Enhanced diradical nature in oxyallyl derivatives leads to near infra red absorption: a comparative study of the squaraine and croconate dyes using computational techniques

We apply many criteria to estimate the diradical character of the ground state singlets of several oxyallyl derivatives. This is carried out as the oxyallyl derivatives like squaraine and croconate dyes can be represented by both mesoionic and diradical formulas, the domination of which would characterize its lowest energy transition. One criterion applied is the singlet-triplet gap, which is known to be inversely proportional to the diradical character. Another criterion is the occupation number; this is determined for the symmetry broken state of the molecules in the unrestricted formalism, and the difference of occupation in the HOMO and LUMO is related to the diradical character. The diradical character of all of the croconates and few squaraines is estimated to be large. All of these have absorption above 750 nm and can be classified as near infrared (NIR) dyes, leading to the inference that NIR absorptions in these molecules are largely due to the dominance of the diradical character. To understand the reliability of the DFT methods for the absorption property predictions of these molecules, TD-DFT studies to calculate the vertical excitation energies have been carried out, using the B3LYP/ BLYP exchange correlation functionals and the LB94 asymptotic functional with and without the inclusion of solvent. The deviations, in both the squaraine series (average lower diradical character), are found to be systematic, and with the inclusion of the solvent in the calculation, the deviations decrease. The best least-squares fit with the experimentally observed values using B3LYP /6-311G(d, p) for the symmetric squaraines yields an R value of 0.92 and, for the unsymmetric squaraines, an R value of 0.936. With inclusion of the solvent, the R value is 0.96 for the symmetric squaraines and 0.961 for the unsymmetric squaraines, indicating that these DFT functionals with linear scaling may be used to study these systems. The croconate dyes, however, have larger deviation from the experimentally observed values in all of the functionals studied even after inclusion of the solvent effects. The deviations are also not systematic. The deviation with respect to the experiment in this case is attributed to the average larger diradical character in this series.     

Petroleum resins adsorption onto quartz sand: near infrared (NIR) spectroscopy study

In this paper we have tried to evaluate adsorption parameters of petroleum resins. Near infrared (NIR) spectroscopy is applied for resins bulk concentration evaluation during adsorption process. NIR experimental scheme and parameters are provided. NIR spectra range of 9000-13,000 cm(-1) is chosen. Quartz sand (0.2-0.8 mm fraction) is used as adsorbent; benzene is used as solvent. Different approaches of "NIR spectra-resins concentration" calibration model building are discussed. Partial least squares (PLS) regression method is used. Langmuir model is chosen for experimental data fitting. Combined usage of kinetic and isothermic data gives us ability to evaluate the maximal adsorbed mass density, the equilibrium constant of adsorption, and the rate constants of adsorption (and desorption). The rate constants of resins adsorption and desorption are found to be concentration independent.     

The use of near infrared (NIR) spectroscopy to study specific interactions in polymer blends

The purpose of this brief communication is to demonstrate how near infrared (NIR) spectroscopy can be used to study specific interactions is miscible polymer blends. We will first demonstrate, using model systems and blends of polycaprolactone (PCL) and phenoxy [poly(hydroxypropylether of bisphenol-A)], that information obtained from the OH stretch overtone absorption in the NIR is consistent with the information obtained from the OH stretch fundamental in the mid-IR region. We will then illustrate the advantages of NIR analysis of specific interaction with spectra obtained, over a range of temperatures, from thick (2 mm) films of blends of Nylon-6 and the zinc salt of sulfonated polystyrene (ZnSPS). © 1994 John Wiley & Sons, Inc.     

Building the quality into pellet manufacturing environment--feasibility study and validation of an in-line quantitative near infrared (NIR) method

The present study focuses on the implementation of an in-line quantitative near infrared (NIR) spectroscopic method for determining the active content of pharmaceutical pellets. The first aim was to non-invasively interface a dispersive NIR spectrometer with four realistic particle streams existing in the pellets manufacturing environment. Regardless of the particle stream characteristics investigated, NIR together with Principal Component Analysis (PCA) was able to classify the samples according to their active content. Further, one of these particle stream interfaces was non-invasively investigated with a FT-NIR spectrometer. A predictive model based on Partial Least Squares (PLS) regression was able to determine the active content of pharmaceutical pellets. The NIR method was finally validated with an external validation set for an API concentration range from 80 to 120% of the targeted active content. The prediction error of 0.9% (root mean standard error of prediction, RMSEP) was low, indicating the accuracy of the NIR method. The accuracy profile on the validation results, an innovative approach based on tolerance intervals, demonstrated the actual and future performance of the in-line NIR method. Accordingly, the present approach paves the way for real-time release-based quality system.     

Maize kernel hardness classification by near infrared (NIR) hyperspectral imaging and multivariate data analysis

The use of near infrared (NIR) hyperspectral imaging and hyperspectral image analysis for distinguishing between hard, intermediate and soft maize kernels from inbred lines was evaluated. NIR hyperspectral images of two sets (12 and 24 kernels) of whole maize kernels were acquired using a Spectral Dimensions MatrixNIR camera with a spectral range of 960-1662 nm and a sisuChema SWIR (short wave infrared) hyperspectral pushbroom imaging system with a spectral range of 1000-2498 nm. Exploratory principal component analysis (PCA) was used on absorbance images to remove background, bad pixels and shading. On the cleaned images, PCA could be used effectively to find histological classes including glassy (hard) and floury (soft) endosperm. PCA illustrated a distinct difference between glassy and floury endosperm along principal component (PC) three on the MatrixNIR and PC two on the sisuChema with two distinguishable clusters. Subsequently partial least squares discriminant analysis (PLS-DA) was applied to build a classification model. The PLS-DA model from the MatrixNIR image (12 kernels) resulted in root mean square error of prediction (RMSEP) value of 0.18. This was repeated on the MatrixNIR image of the 24 kernels which resulted in RMSEP of 0.18. The sisuChema image yielded RMSEP value of 0.29. The reproducible results obtained with the different data sets indicate that the method proposed in this paper has a real potential for future classification uses.     

Multiplexing fibre optic near infrared (NIR) spectroscopy as an emerging technology to monitor industrial bioprocesses

The application of near infrared spectroscopy in bioprocessing has been limited by its dependence on calibrations derived from single bioreactor at a given time. Here, we propose a multiplexed calibration technique which allows calibrations to be built from multiple bioreactors run in parallel. This gives the flexibility to monitor multiple vessels and facilitates calibration model transfer between bioreactors. Models have been developed for the two key analytes: glucose and lactate using Chinese hamster ovary (CHO) cell lines and using analyte specific information obtained from the feasibility studies. We observe slight model degradation for the multiplexed models in comparison to the conventional (single probe) models, decrease in r² values from 89.4% to 88% for glucose whereas for lactate from 92% to 91.8% and a simultaneous increase in the number of factors as the model incorporates the inter-probe variability, nevertheless the models were fit for purpose. The results of this particular application of implementing multiplexed-NIRS to monitor multiple bioreactor vessels are very encouraging, as successful models have been built on-line and validated externally, which proffers the prospect of reducing timelines in monitoring the vessels considerably, and in turn, providing improved control.     

Time-resolved infrared absorption study of cyclopentadienyl manganese tricarbonyl derivatives: Chelation of pendant sulfides in acetonitrile

The chelation dynamics of [Mn{eta5-C5H4C(O)R}(CO)3] complexes 1 (R = CH2(SCH3)), 2 (R = CH(SCH3)2), and 3 (R = C(SCH3)3) in room-temperature acetonitrile solution have been investigated on the picosecond time scale by UV-pump IR-probe transient absorption spectroscopy. Similar to the previously observed behavior in n-heptane solution, irradiation of 3 in acetonitrile at 289 nm induces CO loss to exclusively yield a Mn-S chelated dicarbonyl product. Unlike the behavior of 1 and 2 in n-hexane and n-heptane solutions, UV excitation of either 1 or 2 in acetonitrile solution induces CO loss to also exclusively yield the chelated products, with no evidence of a competing solvation pathway. All three complexes exhibit ultrafast chelation in <13 ps. Faster vibrational cooling in acetonitrile vs alkane solutions suggests stronger solute-solvent interaction, perhaps via hydrogen bonding. Ring-opening resulting from continuous irradiation of the pendant sulfide's chelates, [Mn{eta5-C5H4C(O)CH(SCH3)2-kappaS}(CO)2] (4) and [Mn{eta5-C5H4C(O)C(SCH3)3-kappaS}(CO)2] (5), is also discussed.     

A computational study of the cooperativity in clusters of interhalogen derivatives

The clusters, up to four monomers, of the interhalogen derivatives (FCl, FBr, and ClBr) have been studied by means of ab initio and DFT methods, up to MP2/aug-cc-pVTZ computational methods. Two dispositions, linear and cyclic, of the clusters have been studied. Cooperative effects in the geometry, energy, and electron density have been observed in the linear and cyclic dispositions of these clusters. The Natural Energy Decomposition Analysis shows that the main source of the interaction corresponds to the polarization term. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The Pt2 (1,0) band of System VI in the near infrared by intracavity laser absorption spectroscopy

Intracavity laser absorption spectroscopy has been used to record rotationally resolved electronic spectra of Pt(2) in the near infrared. The metal dimers were created using a 50 mm-long, platinum-lined hollow cathode plasma discharge. The observed transition at 12?937 cm(-1) is identified as the (1,0) band of System VI, with state symmetries Ω = 0 - X Ω = 0.     

Application of near infrared spectroscopy (NIR), X-ray fluorescence (XRF) and chemometrics to the differentiation of marmora samples from the Mediterranean basin

Abstract

Near-infrared (NIR) and X-ray fluorescence spectra were recorded for 15 different samples of marmora, from the Mediterranean Basin and of different colours. After appropriate pretreatment (SNV transform + second derivative), the results were subjected to principal component analysis (PCA) treatment with a view to differentiating them. The observed differences among the samples were chemically interpreted by highlighting the NIR wavelengths and minerals, respectively, contributing the most to the PCA models. Moreover, a mid-level data fusion protocol allowed integrating the information from the different techniques and, in particular, to correctly identify (based on the distance in the score space) three test samples of known type. Moreover, it should be stressed that positive results on the differentiation and identification of marmora were obtained using two completely non-invasive, non-destructive and relatively inexpensive techniques, which can also be used in situ.     

A TD-DFT study of the absorption spectra of fast dye salts

The UV/visible spectra of a series of diazonium fast dyes have been evaluated by using a time-dependent density functional theory approach explicitly taking into account bulk solvation effects. Using the PBE0 functional with the 6-311G(2d,2p) atomic basis set, the agreement between theory and experiment is excellent for these cationic species. The effects on the spectra of chemical substitution are analysed.     

双硫脲银配合物(Cl^-)红外光谱及热分解机理的研究

用红外光谱,差热分析、热重量分析研究了AgCl.2CS(NH2)2络合物的热分解,提出络合物的热分解机理,它包括在温度210-230℃的范围内硫脲基转变为NH4NCS同分异构体.计算了热分解反应的表观活化能和指前因子.     

Cyclization tendencies in the free radical polymerization of allyl acrylate derivatives: A computational study

In this study density functional theory (DFT) has been used to model the elementary steps and rationalize the free radical polymerization kinetics in allyl methacrylate (AMA), allyl 2‐cyanoacrylate (ACA) and methyl α‐[(allyloxy)methyl]acrylate. The models used in this study have revealed the fact that while methyl α‐[(allyloxy)methyl]acrylate, cyclopolymerizes via 5‐membered rings, AMA and ACA do not. The cyclization tendency of methyl α‐[(allyloxy)methyl]acrylate is attributed to the similar hybridization (sp³) of C3 and C5 favoring a quasi cyclic structure for the reactive rotamer. On the other hand, the presence of the cyano (CN) group in ACA facilitates the initiation step as compared to AMA. The chain transfer reaction does not seem to play a major role in the monomers of interest. This study highlights the usage of quantum chemistry in determining the cyclization tendencies of allyl acrylate derivatives in their free radical polymerization reactions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Near infrared (NIR) spectroscopy for in-line monitoring of polymer extrusion processes

In recent years, near infrared (NIR) spectroscopy has become an analytical tool frequently used in many chemical production processes. In particular, on-line measurements are of interest to increase process stability and to document constant product quality. Application to polymer processing e.g. polymer extrusion, could even increase product quality. Interesting parameters are composition of the processed polymer, moisture, or reaction status in reactive extrusion. For this issue a transmission sensor was developed for application of NIR spectroscopy to extrusion processes. This sensor includes fibre optic probes and a measuring cell to be adapted to various extruders for in-line measurements. In contrast to infrared sensors, it only uses optical quartz components. Extrusion processes at temperatures up to 300 degrees C and pressures up to 37 MPa have been investigated. Application of multivariate data analysis (e.g. partial least squares, PLS) demonstrated the performance of the system with respect to process monitoring: in the case of polymer blending, deviations between predicted and actual polymer composition were quite low (in the range of +/-0.25%). So the complete system is suitable for harsh industrial environments and could lead to improved polymer extrusion processes.     

Spectrophotometric determination of trace water in organic solvents with a near infrared absorbing dye

A spectrophotometric method for the determination of trace water in organic solvents using a near infrared absorbing dye has been developed. This method is based on the effect that a minor change in polarity of the solvent caused by trace water content determines the extent of aggregation of a near-infrared dye monomer. This change can be detected spectrophotometrically. The calibration curves for methanol, ethanol, and isopropanol were determined. This method has the highest sensitivity (em = 16.73 unit) for water in isopropanol and the lowest sensitivity (em = 2.806 unit) for water in methanol. The correlation coefficient (R)(2) values for the regression lines ranges from 0.990-0.998. The linear range of the method for ethanol is 0.001-0.5%, for isopropanol is 0.001-0.1%, and for methanol is 0.001-1.0%. The limit of detection for ethanol, isopropanol, and methanol are 0.0001, 0.0001, and 0.005% water, respectively. The developed method is sensitive, simple and easy to operate, and the cost of analysis is low.     

Effect of density on the induced near infrared absorption spectrum of solid parahydrogen

The evolution of the induced near infrared absorption spectrum of solid parahydrogen as a function of pressure, at 4.2 K and up to 10 kbar, is given here. A blue frequency shift and a strong intensity enhancement are observed, which depend upon the nature of the line. The continuous presence of an S₁(0) line shows that molecules are not situated at centers of inversion symmetry, and it appears that the crystalline structure remains hexagonal close-packed (hep) in the compressed solid.     

New photochromic symmetrical and unsymmetrical bis(heteroaryl)maleimides: A spectrokinetic study

The photochromic behavior of two newly synthesized diarylethenes is here presented. The compounds studied are the symmetrical (1-benzyl-3,4-bis(2-methylbenzo[b]thiophen-3-yl)-[1H]-2,5-dihydropyrrol-2,5-dione) and the unsymmetrical (1-benzyl-3-(2-methylbenzo[b]thiophen-3-yl)-4-(2,5-dimethyl-3-thienyl)-[1H]-2,5-dihydropyrrol-2,5-dione). Upon stimulation with UV or violet light, these compounds become red-colored due to photocyclization and cyclorevert to the light yellow open form upon irradiation with visible light. In this work, absorption and fluorescence spectra, molar absorption coefficients of the ethenic and cyclized forms, fluorescence quantum yields and photochemical quantum yields of both the forward and back photoreactions were determined. Temperature, excitation wavelength and solvent effects were explored. The symmetrical compound was found to be a bistable photochrome. In contrast, the unsymmetrical molecule resulted unsuitable as photochrome because of side degradation processes occurring in competition with cyclization.     

Ultraviolet absorption spectra of substituted phenols: a computational study

Vertical excitation energies for electronic transitions from the ground state to the first two excited states of phenol, mono- and disubstituted methoxyphenols and methyl-substituted phenols have been characterized with the Time-Dependent Density Functional Theory (TD-DFT), the Complete Active Space Self-Consistent Field method (CASSCF) and the Coupled Cluster with Single and Double Excitations Equation-of-Motion approach (CCSD-EOM) to simulate and interpret experimental ultraviolet absorption spectra. While CASSCF excitation energies for the first two transitions either are grossly overestimated or exhibit a weak correlation with experimental data, both TD-DFT and CCSD-EOM perform very well, reproducing the spectral shifts of both the primary band and secondary band observed upon substitution. The conformational dependence of the calculated excitation energies is generally smaller than the shifts caused by substitution.     

On the synthesis of α-di-(methylmercapto)-methylene derivatives of symmetrical ketones

The generation of synthetic intermediates α-di-(methylmercapto)-methylene ketones 1 has been optimized. Selection of the best base/solvent system for quantitative formation of 1 is justified.