共查询到19条相似文献,搜索用时 109 毫秒
1.
在光电效应实验中测量光电管的基本特性 总被引:1,自引:0,他引:1
在光电效应测量普朗克常数实验装置的基础上介绍了测量光电管的光频特性、伏安特性和光照特性的实验方法,给出了相应的实验结果,拓宽了实验内容、增强学生综合实验能力。 相似文献
2.
3.
4.
5.
光电效应实验及理论解释,为量子理论的建立奠定了基础,在光电效应伏安特性实验中,如何有效减少实验影响因素,提高测量结果的精确度,成为光电效应伏安特性实验改进的一个关键点。本从光电效应实验测量的伏安曲线出发,分析理论与实验结果上的差异,提出了影响实验结果的因素以及相应的实验操作办法,为光电效应伏安特性实验的改进,获得更加精确的实验数据以及光电效应实验的应用奠定了基础。 相似文献
6.
7.
为研究电脉冲触发真空沿面闪络开关在中、小通流条件下的适用性,基于直接镀铜基板工艺制作了真空沿面闪络开关样件并搭建了开关工作特性测试实验平台。通过实验手段初步研究了开关耐压特性、触发工作特性(触发延时、抖动、工作范围)和寿命特性。实验结果表明:有效间隙7.2 mm的真空沿面闪络开关直流耐压约40 kV;开关在18 kV工作电压下触发导通延时89.9 ns,抖动13.1 ns,开关在1~18 kV工作电压范围内均能可靠触发导通;连续考核约2300次后开关各项特性无明显变化。 相似文献
8.
9.
10.
11.
随着温度的降低,超导块材表现出的超导特性也随之变化.本文结合现有实际应用的车载超导块材冷却方法,通过改变气压的方式营造过冷液氮温度条件,探究块材组合与Halbach轨道之间的悬浮特性.由于实验测量存在一定局限性,只能完成部分工况条件下的研究.为了更加系统全面的研究,本文对过冷状态下超导块材的悬浮特性进行仿真计算,通过与实验结果对比来确定仿真参数.结果显示,仿真计算与实验数据吻合度较高,为后期的研究工作提供了仿真工具. 相似文献
12.
13.
14.
15.
Dynamic characteristics of resonant gyroscopes study based on the Mathieu equation approximate solution 下载免费PDF全文
Dynamic characteristics of the resonant gyroscope are studied based on the Mathieu equation approximate solution in this paper.The Mathieu equation is used to analyze the parametric resonant characteristics and the approximate output of the resonant gyroscope.The method of small parameter perturbation is used to analyze the approximate solution of the Mathieu equation.The theoretical analysis and the numerical simulations show that the approximate solution of the Mathieu equation is close to the dynamic output characteristics of the resonant gyroscope.The experimental analysis shows that the theoretical curve and the experimental data processing results coincide perfectly,which means that the approximate solution of the Mathieu equation can present the dynamic output characteristic of the resonant gyroscope.The theoretical approach and the experimental results of the Mathieu equation approximate solution are obtained,which provides a reference for the robust design of the resonant gyroscope. 相似文献
16.
17.
18.
19.
针对光电信号转换特性的测量实验仪存在的不足,对仪器的螺杆传动结构、暗箱结构、读数结构及更换器件部分做了创新性设计.该仪器能在正常的环境光照条件下做实验,较准确地读出光电转换器件间的变化距离(精度可达到0.01 mm),更能方便地更换研究的器件. 相似文献