Synthesis and solvent dependence of the photophysical properties of [60]fullerene-sugar conjugates

A method for the synthesis of optically pure C₆₀ derivatives containing one or two d-galactose or d-glucose units is described. It involves the synthesis of sugar-malonate derivatives followed by a cyclopropanation reaction with C₆₀. The solvent dependence of the photophysical properties of the methano[60]fullerene-sugar derivatives was studied using nanosecond laser flash photolysis coupled with kinetic UV-vis absorption spectroscopy and time-resolved singlet oxygen luminescence measurements. The triplet properties of these fullerenes, including transient absorption spectra, molar absorption coefficients and quantum yield for the photosensitised production of ¹O₂ were determined in toluene, benzonitrile and acetonitrile solutions. The transient absorption spectral profiles are solvent independent although small differences are observed in the transient absorption maximum: 720±5 nm for toluene, 710±5 nm for benzonitrile and 700±5 nm for acetonitrile. Triplet state molar absorption coefficients (ε_T) of C₆₀ derivatives vary from 9456±2090 M⁻¹ cm⁻¹, for compound 10 in toluene, and 15,272±4462 M⁻¹ cm⁻¹, for compound 6 in acetonitrile. Triplet state lifetimes (τ_T) for methano[60]fullerene-sugar derivatives, under our experimental conditions, are similar in toluene or benzonitrile solutions (47.5±1.1 μs≤τ_T≤51.4±2.0 μs) but are lower in acetonitrile solutions (31.8±0.6 μs≤τ_T≤43.0±1.1 μs). Toluene and benzonitrile solutions of C₆₀ derivatives have Φ_Δ close to unity.     

Synthesis and photochromic properties of novel yellow developing photochromic compounds

Two 1-thiazolyl-2-thienylcyclopentene derivatives, 1a and 2a, and a 1-thiazolyl-2-vinylcyclopentene derivative 3a have been synthesized in an attempt to obtain photochromic compounds which change the color from colorless to yellow, and have low photocycloreversion quantum yields and high absorption coefficients of the colored isomers. All of these compounds underwent reversible photochromic reactions. Compounds 1a and 2a in toluene solutions changed the color upon 313 nm light irradiation from colorless to orange and pink, in which absorption maxima were observed at 494 nm (ε=10,000 M⁻¹ cm⁻¹) and 525 nm (ε=8500 M⁻¹ cm⁻¹), respectively. On the other hand, the colorless toluene solution of 3a turned yellow upon irradiation with 313 nm light, in which the absorption maximum was observed at 416 nm (ε=17,100 M⁻¹ cm⁻¹). The photocyclization/cycloreversion quantum yields of 3 were 0.19 and 0.0014, respectively. The conversion from the open- to the closed-ring isomer of 3 in the photostationary state under irradiation with 313 nm light was close to 100%.     

Synthesis of a highly phosphorescent emitting iridium(III) complex and its application in OLEDs

A rigid ligand benzo[de]benzo[4,5]imidazo[2,1-α]isoquinolin-7-one (biio) was designed and conveniently synthesized, and the corresponding bis-cyclometalated iridium complex (biio)₂Ir(acac) (acac = acetylacetone) was prepared. The light emitting and electrochemical properties of this complex were studied. The complex has the characters of simply synthetic procedure and strong phosphorescence. The electroluminescent device using this complex as dopant was fabricated. The device had the structure of ITO/NPB (40 nm)/Ir complex:CBP (7%, 30 nm)/BCP (15 nm)/Alq₃ (30 nm)/LiF (1 nm)/Al (100 nm). The maximum emission of the device was at 496 nm. The maximum brightness of the device can reach 79640 cd m⁻² with an external quantum efficiency of 12.1% and a maximum current efficiency of 31.7 cd A⁻¹.     

Synthesis of a novel bistriazene reagent 4,4′-bis[3-(4-phenylthiazol-2-yl)triazenyl]biphenyl and its highly sensitive color reaction with mercury(II)

We report the synthesis of a novel bistriazene, 4,4′-bis(3-(4-phenylthiazol-2-yl)triazenyl)biphenyl (BPTTBP), and its highly sensitive color reaction with Hg²⁺. The new reagent was synthesized in good yield by coupling 2-amino-4-phenylthiazole with 4,4′-biphenyldiamine bisdiazonium salt. Using a blend of surfactants N-cetylpyridinium chloride (CPC) and polyethylene glycol n-octanoic phenyl ether (OP) as a micelle sensitizer, the red colored reagent assembles with Hg²⁺ in pH 9.8 borate buffer according to a 1:1 stoichiometry, forming a blue oligomeric/polymeric chelating complex with a high apparent stability constant (1.1 × 10⁸ M⁻¹). Whereas the maximum absorption of reagent occurs at 510 nm with an extinct coefficient of 1.35 × 10⁴ M⁻¹ cm⁻¹, the complex absorbs at 611 nm, with an apparent extinct coefficient of 1.04 × 10⁵ M⁻¹ cm⁻¹. Beer's law is obeyed in the range of 0-15 μg/25 mL Hg²⁺, and Sandell's sensitivity is 1.92 × 10⁻³ μg/cm². In the presence of thiourea and Na₄P₂O₇ as masking agents, the method was found free from interferences of foreign ions commonly occurring with mercury. The optimized protocol has been successfully applied to spectrophotometric determination of mercury in waste water samples. The features of the new reagent associated with its special structure were discussed, and an unprecedented “domino effect” was proposed to account for its unique chelating stoichiometry with Hg²⁺.     

Growth and spectroscopic characterization of Nd:Sr6GdSc(BO3)6 crystal

A crystal of Nd³⁺:Sr₆GdSc(BO₃)₆ with the dimension of φ20×30 mm³ was grown by Czochralski method. The grown crystal was characterized by X-ray diffraction and DSC analysis. The DSC analysis showed that the crystal congruently melt at 1306.7°C. The absorption and emission spectra of Nd³⁺:Sr₆GdSc(BO₃)₆ were investigated. The absorption band at 806 nm has a FWHM of 13 nm. The absorption and emission cross-sections are 2.33×10⁻²⁰ cm² at 806 nm and 1.58×10⁻¹⁹ cm² at 1062 nm, respectively. The luminescence lifetime τ_f is 75 μs at room temperature.     

Growth and spectroscopic properties of Nd-doped Sr3Y2 (BO3)4 crystal

A new crystal of Nd³⁺:Sr₃Y₂ (BO₃)₄ with a dimension of Φ 15×30 mm³ was grown by the Czochralski method. The grown crystal was characterized using X-ray diffraction. The absorption and emission spectra of Nd³⁺:Sr₃Y₂ (BO₃)₄ were investigated. The absorption transition at 807 nm has an FWHM of 16 nm. The absorption and emission cross sections are 6.32×10⁻²⁰ cm² at 807 nm and 1.07×10⁻¹⁹ cm² at 1065 nm, respectively. The luminescence lifetime τ_f is 51.7 μs at room temperature.     

Surface-modified CdSe quantum dots as luminescent probes for cyanide determination

Luminescent surface-modified CdSe semiconductor quantum dots (QDs), with nanoparticle (NP) size distribution in the order of 2-7 nm, have been synthesized for optical determination of cyanide ions. The nanoparticles have been functionalised with tert-butyl-N-(2-mercaptoethyl)-carbamate (BMC) groups and exhibit a strong fluorescent emission at about 580 nm with rather long fluorescence lifetimes (several hundred nanoseconds) in aerated methanolic solution. The observed luminescence emitted by the synthesized nanocrystals was tremendously increased by photo-activation under sunlight exposure. The functionalised QDs turned out to exhibit excellent long-term stability when stored in the dark (no significant changes in QDs luminescence emission intensity was observed even after two months from synthesis). The functionalisation of the NPs with carbamate ligand allowed a highly sensitive determination of free cyanide via analyte-induced changes in the photoluminescence (fluorescence quenching of intensity at 580 nm and lifetime changes) of the modified quantum dots (excited at 400 nm). A detection limit of 1.1 × 10⁻⁷ M (2.9 μg l⁻¹) of cyanide ions was obtained, while the interfering effect of other inorganic anions (including NO₃⁻, Cl⁻ or SCN⁻) was negligible even at 200-fold level concentrations in excess of cyanide.     

Spectroscopic and structural characterization of Na2[(VO)2(ttha)]·8H2O (ttha = triethylenetetraamine-N,N,N′,N″,N′″,N′″-hexaacetate): Interpreting the results with density functional theory

Na₂[(V^IVO)₂(ttha)]·8 H₂O (ttha = triethylenetetraamine–N,N,N′,N″,N′″,N′″–hexaacetate ion), prepared by treating [VO(H₂O)₅][(VO)₂(ttha)]·4 H₂O with Na₆(ttha), has been characterized by single crystal X-ray diffraction, infrared spectroscopy, UV–Vis absorption spectroscopy, electron spin resonance spectroscopy, and modeled by density functional theory (DFT). The X-ray structure revealed a distorted octahedral geometry around each vanadium center. The electronic absorption spectrum of [(VO)₂(ttha)]²⁻ (aq) features absorptions at ca. 200 nm (ε > 13900 L mol⁻¹ cm⁻¹), 255 nm (ε = 3480 L mol⁻¹ cm⁻¹), 586 nm (ε = 33 L mol⁻¹ cm⁻¹), and 770 nm (ε = 38 L mol⁻¹ cm⁻¹). The time-dependent density functional theory (TDDFT) calculated electronic absorption spectrum was remarkably similar to the actual spectrum, and TDDFT predicts absorption peaks at 297, 330, 458, 656, and 798 nm. TDDFT assigned the peak at 798 nm to be the α spin HOMO → LUMO transition. Hence, the peak at 770 nm in the actual spectrum is most likely the α spin HOMO → LUMO transition. Moreover, the TDDFT calculations revealed that the α spin HOMO and LUMO are partly comprised of d orbitals on both vanadium centers, and the first derivative electron spin resonance spectrum also suggests that the two unpaired electrons in [(VO)₂(ttha)]²⁻ are localized near the vanadium centers.     

Two-photon absorption chromophores with a tunable [2,2′]bithiophene core

Sonogashira coupling between 3,5,3′,5′-tetrabromo-[2,2′]bithiophene and various terminal alkynes provides two-photon absorption (TPA) chromophores 1-6, which possess electron donor (D) and/or acceptor (A) alkynyl substituents at 3(3′) and 5(5′) sites of the bithiophene core. The up-converted fluorescence emission excited at 800 nm (Ti:sapphire femtosecond laser, ∼100 fs pulses) was used to determine the two-photon absorption cross-sections (σ) of these compounds. The corresponding TPA cross-section (σ) values ranging from 132 to 1120 GM (10⁻⁵⁰ cm⁴ s photon⁻¹) can be fine-tuned by the substitutents. The quadrupolar-type (A-π-D-π-A) chromophore 5 exhibits the largest σ value (1120 GM) in CH₂Cl₂ upon 800 nm excitation.     

Spectrophotometric determination of carbon tetrachloride via ultrasonic oxidation of iodide accelerated by dissolved carbon tetrachloride

Ultrasonic oxidation of iodide was investigated in the presence of carbon tetrachloride (CCl₄). The ultrasonic oxidation of potassium iodide led to formation of iodine and then I₃⁻ in the presence of excess iodide, and the generated I₃⁻ shows strong UV absorption with a molar absorptivity of 2.31 × 10⁴ L mol⁻¹ cm⁻¹ at the maximum absorption wavelength of 351 nm. The ultrasonic oxidation of iodide was found to be significantly promoted by a small addition of CCl₄, and it was further found that the generation rate was increased with the amount of CCl₄ added. This can be used to analyze the level of CCl₄ dissolved in aqueous solutions. Under optimum conditions, the concentration of generated iodine (or its absorption at 351 nm) was found to correlated linearly with the concentration of CCl₄ in the range of 0.2-50 mg L⁻¹ (detection limit = 0.09 mg L⁻¹, R² = 0.999). As an alternative indirect spectrophotometric method of CCl₄ determination, the proposed method was successfully applied to determine the concentrations of CCl₄ in several practical samples, showing merits of being sensitive and simple of operation.     

Reverse atom transfer radical polymerisation (RATRP) of methacrylates using copper(I)/pyridinimine catalysts in conjunction with AIBN

N-n-Propyl-2-pyridylmethanimine, 1, N-n-octyl-2-pyridylmethanimine, 2, N-n-lauryl-2-pyridylmethanimine, 3, and N-n-octadecyl-2-pyridylmethanimine, 4 have been used in conjunction with copper(II) bromide and azo initiators for the reverse atom transfer radical polymerisation of a range of methacrylates. AIBN to Cu^IIBr₂ ratios of 0.5:1, 0.75:1 and 1:1 give PMMA with M_n 11 500 g mol⁻¹ (PDi = 1.24) (at 22% conversion), 12 500 g mol⁻¹ (PDi = 1.06) (at 83% conversion) and 10 900 g mol⁻¹ (PDi = 1.11) (at 84% conversion), respectively. A Cu^IIBr₂ complex is demonstrated to be needed at the start of the reaction for good control over molecular weight and polydispersity as reactions using Cu(I)Br as catalyst yielded PMMA of M_n 31 000 g mol⁻¹ (PDi = 2.90), reactions with no copper yield PMMA of M_n 33 000 g mol⁻¹ (PDi = 2.95). The RATRP of styrene was carried out using Cu^IIBr₂ as catalyst. AIBN to Cu^IIBr₂ ratio of 0.5:1, 0.75:1 and 1:1 gave PS with M_n = 12 400 g mol⁻¹ (PDi = 1.27) at low conversion, M_n = 15 500 g mol⁻¹ (PDi = 1.11) and 12 400 g mol⁻¹ (PDi = 1.38), respectively at ∼85% conversion. A series of block copolymers of MMA with BMA, BzMA and DMEAMA (15 600 g mol⁻¹ (PDi = 1.18), 13 300 g mol⁻¹ (PDi = 1.14) 15 300 g mol⁻¹ (PDi) = 1.16), using a PMMA macroinitiator were prepared. Emulsion polymerisation of MMA using [initiator]:[Cu^(II)Br₂] ratio = 0.5:1 with Brij surfactant gave a linear increase of M_n with respect to conversion, final M_n = 112 800 g mol⁻¹ (PDi = 1.42). Further reactions were carried out with [initiator]:[Cu^(II)Br₂] ratio = 0.75:1 and 1:1. Both giving PMMA with M_n ∼ 32 000 g mol⁻¹ (PDi ∼ 2.4). These reactions exhibit no control, this is because the azo initiator is present in excess and all of the monomer is consumed by a free radical polymerisation as opposed to a controlled reaction. Particle size analysis (DLS) showed the particle size between 160 and170 nm in all cases.     

Synthesis and photoluminescence properties of the high-brightness Eu-doped M2Gd4(MoO4)7 (M=Li, Na) red phosphors

A series of red-emitting phosphors Eu³⁺-doped M₂Gd₄(MoO₄)₇ (M=Li, Na) have been successfully synthesized at 850 °C by solid state reaction. The excitation spectra of the two phosphors reveal two strong excitation bands at 396 nm and 466 nm, respectively, which match well with the two popular emissions from near-UV and blue light-emitting diode chips. The intensity of the emission from ⁵D₀ to ⁷F₂ of M₂(Gd_1−xEu_x)₄(MoO₄)₇ phosphors with the optimal compositions of x=0.85 for Li or x=0.70 for Na is about five times higher than that of Y₂O₃:Eu³⁺. The quantum efficiencies of the entitled phosphors excited under 396 nm and 466 nm are also investigated and compared with commercial phosphors Sr₂Si₅N₈:Eu²⁺ and Y₃A₅O₁₂:Ce³⁺. The experimental results indicate that the Eu³⁺-doped M₂Gd₄(MoO₄)₇ (M=Li, Na) phosphors are promising red-emitting phosphors pumped by near-UV and blue light.     

Electrogenerated chemiluminescence from thiol-capped CdTe quantum dots and its sensing application in aqueous solution

In this paper, the electrogenerated chemiluminescence (ECL) from thiol-capped CdTe quantum dots (QDs) was reported. The ECL emission was occurred at −1.1 V and reached a maximum value at −2.4 V when the potential was cycled between 0.0 and −2.5 V. The reduced species of CdTe QDs could react with the coreactants to produce the ECL emission. The CdTe QD concentration (6.64 × 10⁻⁷ mol L⁻¹) of ECL is lower than that (1.0 × 10⁻³ mol L⁻¹) of chemiluminescence (CL). Based on the enhancement of light emission from thiol-capped CdTe QDs by H₂O₂ in the negative electrode potential, a novel method for the determination of H₂O₂ was developed. The light intensity was linearly proportional to the concentration of H₂O₂ between 2.0 × 10⁻⁷ and 1.0 × 10⁻⁵ mol L⁻¹ with a detection limit of 6.0 × 10⁻⁸ mol L⁻¹. Compared with most of previous reports, the proposed method has higher sensitivity for the determination of H₂O₂. In addition, the ECL spectrum of thiol-capped CdTe QDs exhibited a peak at around 620 nm, which was substantially red shifted from the photoluminescence (PL) spectrum, suggesting the surface states play an important role in this ECL process.     

Binuclear ruthenium and osmium mixed-valence complexes containing fused and flexible polypyridyl bridging ligands

{Os(bpy)₂}²⁺ and {Ru(CN)₄}²⁻ mononuclear and binuclear complexes with ligands 2,3-di-(2-pyridyl)quinoxaline (dpq) and dipyrido[2,3-a:3′,2′-c]phenazine (ppb) have been prepared. For the binuclear complexes a splitting in oxidation potentials is observed consistent with the formation of mixed-valence species with comproportionation constants (K_com) ranging from 2.5 × 10⁴ to 1.8 × 10⁶. The electronic absorption spectra of the mixed-valence species reveal IVCT transitions in the near infrared region. The absorption maximum for the IVCT band ranges from 5800 to 9980 cm⁻¹ and the extinction coefficients from 80 to 6300 M⁻¹ cm⁻¹. In general the {Os(bpy)₂}²⁺ complexes show larger K_com values and more intense IVCT bands than the corresponding {Ru(CN)₄}²⁻ complexes.     

A ratiometric fluorescent probe for fluoride ion employing the excited-state intramolecular proton transfer

A ratiometric fluorescent probe 1 for fluoride ion was developed based on modulation of the excited-state intramolecular proton transfer (ESIPT) process of 2-(2′-hydroxyphenyl)benzimidazole (HPBI) through the hydroxyl group protection/deprotection reaction. The probe 1 was readily prepared by the reaction of HPBI with tert-butyldimethylsilyl chloride (TBS-Cl) and shows only fluorescence emission maximum at 360 nm. Upon treatment with fluoride in aqueous DMF solution, the TBS protective group of probe 1 was removed readily and ESIPT of the probe was switched on, which resulted in a decrease of the emission band at 360 nm and an increase of a new fluorescence peak around 454 nm. The fluorescent intensity ratio at 454 and 360 nm (I₄₅₄/I₃₆₀) increases linearly with fluoride ion concentration in the range 0.3-8.0 μmol L⁻¹ and the detection limit is 0.19 μmol L⁻¹. The proposed probe shows excellent selectivity toward fluoride ion over other common anions. The method has been successfully applied to the fluoride determination in toothpaste and tap water samples.     

Preparation, structure and photoluminescence properties of Eu and Ce-doped SrYSi4N7

Undoped and Eu²⁺ or Ce³⁺-doped SrYSi₄N₇ were synthesized by solid-state reaction method at 1400-1660 °C under nitrogen/hydrogen atmosphere. The crystal structure was refined from the X-ray powder diffraction data by the Rietveld method. SrYSi₄N₇ and EuYSi₄N₇, being isotypic with the family of compounds MYbSi₄N₇ (M=Sr, Eu, Ba) and BaYSi₄N_7, crystallize with the hexagonal symmetry: space group P6₃mc (No. 186), Z=2, a=6.0160 (1) Å, c=9.7894 (1) Å, V=306.83(3) Å³; and a=6.0123 (1) Å, c=9.7869 (1) Å, V=306.37(1) Å³, respectively. Photoluminescence properties have been studied for Sr_1−xEu_xYSi₄N₇ (x=0-1) and SrY_1−xCe_xSi₄N₇ (x=0-0.03) at room temperature. Eu²⁺-doped SrYSi₄N₇ shows a broad yellow emission band peaking around 548-570 nm, while Ce³⁺-doped SrYSi₄N₇ exhibits a blue emission band with a maximum at about 450 nm. SrYSi₄N₇:Eu²⁺ can be very well excited by 390 nm radiation, which makes this material attractive as conversion phosphor for LED lighting applications.     

A probe method for studying dibromocarbene by time resolved infrared spectroscopy

Dibromocarbene reacts with tertiary-butylisocyanide to form a ketenimine. The absolute rate constant of the reaction (k_TBI = 2.3 × 10⁹ M⁻¹ s⁻¹) was determined by laser flash photolysis techniques with UV-vis detection of the dibromocarbene-pyridine ylide. The ketenimine was detected by TRIR spectroscopy at 2040 cm⁻¹. Isocyanide trapping of carbenes to form ketenimines is proposed as a general method of studying IR silent carbenes by TRIR spectroscopy.     

The design,synthesis, and characterization of D-π-A-π-A type organic dyes as sensitizers for dye-sensitized solar cells (DSSCs)

New D-π-A-π-A type organic dyes were synthesized and characterized as sensitizers for dye-sensitized solar cells (DSSCs). These dyes showed wide absorption spectra (300–625 nm) and high molar extinction coefficients (ε_467 nm = 60,911 M⁻¹ cm⁻¹). As dye sensitizers in DSSC, the D-π-A-π-A dye having a cyanoacrylic acid as an acceptor gave the best cell performance with a short-circuit photocurrent density (J_sc) of 7.14 mA/cm², an open-circuit voltage (V_oc) of 0.62 V, and a fill factor (FF) of 0.72, corresponding to an overall conversion efficiency η of 3.19%.     

Oxidation of substituted pyridines by dimethyldioxirane: kinetics and solvent effects

The oxidation of a series of substituted pyridines by dimethyldioxirane (1) produced the expected N-oxides in quantitative yields. The second order rate constants (k₂) for the oxidation of a series of substituted pyridines (2a-g) by dimethyldioxirane were determined in dried acetone at 23 °C. An excellent correlation with Hammett sigma values was found (ρ = −2.91, r = 0.995). Kinetic studies for the oxidation of 4-trifluoromethylpyridine by 1 were carried out in the following dried solvent systems: acetone (k₂ = 0.017 M⁻¹ s⁻¹), carbon tetrachloride/acetone (7:3; k₂ = 0.014 M⁻¹ s⁻¹), acetonitrile/acetone (7:3; k₂ = 0.047 M⁻¹ s⁻¹), and methanol/acetone (7:3; k₂ = 0.68 M⁻¹ s⁻¹). Kinetic studies of the oxidation of pyridine by 1 versus mole fraction of water in acetone [k₂ = 0.78 M⁻¹ s⁻¹ (χ = 0) to k₂ = 11.1 M⁻¹ s⁻¹ (χ = 0.52)] were carried out. The results showed the reaction to be very sensitive to protic, polar solvents.     

Synthesis of a new type of dibenzopyrromethene-boron complex with near-infrared absorption property

A new type of π-extended 4-bora-3a,4a-diaza-s-indacene (BODIPY dye), bis(isoindole)-derived benzo[1,3,2]oxazaborinine 1, has been synthesized by seven-step procedure from 2-methoxybenzoic acid methyl ester. The benzannulation of the pyrrole ring and the formation of a structurally strained intramolecular B-O ring enable the dye to absorb near-infrared light at ca. 750 nm with a molecular extinction coefficient (ε) of ca 8.3 × 10⁴ M⁻¹ cm⁻¹ in THF. The absorption properties are discussed on the basis of DFT calculations. Interestingly, a film of 5,5-dihexyloxy derivative 1b, which was fabricated by a spin-coating procedure on a glass plate, exhibited a dramatic bathochromic shift of absorbance as compared to the solution, with λ_max of 922 nm.