Reactivity of Mo(PMe3)6 towards benzothiophene and selenophenes: new pathways relevant to hydrodesulfurization

Mo(PMe(3))(6) cleaves a C-S bond of benzothiophene to give (kappa(2)-CHCHC(6)H(4)S)Mo(PMe(3))(4), which rapidly isomerizes to the olefin-thiophenolate and 1-metallacyclopropene-thiophenolate complexes, (kappa(1),eta(2)-CH(2)CHC(6)H(4)S)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)) and (kappa(1),eta(2)-CH(2)CC(6)H(4)S)Mo(PMe(3))(4). The latter two molecules result from a series of hydrogen transfers and are differentiated according to whether the termini of the organic fragments coordinate as olefin or eta(2)-vinyl ligands, respectively. The reactions between Mo(PMe(3))(6) and selenophenes proceed differently from those of the corresponding thiophenes. For example, whereas Mo(PMe(3))(6) reacts with thiophene to give eta(5)-thiophene and butadiene-thiolate complexes, (eta(5)-C(4)H(4)S)Mo(PMe(3))(3) and (eta(5)-C(4)H(5)S)Mo(PMe(3))(2)(eta(2)-CH(2)PMe(2)), selenophene affords the metallacyclopentadiene complex [(kappa(2)-C(4)H(4))Mo(PMe(3))(3)(Se)](2)[Mo(PMe(3))(4)] in which the selenium has been completely abstracted from the selenophene moiety. Likewise, in addition to (kappa(1),eta(2)-CH(2)CC(6)H(4)Se)Mo(PMe(3))(4) and (kappa(1),eta(2)-CH(2)CHC(6)H(4)Se)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)), which are counterparts of the species observed in the benzothiophene reaction, the reaction of Mo(PMe(3))(6) with benzoselenophene yields products resulting from C-C coupling, namely [kappa(2),eta(4)-Se(C(6)H(4))(CH)(4)(C(6)H(4))Se]Mo(PMe(3))(2) and [mu-Se(C(6)H(4))(CH)C(CH)(2)(C(6)H(4))](mu-Se)[Mo(PMe(3))(2)][Mo(PMe(3))(2)H].     

Isomeric effects in the gas-phase reactions of dichloroethene, C2H2CL2, with a series of cations

A study of the reactions of a series of gas-phase cations (NH(4)(+), H(3)O(+), SF(3)(+), CF(3)(+), CF(+), SF(5)(+), SF(2)(+), SF(+), CF(2)(+), SF(4)(+), O(2)(+), Xe(+), N(2)O(+), CO(2)(+), Kr(+), CO(+), N(+), N(2)(+), Ar(+), F(+), and Ne(+)) with the three structural isomers of dichloroethene, i.e., 1,1-C(2)H(2)Cl(2), cis-1,2-C(2)H(2)Cl(2), and trans-1,2-C(2)H(2)Cl(2) is reported. The recombination energy (RE) of these ions spans the range of 4.7-21.6 eV. Reaction rate coefficients and product branching ratios have been measured at 298 K in a selected ion flow tube (SIFT). Collisional rate coefficients are calculated by modified average dipole orientation (MADO) theory and compared with experimental data. Thermochemistry and mass balance have been used to predict the most feasible neutral products. Threshold photoelectron-photoion coincidence spectra have also been obtained for the three isomers of C(2)H(2)Cl(2) with photon energies in the range of 10-23 eV. The fragment ion branching ratios have been compared with those of the flow tube study to determine the importance of long-range charge transfer. A strong influence of the isomeric structure of dichloroethene on the products of ion-molecule reactions has been observed for H(3)O(+), CF(3)(+), and CF(+). For 1,1-C(2)H(2)Cl(2) the reaction with H(3)O(+) proceeds at the collisional rate with the only ionic product being 1,1-C(2)H(2)Cl(2)H(+). However, the same reaction yields two more ionic products in the case of cis-1,2- and trans-1,2-C(2)H(2)Cl(2), but only proceeds with 14% and 18% efficiency, respectively. The CF(3)(+) reaction proceeds with 56-80% efficiency, the only ionic product for 1,1-C(2)H(2)Cl(2) being C(2)H(2)Cl(+) formed via Cl(-) abstraction, whereas the only ionic product for both 1,2-isomers is CHCl(2)(+) corresponding to a breaking of the C=C double bond. Less profound isomeric effects, but still resulting in different products for 1,1- and 1,2-C(2)H(2)Cl(2) isomers, have been found in the reactions of SF(+), CO(2)(+), CO(+), N(2)(+), and Ar(+). Although these five ions have REs above the ionization energy (IE) of any of the C(2)H(2)Cl(2) isomers, and hence the threshold for long-range charge transfer, the results suggest that the formation of a collision complex at short range between these ions and C(2)H(2)Cl(2) is responsible for the observed effects.     

Synthesis and characterization of a twin Cubane-type molybdenum-rhodium-sulfur cluster, [{Mo3RhCp*S4(H2O)7(O)}2]8+. X-ray structure of [{Mo3RhCpS4(H2O7O}2](CH3C6H4SO3)(8).14H2O

The reaction of [Mo(3)S(4)(H(2)O)(9)](4+) (1) with [(CpRhCl(2))(2)] afforded a novel rhodium-molybdenum cluster, [{Mo(3)RhCpS(4)(H(2)O)(7)(O)}(2)](8+) (2). X-ray structure analysis of [2](pts)(8).14H(2)O (pts(-) = CH(3)C(6)H(4)SO(3)(-)) has revealed the existence of a new oxo-bridged twin cubane-type core, (Mo(3)RhCpS(4))(2)(O)(2). The high affinity of the CpRh group for sulfur atoms in 1 seems to be the main driving force for this reaction. The strong Lewis acidity of the CpRh group in intermediate A, [Mo(3)RhCpS(4)(H(2)O)(9)](6+), caused a release of proton from one of the water molecules attached to the molybdenum atoms to give intermediate B, [Mo(3)RhCpS(4)(H(2)O)(8)(OH)](5+). The elimination of two water molecules from two intermediate B molecules, followed by the deprotonation reaction of hydroxo bridges, generated the twin cubane-type cluster 2. The formal oxidation states of rhodium and molybdenum atoms are the same before and after the reaction (i.e., Mo(IV)(3), Rh(III)). The Mo-O-Mo moieties in [2](pts)(8).14H(2)O are nearly linear with a bond angle of 164.3(3) degrees, and the basicity of the bridging oxygen atoms seems to be weak. For this reason, protonation at the bridging oxygen atoms does not occur even in a strongly acidic aqueous solution. The binding energy values of Mo 3d(5/2), Rh 3d(5/2), and C 1s obtained from X-ray photoelectron spectroscopy measurements for [2](pts)(8).14H(2)O are 229.8, 309.3, and 285 eV, respectively. The XPS measurements on the Rh 3d(5/2) binding energy indicate that the oxidation state of Rh is 3+. The binding energy of Mo 3d(5/2) (229.8 eV) compares with that observed for [1](pts)(4).7H(2)O (230.7 eV, Mo 3d(5/2)). A lower energy shift (0.9 eV) is observed in the binding energy of Mo 3d(5/2) for [2](pts)(8).14H(2)O. This energy shift may correspond to the coordination of an oxygen atom having a negative charge to the molybdenum atom.     

Controlled direct synthesis of C-mono- and C-disubstituted derivatives of [3,3'-Co(1,2-C2B9H11)2]- with organosilane groups: theoretical calculations compared with experimental results

Mono- and dilithium salts of [3,3'-Co(1,2-C(2)B(9)H(11))(2)](-), (1(-)), react with different chlorosilanes (Me(2)SiHCl, Me(2)SiCl(2), Me(3)SiCl and MeSiHCl(2)) with an accurate control of the temperature to give a set of novel C(c)-mono- (C(c) = C(cluster)) and C(c)-disubstituted cobaltabis(dicarbollide) derivatives with silyl functions: [1-SiMe(2)H-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (3(-)); [1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (4(-)); [1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (5(-)); [1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (6(-)) and [1,1'-(SiMe(3))(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (7(-)). In a similar way, the [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (8(-)); [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (9(-)) and [8,8'-mu-(1',2'-C(6)H(4))-1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(9))(1',2'-C(2)B(9)H(10))](-) (10(-)) ions have been prepared from [8,8'-mu-(1',2'-C(6)H(4))-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (2(-)). Thus, depending on the chlorosilane, the temperature and the stoichiometry of nBuLi used, it has been possible to control the number of substituents on the C(c) atoms and the nature of the attached silyl function. All compounds were characterised by NMR and UV/Vis spectroscopy and MALDI-TOF mass spectrometry; [NMe(4)]-3, [NMe(4)]-4 and [NMe(4)]-7 were successfully isolated in crystalline forms suitable for X-ray diffraction analyses. The 4(-) and 8(-) ions, which contain one bridging -mu-SiMe(2) group between each of the dicarbollide clusters, were unexpectedly obtained from the reaction of the monolithium salts of 1(-) and 2(-), respectively, with Me(2)SiHCl at -78 degrees C in 1,2-dimethoxyethane. This suggests that an intramolecular reaction has taken place, in which the acidic C(c)-H proton reacts with the hydridic Si-H, with subsequent loss of H(2). Some aspects of this reaction have been studied by using DFT calculations and have been compared with experimental results. In addition, DFT theoretical studies at the B3 LYP/6-311G(d,p) level of theory were applied to optimise the geometries of ions 1(-)-10(-) and calculate their relative energies. Results indicate that the racemic mixtures, rac form, are more stable than the meso isomers. A good concordance between theoretical studies and experimental results has been achieved.     

1,2-Dibromoethane on Cu(100): bonding structure and transformation to C2H4

Temperature-programmed reaction/desorption, mass spectrometry, reflection-absorption infrared spectroscopy, x-ray photoelectron spectroscopy, and density functional theory calculations have been employed to explore the reaction and bonding structure of 1,2-C(2)H(4)Br(2) on Cu(100). Both the trans and gauche conformers are found to dissociate by breaking the C-Br bonds on clean Cu(100) at 115 K, forming C(2)H(4) and Br atoms. Theoretical investigations for the possible paths of 1,2-C(2)H(4)Br(2) → C(2)H(4) + 2Br on Cu(100) suggest that the barriers of the trans and gauche molecules are in the ranges of 0-4.2 and 0-6.5 kcal/mol, respectively. The C-Br scission temperature of C(2)H(4)Br(2) is much lower than that (~170 K) of C(2)H(5)Br on Cu(100). Adsorbed Br atoms can decrease the dissociation rate of the 1,2-C(2)H(4)Br(2) molecules impinging the surface. The 1,2-C(2)H(4)Br(2) molecules adsorbed in the first monolayer are structurally distorted. Both the trans and gauche molecules exist in the second monolayer, but with no preferential adsorption orientation. However, the trans molecule is the predominant species in the third or higher layer formed at 115 K. The layer structure is not thermally stable. Upon heating the surface to 150 K, the orientation of the trans 1,2-C(2)H(4)Br(2) molecules in the layer changes, leading to the rotation of the BrCCBr skeletal plane toward the surface normal on average and the considerable growth of the CH(2) scissoring peak. On oxygen-precovered Cu(100), decomposition of 1,2-C(2)H(4)Br(2) to form C(2)H(4) is hampered and no oxygenated hydrocarbons are formed. The presence of the oxygen atoms also increases the adsorption energy of the second-layer molecules.     

Reactions of halofluorocarbons with group 6 complexes M(C(5)H(5))(2)L (M = Mo, W; L = C(2)H(4), CO). Fluoroalkylation at molybdenum and tungsten, and at cyclopentadienyl or ethylene ligands.

The molybdenum(II) and tungsten(II) complexes [MCp(2)L] (Cp = eta(5)-cyclopentadienyl; L = C(2)H(4), CO) react with perfluoroalkyl iodides to give a variety of products. The Mo(II) complex [MoCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide or perfluorobenzyl iodide with loss of ethylene to give the first examples of fluoroalkyl complexes of Mo(IV), MoCp(2)(CF(2)CF(2)CF(2)CF(3))I (8) and MoCp(2)(CF(2)C(6)F(5))I (9), one of which (8) has been crystallographically characterized. In contrast, the CO analogue [MoCp(2)(CO)] reacts with perfluorobenzyl iodide without loss of CO to give the crystallographically characterized salt, [MoCp(2)(CF(2)C(6)F(5))(CO)](+)I(-) (10), and the W(II) ethylene precursor [WCp(2)(C(2)H(4))] reacts with perfluorobenzyl iodide without loss of ethylene to afford the salt [WCp(2)(CF(2)C(6)F(5))(C(2)H(4))](+)I(-) (11). These observations demonstrate that the metal-carbon bond is formed first. In further contrast the tungsten precursor [WCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide, perfluoro-iso-propyl iodide, and pentafluorophenyl iodide to give fluoroalkyl- and fluorophenyl-substituted cyclopentadienyl complexes WCp(eta(5)-C(5)H(4)R(F))(H)I (12, R(F) = CF(2)CF(2)CF(2)CF(3); 15, R(F) = CF(CF(3))(2); 16, R(F) = C(6)F(5)); the Mo analogue MoCp(eta(5)-C(5)H(4)R(F))(H)I (14, R(F) = CF(CF(3))(2)) is obtained in similar fashion. The tungsten(IV) hydrido compounds react with iodoform to afford the corresponding diiodides WCp(eta(5)-C(5)H(4)R(F))I(2) (13, R(F) = CF(2)CF(2)CF(2)CF(3); 18, R(F) = CF(CF(3))(2); 19, R(F) = C(6)F(5)), two of which (13 and 19) have been crystallographically characterized. The carbonyl precursors [MCp(2)(CO)] each react with perfluoro-iso-propyl iodide without loss of CO, to afford the exo-fluoroalkylated cyclopentadiene M(II) complexes MCp(eta(4)-C(5)H(5)R(F))(CO)I (21, M = Mo; 22, M = W); the exo-stereochemistry for the fluoroalkyl group is confirmed by an X-ray structural study of 22. The ethylene analogues [MCp(2)(C(2)H(4))] react with perfluoro-tert-butyl iodide to yield the products MCp(2)[(CH(2)CH(2)C(CF(3))(3)]I (25, M = Mo; 26, M = W) resulting from fluoroalkylation at the ethylene ligand. Attempts to provide positive evidence for fluoroalkyl radicals as intermediates in reactions of primary and benzylic substrates were unsuccessful, but trapping experiments with CH(3)OD (to give R(F)D, not R(F)H) indicate that fluoroalkyl anions are the intermediates responsible for ring and ethylene fluoroalkylation in the reactions of secondary and tertiary fluoroalkyl substrates.     

Calculational and experimental investigations of the pressure effects on radical-radical cross combination reactions: C2H5+C2H3

Pressure-dependent product yields have been experimentally determined for the cross-radical reaction C2H5 + C2H3. These results have been extended by calculations. It is shown that the chemically activated combination adduct, 1-C4H8*, is either stabilized by bimolecular collisions or subject to a variety of unimolecular reactions including cyclizations and decompositions. Therefore the "apparent" combination/disproportionation ratio exhibits a complex pressure dependence. The experimental studies were performed at 298 K and at selected pressures between about 4 Torr (0.5 kPa) and 760 Torr (101 kPa). Ethyl and vinyl radicals were simultaneously produced by 193 nm excimer laser photolysis of C2H5COC2H3 or photolysis of C2H3Br and C2H5COC2H5. Gas chromatograph/mass spectrometry/flame ionization detection (GC/MS/FID) were used to identify and quantify the final reaction products. The major combination reactions at pressures between 500 (66.5 kPa) and 760 Torr are (1c) C2H5+C2H3-->1-butene, (2c) C2H5 + C2H5-->n-butane, and (3c) C2H3+C2H3-->1,3-butadiene. The major products of the disproportionation reactions are ethane, ethylene, and acetylene. At moderate and lower pressures, secondary products, including propene, propane, isobutene, 2-butene (cis and trans), 1-pentene, 1,4-pentadiene, and 1,5-hexadiene are also observed. Two isomers of C4H6, cyclobutene and/or 1,2-butadiene, were also among the likely products. The pressure-dependent yield of the cross-combination product, 1-butene, was compared to the yield of n-butane, the combination product of reaction (2c), which was found to be independent of pressure over the range of this study. The [1-C4H8]/[C4H10] ratio was reduced from approximately 1.2 at 760 Torr (101 kPa) to approximately 0.5 at 100 Torr (13.3 kPa) and approximately 0.1 at pressures lower than about 5 Torr (approximately 0.7 kPa). Electronic structure and RRKM calculations were used to simulate both unimolecular and bimolecular processes. The relative importance of C-C and C-H bond ruptures, cyclization, decyclization, and complex decompositions are discussed in terms of energetics and structural properties. The pressure dependence of the product yields were computed and dominant reaction paths in this chemically activated system were determined. Both modeling and experiment suggest that the observed pressure dependence of [1-C4H8]/[C4H10] is due to decomposition of the chemically activated combination adduct 1-C4H8* in which the weaker allylic C-C bond is broken: H2C=CHCH2CH3-->C3H5+CH3. This reaction occurs even at moderate pressures of approximately 200 Torr (26 kPa) and becomes more significant at lower pressures. The additional products detected at lower pressures are formed from secondary radical-radical reactions involving allyl, methyl, ethyl, and vinyl radicals. The modeling studies have extended the predictions of product distributions to different temperatures (200-700 K) and a wider range of pressures (10(-3)-10(5) Torr). These calculations indicate that the high-pressure [1-C4H8]/[C4H10] yield ratio is 1.3+/-0.1.     

Restricted rotation in unbridged sandwich complexes: rotational behavior of closo-[Co(eta 5-NC4H4)(C2B9H11)] derivatives

Rotation about the centroid/metal/centroid axis in ferrocene is facile; the activation energy is 1-5 kcal mol(-1). The structurally similar sandwich complexes derived from closo-[3-Co(eta5-NC4H4)-1,2-C2B9H11] (1) have a different rotational habit. In 1, the cis rotamer in which the pyrrolyl nitrogen atom bisects the carboranyl cluster atoms is 3.5 kcal mol(-1) more stable in energy than the rotamer that is second lowest in energy. This cis rotamer is wide, spanning 216 degrees , and may be split into three rotamers of almost equal energy by substituting the N and the carboranyl carbon atoms adequately. To support this statement, closo-[3-Co(eta5-NC4H4)-1,2-(CH3)2-1,2-C2B9H9] (2), closo-[3-Co(eta5-NC4H4)-1,2-(mu-CH2)3-1,2-C2B9H9] 3, 2-->BF3, and 3-->BF3 have been prepared. Two rotamers are found at low temperature for 2-->BF(3) and 3-->BF3. Compounds 2, 3, and 1-->BF3 behave similarly to 1. Rotational energy barriers and the relative populations of the different energy states are calculated from 1H DNMR spectroscopy (DNMR, dynamic NMR). These results agree with those of semiempirical calculations. Without exception, the cis rotamer is energetically the more stable. The fixed conformation of 1 assists in elucidating the rotational preferences of the [3,3'-Co(1,2-C2B9H11)2]- ion in the absence of steric hindrance; the [3,3'-Co(1,2-C2B9H11)2]- ion is commonly accepted to present a cisoid orientation. Complex 1 is electronically similar to the [3,3'-Co(1,2-C2B9H11)2]- ion. Both have heteroatoms in the pi ligands, and they have the same electronegativity difference between the constituent atoms. This leads to a view of the [NC4H4]- as [7,8-C2B9H11]2- ion, with no steric implications. Therefore the [3,3'-Co(1,2-C2B9H11)2]- ion should be considered to have a cisoid structure, and the different rotamers observed to be the result of steric factors and of the interaction of the counterion with either B-H groups and/or ancillary ligands. The rotamer adopted is the one with the atoms holding the negative charges furthest apart.     

New chemistry of 1,2-closo-P2B10H10 and 1,2-closo-As2B10H10; in silico and gas electron diffraction structures, and new metalladiphospha- and metalladiarsaboranes

The molecular structures of 1,2-closo-P(2)B(10)H(10) (1) and 1,2-closo-As(2)B(10)H(10) (2) have been determined by gas electron diffraction and the results obtained compared with those from computation at the MP2/6-31G** level of theory. The level of agreement is good for 2 (root-mean-square [rms] misfit for As and B atoms 0.0297 ?) and very good for 1 (rms misfit for P and B atoms 0.0082 ?). In comparing the structures of 1 and 2 with that of 1,2-closo-C(2)B(10)H(12) (I) it is evident that expansion of the polyhedron from I to 1 to 2 is restricted only to the heteroatom vertices and the B(6) face to which these are bound. Following deboronation (at B3) and subsequent metallation, compounds 1 and 2 have been converted into the new metalladiheteroboranes 3-(η-C(9)H(7))-3,1,2-closo-CoAs(2)B(9)H(9) (4), 3-(η-C(10)H(14))-3,1,2-closo-RuAs(2)B(9)H(9) (5), 3-(η-C(5)H(5))-3,1,2-closo-CoP(2)B(9)H(9) (6), 3-(η-C(9)H(7))-3,1,2-closo-CoP(2)B(9)H(9) (7) and 3-(η-C(10)H(14))-3,1,2-closo-RuP(2)B(9)H(9) (8), the last three constituting the first examples of metalladiphosphaboranes. Together with the known compound 3-(η-C(5)H(5))-3,1,2-closo-CoAs(2)B(9)H(9) (3), compounds 4-8 have been analysed by NMR spectroscopy and (except for 8) single-crystal X-ray diffraction. The (11)B NMR spectra of analogous pairs of metalladiphosphaborane and metalladiarsaborane (6 and 3, 7 and 4, 8 and 5) reveal a consistently narrower (9-10 ppm) chemical shift range for the metalladiarsaboranes, the combined result of a deshielding of the lowest frequency resonance (B6) and an increased shielding of the highest frequency resonance (B8) via an antipodal effect. In crystallographic studies, compounds 3 and 5B (one of two crystallographically-independent molecules) suffer As/B disorder, but in both cases it was possible to refine distinct, ordered, components of the disorder, the first time this has been reported for metalladiarsaboranes. Moreover, whilst the Cp compounds 6 and 3 are disordered, their indenyl analogues 7 and 4 are either ordered or significantly less disordered, a consequence of both the reduced symmetry of an indenyl ligand compared to a Cp ligand and the preference of the former for a distinct conformation relative to the cage heteroatoms. Unexpectedly, whilst this conformation in the cobaltadiphosphaborane 7 is cis-staggered (similar to that previously established for the analogous cobaltadicarborane), in the cobaltadiarsaborane 4 the conformation is close to cis-eclipsed.     

[C6N2H18]2[Mo5O15(HPO4)2]·H2O的水热合成与结构表征

通过水热法合成了一个新化合物[C6N2H18]2[Mo5O15(HPO4)2]·H2O,并通过IR光谱、ICP、元素分析、差热与热重分析和X射线单晶衍射分析等手段进行了表征.结果表明,晶体属三方晶系,P3(2)21空间群,a=1.1231(1)nm,c=2.2802(5)nm,V=2.4911(7)nm3,Dx=2.835Mg/m3,Z=6,最后的一致性因子R=0.0227,wR=0.0675.阴离子中Mo5O15构成一环状结构,2个HPO4一个连在环的下方,一个连在环的上方,形成类似于“飞碟”状的结构,阳离子为2个质子化的四甲基乙二胺.     

Borane reaction chemistry. Alkyne insertion reactions into boron-containing clusters. Products from the thermolysis of [6,9-(2-HC[triple bond]C-C5H4N)2-arachno-B10H12

The stirring of [ortho-(HC[triple bond]C)-C(5)H(4)N] with [nido-B(10)H(14)] in benzene affords [6,9-{ortho-(HC[triple bond]C)-C(5)H(4)N}(2)-arachno-B(10)H(12)] 1 in 93% yield. In the solid state, 1 has an extended complex three-dimensional structure involving intramolecular dihydrogen bonding, which accounts for its low solubility. Thermolysis of 1 gives the known [1-(ortho-C(5)H(4)N)-1,2-closo-C(2)B(10)H(11)] 2 (13%), together with new [micro-5(N),6(C)-(NC(5)H(4)-ortho-CH(2))-nido-6-CB(9)H(10)] 3 (0.4%), [micro-7(C),8(N)-(NC(5)H(4)-ortho-CH(2))-nido-7-CB(10)H(11)] (0.4%) , 4 binuclear [endo-6'-(closo-1,2-C(2)B(10)H(10))-micro-(1(C),exo-6'(N))-(ortho-C(5)H(4)N)-micro-(exo-8'(C),exo-9'(N))-(ortho-(CH(2)CH(2))-C(5)H(4)N)-arachno-B(10)H(10)] (0.5%) 5, and [exo-6(C)-endo-6(N)-(ortho-(CH[double bond]CH)-C(5)H(4)N)-exo-9(N)-(ortho-(HC[triple bond]C)-C(5)H(4)N)-arachno-B(10)H(11)] 6. An improved solvent-free route to 2 is also presented. This set of compounds features an increasing cluster incorporation of the ethynyl moiety, initially by an effective internal hydroboration, affording an arachno to nido and then a nido to arachno:closo sequence of cluster geometry. An alternative low-temperature route to internal hydroboration is demonstrated in the room temperature reaction of [closo-B(11)H(11)][N(n)Bu(4)](2) with CF(3)COOH and [ortho-(HC[triple bond]C)-C(5)H(4)N], which gives [micro-1(C),2(B)-[ortho-C(5)H(4)N-CH(2)]-closo-1-CB(11)H(10)] 7 (40%) in which one carbon atom is incorporated into the cluster; a similar reaction with [ortho-(N[triple bond]C)-C(5)H(4)N] affords [N(n)Bu(4)][7-(ortho-N[triple bond]C-C(5)H(4)N)-nido-B(11)H(12)], 8 (68%) and stirring [ortho-(N[triple bond]C)-C(5)H(4)N] with [nido-B(10)H(14)] quantitatively affords the cyano analogue of 1, [6,9-{ortho-(N[triple bond]C)-C(5)H(4)N}(2)-arachno-B(10)H(12)] 9. All compounds were characterised by single-crystal X-ray diffraction analysis and NMR spectroscopy.     

Sulfido-bridged dinuclear molybdenum-copper complexes related to the active site of CO dehydrogenase: [(dithiolate)Mo(O)S2Cu(SAr)]2- (dithiolate = 1,2-S2C6H4, 1,2-S2C6H2-3,6-Cl2, 1,2-S2C2H4)

The [MoCu] carbon monoxide dehydrogenase (CODH) is a Cu-containing molybdo-flavoprotein, the active site of which contains a pterin-dithiolene cofactor bound to a sulfido-bridged dinuclear Mo-Cu complex. In this paper, the synthesis and characterization of dinuclear Mo-Cu complexes relevant to the active site of [MoCu]-CODH are described. Reaction of [MoO2S2]2- with CuCN affords the dinuclear complex [O2MoS2Cu(CN)]2- (1), in which the CN- ligand can be replaced with various aryl thiolates to give rise to a series of dinuclear complexes [O2MoS2Cu(SAr)]2- (Ar = Ph (2), o-Tol (3), and p-Tol (4)). An alternative synthesis of complex 2 is the reaction of [MoO2S2]2- with [Cu(SPh)3]2-. Similarly, [O2MoS2Cu(PPh3)]- (5), [O2MoS2Cu(dppe)]- (dppe = 1,2-bis(diphenylphosphino)ethane) (6), and [O2MoS2Cu(triphos)]- (triphos = 1,1,1-tris[(diphenylphosphino)methyl]ethane) (7) were prepared from the reactions of [MoO2S2]2- with the Cu(I) phosphine complexes. Treatment of 1, 2, 4, or 5 with dithiols (1,2-(SH)2C6H4, 1,2-(SH)2C6H2-3,6-Cl2, and 1,2-(SH)2C2H4), in acetonitrile, leads to the replacement of a molybdenum-bound oxo ligand to yield [(dithiolate)Mo(O)S2CuL]2- (L = CN, SAr; dithiolate = 1,2-S2C6H4, 1,2-S2C6H2-3,6-Cl2, or 1,2-S2C2H4) (8-13) or [(1,2-S2C6H4)Mo(O)S2Cu(PPh3)]- (14) complexes.     

Unassisted eta2-coordination of polycyclic aromatic hydrocarbons to platinum(II)

The coordination of phenanthrene to the d8 Pt(II) center in (SP-4-2)-[Pt(C6F5)2(CO)(eta2-C14H10)] causes a slight pyramidalization at the metal-bound C atoms (C9 and C10), but no perceptible elongation of the corresponding C-C bond [C(13)-C(14) 132.0(5) vs. 133.8(5) pm in the free ligand].     

Functionalization of hafnium oxamidide complexes prepared from CO-induced N2 cleavage

Functionalization of the nitrogen atoms in the hafnocene oxamidide complexes [Me(2)Si(η(5)-C(5)Me(4))(η(5)-C(5)H(3)-3-(t)Bu)Hf](2)(N(2)C(2)O(2)) and [(η(5)-C(5)Me(4)H)(2)Hf](2)(N(2)C(2)O(2)), prepared from CO-induced N(2) bond cleavage, was explored by cycloaddition and by formal 1,2-addition chemistry. The ansa-hafnocene variant, [Me(2)Si(η(5)-C(5)Me(4))(η(5)-C(5)H(3)-3-(t)Bu)Hf](2)(N(2)C(2)O(2)), undergoes facile cycloaddition with heterocumulenes such as (t)BuNCO and CO(2) to form new N-C and Hf-O bonds. Both products were crystallographically characterized, and the latter reaction demonstrates that an organic ligand can be synthesized from three abundant and often inert small molecules: N(2), CO, and CO(2). Treatment of [Me(2)Si(η(5)-C(5)Me(4))(η(5)-C(5)H(3)-3-(t)Bu)Hf](2)(N(2)C(2)O(2)) with I(2) yielded the monomeric iodohafnocene isocyanate, Me(2)Si(η(5)-C(5)Me(4))(η(5)-C(5)H(3)-3-(t)Bu)Hf(I)(NCO), demonstrating that C-C bond formation is reversible. Alkylation of the oxamidide ligand in [(η(5)-C(5)Me(4)H)(2)Hf](2)(N(2)C(2)O(2)) was explored due to the high symmetry of the complex. A host of sequential 1,2-addition reactions with various alkyl halides was discovered and both N- and N,N'-alkylated products were obtained. Treatment with Br?nsted acids such as HCl or ethanol liberates the free oxamides, H(R(1))NC(O)C(O)N(R(2))H, which are useful precursors for N,N'-diamines, N-heterocyclic carbenes, and other heterocycles. Oxamidide functionalization in [(η(5)-C(5)Me(4)H)(2)Hf](2)(N(2)C(2)O(2)) was also accomplished with silanes and terminal alkynes, resulting in additional N-Si and N-H bond formation, respectively.     

Synthesis,molecular structure,and C-C coupling reactions of carbeneruthenium(II) complexes with C5H5Ru(=CRR') and C5Me5Ru(=CRR') as molecular units

The ethene derivatives [(eta(5)-C(5)R(5))RuX(C(2)H(4))(PPh(3))] with R=H and Me, which have been prepared from the eta(3)-allylic compounds [(eta(5)-C(5)R(5))Ru(eta(3)-2-MeC(3)H(4))(PPh(3))] (1, 2) and acids HX under an ethene atmosphere, are excellent starting materials for the synthesis of a series of new halfsandwich-type ruthenium(II) complexes. The olefinic ligand is replaced not only by CO and pyridine, but also by internal and terminal alkynes to give (for X=Cl) alkyne, vinylidene, and allene compounds of the general composition [(eta(5)-C(5)R(5))RuCl(L)(PPh(3))] with L=C(2)(CO(2)Me)(2), Me(3)SiC(2)CO(2)Et, C=CHCO(2)R, and C(3)H(4). The allenylidene complex [(eta(5)-C(5)H(5))RuCl(=C=C=CPh(2))(PPh(3))] is directly accessible from 1 (R=H) in two steps with the propargylic alcohol HC triple bond CC(OH)Ph(2) as the precursor. The reactions of the ethene derivatives [(eta(5)-C(5)H(5))RuX(C(2)H(4))(PPh(3))] (X=Cl, CF(3)CO(2)) with diazo compounds RR'CN(2) yield the corresponding carbene complexes [(eta(5)-C(5)R(5))RuX(=CRR')(PPh(3))], while with ethyl diazoacetate (for X=Cl) the diethyl maleate compound [(eta(5)-C(5)H(5))RuCl[eta(2)-Z-C(2)H(2)(CO(2)Et)(2)](PPh(3))] is obtained. Halfsandwich-type ruthenium(II) complexes [(eta(5)-C(5)R(5))RuCl(=CHR')(PPh(3))] with secondary carbenes as ligands, as well as cationic species [(eta(5)-C(5)H(5))Ru(=CPh(2))(L)(PPh(3))]X with L=CO and CNtBu and X=AlCl(4) and PF(6), have also been prepared. The neutral compounds [(eta(5)-C(5)H(5))RuCl(=CRR')(PPh(3))] react with phenyllithium, methyllithium, and the vinyl Grignard reagent CH(2)=CHMgBr by displacement of the chloride and subsequent C-C coupling to generate halfsandwich-type ruthenium(II) complexes with eta(3)-benzyl, eta(3)-allyl, and substituted olefins as ligands. Protolytic cleavage of the metal-allylic bond in [(eta(5)-C(5)H(5))Ru(eta(3)-CH(2)CHCR(2))(PPh(3))] with acetic acid affords the corresponding olefins R(2)C=CHCH(3). The by-product of this process is the acetato derivative [(eta(5)-C(5)H(5))Ru(kappa(2)-O(2)CCH(3))(PPh(3))], which can be reconverted to the carbene complexes [(eta(5)-C(5)H(5))RuCl(=CR(2))(PPh(3))] in a one-pot reaction with R(2)CN(2) and Et(3)NHCl.     

Microwave spectra and structures of 1,2-(ortho)- and 1,7-(meta)-carborane, C2B10H12

The microwave spectra of 1,2- and 1,7-dicarba-closo-dodecaborane(12), C(2)B(10)H(12) (ortho- and meta-carborane), have been recorded for the first time at room temperature in the 32-88 and 24-80 GHz spectral ranges, respectively. The spectra of the parent species (1,2-C(2)(11)B(10)H(12) and 1,7-C(2)(11)B(10)H(12)) have been assigned, together with those of four monosubstituted ((10)B) 1,2-C(2)(10)B(11)B(9)H(12) and 1,7-C(2)(10)B(11)B(9)H(12) isotopologues. The microwave spectra confirm that the structures of each of these two molecules are slightly distorted icosahedrons of C(2v) symmetry. A previous determination of the gaseous structures of these two carboranes by the gas electron-diffraction method was based on several assumptions about the B-B bond length differences. All B-B bond lengths have now been redetermined using the substitution (r(s)) method, which is independent of such restraints. Although several of the r(s) and electron-diffraction bond lengths are in good agreement, there are also differences of up to 0.026 ?. Quantum chemical calculations at the B3LYP/6-311++G(3df,3pd) level of theory have also been performed.     

Redox-active pH-responsive molecules: ferrocenylphosphonic acid, ferrocenylmethylphosphonic acid and 1,1'-ferrocenylbisphosphonic acid. Structural determination of FcPO3Na2.5H2O

The acidity constants of the reduced and oxidized species of ferrocenylphosphonic acids FcPO3H2, FcCH2PO3H2 and fc(PO3H2)2 (Fc = (eta5-C5H5)Fe(eta5-C5H4), fc = (eta5-C5H4)Fe(eta5-C5H4)) in water have been evaluated by potentiometric, 31P NMR, and electrochemical methods. The oxidized forms are more acidic than the reduced ones. The interaction between the redox centre and the charged oxygen atoms of the phosphonate group is shown to be electrostatic. The maximum oxidation shift DeltaE between the protonated and unprotonated species increases with the number of charges of the substrate and decreases with the increase of the distance between the ferrocenyl centre and the oxygen atoms of the phosphonate group. The structure of FcPO3Na2.5H2O is determined. The compound crystallizes in the monoclinic system. It is lamellar with an inorganic layer formed by tetramers Na4O14, the ferrocenyl groups occupying the interlamellar space.     

Neutron diffraction and theoretical DFT studies of two dimensional molecular-based magnet K2[Mn(H2O)2]3[Mo(CN)7]2.6H2O

Exchange mechanisms and magnetic structure in the two-dimensional cyano-bridged molecule-based magnet K2[Mn(H2O)2]3[Mo(CN)7]2.6H2O have been investigated by a combination of neutron diffraction studies on both single crystal and powder samples and theoretical DFT calculations. The experimental spin density has been deduced from a new refinement of previously obtained polarized neutron diffraction (PND) data which was collected in the ordered magnetic state at 4 K under a saturation field of 3 T performed in the C2/c space group, determined by an accurate re-evaluation of the X-ray structure. Positive spin populations were observed on the two manganese sites, and negative spin populations were observed on the molybdenum site, which provides evidence of antiferromagnetic Mo3+-Mn2+ exchange interactions through the cyano bridge. The experimental data have been compared to the results of DFT calculations. Moreover, theoretical studies reveal the predominance of the spin polarization mechanism in the Mo-C-N-Mn sequence, with the antiferromagnetic nature of the interaction being due to the overlap between the magnetic orbitals relative to manganese and molybdenum in the cyano bridging region. The magnetic structure of K2[Mn(H2O)2]3[Mo(CN)7]2.6H2O has been solved at low temperature in zero field by powder neutron diffraction measurements. The structure was found to be ferrimagnetic where the manganese and molybdenum spins are aligned along the axis in opposite directions.     

A new organic-inorganic hybrid layered molybdenum(V) cobalt phosphate constructed from [H24(Mo16O32)Co16(PO4)24(OH)4(C5H4N)2(H2O)6](4-) wheels and 4,4'-bipyridine linkers

A new layered molybdenum cobalt phosphate, Na(2)[Co(H(2)O)(6)][(Mo(16)O(32))Co(16)(PO(4))(4) (HPO(4))(16)(H(2)PO(4))(4)(OH)(4)(C(10)H(8)N(2))(4)(C(5)H(4)N)(2)(H(2)O)(6)]·4H(2)O (1), has been hydrothermally synthesized and structurally characterized. 1 crystallizes in the monoclinic space group P2(1)/n with a = 15.6825(18) ?, b = 39.503(4) ?, c = 17.2763(17) ?, β = 93.791(2)°, V = 10679.4(18) ?(3), and Z = 2. A polyoxoanion of 1 exhibits an unusual organic-inorganic hybrid wheel-type cluster, in which two pyridine ligands link to the surface Co(II) atoms of a [H(24)(Mo(16)O(32))Co(16)(PO(4))(24)(OH)(4)(H(2)O)(6)] (namely, {Mo(16)Co(16)P(24)}) wheel via the Co-N bonds. Furthermore, each {Mo(16)Co(16)P(24)} wheel is connected to four adjacent wheels by four pairs of 4,4'-bipyridine linkers, forming a 2D layered network. The susceptibility measurement shows the existence of dominant antiferromagnetic interactions in 1.     

Comparative bonding behavior of functional cyclopentadienyl ligands and boron-containing analogues in heterometallic complexes and clusters

The reactivity of isolobal molybdenum carbonylmetalates containing a 2-boratanaphthalene, [Mo(eta5-2,4-MeC9H6BMe)(CO)3]- (5a) and [Mo(eta5-2,4-MeC9H6BNi-Pr2)(CO)3]- (5b), a 1-boratabenzene, [Mo(eta5-3,5-Me2C5H3BNi-Pr2)(CO)3]- (8), or a functionalized cyclopentadienyl ligand, the new metalate [Mo(eta5-C5H4Ph)(CO)3]- (7) and [Mo(eta5-C5H4NMe2)(CO)3]- (9), toward palladium (I and II) or platinum (I and II) complexes, such as trans-[PdCl2(NCPh)2], [Pd2(NCMe)6](BF4)2, trans-[PtCl2(PEt3)2], and [N(n-Bu)4]2 [Pt2Cl4(CO)2], has been investigated, and this has allowed an evaluation of the influence of the pi-bonded ligands on the structures and unprecedented coordination modes observed in the resulting metal-metal-bonded heterometallic clusters. The new 58 CVE planar-triangulated centrosymmetric clusters, [Mo2Pd2(eta5-C5H4Ph)2(CO)6(PEt3)2] (11), [Mo2Pd2(eta5-2,4-MeC9H6BNi-Pr2)2(CO)6] (12), [Mo(2)Pd(2)(eta5-3,5-Me2C5H3BNi-Pr2)2(CO)6] (13), [Mo2Pd2(eta5-C5H4NMe2)2(CO)6(PEt3)2] (15), [Mo2Pt2(eta5-C5H4NMe2)2(CO)6(PEt3)2] (16), and [Mo2Pt2(eta5-C5H4NMe2)2(CO)8] (20), have been characterized by single-crystal X-ray diffraction. Their structural features were compared with those of the 54 CVE cluster [Re2Pd2(eta5-C4H4BPh)2(CO)6)] (4), previously obtained from the borole-containing metalate [Re(eta5-C4H4BPh)(CO)3]- (2), in which a 2e-3c B-C(ipso)-Pd interaction involving the pi-ring was observed. As an extension of what has been observed in 4, clusters 12 and 13 present a direct interaction of the boratanaphthalene (12) and the boratabenzene (13) ligands with palladium. In clusters 11, 15, 16, and 20, the pi-ring does not interact with the palladium (11 and 15) or platinum centers (16 and 20), which confers to these clusters a geometry very similar to that of [Mo2Pd2(eta5-C5H5)2(CO)6(PEt3)2] (3b). The carbonylmetalates [Mo(pi-ring)(CO)3]- are thus best viewed as formal four electron donors which bridge a dinuclear d9-d9 unit. The orientation of this building block in the clusters influences the shape of their metal cores and the bonding mode of the bridging carbonyl ligands. The crystal structure of new centrosymmetric complex [Mo(eta5-C5H4Ph)(CO)3]2 (10) was determined, and it revealed intramolecular contacts of 2.773(4) A between the carbon atoms of carbonyl groups across the metal-metal bond and intermolecular bifurcated interactions between the carbonyl oxygen atoms (2.938(4) and 3.029(4) A), as well as intermolecular C-H...pi(Ar)(C=C) interactions (2.334(3) and 2.786(4) A) involving the phenyl substituents.