for this difference: (a) when acyclic alkenes were used, linear coupling of 1,6-diynes with alkenes was observed giving 1,3,5-trienes 6 as the only initial reaction products, which after a thermal disrotatory 6e-pi electrocyclization led to the final 1,3-cyclohexadienes 3 as probed by NMR studies. This cascade process behaved as a formal Ru-catalyzed [2 + 2 + 2] cycloaddition. (b) With cyclic alkenes, the standard Ru-catalyzed [2 + 2 + 2] cycloaddition occurred, giving the bicyclic 1,3-cyclohexadienes 8 as reaction products. A complete catalytic cycle for the formal and standard Ru-catalyzed [2 + 2 + 2] cycloaddition of acetylene and cyclic and acyclic alkenes with the Cp*RuCl fragment has been proposed and discussed based on DFT/B3LYP calculations. The most likely mechanism for these processes would involve the formation of ruthenacycloheptadiene intermediates XXIII or XXVII depending on the alkene nature. From these complexes, two alternatives could be envisioned: (a) a reductive elimination in the case of cyclic alkenes 7 and (b) a beta-elimination followed by reductive elimination to give 1,3,5-hexatrienes 6 in the case of acyclic alkenes. Final 6e-pi electrocyclization of 6 gave 1,3-cyclohexadienes 3.     

Electron-transfer-induced intermolecular [2+2] cycloaddition reactions based on the aromatic "redox tag" strategy

Novel electron-transfer-induced intermolecular [2+2] cycloaddition reactions between an aliphatic cyclic enol ether and several unactivated olefins have been demonstrated on the basis of the aromatic "redox tag" strategy. The aromatic "redox tag" was oxidized during the formation of the cyclobutane ring, affording the relatively long-lived aromatic radical cation, which was then reduced to complete the overall reaction that constructed the corresponding [2+2] cycloadducts. The aromatic "redox tag" was also found to facilitate electron-transfer-induced cycloreversion reactions of cyclobutane rings.     

Transformation of oxiranes into other oxygen-containing heterocyclic systems

The review analyzes published data on the transformations of epoxy derivatives into other oxygen-containing heterocyclic systems, such as cyclic ethers (including cage-like structures), dioxolanes, ortho esters, lactones, and cyclic carbonates, some of which occur in the nature and exhibit biological activity. Reaction mechanisms involving heterolytic, homolytic, enzymatic, and single-electron transfer processes, as well as [2+2]- and [3+3]-cycloadditions, are discussed.Translated from Zhurnal Organicheskoi Khimii, Vol. 40, No. 9, 2004, pp. 1279–1432.Original Russian Text Copyright © 2004 by L. Kasyan, Tarabara, A. Kasyan.     

Improved electrochemical hydrogen storage properties of Mg-Y thin films as a function of substrate temperature

Pd-capped Mg_(78)Y_(22) thin films have been prepared by direct current magnetron co-sputtering system at different substrate temperatures and their electrochemical hydrogen storage properties have been investigated.It is found that rising substrate temperature to 60 ℃ can coarsen the surface of thin film,thus facilitating the diffusion of hydrogen atoms and then enhancing its discharge capacity to ~1725 mAh·g~(-1).Simultaneously,the cyclic stability is effectively improved due to the increased adhesion force between film and substrate as a function of temperature.In addition,the specimen exhibits a very long and flat discharge plateau at about —0.67 V,at which nearly 60%of capacity is maintained.The property is favorable for the application in metal hydride/nickel secondary batteries.The results indicate that rising optimal substrate temperature has a beneficial effect on the electrochemical hydrogen storage of Mg-Y thin films.     

Electrochemical Preparation,Characterization, and Electrocatalytic Properties of OsPtCl6 Film Electrodes Towards Reduction of NAD+, Chloroacetic Acids,and Nitrous Oxide

Stable electroactive mixed films of osmium oxide/hexachloroplatinate, osmium oxide and platinum have been deposited on different electrode materials by cycling the electrode potential repetitively in solution containing Os³⁺ and PtCl . The film growth of was monitored by using cyclic voltammetry and electrochemical quartz crystal microbalance (EQCM). The cyclic voltammetric features of modified electrode in Os³⁺ solution resembles that of surface wave, and involves ions‐exchange with Os³⁺ ions present in the solution. Based on the SEM results the modifier was considered as one‐dimensional, mixed‐valent polymeric film, and stabilized by Os^3+/2+ counter ions. Finally, the electrocatalytic activity of the modified electrode was examined toward reduction of NAD⁺, chloroacetic acids and nitrous oxide.     

Termolecular ion-molecule reactions in Titan’s atmosphere. II: The structure of the association adducts of HCNH+ with C2H2 and C2H4

The ion-molecule reactivity of the products formed in the association reactions of HCNH+ with C2H2 (C3H4N+) and C2H4 (C3H6N+) has been investigated to provide information on the structures of the adducts thus formed. The C3H4N+ and C3H6N+ adducts were formed in the reaction flow tube of a flowing afterglow sourced-selected ion flow tube (FA-SIFT) and their reactivity with a neutral molecular "probe" examined. The reactivity of possible known structural isomers for the C3H4N+ and C3H6N+ ions was investigated in both the FA-SIFT and an ion cyclotron resonance spectrometer (ICR). Ab initio investigations of the potential energy surfaces for both structures at the G2(MP2) level have also been performed and structures corresponding to local minima on both surfaces have been identified and evaluated. The results of these experimental and theoretical studies show that at room temperature, the C3H4N+ adduct ion contains two isomers; a less reactive one that is likely to be a four-membered cyclic covalent isomer (approximately 70%) and a faster reacting component that is probably an electrostatic complex (approximately 30%). The C3H6N+ adduct ion formed from HCNH+ + C2H4 at room temperature is a single isomer that is likely to be the four-membered covalently bound cyclic CH2CH2CHNH+ species.     

Recent advances in "formal" ruthenium-catalyzed [2+2+2] cycloaddition reactions of diynes to alkenes

"Formal" and standard RuII-catalyzed [2+2+2] cycloaddition of 1,6-diynes to alkenes gave bicyclic 1,3-cyclohexadienes in relatively good yields. When terminal 1,6-diynes 1 were used, two isomeric bicyclic 1,3-cyclohexadienes 4 or 6 were obtained, depending on the acyclic or cyclic nature of the alkene partner. When unsymmetrical substituted 1,6-diynes 7 were used, the reaction with acyclic alkenes took place regio- and stereoselectively to afford bicyclic 1,3-cyclohexadienes 8. A cascade process that behaves as a "formal" RuII-catalyzed [2+2+2] cycloaddition explained these results. Initially, a Ru-catalyzed linear coupling of 1,6-diynes 1 and 7 with acyclic alkenes occurs to give open 1,3,5-trienes of type 3, which after a thermal disrotatory 6e(-) pi-electrocyclization led to the final 1,3-cyclohexadienes 4 and 8. When disubstituted 1,6-diyne 10 was used with electron-deficient alkenes, new exo-methylene cyclohexadienes 12 arose from a competitive reaction pathway.     

Hydrolysis of cyclic phosphoramides. Evidence for syn lone pair catalysis

Hydrolysis between 1.5 < pH < 4 of five and six membered cyclic phosphoramides has been followed by UV and 3'PNMR spectroscopy. The observed rates fit the equation: k(obs) = k(H2O) [H+]/([H+] + Ka) + k'(H2O), where k(H2O) and k'(H2O) are the pseudo first-order rate constants of water attack on the protonated phosphoramide and its unprotonated form, respectively, and Ka is the phosphoramide acidity equilibrium constant. Although, faster hydrolysis rates on the five membered ring are expected due to the energy released in going from a strained cyclic to a "strained free" trigonal-bipyramidal-pentacoordinated intermediate, with one of the cyclic nitrogens occupying the apical position. these compounds react slightly faster (k(H2O) values) but slower regarding the k'(H2O) values than the six membered analogs. The balance in reactivity is attributed to the additional stability obtained in the six membered cyclic compounds by a syn orientation of the two lone pairs of the cyclic nitrogen to the water attack. This stabilization does not exist in the five membered phospholidines since the water attack is perpendicular to the electron pairs of the cyclic nitrogen. In agreement with the incoming water orientation, the product ratios from the hydrolysis show that in the five membered rings the main product is the one produced by endocyclic cleavage; meanwhile, in the six membered cyclic phospholines the kinetic product is the one produced by exocyclic cleavage. The syn orientation of two electron pairs on nitrogen stabilizes the transition state of water approach to the phosphoramides by ca. 3 kcal mol(-1) when compared to the orthogonal attack.     

Electrochemical properties of outer-sphere associates of bipyridyl and sepulchrate metal complexes with (thia)calix[4]arenes

The electrochemical one-electron reduction (oxidation) of bipyridyl metal complexes ([Co(bipy)₃]³⁺, [Cr(bipy)₃]³⁺, [Fe(bipy)₃]²⁺, [Ru(bipy)₃]²⁺ (as well as Co(III) sepulcrate)) with water-soluble (thia)calix[4]arenes has been studied by means of cyclic voltammetry. It has been shown that [M(bipy)₃]^3+/2+ bind to (thia)calix[4]arenes via sulfonate groups of the upper rim. Oxidized forms bind stronger than reduced ones leading to reduction (oxidation) of half-wave cathodic shift. The effect of predominant stabilization of oxidized forms of metal complexes for carboxylated calix[4]arene is stronger than for thiacalix[4]arene (ΔΔG₀?=???7.8?÷???12.5 and ??3.7 kJ/mol, respectively). The redox-switchable outer-sphere binding of Co(III) sepulchrate via lower rim of carboxylated calix[4]arene has been revealed using cyclic voltammetry. The binding constants of outer-sphere associates based on calix[4]arenes and unstable metal complexes ([Co(sep)]²⁺, [Ru(bipy)₃]³⁺, [Co(bipy)₃]²⁺) have been calculated for the first time using ¹H NMR titration and cyclic voltammetry data.

Graphical abstract

Open image in new window

     

Sterically constrained 'roofed' 2-thiazolidinones as excellent chiral auxiliaries

The "roofed" chiral 2-thiazolidinones, which are sterically congested and conformational rigid, and which are prepared by the [4+2] cycloaddition of 2-thiazolone to the cyclic dienes, dimethylanthracene and hexamethylcyclopentadiene, followed by optical resolution with (1S,2R)-2-methoxy-1-apocamphanecarbonic acid (MAC acid) are of considerable promise for use as chiral auxiliaries for the alkylation of enolates.     

Transition metal complexes of cyclic and open ozone and thiozone

Cyclic ozone (O3) has not been isolated so far, despite its computed kinetic persistence. Possibilities of "trapping" this molecule (or the valence-isoelectronic cyclic thiozone, S3) in transition metal complexes are investigated in this paper. Candidates were constructed, first using the 18-electron rule as a guide and then optimizing the structures with the DFT-B3LYP method. A variety of structures result: oxo-peroxo species, di-sigma- and pi-bonded open ozone complexes, some eta1 and eta2 cyclic ozone complexes, and a few bona fide eta3 cyclic O3 and S3 complexes. MLn fragments suitable for complex formation would need to contain very strong pi-acceptor ligands. Nitrosyl ligands were chosen to minimize an energy mismatch between the O3 donor orbitals and the MLn acceptor orbitals. On this basis, the existence of the complexes [S3W(NO)3]3+, [O3M(NO)3]3+ (M = Cr, Mo, W, Fe, Ru, Os), and [S3W(NO)2(CO)]2+ containing cyclic O3 and S3 is suggested. In another approach, facing up to the oxidizing power of O3, potential systems were built from late transition metals in high oxidation states, and also d0 early transition metal centers.     

Ferrocenoyl-amino acids: redox response towards di- and trivalent metal ions

The interaction of six ferrocene-amino acid conjugates (Fc-CO-Gly-OH (2a), Fc-CO-Asp-OH (3a), Fc-CO-Glu-OH (4a), 1,1′-Fc(CO-Gly-OH) (2b), 1,1′-Fc(CO-Asp-OH) (3b), and 1,1′-Fc(CO-Glu-OH) (4b)) with Mg²⁺, Ca²⁺, Zn²⁺, La³⁺, and Tb³⁺ was investigated in aqueous solutions using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Addition of metal ions to solutions caused, in some cases, large changes in the half-wave potential, E_1/2. Our electrochemical results show that the Gly systems, 2a and 2b, show a preference for binding Mg²⁺, whereas the Asp and Glu conjugates prefer binding Ln³⁺.     

Synthesis and tunable ion-recognition properties of novel macrocyclic triamides

In this work, we report synthesis of rigid macrocyclic triamides and their tunable ion-recognition properties as selective anion and metal receptors. Diphenylacetylene-containing cyclic triamide CTA-1b and three cyclic triamides bearing functional methoxy and pyrimidine moieties were prepared by Lithium Hexamethyldisilazide (LiHMDS)-assisted cyclocondesation. CTA-1b displayed strong binding affinity to Cl^– and I^– anions, while CTA-2b exhibited a good binding affinity to the La³⁺ and Eu³⁺ cations. The selective recognition ability of ions has been tuned by incorporating pyrimidine and methoxy groups into the macrocyclic amides.     

Tetra- and hexaatomic cyclic clusters of main-group elements (XY)2 and (XY)3: an ab initio and density functional study

The electronic and molecular structure of planar (cyclic and linear) tetra- and hexaatomic clusters (XY) _n (XY = CC, BN, BeO, LiF; n = 2, 3) was studied using the ab initio CCD(full)/6-311+G** method and density functional approach (B3LYP/6-311+G**). The stability of cyclic clusters C₆, B₃N₃, and Be₃O₃ with D_3h symmetry is mainly determined by the aromaticity of their -electron systems.     

Design and synthesis of 4″,6″-unsaturated cyclic ADP-carbocyclic-ribose, a Ca-mobilizing agent selectively active in T cells

We previously developed cyclic ADP-carbocyclic-ribose (cADPcR, 3a) as a stable mimic of cyclic ADP-ribose (cADPR, 1), a Ca²⁺-mobilizing second messenger. The unsaturated carbocyclic-ribose analogs of cADPR, i.e., 4″,6″-didehydro-cADPcR (8a) and its inosine congener 4″,6″-didehydro-cIDPcR (8b) were newly designed and successfully synthesized using the key intramolecular condensation reaction with S-phenyl phosphorothioate-type substrates. The Ca²⁺-mobilizing potency of the compounds was examined in sea urchin egg homogenates, NG108-15 neuronal cells, and permeabilized Jurkat T-lymphocytes, which may indicate that 4″,6″-didehydro-cADPcR is the first cADPR analog selectively active in T cells. Acid-base behavior and conformation of 8a were also investigated and compared with those of cADPcR.     

Derivatization of protonated peptides via gas phase ion—molecule reactions with acetone

The protonated [M + H]+ ions of glycine, simple glycine containing peptides, and other simple di- and tripeptides react with acetone in the gas phase to yield [M + H + (CH3)2CO]+ adduct ion, some of which fragment via water loss to give [M + H + (CH3)2CO - H2O]+ Schiff's base adducts. Formation of the [M + H + (CH3)2CO]+ adduct ions is dependent on the difference in proton affinities between the peptide M and acetone, while formation of the [M + H + (CH3)2CO - H2O]+ Schiff's base adducts is dependent on the ability of the peptide to act as an intramolecular proton "shuttle." The structure and mechanisms for the formation of these Schiff's base adducts have been examined via the use of collision-induced dissociation tandem mass spectrometry (CID MS/MS), isotopic labeling [using (CD3)2CO] and by comparison with the reactions of Schiff's base adducts formed in solution. CID MS/MS of these adducts yield primarily N-terminally directed a- and b-type "sequence" ions. Potential structures of the b1 ion, not usually observed in the product ion spectra of protonated peptide ions, were examined using ab initio calculations. A cyclic 5 membered pyrrolinone, formed by a neighboring group participation reaction from an enamine precursor, was predicted to be the primary product.     

Comparison of the Complexation of Open-Chain and Cyclic N2S2 Ligands with Cu+ and Cu2+

The complexation properties of the open-chain N₂S₂ ligands 1–4 are described and compared to those of analogous N₂S₂ macrocycles 5–7 . With Cu²⁺, the open-chain ligands give complexes with the stoichiometry CuL²⁺ and CuLOH⁺, the stabilities and absorption spectra of which have been determined. The ligand field exerted by these ligands is relatively constant and independent of the length of the chain. With Cu⁺, the species CuLH, CuLH²⁺, and CuL⁺ were identified and their stabilities measured. The redox potentials calculated from the equilibrium constants and measured by cyclic voltammetry agree and lie between 250 and 280 mV against SHE. The comparison between open-chain and cyclic ligands shows that (1) a macrocyclic effect is found for Cu²⁺ but not for Cu⁺, (2) the ligand-field strength is very different for the two types of ligands, and (3) the redox potentials span a larger interval for the macrocyclic than for the open-chain complexes.     

Novel phosphonated bicyclic frameworks from Diels-Alder reaction as chelating agents of di- and trivalent metal cations

The synthesis of novel [4+2] cycloadducts by Diels-Alder (DA) reaction between diethyl 1-phosphono-1,3-butadiene and cyclic CC and NN dienophiles, such as maleimide and 1,2,4-triazole-3,5-dione derivatives, is described. These phosphonated bicyclic frameworks feature a cage shape enabling metal chelation. Indeed, stable complexes were formed in solution with M²⁺ and M³⁺ metal cations, as evidenced by HRMS in the ESI mode (electrospray ionization). L₁:M (one ligand-one metal) and L₂:M (two ligands-one metal) complexes were identified depending on the nature of the cation.