Mixed convection magnetohydrodynamic heat and mass transfer past a stretching surface in a micropolar fluid-saturated porous medium under the influence of Ohmic heating,Soret and Dufour effects

A numerical model is developed to examine the combined effects of Soret and Dufour on mixed convection magnetohydrodynamic heat and mass transfer in micropolar fluid-saturated Darcian porous medium in the presence of thermal radiation, non-uniform heat source/sink and Ohmic dissipation. The governing boundary layer equations for momentum, angular momentum (microrotation), energy and species transfer are transformed to a set of non-linear ordinary differential equations by using similarity solutions which are then solved numerically based on shooting algorithm with Runge–Kutta–Fehlberg integration scheme over the entire range of physical parameters with appropriate boundary conditions. The influence of Darcy number, Prandtl number, Schmidt number, Soret number and Dufour number, magnetic parameter, local thermal Grashof number and local solutal Grashof number on velocity, temperature and concentration fields are studied graphically. Finally, the effects of related physical parameters on local Skin-friction, local Nusselt number and local Sherwood number are also studied. Results showed that the fields were influenced appreciably by the Soret and Dufour effects, thermal radiation and magnetic field, etc.     

Effect of variable viscosity on MHD non-Darcy mixed convective heat transfer over a stretching sheet embedded in a porous medium with non-uniform heat source/sink

An analysis has been presented to investigate the effect of temperature-dependent viscosity on non-Darcy MHD mixed convective heat transfer past a porous medium by taking into account of Ohmic dissipation and non-uniform heat source/sink. Thermal boundary layer equation takes into account of viscous dissipation and Ohmic dissipation due to transverse magnetic field and electric field. The governing fundamental equations are first transformed into system of ordinary differential equations using self-similarity transformation and are solved numerically by using the fifth-order Runge–Kutta–Fehlberg method with shooting technique for various values of the physical parameters. The effects of variable viscosity, porosity, Eckert number, Prandtl number, magnetic field, electric field and non-uniform heat source/sink parameters on velocity and temperature profiles are analyzed and discussed. Favorable comparisons with previously published work on various special cases of the problem are obtained. Numerical results on the development of the local skin-friction co-efficient and local Nusselt number with non-uniform heat source/sink are tabulated for various physical parameters to show the interesting aspects of the solution.     

Combined effects of non-uniform heat source/sink and thermal radiation on heat transfer over an unsteady stretching permeable surface

The present paper is concerned with the study of flow and heat transfer characteristics in the unsteady laminar boundary layer flow of an incompressible viscous fluid over continuously stretching permeable surface in the presence of a non-uniform heat source/sink and thermal radiation. The unsteadiness in the flow and temperature fields is because of the time-dependent stretching velocity and surface temperature. Similarity transformations are used to convert the governing time-dependent nonlinear boundary layer equations for momentum and thermal energy are reduced to a system of nonlinear ordinary differential equations containing Prandtl number, non-uniform heat source/sink parameter, thermal radiation and unsteadiness parameter with appropriate boundary conditions. These equations are solved numerically by applying shooting method using Runge–Kutta–Fehlberg method. Comparison of numerical results is made with the earlier published results under limiting cases. The effects of the unsteadiness parameter, thermal radiation, suction/injection parameter, non-uniform heat source/sink parameter on flow and heat transfer characteristics as well as on the local Nusselt number are shown graphically.     

Heat transfer in MHD viscoelastic fluid flow over a stretching sheet with variable thermal conductivity,non-uniform heat source and radiation

An analysis has been carried out to study the magnetohydrodynamic boundary layer flow and heat transfer characteristics of a non-Newtonian viscoelastic fluid over a flat sheet with a linear velocity in the presence of thermal radiation and non-uniform heat source. The thermal conductivity is assumed to vary as a linear function of temperature. The basic equations governing the flow and heat transfer are in the form of partial differential equations, the same have been reduced to a set of non-linear ordinary differential equations by applying suitable similarity transformation. The transformed equations are solved analytically by regular perturbation method. Numerical solution of the problem is also obtained by the efficient shooting method, which agrees well with the analytical solution. The effects of various physical parameters such as viscoelastic parameter, Chandrasekhar number, Prandtl number, variable thermal conductivity parameter, Eckert number, thermal radiation parameter and non-uniform heat source/sink parameters which determine the temperature profiles are shown in several plots and the heat transfer coefficient is tabulated for a range of values of said parameters. Some important findings reported in this work reveals that combined effect of variable thermal conductivity, radiation and non-uniform heat source have significant impact in controlling the rate of heat transfer in the boundary layer region.     

Analytic solutions of unsteady boundary flow and heat transfer on a permeable stretching sheet with non-uniform heat source/sink

In this paper, we study the boundary layer flow and heat transfer on a permeable unsteady stretching sheet with non-uniform heat source/sink. The analytic solutions are obtained by using suitable similarity transformations and homotopy analysis method (HAM). Furthermore, the effects of unsteadiness parameter, Prandtl number and heat source/sink parameter on the dynamics are analyzed and discussed.     

Heat transfer in MHD viscoelastic boundary layer flow over a stretching sheet with thermal radiation and non-uniform heat source/sink

An analysis has been carried out to study the flow and heat transfer characteristics for MHD viscoelastic boundary layer flow over an impermeable stretching sheet with space and temperature dependent internal heat generation/absorption (non-uniform heat source/sink), viscous dissipation, thermal radiation and magnetic field due to frictional heating. The flow is generated due to linear stretching of the sheet and influenced by uniform magnetic field, which is applied vertically in the flow region. The governing partial differential equations for the flow and heat transfer are transformed into ordinary differential equations by a suitable similarity transformation. The governing equations with the appropriate conditions are solved exactly. The effects of viscoelastic parameter and magnetic parameter on skin friction and the effects of viscous dissipation, non-uniform heat source/sink and the thermal radiation on heat transfer characteristics for two general cases namely, the prescribed surface temperature (PST) case and the prescribed wall heat flux (PHF) case are presented graphically and discussed. The numerical results for the wall temperature gradient (the Nusselt number) are presented in tables and are discussed.     

Soret and Dufour effects on MHD slip flow with thermal radiation over a porous rotating infinite disk

In this investigation, thermal radiation effect over an electrically conducting, Newtonian fluid in a steady laminar magnetohydrodynamic convective flow over a porous rotating infinite disk with the consideration of heat and mass transfer in the presence of Soret and Dufour diffusion effects is investigated. The partial differential equations governing the problem under consideration are transformed by a similarity transformation into a system of ordinary differential equations which are solved numerically using fourth order Runge–Kutta based shooting method. The effects of the magnetic interaction parameter, slip flow parameter, Soret number, Dufour number, Schmidt number, radiation parameter, Prandtl number and suction parameter on the fluid velocity, temperature and concentration distributions in the regime are depicted graphically and are analyzed in detail. The corresponding skin-friction coefficients, the Nusselt number and the Sherwood number are also calculated and displayed in tables showing the effects of various parameters on them.     

Heat transfer in a Walter’s liquid B fluid over an impermeable stretching sheet with non-uniform heat source/sink and elastic deformation

In this present article an analysis is carried out to study the boundary layer flow behavior and heat transfer characteristics in Walter’s liquid B fluid flow. The stretching sheet is assumed to be impermeable, the effects of viscous dissipation, non-uniform heat source/sink in the presence and in the absence of elastic deformation (which was escaped from attention of researchers while formulating the viscoelastic boundary layer flow problems)on heat transfer are addressed. The basic boundary layer equations for momentum and heat transfer, which are non-linear partial differential equations, are converted into non-linear ordinary differential equations by means of similarity transformation. Analytical solutions are obtained for the resulting boundary value problems. The effects of viscous dissipation, Prandtl number, Eckert number and non-uniform heat source/sink on heat transfer (in the presence and in the absence of elastic deformation) are shown in several plots and discussed. Analytical expressions for the wall frictional drag coefficient, non-dimensional wall temperature gradient and non-dimensional wall temperature are obtained and are tabulated for various values of the governing parameters. The present study reveals that, the presence of work done by deformation in the energy equation yields an augment in the fluid’s temperature.     

Effects of temperature-dependent viscosity and variable thermal conductivity on MHD non-Darcy mixed convective diffusion of species over a stretching sheet

A numerical model is presented to study the effects of temperature-dependent viscosity and variable thermal conductivity on mixed convection problem. Two important types of wall heating conditions namely, prescribed surface temperature and prescribed wall heat flux which arise in polymer industries are considered. The problem is solved numerically by using the fifth-order Runge–Kutta Fehlberg method with shooting technique. It is found that the Prandtl number is to decrease the skin friction coefficient, local Nusselt number and local Sherwood number. The effects of non-uniform heat source/sink and porous parameter are analyzed on velocity, temperature, skin friction co-efficient, Nusselt and Sherwood numbers.     

The effect of variable viscosity on MHD viscoelastic fluid flow and heat transfer over a stretching sheet

An analysis has been carried out to study the momentum and heat transfer characteristics in an incompressible electrically conducting non-Newtonian boundary layer flow of a viscoelastic fluid over a stretching sheet. The partial differential equations governing the flow and heat transfer characteristics are converted into highly non-linear coupled ordinary differential equations by similarity transformations. The effect of variable fluid viscosity, Magnetic parameter, Prandtl number, variable thermal conductivity, heat source/sink parameter and thermal radiation parameter are analyzed for velocity, temperature fields, and wall temperature gradient. The resultant coupled highly non-linear ordinary differential equations are solved numerically by employing a shooting technique with fourth order Runge–Kutta integration scheme. The fluid viscosity and thermal conductivity, respectively, assumed to vary as an inverse and linear function of temperature. The analysis reveals that the wall temperature profile decreases significantly due to increase in magnetic field parameter. Further, it is noticed that the skin friction of the sheet decreases due to increase in the Magnetic parameter of the flow characteristics.     

Similarity solution of boundary layer stagnation-point flow towards a heated porous stretching sheet saturated with a nanofluid with heat absorption/generation and suction/blowing: A Lie group analysis

In this paper, heat and mass transfer analysis for boundary layer stagnation-point flow over a stretching sheet in a porous medium saturated by a nanofluid with internal heat generation/absorption and suction/blowing is investigated. The governing partial differential equation and auxiliary conditions are converted to ordinary differential equations with the corresponding auxiliary conditions via Lie group analysis. The boundary layer temperature, concentration and nanoparticle volume fraction profiles are then determined numerically. The influences of various relevant parameters, namely, thermophoresis parameter Nt, Brownian motion parameter Nb, Lewis number Le, suction/injection parameter S, permeability parameter k₁, source/sink parameter λ and Prandtl parameter Pr on temperature and concentration as well as wall heat flux and wall mass flux are discussed. Comparison with published results is presented.     

The effects of chemical reaction,Hall and ion-slip currents on MHD flow with temperature dependent viscosity and thermal diffusivity

In this paper, the problem of magneto-micropolar fluid flow, heat and mass transfer with suction and blowing through a porous medium is analyzed numerically. This problem was studied under the effects of chemical reaction, Hall, ion-slip currents, variable viscosity and variable thermal diffusivity. The governing fundamental equations are approximated by a system of non-linear ordinary differential equation. This system is solved numerically by using the Chebyshev pseudospectral method. Details of the velocities, temperature and concentration fields as well as the local skin-friction, the local Nusselt number and the local Sherwood number for the various values of the parameters of the problem are presented. The numerical results indicate that, the concentration decreases as the permeability parameter, the chemical reaction parameter and Schmidt number increase and it increases as variable viscosity and variable thermal diffusivity increase. The local Nusselt number and the local Sherwood number decrease as the magnetic field and ion-slip current parameters increase, whereas they increase as Hall current parameter increases. Also, there is a (non-linear) strong dependency of the concentration gradient at the wall on both Schmidt number and the mass transfer parameter.     

Convective heat and mass transfer in three-dimensional mixed convection flow of viscoelastic fluid in presence of chemical reaction and heat source/sink

Heat and mass transfer effects in the three-dimensional mixed convection flow of a viscoelastic fluid with internal heat source/sink and chemical reaction have been investigated in the present work. The flow generation is because of an exponentially stretching surface. Magnetic field normal to the direction of flow is considered. Convective conditions at the surface are also encountered. Appropriate similarity transformations are utilized to reduce the boundary layer partial differential equations into the ordinary differential equations. The homotopy analysis method is used to develop the solution expressions. Impacts of different controlling parameters such as ratio parameter, Hartman number, internal heat source/sink, chemical reaction, mixed convection, concentration buoyancy parameter and Biot numbers on the velocity, temperature and concentration profiles are analyzed. The local Nusselt and Sherwood numbers are sketched and examined.     

Nonsimilar solutions for double-diffusion boundary layers on a sphere in micropolar fluids with constant wall heat and mass fluxes

This work presents nonsimilar boundary layer solutions for double-diffusion natural convection near a sphere with constant wall heat and mass fluxes in a micropolar fluid. A coordinate transformation is employed to transform the governing equations into nondimensional nonsimilar boundary layer equations and the obtained boundary layer equations are then solved by the cubic spline collocation method. Results for the local Nusselt number and the local Sherwood number are presented as functions of the vortex viscosity parameter, Schmidt number, buoyancy ratio, and Prandtl number. Higher vortex viscosity tends to retard the flow, and thus decreases the local convection heat and mass transfer coefficients, raising the wall temperature and concentration. Moreover, the local convection heat and mass transfer coefficients near a sphere in Newtonian fluids are higher than those in micropolar fluids.     

Natural convection boundary layer flow of fluid with temperature-dependent viscosity from a horizontal elliptical cylinder with constant surface heat flux

This study deals with the temperature-dependent viscosity effects on the natural convection boundary layer on a horizontal elliptical cylinder with constant surface heat flux. The mathematical problem is reduced to a pair of coupled partial differential equations for the temperature and the stream function, and the resulting nonlinear equations are solved numerically by cubic spline collocation method. Results for the heat transfer characteristics are presented as functions of eccentric angle for various values of viscosity variation parameters, Prandtl numbers and aspect ratios. Results show that an increase in the viscosity variation parameter tends to accelerate the fluid flow near the surface and increase the maximum velocity, thus decreasing the velocity boundary layer thickness. As the viscosity variation parameter is increased, the surface temperature tends to decrease, thus increasing the local Nusselt number. Moreover, the local Nusselt number of the elliptical cylinder increases as the Prandtl number of the fluid is increased.     

Heat and mass transfer in MHD free convection from a moving permeable vertical surface by a perturbation technique

Numerical results are presented for heat and mass transfer effect on hydromagnetic flow of a moving permeable vertical surface. An analysis is performed to study the momentum, heat and mass transfer characteristics of MHD natural convection flow over a moving permeable surface. The surface is maintained at linear temperature and concentration variations. The non-linear coupled boundary layer equations were transformed and the resulting ordinary differential equations were solved by perturbation technique [Aziz A, Na TY. Perturbation methods in heat transfer. Berlin: Springer-Verlag; 1984. p. 1–184; Kennet Cramer R, Shih-I Pai. Magneto fluid dynamics for engineers and applied physicists 1973;166–7]. The solution is found to be dependent on several governing parameter, including the magnetic field strength parameter, Prandtl number, Schmidt number, buoyancy ratio and suction/blowing parameter, a parametric study of all the governing parameters is carried out and representative results are illustrated to reveal a typical tendency of the solutions. Numerical results for the dimensionless velocity profiles, the temperature profiles, the concentration profiles, the local friction coefficient and the local Nusselt number are presented for various combinations of parameters.     

Convective heat transfer in a conducting fluid over a permeable stretching surface with suction and internal heat generation/absorption

We consider a convective flow in a porous medium of an incompressible viscous conducting fluid impinging on a permeable stretching surface with suction, and internal heat generation/absorption. Using a similarity transformation the governing equations of the problem are reduced to a coupled third-order nonlinear ordinary differential equations. We first examine a number of special cases for which we may obtain exact solutions. We then obtain analytical solutions (by the Homotopy Analysis Method) and numerical solutions (by a boundary value problem solver), in order to further study the behavior of the nonlinear differential equations, for various values of the physical parameters. Our numerical solutions are shown to agree with the available results in the literature. We then employ the numerical results to bring out the effects of the suction parameter, heat source/sink parameter, stretching parameter, porosity parameter, the Prandtl number and the free convection parameter on the flow and heat transfer characteristics. In the absence of suction and free convection, our findings are in agreement with the corresponding numerical results of Attia [H.A. Attia, On the effectiveness of porosity on stagnation point flow towards a stretching surface with heat generation, Comput. Mater. Sci. 38 (2007) 741-745].     

壁面马赫数分布规律可控的新型内收缩基准流场设计方法

根据有旋特征线理论,设计出了沿程马赫数下降规律可控的轴对称基准流场,分析了基准流场的几何参数(前缘压缩角及中心体半径)的影响规律,发现选取较小的前缘压缩角和中心体半径有利于得到性能优良的基准流场;然后在设计状态Ma=6时研究了三种典型的马赫数下降规律对这种轴对称流场性能的影响。最后考虑了粘性的影响,并进行了粘性修正探索,结果表明,采用附面层位移厚度修正方法后,基准流场的壁面压力分布和无粘情况吻合良好。      

竖直平板嵌入非Darcy多孔介质时,数值研究流过平板的不稳定MHD自然对流中的Dufour和Soret效应

就竖直平板嵌入非Darcy多孔介质中,导电流体流过平板时作不稳定的二维磁流体(MHD)双扩散对流,数值研究了Dufour和Soret效应对流动的影响.用Crank-Nicolson型的隐式有限差分法,按三对角矩阵处理,求解无量纲的非线性控制方程.详细地研究了问题中出现的各种参数对不稳定无量纲的速度、温度和浓度曲线的影响.进一步地,给出并分析了表面摩擦因数、Nus-selt数和Sherwood数随时间的变化.研究结果表明,不稳定速度、温度和浓度分布曲线,受Dufour和Soret的影响十分显著.随着Dufour数的增加或者Soret数的减小,表面摩擦因数和Sherwood数都在减小,而Nusselt数在增加.研究发现,当磁场参数增加时,边界层中的速度和温度在减小.     

Lie group analysis of natural convection heat and mass transfer in an inclined surface with chemical reaction

In this paper we examine the convective flow, heat and mass transfer of an incompressible viscous fluid past a semi-infinite inclined surface with first-order homogeneous chemical reaction by Lie group analysis. The governing partial differential equations are reduced to a system of ordinary differential equations using scaling symmetries. Numerical solutions of the resulting ordinary differential equations are obtained using the fourth-order Runge–Kutta method. From the numerical results, it is observed that the thickness of the momentum boundary layer increases with increasing the chemical reaction parameter and the Schmidt number. The thicknesses of the thermal and concentration boundary layers are decreased with increasing the chemical reaction parameter and the Schmidt number.