Waveguide Array Wavelength Router Design to Improve Insertion Loss Uniformity

We propose a wavelength router design to improve insertion loss uniformity. Branched waveguides are placed at junctions between the waveguide array and a planar waveguide. The diffracted light injected into planar waveguides is forwarded in different directions. At the image plane of the planar waveguide, a flat top envelope is attained to ensure loss uniformity among output ports.     

Laser-written nanoporous silicon ridge waveguide for highly sensitive optical sensors

We report that low-loss ridge waveguides are directly written on nanoporous silicon layers by using an argon-ion laser at 514 nm up to 100 mW. Optical characterization of the waveguides indicates light propagation loss lower than 0.5 dB/cm at 1550 nm after oxidation. A Mach-Zehnder interferometer sensor is experimentally demonstrated using the waveguide in its sensing branch, and analytical results indicate that very high sensitivity can be achieved. With large internal surface area, versatile surface chemistry, and adjustable index of refraction of porous silicon, the ridge waveguides can be used to configure Mach-Zehnder interferometers, Young's interferometers, and other photonic devices for highly sensitive optical biosensors and chemical sensors as well as other applications.     

Fabrication of fluorinated polyimide optical waveguides by micropen direct writing technology

A novel and cheap direct writing method based on the micropen has been developed to fabricate fluorinated polyimide stripe optical waveguides on Si/SiO₂ wafers. The overall design, starting material, micropen direct writing system and fabrication processes of the stripe optical waveguides are presented. The effects of the key direct writing parameters, such as the tip-to-substrate distance, extrusive gas pressure, writing speed and viscosity of the polyamic acid, on the dimension and morphology of the stripe optical waveguides are discussed in detail. After deposition by the micropen system and baking process, the fluorinated polyimide stripe optical waveguides with good morphology and surface quality can be fabricated using the optimal parameters. The propagation losses at the wavelength of 1.55 μm are in the range of 1.4-3.5 dB cm⁻¹ as characterized by different length combinations of the strip optical waveguides.     

Interference effect in scattering loss of high-index-contrast planar waveguides caused by boundary reflections

We present theoretical and experimental results on an interference effect caused by boundary reflections on the optical scattering loss in high-index-contrast planar waveguides. Analytical expressions for the polarization-dependent scattering loss are derived using a surface Green's function. For high-index-contrast waveguides of submicrometer dimensions a significant deviation from accepted theory arises, including scattering loss suppression owing to a thin-film interference effect. Our theoretical predictions are confirmed by loss measurements on silicon-on-insulator channel waveguides.     

Self-Phase modulation in nonlinear 2-D plasma waveguides

Pulse propagation equation of 2-D nonlinear dispersion plasma waveguides is strictly educed from the wave equation. The nonlinear coefficient is defined, simplified and used to assess and compare the nonlinear characteristic of three popular 2-D plasma waveguides: the metal stripe, the V-groove on a metal surface and the triangular metal wedge. SPM (Self-Phase Modulation) of three 2-D plasma waveguides is predicted and discussed. The results indicate that the propagation distance is enough to observe SPM phenomenon in 2-D plasma waveguides. Both V-groove and Ag stripe are suitable for constructing nonlinear optical devices.     

应用于气体传感器的具有铝/金电极的单模式两端对声表面波谐振器

为改善气体传感器性能,通过器件优化设计获得了一种应用于气体传感器的具有低损耗、高品质因子(Q)的单模式两端对声表面波(SAW)谐振器。该谐振器由两个换能器、分置于换能器两边的短路栅反射器以及在换能器之间分布的用于敏感膜镀膜的约2.5mm金属薄层构成。谐振器采用铝/金双层电极以降低测试气体环境的腐蚀影响。利用经典耦合模(COM)理论对器件性能进行了仿真以提取优化的结构设计参数。基于仿真结果,实验研制了基于300MHz频率的新型铝/金电极SAW两端对谐振器,测试结果显示所研制器件具有较低损耗(〈7dB),较高Q值(-3000)以及单一谐振模式的特点,并且,以所研制的新型谐振器为频率控制单元的谐振器型振荡器表现出良好的频率稳定度(t15Hz/h),这对于改善气体传感器的检测下限及稳定性等性能指标具有重要意义。      

Development of two-port surface acoustic wave resonator with Al/Au electrodes for gas sensing

Simple and efficient surface acoustic wave(SAW)two-port resonators with low insertion loss and high Q-values on ST-X quartz substrate using a corrosion-proof A1/Au-stripe electrode structure are developed for gas sensing.It was composed of two shorted grating reflectors and adjacent intedigital transducers(IDT),and an active metal film in the cavity between the IDTs for the sensitive film coating.The devices are expected to provide good protection towards metal electrode for gas sensors application in chemically reactive environments.Excellent device performance as low insertion loss,high Q factor and single-mode are achieved by carefully selecting the metallic electrode thickness,cavity length and acoustic aperture.Prior to fabrication,the coupling of modes(COM)model was performed for device simulation to determine the optimal design parameters.The fabricated single-mode SAW resonator at operation frequency of 300 MHz range exhibits matched insertion loss of~6.5 dB and loaded Q factor in the 3000 range.Using the fabricated resonator as the feedback element,a dualresonator-oscillator with excellent frequency stability(0.1 ppm)was developed and evaluated experimentally,and it is significant for performance improvement of SAW gas sensor.     

Coupling of single-mode Ti-diffused LiNbO3 waveguides to single-mode fibers

We report on measurements of the near-field intensity distribution of single-mode T-diffused LiNbO₃ waveguides and on the alignment tolerances when coupled to a single mode fiber. Coupling efficiencies of typically 77 to 87% are calculated and a value as high as 80% has been measured experimentally for a y-cut substrate and TM-like polarisation. The total insertion loss of 1 cm long single-mode Ti-diffused waveguides (c-cut) inserted between single-mode fibers was typically 10 dB.     

A concise design of 16 × 16 polymer AWG with low insertion loss and crosstalk

In this paper, a 16-channel arrayed waveguide grating multiplexer (AWG) has been designed using polymer materials with 1.5% refractive index difference. Certain important parameters are optimized using the coupling mode theory and Beam Propagation Method. The factors that affect the insertion loss and the crosstalk are analyzed in this paper. In our design we introduced the parabolic taper structure and evaluated the suitable number of the arrayed waveguide, obtaining a total insertion loss of 2.19 dB. For obtaining a low crosstalk we evaluate the pitches of adjacent input/output waveguides ΔX and arrayed waveguides d as different values. We chose the value of ΔX about 2.5 times of d by enlarging the pitches of adjacent input/output waveguides. The crosstalk of the designed AWG is lower than −40 dB.     

Dielectric waveguide model for guided surface polaritons

Although surface polariton modes supported by finite-width interfaces can guide electromagnetic energy in three dimensions, we demonstrate for the first time to our knowledge that such modes can be modeled by the solutions of two-dimensional dielectric slab waveguides. An approximate model is derived by a ray-optics interpretation that is consistent with previous investigations of the Fresnel relations for surface polariton reflection. This model is compared with modal solutions for metal stripe waveguides obtained by full vectorial magnetic-field finite-difference methods. The field-symmetric modes of such waveguides are shown to be in agreement with the normalized dispersion relationship for analogous TE modes of dielectric slab waveguides. Lateral confinement is investigated by comparison of power-density profiles, and implications for the diffraction limit of guided polariton modes are discussed.     

Adiabatic transfer of surface plasmons in non-Hermitian graphene waveguides

We investigate the energy transfer of surface plasmon polaritons (SPPs) based on adiabatic passage in a non-Hermitian waveguide composed of three coupled graphene sheets. The SPPs can completely transfer between two outer waveguides via the adiabatic dark mode as the waveguides are lossless and the coupling length is long enough. However, the loss of graphene can lead to breakdown of adiabatic transfer schemes. By utilizing the coupled mode theory, we propose three approaches to cancel the nonadiabatic coupling by adding certain gain or loss in respect waveguides. Moreover, the coupling length of waveguide is remarkably decreased. The study may find interesting application in optical switches on a deep-subwavelength scale.     

四种非矩形截面传感波导中的TE波和TM波

用保角变换将非矩形截面传感波导变换成等效矩形截面波导．给出计算等效矩形截面波导的TE模和TM模、电磁场、临界频率、波导壁电流、功率传输和衰减的公式．并给出4种非矩形传感截面波导数值计算的例子．     

PDL free plasma enhanced chemical vapor deposition SiC optical waveguides and devices

Planar silicon carbide (SiC) waveguides are proposed for fabrication on a silicon substrate with an oxide isolation layer. Using post deposition annealing it is possible to achieve low polarisation-dependent loss (PDL) within optical SiC waveguides fabricated using a low temperature deposition technique. The proposed waveguides are optically characterised and successfully used in power splitters and vibration sensors. Results before and after annealing cycles for those devices are discussed. The interesting optical characteristics of SiC waveguides as well as the first passive components presented open the way for photonic sensing in harsh environment where SiC is a very promising material.     

Integration of electro-optic polymer modulators with low-loss fluorinated polymer waveguides

We have demonstrated a hybrid Mach-Zehnder optical modulator consisting of a large-core, low-loss fluorinated passive polymer waveguide and an electro-optic (EO) polymer waveguide. The combination exhibits low fiber coupling loss to the passive waveguide and reduced transmission loss because the EO polymer waveguide is used only in the active region. The two waveguides are connected by vertical tapers that permit low-loss adiabatic coupling between the two modes. The half-wave voltage and the insertion loss of the fabricated modulator are 3.6 V and 6 dB, respectively, at a wavelength of 1.55 microm . The estimated coupling loss with the standard single-mode fiber is ~0.5 dB.     

耦合谐振器光波导旋转传感的相位灵敏度

利用光学谐振器结构的色散可提高旋转传感的灵敏度, 耦合谐振器光波导可实现强色散, 本文利用传输矩阵理论, 研究耦合谐振器光波导旋转传感的相位灵敏度, 讨论谐振器布局和波导参数对相位灵敏度的影响, 结果表明波导的相位曲线和相位灵敏度依赖于波导中谐振器的布局, 谐振器数量和耦合系数不仅会影响波导旋转传感相位灵敏度曲线峰值的数量和带宽, 还会影响相位灵敏度的大小, 而损耗会降低波导的相位灵敏度, 本文的结果可用于利用谐振器布局和波导参数设计耦合谐振器光波导的相位灵敏度, 对其在旋转传感方面的应用有重要意义. 关键词： 谐振器 旋转传感 光波导     

降低AWG插入损耗和串扰设计新方法

在AWG器件的设计中引入了抛物线型的楔形波导结构,根据过渡区理论优化了引入的抛物线型楔形结构的形状和尺寸.采用抛物线型楔形结构代替直线型楔形结构,AWG的插入损耗降低了2 dB左右.在优化参数时使输出/输入波导间距与阵列波导间距取不同的值,并使输出/输入波导间距适当增大,而阵列波导间距取较小值,这样使得串扰降至－30 dB以下且插入损耗保持在低水平.运用光束传播方法给出器件的输出光谱并证实了理论上预想的结果.     

X切H:LiNbO3光波导的工艺仿真研究

对于X切H:LiNbO₃光波导,在532 nm和1310 nm波长下,用棱镜耦合器进行了工艺仿真研究.对于在150℃,180℃和200℃用苯甲酸质子交换的光波导,分别求得交换厚度与交换时间的关系曲线,在此基础上给出质子交换的扩散系数与交换温度的关系曲线.对于在180℃质子交换并在350℃退火的光波导,给出以交换时间(交换厚度）为参变量的表面折射率增量、有效厚度与退火时间的关系曲线.研究结果可供低损耗α相单模波导的设计和制备做参考.     

Total internal reflection-evanescent coupler for fiber-to-waveguide integration of planar optoelectric devices

We present a method for parallel coupling from a single-mode fiber, or fiber ribbon, into a silicon-on-insulator waveguide for integration with silicon optoelectronic circuits. The coupler incorporates the advantages of the vertically tapered waveguides and prism couplers, yet offers the flexibility of planar integration. The coupler can be fabricated by use of either wafer polishing technology or gray-scale photolithography. When optimal coupling is achieved in our experimental setup, the coupler can be packaged by epoxy bonding to form a fiber-waveguide parallel coupler or connector. Two-dimensional electromagnetic calculation predicts a coupling efficiency of 77% (- 1.14-dB insertion loss) for a silicon-to-silicon coupler with a uniform tunnel layer. The coupling efficiency is experimentally achieved to be 46% (-3.4-dB insertion loss), excluding the loss in silicon and the reflections from the input surface and the output facet.     

Simulation and optimization of a polymer directional coupler electro-optic switch with push-pull electrodes

Structural model and design technique are proposed for a polymer directional coupler electro-optic switch with rib waveguides and push-pull electrodes, of which the electric field distribution is analyzed by the conformal transforming method and image method. In order to get the minimum mode loss and the minimum switching voltage, the parameters of the waveguide and electrode are optimized, such as the core with, core thickness, buffer layer between the core and the electrode, coupling gap between the waveguides, electrode thickness, electrode width and electrode gap. Switching Characteristics are analyzed, which include the output power, insertion loss, and crosstalk. To realize normal switching function, the fabrication error, spectrum shift, and coupling loss between a single mode fiber (SMF) and the waveguide are discussed. Simulation results show that the coupling length is 3082 μm, push-pull switching voltage is 2.14 V, insertion loss is less than 1.17 dB, and crosstalk is less than −30 dB for the designed device.     

Low-loss compact-size slotted waveguide polarization rotator and transformer

Two mode-evolution-based low-loss compact-size integrated polarization rotators and transformers are presented. They are designed to fulfill the tasks of rotating mode polarizations between Gaussian-like strip waveguide modes and non-Gaussian-like slotted waveguide modes, as well as the mode transforming between horizontal and vertical slotted waveguides. Consisting of several adiabatic tapers, the presented devices can achieve complete polarization rotations and transformations between different classes of waveguide modes with a device length of tens of micrometers and with a negligible insertion loss.