Infrared spectrum and absorption coefficient of the cofactor flavin in water

Flavins play a key role as redox cofactors of enzymes involved in important metabolic processes. Moreover, they undergo photochemical reactions as chromophores in sensors of blue light or magnetic field in many organisms. The reaction mechanisms of flavoproteins have been investigated by infrared spectroscopy and theoretical studies. However, basic information on flavins in the infrared spectral range has been missing, such as absorption spectra in water and absorption coefficients. Here, the cofactors flavin adenine dinucleotide (FAD) and flavin mononucleotide (FMN) were investigated in aqueous medium by Fourier transform infrared spectroscopy. Transmission and attenuated total reflection (ATR) configuration were employed in direct comparison. Absorption spectra in the range of 920–1800 cm⁻¹ were determined after accurate subtraction of the contributions from the water vibrations. The important carbonyl vibrations were resolved at 1661 and 1712 cm⁻¹. The absorption spectra may serve as a reference for theoretical and experimental studies on the effect of the microenvironment on the flavin cofactor. Furthermore, the molar absorption coefficient of FAD at 1547 cm⁻¹ was determined to 2200 L mol⁻¹ cm⁻¹ with an integral absorption coefficient of ∼50,000 L mol⁻¹ cm⁻². These values are prerequisite for the determination of reaction yields in flavoproteins from reaction-induced difference spectra.     

Structural and thermodynamic analysis of heteroassociation of daunomycin and flavin mononucleotide molecules in water by <Superscript>1</Superscript>H NMR spectroscopy

Heteroassociation of the antitumor antibiotic daunomycin (DAU) with flavin mononucleotide (FMN) has been investigated by one-and two-dimensional ¹H NMR spectroscopy (500 MHz) in a water solution to determine the molecular mechanism of the combined action of the antibiotic and vitamin in the FMN-DAU system. The equilibrium constants of the reactions, induced proton chemical shifts, and thermodynamic parameters (ΔH, ΔS) of heteroassociation were determined from the concentration and temperature dependences of the proton chemical shifts in the interacting aromatic molecules. Analysis of the results indicate that heterocomplexes of riboflavin mononucleotide and daunomycin are formed due to stacking interactions between aromatic chromophores. The most probable spatial structure of the 1:1 DAU-FMN heterocomplex was determined by the molecular dynamics method using the X-PLOR program and the results of the analysis of the induced proton chemical shifts in molecules. Calculation of the relative content of self-and hetero-complexes of daunomycin for different values of the ratio (r) between the concentrations of flavin mononucleotide and daunomycin demonstrated that for r > 3, the contribution of DAU-FMN heterocomplexes to the equilibrium distribution of associates in aqueous solution is dominant. It is concluded that the aromatic molecules of vitamins, in particular, riboflavin, can form energetically strong heteroassociates with antitumor antibiotics in water solution and can thereby affect their medical and biological activity.     

Photo-degradation behaviour of roseoflavin in some aqueous solutions

An absorption and emission spectroscopic characterization of roseoflavin (8-dimethylamino-8-demethyl-riboflavin, RoF) in aqueous solutions was carried out. The studies were concentrated on roseoflavin in pH 8 phosphate buffer. Absorption cross-section spectra, fluorescence excitation spectra, fluorescence quantum distributions, fluorescence quantum yields and fluorescence lifetimes were determined. The fluorescence of RoF is quenched by photo-induced intra-molecular charge-transfer at room temperature. The photo-degradation of RoF in un-buffered water, in Tris–HCl buffer, and in phosphate buffer was studied. Phosphate buffer and to a smaller extent Tris buffer catalyse the RoF photo-degradation. Photo-excitation of the primary photoproduct, 8-methylamino-riboflavin (8-MNH-RF), enhanced the RoF degradation by triplet 8-MNH-RF – singlet RoF excitation transfer with subsequent triplet-state RoF degradation.     

Vacuum-UV-photolysis of aqueous solutions of citric and gallic acids

The vacuum-UV- (VUV-) photolysis of water is one of the advanced oxidation processes (AOP) based on the production of hydroxyl radicals (HO) that can be applied to the degradation of organic pollutants in aqueous systems. The kinetics of the VUV-photolyses of aqueous solutions of citric acid (1) or gallic acid (2) were investigated in the presence or absence of dissolved molecular oxygen (O₂) and under different pH conditions. In the case of 1, the rate of consumption of the substrate was faster at pH 3.4 than in alkaline solution (pH 11), whereas, in the case of 2, the variation of pH (2.5–7.5) did not affect the course of the reaction. Unexpectedly, the rates of depletion of both 1 and 2 decreased in the absence of O₂, this effect being much more pronounced in the case of 2. In order to explain these results, possible reaction pathways for the degradation of 1 and 2 are proposed, and the roles of the oxidizing (HO) and reducing (H and e_aq⁻) species produced by the VUV-photolysis of water are discussed.     

Electrical conductivity of aqueous polymer solutions

 Theoretical equations were proposed to adequately simulate the electrical conductivity behavior of aqueous solutions of both charged and uncharged polymers. The theory, based on the mixture equation of Boned and Peyrelasse, was experimentally verified on poly(acrylic acid) (PAA) in water and poly(ethylene oxide) (PEO) in aqueous electrolyte solutions. The data analysis suggested that both the polymer coils may be depicted as oblate ellipsoids. Subsequently, the semiaxes values of the polymer coils were determined, and they were in good agreement with the results reported in the literature. Received: 25 June 1996 Accepted: 2 October 1996     

Synthesis of polymers in aqueous solutions: Esterification reaction of poly(methacrylic acid) with alkyl halides using DBU in aqueous solutions

A convenient esterification reaction of poly(methacrylic acid) (PMAA) with certain alkyl halides was performed using 1,8-diazabicyclo-[5.4.0]-7-undecene (DBU) as a base in aqueous solution or in water. The esterification reaction of PMAA with propargyl bromide (PB) proceeded very smoothly and quantitatively at 30°C to give corresponding poly(propargyl methacrylate), although the rate of the reaction decreased with increasing water. The reaction of PMAA with benzyl bromide, o-nitrobenzyl bromide, and p-nitrobenzyl bromide gave corresponding poly(methacrylic ester) using DBU under suitable reaction conditions in water. The esterification reactions of PMAA with PB were carried out using certain organic bases such as triethylamine, 4(N,N-dimethylamino)pyridine and pyridine. Inorganic bases such as sodium carbonate, sodium hydroxide, potassium carbonate, and potassium hydroxide were also tried under the same conditions as with DBU. However, the degrees of estrification with all these bases was much lower than that with DBU. © 1996 John Wiley & Sons, Inc.     

Decomposition of poly(4‐hydroxystyrene sulfone) in alkaline aqueous solutions

It was confirmed by ¹H NMR measurements that poly(4‐hydroxystyrene sulfone) (PHOSS) was decomposed in dissolving in a deuterium oxide solution of sodium deuteroxide to give trans‐2‐(4‐hydroxyphenyl)ethenesulfinic acid (HESA) and 4‐hydroxystyrene (HOSt) quantitatively. HESA and HOSt were formed in the mole ratio of about 2:3. The amount of each product was almost independent of the alkaline concentration ranging from 1 to 12 w/v %. The mole ratio of monomeric units of decomposed PHOSS to NaOD was estimated to be 0.64. A possible decomposition mechanism was discussed. The initiation reaction was the abstraction of a methylene proton anti to a sulfonyl group by alkali, followed by the main chain scission of the polymer. The resonance structure stabilizing a terminal phenolate anion possibly enhanced the elimination of HESA, so that it was produced in quantity comparable to HOSt. The decomposition of PHOSS in alkaline aqueous solutions was a conformation‐determined polymer degradation following Hofmann's rule. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2760–2766, 2000     

Synthesis of polymers in aqueous solutions: Polyaddition of bis(oxazolines) with dithiol in aqueous solutions

Polyaddition of bis(4-mercaptophenyl) sulfide ( BMPS ) with m-phenylenebis(2-oxazoline) ( MPBO ) proceeded very smoothly in the mixtures of aprotic ploar solvents such as N-methyl-2-pyrrolidone ( NMP ) with water to produce the corresponding poly(amide–sulfide) with high molecular weights at 90°C under nitrogen. The reaction of BMPS with MPBO , p-phenylenebis(2-oxazoline), and 1,4-butylenebis(2-oxazoline) was also examined in water under the same conditions, and it was found that the reaction proceeds successfully to give the corresponding poly(amide–sulfide)s with high molecular weights. These results mean that water along as well as the mixed solvents of aprotic polar solvents such as NMP with water can be uses as suitable reaction media for the polyaddition of bis(oxazolines) with dithiol to synthesize poly(amide—sulfide)s with high molecular weights. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2711–2717, 1997     

Mechanism of interaction between hydroxypropyl cellulose and water in aqueous solutions: Importance of polymer chain length

The utilization of hydroxypropyl cellulose (HPC) can be regarded as unexpected with regard to certain applications, such as being employed as a solubility enhancer for poorly soluble drugs and as a solubilizing agent for nano-suspensions and amorphous solid dispersions. However, the best results were obtained for low-molecular weight (M_w) HPC grades with a short-chain structure. Therefore, in this study, seven grades of HPC with different polymer chain lengths (M_w) are analyzed in various aqueous solutions by a combination of ¹H quantitative NMR spectroscopy, diffusion NMR spectroscopy, and water ligand observed via gradient spectroscopy; these investigations provide insights into the remarkable solubilizing property of HPC at the molecular and supramolecular levels. Furthermore, the hydration and the water residence time are found to be strongly dependent on the polymer chain length of HPC. The quantitative results obtained herein indicate that HPCs with shorter chain lengths retain smaller amounts of water around their hydrated molecules, as compared to their counterparts with longer chain lengths.     

An infrared spectroscopic based method for mercury(II) detection in aqueous solutions

A new method that uses solid phase extraction (SPE) coupled with FTIR spectroscopy to detect Hg(II) in aqueous samples is described. The technique is envisioned for on-site, field evaluation rather than lab-based techniques. This paper presents the “proof of principle” of this new approach toward measurements of Hg(II) in water and identifies mass transport issues that would need to be overcome in order to migrate from a lab based method to field operation. The SPE material supported on a Si wafer is derivatized with an acylthiosemicarbazide, which undergoes a reaction in the presence of aqueous Hg(II) to form an oxadiazole ring. The progress of the reaction is monitored by IR spectroscopy. Following EPA guidelines, the method of detection limit (MDL) for the SPE/IR was 5 μg of Hg(II) cm⁻². In a 1 L sample and a 1 cm² Si wafer, this translates to a detection limit of 5 ppb. This system shows a high selectivity toward aqueous Hg(II) over other thiophilic heavy metal ions such as Pb(II), Cd(II), Fe(III), and Zn(II) and other metal ions such as Ni(II), Mn(II), Co(II), Cu(II), In(III), Ru(III), Na(I), and Ag(I) in aqueous solutions.     

Sorption of some azo-dyes on wool fiber from aqueous solutions

Sorption of some azo-dyes (acid violet 17, acid blue 90, acid red 1 and direct red 80) on locally available wool fiber from aqueous solution has been investigated as a function of shaking time, pH and dyes concentration as a function of temperature. Sorption isotherms for dyes on wool fiber were obtained. It was found that the increasing temperature induces positive effect on the sorption process. Isosteric heat of adsorption (q_st) have also been calculated at different surface coverage indicating that wool fiber used possessed heterogeneous surface with site of different activity. The results also indicate that initial sorption whether chemical or physical means, occurs first on the most active sites and then, as the concentration of dyes is increased, on sites of lesser activity.     

Absorption and emission behaviour of trans-p-coumaric acid in aqueous solutions and some organic solvents

The absorption and fluorescence behaviour of trans-p-coumaric acid (trans-4-hydroxycinnamic acid) is investigated in buffered aqueous solution over a wide range from pH 1 to pH 12, in un-buffered water, and in some organic solvents. Absorption cross-section spectra, fluorescence quantum distributions, fluorescence quantum yields, and degrees of fluorescence polarisation are measured. p-Coumaric acid exists in different ionic forms in aqueous solution depending on the pH. There is an equilibrium between the neutral form (p-CAH₂) and the single anionic form (p-CAH⁻) at low pH (pK_na ≈ 4.9), and between the single anionic and the double anionic form (p-CA²⁻) at high pH (pK_aa ≈ 9.35). In the organic solvents studied trans-p-coumaric acid is dissolved in its neutral form. The fluorescence quantum yield of trans-p-coumaric acid in aqueous solution is ?_F ≈ 1.4 × 10⁻⁴ for the neutral and the single anionic form, while it is ?_F ≈ 1.3 × 10⁻³ for the double anionic form. For trans-p-coumaric acid in organic solvents fluorescence quantum yields in the range from 4.8 × 10⁻⁵ (acetonitrile) to 1.5 × 10⁻⁴ (glycerol) were measured. The fluorescence spectra are 7700–10,000 cm⁻¹ Stokes shifted in aqueous solution, and 5400–8200 cm⁻¹ Stokes shifted in the studied organic solvents. Decay paths responsible for the low fluorescence quantum yields are discussed (photo-isomerisation and internal conversion for p-CA²⁻, solvent-assisted intra-molecular charge-transfer or ππ^∗ to nπ^∗ transfer and internal conversion for p-CAH₂ and p-CAH⁻). The solvent dependence of the first ππ^∗ electronic transition frequency and of the fluorescence Stokes shift of p-CAH₂ is discussed in terms of polar solute–solvent interaction effects. Thereby the ground-state and excite-state molecular dipole moments are extracted.     

Cationic dye adsorption by acrylamide/itaconic acid hydrogels in aqueous solutions

Acrylamide/itaconic acid (AAm/IA) hydrogels containing different quantities of itaconic acid have been irradiated with γ radiation. The hydrogels were used in an experiment concerning the adsorption of cationic dyes such as Basic Blue 9, Basic Violet 1 and Basic Blue 12. In the experiments of the adsorption of dyes from their synthetic aqueous solutions, type S adsorption isotherms were found. One mole of monomeric unit of AAm/IA hydrogels adsorbed 78.5–513.1 μmole of Basic Blue 9, 60.2–641.1 μmole of Basic Violet 1 and, 28.8–593.3 μmole of Basic Blue 12, while acrylamide hydrogel did not adsorb any cationic dye. As a result, it was shown that the AAm/IA hydrogels could be used as an adsorbent for water pollutants such as dyes, and immobilization of these organic contaminants in the hydrogels from waste water can solve one of the most important environmental problems of the textile industry. © 1997 John Wiley & Sons, Ltd.     

Structure-relationships in electrocatalysis: oxygen reduction and hydrogen oxidation reactions on Pt(111) and Pt(100) in solutions containing chloride ions

Kinetics of the oxygen reduction reaction (orr) and the hydrogen evolution–oxidation reactions (her/hor) were studied on the Pt(111) and Pt(100) surfaces in 0.05 M H₂SO₄ containing Cl⁻. The orr is strongly inhibited on the (100) surface modified by adsorbed Cl⁻ (Cl_ad), and it occurs as a 3.5e⁻ reduction via solution phase peroxide formation. In the hydrogen adsorption (H_upd) potential region, the orr is even more inhibited, and corresponds only to a 2 e⁻ reduction at the negative potential limit where the electrode is covered by one monolayer of H_upd and some (unknown) amount of Cl_ad. On the Pt(111)---Cl_ad surface, the orr is inhibited relatively little (in addition to that caused by strong bisulfate anion adsorption on this surface), and the reaction pathway is the same as in Cl⁻ free solution. The kinetics of the hor on Pt(111) are the same in pure solution and in a solution containing Cl⁻, since Cl_ad does not affect platinum sites required for the breaking of the H---H bond. A relatively large inhibition of the hor is observed on the (100) surface, implying that strongly adsorbed Cl_ad is present on the surface even near 0 V.     

Fluorescence of lanthanide(III) complexes in aqueous solutions the influence ofpH and solution composition

The fluorescence of lanthanide ions and of their complexes withEDTA,NTA andAA in aqueous solutions was investigated. It has been shown that the fluorescence band intensities of Sm(III), Eu(III), Gd(III), Tb(III) and Dy(III) complexes depend on thepH and the complexing agent concentration. Fluorescence measurements were used to characterise the lanthanide complexes formed and an attempt was made to interpret the results theoretically.

---

Untersuchung der Fluoreszenz von Lösungen einiger Lanthaniden(III)-Komplex in Abhängigkeit vonpH und Zusammenhang der Lösung

Zusammenfassung Die Fluoreszenz von wäßrigen Lösungen der Ionen und Komplexe einiger Lanthaniden mit Ethylendiamintetraessigsäure, Nitrilotriessigsäure und Essigsäure wurde untersucht. Der Einfluß vonpH und Konzentration der Komplexbildner auf die Intensität der Fluoreszenzbanden von Sm(III), Eu(III), Gd(III), Tb(III) und Dy(III) wurde bewiesen. Die Fluoreszenzmessungen wurden für die Charakterisierung von Lösungen der Lanthanidenkomplexe genützt und ein Versuch der theoretischen Interpretation der beobachteten Änderungen im Spektrum wurde unternommen.

     

Depolymerization of soluble silicate in dilute aqueous solutions

Experiments with diluted solutions of a customary water glas show that the rate of depolymerization depends not only upon pH and the SiO₂ concentration, but also varies systematically as a function of the type and concentration of an additional electrolyte. Increasing cation activities of metal chlorides are causing a decrease of the rate constant in the order 1) Na⁺, K⁺, 2) Mn²⁺, Mg²⁺, Ca²⁺, Sr²⁺, 3) Zn²⁺, Ni²⁺, Ce³⁺, Cu²⁺. With respect to anions of sodium salts the rate constants are increasing with increasing activities in the order NO ₃ ^– , HCO ₃ ^– , Cl^–, SO ₄ ^2– , whereas HPO ₄ ^2– causes a decrease. The results permit to identify those components of water which are most responsible for a change of the depolymerization rate and may be used to evalute the properties of a water glass as a possible anticorrosive agent for water supply systems.     

Studies on the dynamics of poly(carboxylic acids) with covalently bound thionine and phenosafranine in dilute aqueous solutions

The poly(carboxylic acid) bound phenosafranine and thionine dyes show that, the fluorescence intensity and lifetime increases first and starts to decrease after reaching a maximum at pH 4.0. The fluorescence decay curve of the fluorophore bound polymers follow the biexponential decay fit independent of pH, while poly(MAA-Th) follows single exponential function above pH 4.0. At low pH, a more compact environment of the fluorophore exerts a more hydrophobic environment. In the subnanosecond time domain the solvation process is found to be incomplete while in the nanosecond time scale the solvation of the macromolecular chains is found to be over. The time resolved fluorescence spectra of the polymer bound fluorophores at different pH indicate distinct hydrophobic and hydrophilic environments due to the dynamics of the macromolecules in dilute aqueous solutions. For the first time structural transitions involving solvent are observed in the nanosecond and picosecond time domains for the same macromolecule.     

Detection and spectrophotometric determination of EDTA with cobalt(II) and phosphomolybdic acid in urine and detergents

A simple, rapid, sensitive and selective method for the microgram detection and spectrophotometric determination of EDTA in water, human urine and detergents, based on its reaction with Co(II) and phosphomolybdic acid at pH 0.5–2.0 is reported. Absorbance is measured against Co(II)–phosphomolybdic acid reference solution at 750 nm. The effect of time, temperature, pH and Co(II) or phosphomolybdic acid concentration is studied, and optimum operating conditions are established. Beer's law is applicable in the concentration range 0.3–1.9 μg ml⁻¹ of 10⁻⁵M EDTA. Its detection limit is 0.14 μg in the solution phase and 0.03 μg in the resin phase. The relative standard deviation is ±0.13 μg. Ag(I), Zn(II), Cu(II), Ni(II), Pb(II), Cd(II), Ca(II), Mg(II), Fe(III), Cr(III), U(VI), chloride, nitrite, phosphate, oxalate, borate and amino acids do not interfere.     

Conformation of poly(L-glutamic acid) in aqueous solutions of linear amphiphiles with a cationic group at both ends

The conformations of poly(l-glutamic acid) [P(Glu)] in solutions of the bipolar amphiphile 1,20-icosanediylbis(alkylammonium chloride) [C20(RA)₂], where RA includes trimethylammonium (TMA), dimethylammonium (DMA), or methylammonium (MA), were investigated with measurements of the circular dichroism spectra at 10–35 °C. All C20(RA)₂ induced an α-helix of P(Glu) in the aqueous solutions. The residue molar ellipticity at 222 nm showed a similar dependence on the amphiphile concentration (C _s) below 0.5 of the ratio of 2C _s to the residue concentration (C _p) of P(Glu), but it separated into three directions at 2C _s/C _p>0.5. C20(MA)₂ induced an α-helix of P(Glu) at 2C _s/C _p<0.5 followed by a helix aggregate at 2C _s/C _p>0.5. C20(DMA)₂ and C20(TMA)₂ also induced an α-helix, but a helix aggregate. C20(TMA)₂ indicated a strong temperature dependence and did not induce a complete α-helix at 35 °C. Received: 20 June 2001 Accepted: 6 September 2001     

Coagulation of poly(p-phenylene benzobisoxazole) in polyphosphoric acid using aqueous and nonaqueous solutions

Diffusion of aqueous and nonaqueous coagulants into lyotropic/nematic solutions of poly(phenylene benzobisoxazole) in polyphosphoric acid using fluorescence microscopy is reported. The fluorescence microscopy technique offers advantages in that the experiment is independent of the coagulant and the experiments can be performed in a front surface mode so that optically thin samples are not required. The diffusion process is modeled as Case II diffusion as described by Crank and Park. The apparent diffusion coefficients are found to range from ～ 2 × 10^?6 cm²/s to ～ 2 × 10^?7 cm²/s for aqueous and nonaqueous coagulants. The apparent diffusion coefficients can be varied by several orders of magnitude (e.g., down to ～ 3 × 10^?10 cm²/s) by varying the concentration of polyphosphoric acid in the coagulant. © 1995 John Wiley & Sons, Inc.