A cyclodextrin-insulated anthracene rotaxane with enhanced fluorescence and photostability

A beta-cyclodextrin anthracene rotaxane was synthesized and found to be significantly more resistant to fluorescence quenching and photobleaching than the uninsulated anthracene derivative.     

Sulfate‐Selective Binding and Sensing of a Fluorescent [3]Rotaxane Host System

The chloride‐templated synthesis of a novel [3]rotaxane, capable of binding anionic guests, and incorporating a naphthalene group for fluorescence sensing is reported. Extensive ¹H NMR titration studies were used to probe the anion binding selectivity of the system. The rotaxane selectively recognises sulfate, undergoing an induced conformational change upon sulfate binding to form a 1:1 stoichiometric sandwich‐type complex, concomitant with significant quenching of the fluorescence. Binding of mono‐anionic guests results in the formation of a 2:1 stoichiometric guest–host complex, and a modest enhancement of the emission. Addition of an excess of sulfate in non‐competitive solvent also results in a 2:1 emissive complex.     

A Doubly Alkynylpyrene‐Threaded [4]Rotaxane That Exhibits Strong Circularly Polarized Luminescence from the Spatially Restricted Excimer

The Sonogashira coupling of γ‐CD‐encapsulated alkynylpyrenes with terphenyl‐type stopper molecules gave a doubly alkynylpyrene‐threaded [4]rotaxane. The rotaxane showed only excimer emission, with a high fluorescence quantum yield of Φ_f=0.37, arising from the spatially restricted excimer within the cavity of the γ‐CD. The excimer emission suffered little from self‐quenching up to a concentration of 1.5×10^?5 M and was circularly polarized with a high g_lum value of ?1.5×10^?2. The strong circularly polarized luminescence may result from the two stacked pyrenes existing in the rotaxane in an asymmetrically twisted manner.     

An acid-base responsive linear-cyclic polymer rotaxane molecular shuttle with fluorescence signal output

The preparation of intelligent-responsive materials with controllable topology structure has long been a significant objective for chemists in the field of materials science. In this paper, we designed and prepared a linear-cyclic reversible topological structure polymer based on the bistable [1]rotaxane molecular shuttle. A ferrocene-functionalized [1]rotaxane and naphthalimide fluorophore group are introduced into the both ends of the polymer, which exhibit distance-induced photo-electron tran...     

Vinylbipyridinium dication-triphenylureidocalix[6]arene pseudorotaxane

A novel pseudo[2]rotaxane 3⊂1 was constructed and confirmed by ¹H NMR, UV-Vis absorption, and luminescence spectra. The association and fluorescence quenching abilities of the new complexes are limited because of their relatively weaker interactions than 2⊂1. Based on such a stable pseudorotaxane, a novel rotaxane employing 1-naphthoyl chloride as the stopper is also prepared.     

含三苯胺单元的超支化共轭聚合物的合成、表征及应用

本实验采用Wittig方法制得了未封端和封端的超支化聚三苯胺-对苯乙烯撑型聚合物,对两种共轭聚合物进行了表征和性能测试.聚合物溶液和固体膜在紫外光照射下均发出较强的绿光.首次对这类聚合物在硝基芳烃化合物荧光猝灭能力进行了初步研究,结果表明:与未封端产物相比,封端后的超支化共轭聚合物在邻硝基甲苯(o-NT)的荧光猝灭效率上有明显提高,当o-NT浓度为21.5×10^-3mol/L时,荧光猝灭效率达到97%.这类共轭聚合物不仅合成操作较为简便,猝灭效率也较高,是一种很有潜力的硝基芳烃化合物荧光检测材料.     

具有不同长度间隔基的含联苯基团的侧链液晶聚炔的荧光行为(英文)

对一系列具有不同长度间隔基的含联苯基团的侧链液晶聚炔的稳态荧光和荧光衰减行为进行了研究.为便于比较,选取其中一个单体作为模型化合物.稳态荧光光谱结果表明,聚合物和单体均显示一个荧光发射,该荧光发射来源于聚合物侧链的联苯基团.随着间隔基长度的减小,聚合物的荧光强度降低.荧光衰减结果表明单体的荧光衰减可以拟合为一个单指数衰减,而聚合物的荧光衰减拟合为三指数衰减.这种三指数衰减可能由溶液局部高浓度引起的猝灭和侧链联苯基团的旋转受阻所引起.溶剂效应表明,溶剂与联苯基团之间的相互作用随溶剂极性增加而增大.     

An Interwoven Metal‐Organic Framework Combining Mechanically Interlocked Linkers and Interpenetrated Networks

New dibenzo[24]crown‐8 ether derivatives were prepared that contain appendages with thioether donors that can coordinate to a metal ion. These macrocycles were then combined with 1,2‐bis(pyridinium) ethane axles to create two types of [2]rotaxane ligands; those with the four thioether donors on the crown ether and those with six donor groups, four from the crown ether and two more attached to the stoppering groups of the dumbbell. The crown ethers and both types of [2]rotaxane ligands were allowed to react with Ag^I ions to form metal‐organic rotaxane framework (MORF) style coordination polymers. The interlocked hexadentate ligand forms the first example of a new type of lattice containing interwoven frameworks resulting from both interpenetration of frameworks due to the presence of an interlocked ligand and more classical interpenetration of independent frameworks.     

Solvent effect on thermal degradation of plasticized para-substituted polystyrenes

The thermal effect on stability of a series of para-substituted polystyrenes with methyl, methoxy and α-methyl substituents in various solvents was studied in the temperature range of 298-363 K. They gave a monomer fluorescence as a minor part and excimer fluorescence as a major part. Thermal heating of para-substituted polystyrenes shows a decrease in both monomer and excimer fluorescences in all used solvents. Thermal heating causes a small fluorescence quenching effect at lower temperatures in solution but becomes very dominant at higher temperatures. Added terephthalate and phthalate plasticizers to these para-substituted polystyrenes caused a quenching of both monomer and excimer fluorescences without the formation of exciplex emission. The thermal quenching processes of the plasticized polymers were accompanied by a change in the structure of the fluorescence spectra at high heating temperatures. This may indicate that thermodestruction of these polymers starts from a random chain scission. The change in solvent polarity has considerable effect on fluorescence quenching but it has a minor effect on the thermal degradation of these polymers. The binding energies for excimer formation were calculated in the used solvents.     

Hindered fluorescence quenching in an insulated molecular wire

A [3]rotaxane 2 within 1(2) consisting of an anionic phenylene ethynylene dumbbell 2(4-) threaded through two cationic cyclophanes 1(2+) has been prepared using aqueous Glaser coupling. Stern-Volmer analysis of the fluorescence quenching using three different electron-acceptors (methyl viologen 13(2+), dipropyl-4,4'-bipyridinium disulfonate 14 and anthraquinone-2,6-disulfonate 15(2-)) shows that the threaded cyclophanes inhibit electron-transfer from the excited state of the dumbbell by steric shielding, and by electrostatic shielding in the case of methyl viologen.     

Siloxanes with pendent naphthalene diimides: synthesis and fluorescence quenching

Cyclic siloxanes with pendent naphthalene diimide groups were synthesized via hydrosilylation to form amorphous electron-accepting compounds. Photophysical measurements and >99.9% fluorescence quenching of well-known p-type polymers by the siloxanes demonstrate that these siloxanes form a new class of highly efficient n-type materials that provide some control over intermolecular interactions.     

Influence of aggregates and solvent aromaticity on the emission of conjugated polymers

The influence of aggregates and solvent aromaticity on the photophysics and fluorescence dynamics of two conjugated polymers is studied. The two polymers are derivatives of poly(p-phenylene vinylene) (PPV) containing different kinked moieties along the main chain. The polymers contain 2,6-diphenylpyridine and m-terphenyl kinked moieties and they are abbreviated as PN and PC, respectively. The insertion of kinked segments along the main chain shifts the emission spectrum from the yellow-orange spectral region, common to PPV derivatives, to the blue-green spectral region. The results show that in dilute solutions the polymers decay monoexponentially, while in concentrated ones the fluorescence decays biexponentially, indicating fluorescence quenching. This is attributed to an energy transfer process from polymer chains to aggregates that occurs within a few tens of picoseconds. By comparing the photophysics and fluorescence dynamics of polymer PN in a nonaromatic and an aromatic solvent, we conclude that the polymer conformation adopted in the aromatic solvent leads to a higher fluorescence quantum yield and a longer fluorescence lifetime. Furthermore, the fluorescence quenching of PN because of aggregates is faster and more efficient in the aromatic than in the nonaromatic solvent. These results can be explained through a more extended chain conformation of PN in the aromatic solvent.     

Mechanically interlocked mechanophores by living-radical polymerization from rotaxane initiators

Two [2]rotaxane initiators for single-electron-transfer living-radical-polymerization were synthesized and used for the controlled polymerization of methyl acrylate. The mechanically interlocked polymers exhibited distinct responses to mechanical activation by ultrasound. Monitoring the fate of the rotaxanes' charge transfer absorption bands provides evidence for preferential mechanical degradation of a midsection rotaxane unit as compared to a terminal rotaxane entity as a consequence of mechanical forces accumulating in the central region of the polymer chain.     

Selective sensing of metalloproteins from nonselective binding using a fluorogenic amphiphilic polymer

Nonconjugated fluorogenic amphiphilic polymers containing an anthracene chromophore exhibit fluorescence quenching in the presence of metalloproteins, although the binding of the polymer to proteins is not selective. The reason for this difference is that the possible conformational changes that protein binding could bring about on a polymer do not affect the fluorescence properties of a pendent chromophore in nonconjugated polymers. This is in contrast to the nonspecific binding and response found with conjugated polymers to proteins.     

Versatile Supramolecular Cross‐Linker: A Rotaxane Cross‐Linker That Directly Endows Vinyl Polymers with Movable Cross‐Links

A supramolecular cross‐linked cross‐linker, capable of introducing rotaxane cross‐links to vinyl polymers, has been developed for the rational synthesis of polyrotaxane networks. The experimental results reveal that the combination of an oligocyclodextrin (OCD) and a terminal bulky group‐tethering macromonomer (TBM) forms a polymer‐network structure having polymerizable moieties through supramolecular cross‐linking. Radical polymerization of a variety of typical vinyl monomers in the presence of the vinylic supramolecular cross‐linker (VSC) afforded the corresponding vinyl polymers cross‐linked through the rotaxane cross‐links (RCP) as transparent stable films in high yields under both photoinitiated and thermal polymerization conditions. A poly(N,N‐dimethylacrylamide)‐based hydrogel synthesized by using VSC, RCP_DMAAm, displayed a unique mechanical property. The small‐angle X‐ray scattering (SAXS) results, indicating patterns characteristic of a polyrotaxane network, clearly suggested the presence and role of the rotaxane cross‐links. The confirmation of the introduction of rotaxane‐cross‐links into vinyl polymers strongly reveals the significant usefulness of VSC.     

A Guiding Principle for Strengthening Crosslinked Polymers: Synthesis and Application of Mobility‐Controlling Rotaxane Crosslinkers

Three component mobility controlling vinylic rotaxane crosslinkers with two radically polymerizable vinyl groups ( RC_R s) were synthesized to prove that the mobility of the components of the RC_R s plays a crucial role in determining the properties of rotaxane‐crosslinked polymers (RCPs). RC_R s (R=H, Me, or Et) were obtained from living ring‐opening polymerization. RCP_Et was prepared using RC_Et , which exhibits the lowest component mobility. The low component mobility is reflected in inferior mechanical strength and stretching ability in tensile stress tests compared to components with good (R=Me) and high (R=H) mobility. However, RCP_Et exhibited significantly higher stress and strain values than the corresponding covalently crosslinked polymers ( CCP_R s). These results indicate that a suitable component mobility substantially enhances the mechanical strength of RCPs. This behavior could serve as a guiding principle for the molecular design of advanced RCs.     

Efficient Intramolecular Energy Transfer between Two Fluorophores in a Bis‐Branched [3]Rotaxane

A bis‐branched [3]rotaxane, with two [2]rotaxane arms separated by an oligo(para‐phenylenevinylene) (OPV) fluorophore, was designed and investigated. Each [2]rotaxane arm employed a difluoroboradiaza‐s‐indacene (BODIPY) dye‐functionalized dibenzo[24]crown‐8 macrocycle interlocked onto a dibenzylammonium in the rod part. The chemical structure of the [3]rotaxane was confirmed and characterized by ¹H and ¹³C NMR spectroscopy and high‐resolution ESI mass spectrometry. The photophysical properties of [3]rotaxane and its reference systems were investigated through UV/Vis absorption, fluorescence, and time‐resolved fluorescence spectroscopy. An efficient energy‐transfer process in [3]rotaxane occurred from the OPV donor to the BODIPY acceptor because of the large overlap between the absorption spectrum of the BODIPY moiety and the emission spectrum of the OPV fluorophore; this shows the important potential of this system for designing functional molecular systems.     

Electrically insulated molecular wires

This paper is an up-to-date mini-review based on literature data and own results regarding synthesis and properties of conducting (pseudo)rotaxane supramolecular structures. Conjugated polymers, such as polyarylene, polyheteroarylene, polyaniline, polyarylenevinylene or polyaryleneimine, were used as axle, while the macrocyclic components were cyclodextrins, cucurbiturils, cyclophanes or crown ethers. Properties of the supramolecular structure such as solubility, thermal or chemical stability, conductivity, etc. can be drastically modified by the inclusion of hydrophobic conjugated polymers inside the macrocycle, without any chemical modification. For instance, the photophysical properties (i.e. quantum yield of fluorescence and electroluminescence) of the supramolecular structures were enhanced when compared with uninsulated conjugated polymers. The doping process is also affected, because the access of a dopant to the conjugated chain is limited only to the uncovered domains of the conjugated chain.     

A [2]rotaxane capped by a cyclodextrin and a guest: formation of supramolecular [2]rotaxane polymer

A [2]rotaxane capped by a beta-cyclodextrin and a 2,4,6-trinitrophenyl group has been prepared by dissolving 6-aminocinnamoyl beta-cyclodextrin in water with 1-adamantane carboxylic acid and complexation with alpha-cyclodextrin followed by the reaction with 2,4,6-trinitrobenzene sulfonic acid sodium salt. The [2]rotaxane has been found to form supramolecular polymers by host-guest interactions.     

Water‐soluble anionic conjugated polymers for metal ion sensing: Effect of interchain aggregation

Three sulfonato‐containing fluorene‐based anionic water‐soluble conjugated polymers, which are specially designed to link fluorene with alternating moieties such as bipyridine ( P1 ), pyridine ( P2 ), and benzene ( P3 ) have been synthesized via the Pd‐catalyzed Sonogashira‐coupling reaction, respectively. These polymers had good solubility in water and showed different responses for transition metal ions with different valence in aqueous environments: the fluorescence of bipyridine‐containing P1 can be completely quenched by addition of all transition metal ions selected and showed a good selectivity for Ni²⁺; the pyridine‐containing P2 had a little response for monovalent and divalent metal ions while showed good quenching with the addition of trivalent metal ions (with a special selectivity for Fe³⁺); P3 had responses only for the trivalent metal ions within the ionic concentration we studied. After investigation of the UV‐vis absorption spectra, PL emission spectra, DLS, and fluorescence lifetime of P1 – P3 in aqueous solution when adding transition metal ions, we found that the different spectrum responses of these polymers are attributed to the different coordination ability of the units linked with fluorene in the main chain. The energy or electron‐transfer reactions were the main reason for fluorescence quenching of P1 and P2 . On the other hand, interchain aggregation caused by trivalent metal ions lead to fluorescence quenching for P3 and also caused partly fluorescence quenching of P1 and P2 . These results revealed the origin of ionochromic effects of these polymers and suggested the potential application for these polymers as novel chemosensors with higher sensing sensitivity in aqueous environments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5057–5067, 2009