Separation of positional isomers on polymeric calix[4]arene-siloxane stationary phases in capillary GC

Summary Poly(p-tert-butyldimethoxydipropyloxycalix[4]arene-tetramethyldisiloxane) (TBCX-TMDS) and poly(dimethoxydipropyloxycalix[4]arene-tetramethyl-disiloxane) (CX-TMDS), have been prepared and used as stationary phases for isothermal capillary gas chromatographic separations of positional isomers. Retention factors and separation factors for the isomers were measured. The isomers investigated were well-resolved on the two phases. Retention of all the solutes investigated is greater on TBCX-TMDS than on CX-TMDS, probably because of extra dispersive interactions of the solutes with thetert-butyl groups of the phase. Separation factors for closely-eluting isomer pairs are similar on the two phases. This seems to indicate either that the solutes are retained by non-inclusion processes or that if the isomer molecules do enter the cavity of the calixarene, i.e. the solute is retained by inclusion, thetert-butyl groups do not play a role in discriminating between the isomers.     

Liquid chromatographic behavior of two alanine‐substituted calix[4]arene‐bonded silica gel stationary phases

Two new kinds of alanine‐substituted calix[4]arene stationary phases of 5,11,17,23‐p‐tert‐butyl‐25,27‐bis(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐26,28‐dihyroxycalix[4]arene‐bonded silica gel stationary phase (BABS4) and 5, 11, 17, 23‐p‐tert‐butyl‐25,26,27,28‐tetra(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐calix[4]arene‐bonded silica gel stationary phase (TABS4) were prepared and characterized in the present study. They were compared with each other and investigated in terms of their chromatographic performance by using polycyclic aromatic hydrocarbons, disubstituted benzene isomers, and mono‐substituted benzenes as solute probes. The results indicated that both BABS4 and TABS4 exhibited multiple interactions with analytes. In addition, the commonly used Tanaka characterization protocol for the evaluation of commercially available stationary phases was applied to evaluate the properties of these two new functionalized calixarene stationary phases. The Tanaka test results were compared with Zorbax Eclipse XDB C₁₈ and Kromasil phenyl columns, respectively. BABS4 has stronger hydrogen‐bonding capacity and ion‐exchange capacity than TABS4, and features weaker hydrophobicity and hydrophobic selectivity. Both of them behave similarly in stereoselectivity. Both BABS4 and TABS4 are weaker than C₁₈ and phenyl stationary phases in hydrophobicity and hydrophobic selectivity.     

Preparation and evaluation of a deoxycholic‐calix[4]arene hybrid‐type receptor as a chiral stationary phase for HPLC

We report the synthesis and enantioseparation characteristics of two novel covalently immobilized deoxycholic acid derivatives as chiral stationary phases for high‐performance liquid chromatography. In the structure of the first stationary phase, the 3‐position of deoxycholic acid is substituted with a 3,5‐dinitrophenylcarbamoyl group and the second one has an additional calix[4]arene attached to the carboxylic group of the deoxycholic acid. The chromatographic performance of the stationary phases was evaluated with enantioseparation of N‐(3,5‐dinitrobenzoyl)‐dl ‐leucine, N‐(3,5‐dinitrobenzoyl)‐dl ‐valine, omeprazole, diclofop‐methyl, dl ‐mandelic acid and (RS)‐pregabalin. Comparison of the performance characteristics of the prepared chiral stationary phases provided evidence for the active involvement of the calix[4]arene unit in the chiral recognition process. Both stationary phases are chemically bonded to the silica and can be used in both normal‐phase and reversed‐phase modes.     

Polycyclic aromatic hydrocarbons as test probes to investigate the retention behavior of 1,3‐alternate calix[4]arene silica‐bonded stationary phases

A series of polycyclic aromatic hydrocarbons (PAHs) of different size and shape has been used to characterize the chromatographic behavior of five calix[4]arene stationary phases in 1,3‐alternate conformation synthesized in our laboratory. The selection of linear, four‐ring nonlinear, and five‐ring PAHs gave data on selectivity changes across range of the calix[4]arene columns. Retention of the 12 aromatic solutes has been evaluated at various methanol contents in the mobile phase (70–100% v/v) and column temperatures (20–45°C). The thermodynamic parameters underlying the retention mechanisms revealed that each of the five calix[4]arene columns exhibited variation in selectivity and retention of PAHs caused by enthalpy and entropy effects. The calixarene stationary phases substituted with electron‐withdrawing groups exhibit enhanced selectivity toward PAHs in comparison to the rest of the investigated columns. The observed divergences are due to differences in solute–stationary phase interactions and originate in π–π and π‐electron transfer specific to the analytes and the type of calix[4]arene functionalization at the upper rim, as well as steric and sorption phenomena.     

A phenanthrene-based calix[4]arene as a fluorescent sensor for Cu and F

A new phenanthrene-based fluorescent calix[4]arene (4) has been synthesized in cone conformation. This compound was examined for its fluorescent properties towards different metal ions (Na⁺, Li⁺, Mg²⁺, Ni²⁺, Ba²⁺, Ca²⁺, Cu²⁺, Pb²⁺) and anions (F⁻, Cl⁻, Br⁻, H₂₄PO⁻,${{\text{H}}_2{\text{PO}}_4}^{-}\text{,}$₃NO⁻,${{\text{NO}}_3}^{-}\text{,}$₄HSO⁻,${{\text{HSO}}_4}^{-}\text{,}$ CH₃COO⁻) by fluorescence spectroscopy. The properties of the compound were evaluated and show that it is a fluorescence sensor for Cu²⁺ and F⁻. With the addition of Cu²⁺ and F⁻, the fluorescence was severely quenched.     

苄基和酯基杯[4]芳烃聚硅氧烷固定液热力学性质和分离机理

合成了两种新型杯芳烃衍生物苄基杯［4］芳烃聚硅氧烷（C［4］TECM-PSO）和酯基杯［4］芳烃聚硅氧烷,并用作毛细管气相色谱固定液。通过测定6组芳香族化合物在两种固定液上的热力学参数ΔH、ΔS、ΔG、ΔS/ΔH、Δ(ΔH)、Δ(ΔS),探讨了它们对于所测化合物的分子识别和色谱分离机理。结果显示,酯基杯［4］芳烃上测得的ΔH、ΔS远高于苄基杯芳烃上所测得的热力学参数,表明其与溶质的作用力强,构型效应更明显。同时对两种杯［4］芳烃的包结作用进行了探讨。     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

酰胺型杯[4]聚硅氧烷用作气相色谱固定相的研究

将合成的两种酰胺型杯「４」聚硅氧烷（ＰＳＯ－Ｃ「４」Ａ和Ｍ－Ｃ「４」Ａ－ＰＳＯ）用作毛细管柱气相色谱固定液,考察了产的色谱特性,柱效、极性及选择性,相变温度和稳定性。结果表明,两种酰胺型杯「４」聚硅氧烷固定液具有优良的色谱性能、多环芳主一些芳香族位置异构体得到较好的分离。     

Synthesis of calix[4]arene alkylamine derivatives as new phase-transfer catalysts for esterification reaction

This study reports the synthesis of calix[4]arene-based phase-transfer catalysts derived from the reaction of 5,17-di-tert-butyl-25,27,26,28-tetrahydroxycalix[4]arene with N-ethylpiperazine, diallylamine or 4-benzylpiperidine. The catalytic efficiency of the calix[4]arenes alkylamine derivatives was evaluated by carrying out the ester-forming reaction of alkali metal carboxylates (sodium butyrate or sodium caprylate) with p-nitrobenzyl bromide. It has been observed that the ester-forming reaction of alkali metal carboxylates with p-nitrobenzyl bromide, using the N-ethylpiperazine amine derivative of calix[4]arene as a phase-transfer catalyst in dichloromethane at 25 °C, provided the best yields.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Comparative study of calix[4]arene derivatives: implications for ligand design

The first comparative theoretical study of three parent calix[4]arene analogues (calix[4]arene, thiacalix[4]arene, and homooxacalix[4]arene) has been performed using molecular dynamic simulations and density functional theory (MPWB1K/6-311G^∗∗//B3LYP/6-311G^∗∗) methods. The theoretical observations herein including optimized geometry, polarity, and atomic charge data provide that homooxacalix[4]arene would offer more efficient platform for metal ion recognition compared to thiacalix[4]arene or calix[4]arene.     

单炔基桥联双杯[4]芳烃的合成与对溶剂分子的包合性能

对叔丁基杯[4]芳烃直接与1,4-二氯-2-丁炔反应,一步制备了单炔基单桥联双杯[4]芳烃和单炔基双桥联双杯[4]芳烃,并证实单桥联双杯[4]芳烃是双桥联双杯[4]芳烃的中间产物.经¹HNMR,¹³CNMR和ESI-MS分析证实了产物的结构.ESI-MS结果表明两种产物对DMF和H₂O有不同的包合能力.     

A novel calix[4]arene fluorescent receptor for selective recognition of acetate anion

A novel bridged fluorescent calix[4]arene with 1,8-diaminoanthracene and glycine at the upper rim has been prepared, which exhibited selective recognition towards AcO⁻ over other anions such as F⁻, Cl⁻, Br⁻, , , I⁻ and by fluorescence spectroscopy and ¹H NMR method.     

Synthesis and ESR behaviors of nitroxide monoradical based on calix[4]arene

A novel paramagnetic calix[4]arene 6 with an N-O monoradical on the upper rim was synthesized and studied by ESR spectroscopy. Its ESR behaviors were mainly induced by its intrinsic conformational flexibility. The effects of varying temperature and complexation of silver ions on its ESR behaviors were also investigated.     

Polymeric membrane sodium-selective electrodes based on calix[4]arene ionophores

Six kinds of tetra alkylester type calix[4]arene derivatives, (R₁=R₂=CH₃1, C₂H₅2, C₃H₇3,n-C₄H₉4,t-C₄H₉5,n-C₁₀H₂₁6), a diethyl-didecyl mixed ester type (R₁=C₂H₅, R₂ =C₁₀H₂₁7), and three kinds of lower rim bridged types (R₁=C₂H₅, R₂–R₂=(CH₂)₁₀8, (CH₂)₁₂9, (CH₂)₂(OCH₂CH₂)₃10) were characterized by electrochemical measurement to elucidate the effect of the length of the alkyl group of alkoxycarbonyl substituents on Na⁺ selectivity. To obtain excellent Na⁺ selective ionophores, introduction of short chain alkyl groups rather than long chain ones, such as a decyl group, and maintenance of sufficient solubility of the calix[4]arene derivatives in the membrane solvent are required concurrently. Among the calix[4]arenes tested, 25,26,27,28-tetrakis[(ethoxycarbonyl)methoxy]-p-tert-butylcalix[4]arene2, and the diethyl-didecyl mixed ester type derivative7 are the best ionophores for a Na⁺ selective electrode. On the other hand, sodium selectivity of the bridged type derivative9 is comparable or even superior to that of the known bis(12-crown-4).This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

Synthesis and fluorescence sensing properties of novel pyrene-armed calix[4]arene derivatives

Fluorogenic tert-butylcalix[4]arenes bearing two pyrene pendant groups at the lower rim were synthesized. Based on ratiometric changes of monomer and excimer emissions, the pyrene amine derivative of calix[4]arene has been found to act as a selective sensor for Pb²⁺ and Cu²⁺ ions, respectively, due to a conformational change upon chelation of these ions.     

Preparation and gas chromatographic characterization of dibenzyl crown ether stationary phases

Summary Two crown ethers, di(tert-butylbenzo)-propyl-15-crown-5 polysiloxane (PSO-DTB-15C5) and dibenzo-propyl-15-crown-5 polysiloxane (PSO-DB-15C5) have been synthesized and coated onto fused-silica capillary columns. The chromatographic characteristics, including column efficiency, polarity, phase transition temperature, operating temperature range and selectivity, were studied.Excellent selectivity was obtained for the separation of polar position isomers, especially phenol and dinitrotoluene isomers. The separation mechanism is discussed.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.