Electrochemical detection of dihydromyricetin using a DNA immobilized ethylenediamine/polyglutamic modified electrode

A novel voltammetric sensor, based on DNA immobilized on the surface of an ethylenediamine/polyglutamic (En/PGA) modified glassy carbon electrode (GCE), was constructed and used for determination of dihydromyricetin (DMY). The electrochemical behaviour of DMY at this sensor was investigated in pH 3.6 NaAc-HAc buffer solutions by cyclic voltammetry (CV) and differential pulse anodic voltammetry (DPV). The oxidation of DMY is an adsorption-controlled irreversible process. The oxidation mechanism was proposed and discussed. It was found that the modified electrode exhibited a linear voltammetric response for DMY in the range of 4.0 × 10(-8) mol L(-1) to 2 × 10(-6) mol L(-1), with a detection limit of 2 × 10(-8) mol L(-1). The method was also applied successfully to detect DMY in an ampelopsis sample with satisfactory results.     

基于壳聚糖/Ru（bpy）2+3/SiO2纳米粒子电化学发光传感器用于尿酸的检测

利用反相微乳液法制备了壳聚糖-Ru(bpy)2+3-SiO2复合纳米粒子,采用Nafion/MCNT复合膜技术实现了对复合纳米粒子有效而稳定的固定,从而制备了电化学发光传感器,实现了对尿酸的检测。在0.1 mol/L PBS缓冲溶液(pH 7.4)中,当尿酸与修饰电极作用15 min时,电化学发光强度与尿酸浓度(1.0×10-10~1.0×10-5 mol/L)的负对数呈良好的线性关系,线性方程为IECL=-709.52-202.74lgC,相关系数R=0.9936,检出限为6.0×10-12 mol/L。传感器表现出良好的重现性与稳定性,对1.0×10-8 mol/L尿酸平行测定11次,发光强度的相对标准偏差为2.9%,测定尿酸实际样品的加标回收率在98.5%~103.5%之间。     

基于表面活性剂单分子层修饰碳糊电极的一氧化氮电化学传感器及其应用

报道了一种表面活性剂单分子层修饰碳糊电极,并用于NO的高灵敏电化学检测。研究表明,表面活性剂通过烷基链在电极表面形成的疏水性单分子层微环境对NO的电化学响应具有较好的促进作用。其中,阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)对NO的电化学氧化表现出最强的催化活性和增敏作用。在Nafion膜覆盖的CTAB修饰碳糊电极上,NO的安培响应与其浓度在3.6×10-8～1.8×10-5mol/L范围内呈良好的线性关系,检出限为1.8×10-8mol/L。该电极作为低成本、高灵敏的NO电化学传感器,被成功应用于大鼠肺组织细胞中NO释放的实时监测。     

NO2-在CTMAB-氧化钕纳米修饰电极上的电化学行为及其测定

制备了十六烷基三甲基溴化铵-氧化钕纳米修饰电极。用循环伏安法和示差脉冲伏安法研究了NO2-在该修饰电极上的电化学行为,结果表明,该修饰电极对NO2-的氧化具有良好的电催化能力,NO2-的氧化峰电流与其浓度在3.33×10-8～1.04×10-6mol/L范围内呈现良好的线性关系,检测限为9.86×10-9mol/L(S/N=3)。此外,该修饰电极具有良好的重现性和稳定性。本方法可用于NO2-实际样品的测定。     

纳米金/石墨烯修饰电极的制备及其对多巴胺的测定

利用电化学还原方法制备纳米金/石墨烯修饰玻碳电极,研究了多巴胺(DA)在该修饰电极上的电化学行为,建立了电化学测定多巴胺的新方法。结果表明,在磷酸盐缓冲溶液中,此修饰电极对多巴胺的电化学响应具有很好的催化作用。利用差示脉冲伏安技术对多巴胺的电化学氧化进行定量分析,多巴胺的氧化峰电流与其浓度在1.0×10-7～1.0×10-5mol/L范围内呈良好的线性关系,检测限低至4.0×10-8mol/L。该修饰电极适于多巴胺的分析检测。     

分子印迹电化学传感器检测水杨酸

以水杨酸(SA)为模板分子,邻苯二胺(o-PPD)及吡咯(Py)为复合功能单体,在石墨烯修饰的玻碳电极表面制备分子印迹电化学传感器(MIP/GO/GCE),用扫描电镜(SEM)观察印迹膜的表面形貌,方波伏安法(SWV)和循环伏安法(CV)对分子印迹传感器的性能进行表征。通过优化实验条件,显示SA浓度在1.0×10-8~1.0×10-2 mol/L范围内,分子印迹传感器峰电流与SA浓度负对数具有良好的线性关系,检出限为8.6×10-9 mol/L。该传感器对SA具有良好的选择性,样品回收率为101%~106%,相对标准偏差(RSD)为3.8%。SA分子印迹传感器的制备简单、抗干扰性好、灵敏度高、成本低廉,具有较好实用价值。     

双酚A在氮掺杂多壁碳纳米管修饰电极上的电化学行为及测定

构建了不同百分含量的氮掺杂的多壁碳纳米管化学修饰石墨电极,利用线性扫描伏安法及循环伏安法研究了双酚A(BPA)在修饰电极上的电化学行为。提出了一种灵敏、简便的直接检测双酚A的电化学分析方法。在pH6.98的PBS缓冲溶液中,在电位0.20 V富集后,该修饰电极在0.680 V出现一个灵敏的、峰形好的氧化峰。表明氮掺杂多壁碳纳米管薄膜对双酚A的氧化表现出一定的催化作用,能显著提高双酚A的氧化峰电流。在优化条件下,采用线性扫描伏安法对双酚A进行测定。双酚A的氧化峰电流与其浓度在2.5×10-7～1.0×10-4 mol/L之间有很好的线性关系(R为0.996),检出限为5.0×10-8mol/L。电极已初步用于实际样品中BPA的测定。     

Sensitive detection of esculetin based on a CdSe nanoparticles-decorated poly(diallyldimethylammonium chloride)-functionalized graphene nanocomposite film

An electrochemical sensor based on a CdSe nanoparticles (NPs)-decorated poly(diallyldimethylammonium chloride) (PDDA)-functionalized graphene (CdSe-PDDA-G) nanocomposite was fabricated for the sensitive detection of esculetin. The nanocomposite was characterized by X-ray diffraction (XRD), ultraviolet/visible spectra (UV-vis) and transmission electron microscopy (TEM). Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to investigate the electrochemical behaviors of esculetin on the CdSe-PDDA-G composite film-modified glassy carbon electrode (GCE). The experimental results indicated that the incorporation of CdSe NPs with PDDA-G greatly enhanced the electrochemical response of esculetin. This electrochemical sensor displayed satisfactory analytical performance for esculetin detection over a range from 1.0 × 10(-8) to 5.0 × 10(-5) mol L(-1) with a detection limit of 4.0 × 10(-9) mol L(-1) (S/N = 3). Moreover, the sensor also exhibited good reproducibility and stability, and could be used for the detection of esculetin in real samples with satisfactory results.     

石墨烯修饰玻碳电极测定邻苯二酚

制备了用于测定邻苯二酚(CAT)的石墨烯修饰电极,并应用循环伏安法研究了CAT在该修饰电极上的电化学行为;用差分脉冲伏安法研究了测试底液的pH值对该修饰电极性能的影响,结果表明,此修饰电极在含不同浓度CAT的PBS溶液(pH=7.0)中测定,响应电流与CAT浓度在5.0×10-8～5.6×10-4mol/L范围内有良好的线性关系,相关系数r=0.9919,检出限为6.68×10-9mol/L(S/N=3)。与其它几种修饰电极相比,石墨烯修饰电极制备简单、响应时间快、操作简便,稳定性和重现性良好,有应用价值。     

聚4-(2-吡啶偶氮)间苯二酚膜修饰玻碳电极测定过氧化氢

利用循环伏安法（-0.5～2.2 V）将4-(2-吡啶偶氮)间苯二酚(PAR)电聚合修饰到玻碳电极表面,制备了聚PAR膜过氧化氢（H2O2）传感器。 并采用循环伏安法和计时安培法研究了修饰电极的电化学性质和对H2O2的响应特性。 结果表明,PAR膜修饰电极在低的电位下对H2O2具有优异的电催化还原效应。 在磷酸盐缓冲溶液中(pH=8.0)用计时安培法对H2O2进行了测定（工作电位0.45 V）,响应电流与其浓度在2×10-5～1.76×10-3 mol/L范围内呈良好的线性关系,线性相关系数r=-0.999 83,检测限(S/N=3)为3 μmol/L。该修饰电极灵敏度高、稳定性好、制备简单,在H2O2的测定中对抗坏血酸、尿酸和葡萄糖有较好的抗干扰性。     

多壁纳米碳管/二氧化硅复合膜中的联吡啶钌电化学发光法测定氧氟沙星的研究与应用

基于氧氟沙星对联吡啶钌(Ru(bpy)_3~(2+))电化学发光的增敏作用,建立了一种以多壁纳米碳管(MWCNTs)/二氧化硅-联吡啶钌复合物修饰的玻碳电极电化学发光检测氧氟沙星的新方法.利用溶胶-凝胶(sol-gel)固定化稳定的优点和纳米碳管的电催化作用,提高了传感器的电流响应.在最佳实验条件下,氧氟沙星浓度在4.0×10~(-6) ～1.0×10~(-4) mol/L范围内与相对发光强度呈线性关系(r~2=0.994 8),检出限(S/N=3)为2.0×10~(-6) mol/L.连续平行测定2.4×10~(-5) mol/L的氧氟沙星溶液 5次,发光强度的RSD为1.8%.     

Sensitive voltammetric determination of tryptophan using an acetylene black paste electrode modified with a Schiff's base derivative of chitosan

Chitosan was modified by salicylaldehyde via Schiff's base reaction and the resulting product was modified on the surface of an acetylene black paste electrode (ABPE) by the drop-coating method. In 0.5 mol L(-1) acetate buffer (pH 4.2), a substantial increase in the anodic stripping peak current of tryptophan (Trp) (compared to conventional bare carbon paste electrode (CPE) and bare ABPE) is observed at the Schiff's base chitosan-modified electrode. The parameters influencing voltammetric determination of Trp have been optimized. Under the selected conditions, the linearity between the anodic peak currents and concentrations of Trp demonstrated a wide range of 6.0 × 10(-8) mol L(-1) to 2.0 × 10(-6) mol L(-1), 2.0 × 10(-6) mol L(-1) to 4.0 × 10(-5) mol L(-1) and 4.0 × 10(-5) mol L(-1) to 1.0 × 10(-4) mol L(-1), a low detection limit of 2.0 × 10(-9) mol L(-1) was obtained after a 60 s accumulation. In addition, the developed electrochemical sensor has been successfully applied for the determination of Trp in pharmaceutical and biological samples with satisfactory assay results.     

基于聚酰胺-胺功能化碳纳米管负载钯纳米粒子的过氧化氢传感器

采用电化学法将钯纳米粒子(PdNPs)沉积在第四代聚酰胺-胺树状大分子(G4.0 PAMAM)功能化碳纳米管(MWCNTs)复合材料(G4.0-MWCNTs)修饰的玻碳电极表面,构建了一种新型过氧化氢(H2O2)传感器。采用场发射扫描电镜、循环伏安法和电化学阻抗谱对修饰电极进行表征,结果表明,大量高分散的PdNPs沉积在G4.0-MWCNTs修饰的电极上,修饰电极对H2 O2还原具有优异的电催化性能。在优化条件下,H2 O2浓度在1.0×10-9~1.0×10-3 mol/L范围内与电流响应呈线性关系,检出限为3×10-10 mol/L (S/N=3),测定血清实样加标回收率在96.7％~103.1％之间。     

抗坏血酸在聚槲皮素修饰电极上的电化学行为

采用电聚合方法制备了一种新的聚槲皮素(PQu)修饰电极,并用循环伏安法研究了该电极的电化学行为。在pH=4.0的B-R缓冲溶液中有一对准可逆的氧化还原峰,实验表明聚槲皮素电极过程是2电子2质子的可逆反应。该膜对抗坏血酸有良好的电催化作用,氧化峰电流与抗坏血酸浓度在4.76×10-6~1.0×10-4mol/L范围内呈良好的线性关系,检出限达1.5×10-6mol/L。尿酸不干扰抗坏血酸的测定。     

盐酸普萘洛尔分子印迹电化学传感器的制备与研究

以盐酸普萘洛尔为目标模板分子,通过电聚合多巴胺,在多壁碳纳米管修饰的玻碳电极表面制备了对目标分子有特异响应的分子印迹电化学传感器.利用扫描电子显微镜、循环伏安法和差示脉冲伏安法对此传感器的表面形貌及性能进行了表征,并且优化了检测条件,研究了印迹传感器对模板分子及其结构类似物的选择性响应.结果表明:此传感器具有较好的选择性响应,而且碳纳米管的存在显著提高了传感器的灵敏度.盐酸普萘洛尔的浓度在0.20～100 μmol/L范围内与峰电流呈良好的线性关系;检出限为2.53×10-8 mol/L(S/N=3).此传感器还具有良好的稳定性和重现性.     

聚氨基黑10B/Nafion修饰电极上多巴胺的检测

用电化学聚合法制备了聚氨基黑10B/Nafion修饰电极,利用循环伏安法研究了多巴胺在此修饰电极上的电化学行为.在磷酸盐缓冲溶液(pH 6.0)中,多巴胺在修饰电极上呈现可逆的氧化还原峰.其峰电位都随pH值的增加而负移.多巴胺氧化还原峰电流与其浓度在0.2～30 μmol/L范围内呈良好的线性关系;检出限为1.0×10~7 mol/L.实验结果表明:本修饰电极具有良好的重现性、稳定性和较强的抗干扰能力.将此修饰电极用于多巴胺注射液和小牛血清中多巴胺的检测,结果令人满意.     

Enhanced electrochemiluminescence employed for the selective detection of methyl parathion based on a zirconia nanoparticle film modified electrode

A simple, rapid and sensitive electrochemiluminescence (ECL) sensor was proposed for direct measurements of methyl parathion (MP) based on the strong affinity of a nano zirconia particles (ZrO(2) NPs) modified film on the electrode to the phosphoric group. ZrO(2) NPs, which could provide a larger absorption area to immobilize organophosphorus, was firstly modified on the glassy carbon electrode surface to prepare the proposed ECL sensor (ZrO(2)/GC). Subsequently, the ZrO(2)/GC electrode was scanned from -0.8 to +0.6 V to obtain the background signal at 0.44 V in a luminol/KCl solution. Then, a certain concentration of MP was added to an aqueous solution for 240 s, which was absorbed onto the ZrO(2)/GC electrode surface. Moreover, the MP absorbed on the surface of the ZrO(2)/GC electrode enhanced the ECL signal of luminol in the luminol/KCl solution, which increased with the concentration of MP. As a result, a novel ECL sensor was obtained in a luminol/KCl solution. The MP was determined in the range of from 3.8 × 10(-11) to 3.8 × 10(-6) mol L(-1), with a low detection limit of 1.27 × 10(-11) mol L(-1) (S/N = 3). The proposed ECL sensor performance for MP detection will open a new field in the application of rapid and screen detection of ultra-trace amounts of organ phosphorus pesticides (OPs) of vegetables used in farm markets.     

Iodide-selective polymeric membrane electrode based on copper(Ⅱ) bis(N-2-bromophenylsalicyldenaminato) complex

A PVC membrane electrode based on copper（Ⅱ） bis（N-2-bromophenylsalicyldenaminato） as ionophor was prepared.The ion selective electrode was tested by inorganic anions and showed a good selectivity for iodide ion.This sensor exhibited Nernstian behavior with a slope of—57.8 mV per decade at 25℃.The proposed electrode showed a linear range from 1.0×10⁵ to 1.0×10^-1 mol/L with a detection limit of 5.0×10^-6 mol/L.The electrode response was independent of pH in the range of 3.0- 10.0.The proposed sensor was applied to determine the iodide in water and antiseptic samples.     

Comparative electrochemical study of new self-assembled monolayers of 2-{[(Z)-1-(3-furyl)methylidene]amino}-1-benzenethiol and 2-{[(2-sulfanylphenyl)imino]methyl}phenol for determination of dopamine in the presence of high concentration of ascorbic acid and uric acid

The comparative electrochemical behavior of self-assembled monolayers of two Schiff's bases, 2-{[(Z)-1-(3-furyl)methylidene]amino}-1-benzenethiol (FMAB) and 2-{[(2-sulfanylphenyl)imino]methyl}phenol (SIMP) on a bare gold electrode (Au FMAB SAM-modified electrode and Au SIMP SAM-modified electrode, respectively), was investigated by means of cyclic voltammetry and electrochemical impedance spectroscopy in a 0.1 mol L(-1) KCl solution that contains 5.0 × 10(-3) mol L(-1) [Fe(CN)(6)](3-/4-). The results revealed that the modified electrodes showed an electrocatalytic activity toward the anodic oxidation of dopamine by a marked enhancement in the current response and lower overpotential (60 and 90 mV for the Au FMAB and Au SIMP SAM-modified electrodes, respectively) in phosphate buffer solution at pH 6.0. The Au SIMP SAM-modified electrode was applied successfully to the determination of dopamine in the presence of a high concentration of ascorbic acid. Selective detection was realized in total elimination of ascorbic acid response-a method different from the ones based on the potential separations. The detection limit of dopamine was 5.0 × 10(-8) mol L(-1) in a linear range from 1.0 × 10(-6) to 1.2 × 10(-4) mol L(-1) in the presence of 1.0 × 10(-3) mol L(-1) ascorbic acid. The interference studies also showed that the Au SIMP SAM-modified electrode exhibited good selectivity in the presence of a large excess of uric acid and could be employed for the determination of dopamine in pharmaceutical formulations, plasma samples and human urine with adequate selectivity and precision.     

Electrocatalytic Oxidation and Ion Chromatography Detection of S2O32-, SO32-, I- and SCN- at Glassy Carbon Electrode with Functionalized Multi-Wall Carbon Nanotubes Film

In this research, a glassy carbon electrode modified with the functionalized multi-wall carbon nanotubes (MWNT-COOHs) film was used as an amperometric sensor for the determination of S2O32-, SO23-, I- and SCN-. The electrochemical behavior of those oxidizable inorganic anions at this modified electrode was studied by means of cyclic voltammetry(CV). The experimental results indicate that the modified electrode exhibits a high electrocatalytic activity towards the oxidation of those anions with a relatively high sensitivity, a good stability and a long-life. Separated by ion chromatography(IC) with 1.25 mmol/L H2SO4 as an eluent,those oxidizable anions can be determined by the MWNT-COOHs modified electrode successfully. Under the optimal chromatographic conditions, the detection limits are 1.5 × 10-7 mol/L for S2O23-, 2. 5 × 10-7 mol/L for SO32-, 1.2 × 10-7 mol/L for I- and 2. 0 × 10-7 mol/L for SCN-, respectively. The method was applied successfully to the determination of those anions in environmental water.