Accurate van der Waals force field for gas adsorption in porous materials

An accurate van der Waals force field (VDW FF) was derived from highly precise quantum mechanical (QM) calculations. Small molecular clusters were used to explore van der Waals interactions between gas molecules and porous materials. The parameters of the accurate van der Waals force field were determined by QM calculations. To validate the force field, the prediction results from the VDW FF were compared with standard FFs, such as UFF, Dreiding, Pcff, and Compass. The results from the VDW FF were in excellent agreement with the experimental measurements. This force field can be applied to the prediction of the gas density (H₂, CO₂, C₂H₄, CH₄, N₂, O₂) and adsorption performance inside porous materials, such as covalent organic frameworks (COFs), zeolites and metal organic frameworks (MOFs), consisting of H, B, N, C, O, S, Si, Al, Zn, Mg, Ni, and Co. This work provides a solid basis for studying gas adsorption in porous materials. © 2017 Wiley Periodicals, Inc.     

Direct Measurement of Repulsive van der Waals Interactions Using an Atomic Force Microscope

The forces of interaction between a flat poly(tetrafluoroethylene) (PTFE) surface and gold spheres (of radii 3–8 μm) were measured as a function of apparent surface separation for different intervening media. For air, fluorinated alkanes, and polar liquids the interaction between the surfaces was found to be attractive. With intervening liquids of low-polarity the interaction was found to be repulsive. This repulsion is attributed to a negative composite Hamaker coefficient leading to van der Waals repulsion.     

Lennard-Jones parameters for small diameter carbon nanotubes and water for molecular mechanics simulations from van der Waals density functional calculations

Lennard-Jones (LJ) parameters are derived for classical nonpolarizable force fields for carbon nanotubes (CNTs) and for CNT-water interaction from van der Waals (vdW) enhanced density functional calculations. The new LJ parameters for carbon-carbon interactions are of the same order as those previously used in the literature but differ significantly for CNT-water interactions. This may partially originate from the fact that in addition to pure vdW interactions the polarization and other quantum mechanics effects are embedded into the LJ-potential.     

Prediction of physicochemical properties of organic molecules using van der Waals surface electrostatic potentials

The generalized interaction properties function (GIPF) methodology developed by Politzer and coworkers, which calculated molecular surface electrostatic potential (MSESP) on a density envelope surface, was modified by calculating the MSESP on a much simpler van der Waals (vdW) surface of a molecule. In this work, vdW molecular surfaces were obtained from the fully optimized structures confirmed by frequency calculations at B3LYP/6-31G(d) level of theory. Multiple linear regressions for normal boiling point, heats of vaporization, heats of sublimation, heats of fusion, liquid density, and solid density were performed using GIPF variables from vdW model surface. Results from our model are compared with those from Politzer and coworkers. The surface-dependent beta (and gamma) values are dependent on the surface models but the surface-independent alpha and regression coefficients (r) are constant when vdW surface and density surface with 0.001 a.u. contour value are compared. This interesting phenomenon is explained by linear dependencies of GIPF variables.     

晶体中原子的平均范德华半径

根据晶体中原子的平均体积数据提出包括全部金属元素的原子平均范德华半径值.与现有几个重要的范德华半径体系进行了初步的比较,指出范德华半径值在应用中值得注意的问题,简要提出了有关范德华半径今后研究的方向.     

晶体范德华半径的70年

对过去70年来发表的稀有气体、非金属元素和金属元素的晶体范德华半径重要数值进行了系统分析和总结.从常用的数值中推荐了最可靠值,并指出有关晶体范德华半径值及其应用中的若干问题,以及有待今后进一步研究的方向.     

Van der Waals radii of metals from spectroscopic data

The lack of information about the van der Waals radii of metals can be compensated for by using the results of spectroscopic investigations of van der Waals molecules. It has been shown that the interatomic distances in these molecules obey an additive scheme if one allows for the polarization effects. The van der Waals radii of the alkali metals, Ag, Mg, Zn, Cd, Hg, B, Al, In, and Si, have been determined from the interatomic distances in their heteroatomic molecules with atoms of noble gases. Use of the obtained radii for crystal chemistry is discussed.Translated fromIzyestiya Akademil Nauk. Seriya Khimicheskaya, No. 8, pp. 1374–1378, August, 1994.     

Calculation of the van der Waals volumes of organic molecules

A new and more precise method is proposed for calculating van der Waals atomic and molecular volumes of organic compounds. The method provides for intersections of three or more spheres at one point of space. Such a possibility is essential for calculating the volumes of sterically overcrowded molecules and of molecules with intramolecular hydrogen bonds. A computer program for IBM PC/AT(XT) is developed. Depending on the atomic environment in the molecule, the average values of the volume increments for atoms C, N, O, H, F, Cl, and S are obtained using the data from the Cambridge Structural Database.N. S. Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences, Moscow 117071. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 922–931, April, 1992.     

Novel van der Waals Deep-UV Nonlinear Optical Materials

Van der Waals (vdW) deep-UV (DUV) nonlinear optical (NLO) crystal is an important material system recently developed. Herein, we review its concept and original intention, and then summarized the discovery process of related materials, including the role of A-site cations and the resulting two-/one-dimensional vdW DUV NLO systems. Finally, we evaluate the practical DUV NLO performance and prospected the opportunities and challenges.     

Augmented van der Waals equations of state: SAFT-VR versus Yukawa based van der Waals equation

Performance of the SAFT-VR equation of state developed for the hard sphere based simple fluids, namely the square-well, Sutherland and Yukawa fluids, is examined by comparing its results with simulation data and an augmented van der Waals (vdW) equation based on a Yukawa (Y) reference. Its shown that both for the equilibrium vapor-liquid data and data along selected isotherms in the liquid and supercritical fluid phases the vdW(Y) equation provides better results, particularly when going to lower temperatures.     

Phosphorene-Based van der Waals Heterojunction for Solar Water Splitting

As a clean and renewable future energy source, hydrogen fuel can be produced via solar water splitting. Two-dimensional (2D) black phosphorene (black-P) can harvest visible light due to the desirable band gap, which promises it as a metal-free photocatalyst. However, black-P can be only used to produce hydrogen since the oxidation potential of water locates lower than the position of the valence band maximum. To improve the photocatalytic performance of black-P, here, using black-P and blue phosphorene (blue-P) monolayers, we propose a 2D van der Waals (vdW) heterojunction. Theoretical results, including the band structures, density of states, Bader charge population, charge density di erence, and optical absorption spectra, clearly reveal that the visible light absorption ability is obviously improved, and the band edge alignment of the proposed vdW heterojunction displays a typical type-II feature to effectively separate the photogenerated carriers. At the same time, the built-in interfacialelectric field prevents the electron-hole recombination. These predictions suggest that the examined phosphorene-based vdW heterojunction is an efficient photocatalyst for solar water splitting.     

Accurate description of van der Waals complexes by density functional theory including empirical corrections

An empirical method to account for van der Waals interactions in practical calculations with the density functional theory (termed DFT-D) is tested for a wide variety of molecular complexes. As in previous schemes, the dispersive energy is described by damped interatomic potentials of the form C6R(-6). The use of pure, gradient-corrected density functionals (BLYP and PBE), together with the resolution-of-the-identity (RI) approximation for the Coulomb operator, allows very efficient computations for large systems. Opposed to previous work, extended AO basis sets of polarized TZV or QZV quality are employed, which reduces the basis set superposition error to a negligible extend. By using a global scaling factor for the atomic C6 coefficients, the functional dependence of the results could be strongly reduced. The "double counting" of correlation effects for strongly bound complexes is found to be insignificant if steep damping functions are employed. The method is applied to a total of 29 complexes of atoms and small molecules (Ne, CH4, NH3, H2O, CH3F, N2, F2, formic acid, ethene, and ethine) with each other and with benzene, to benzene, naphthalene, pyrene, and coronene dimers, the naphthalene trimer, coronene. H2O and four H-bonded and stacked DNA base pairs (AT and GC). In almost all cases, very good agreement with reliable theoretical or experimental results for binding energies and intermolecular distances is obtained. For stacked aromatic systems and the important base pairs, the DFT-D-BLYP model seems to be even superior to standard MP2 treatments that systematically overbind. The good results obtained suggest the approach as a practical tool to describe the properties of many important van der Waals systems in chemistry. Furthermore, the DFT-D data may either be used to calibrate much simpler (e.g., force-field) potentials or the optimized structures can be used as input for more accurate ab initio calculations of the interaction energies.     

二维材料范德华间隙的利用

Since their discovery, two-dimensional (2D) materials have attracted significant research attention owing to their excellent and controllable physical and chemical properties. These materials have emerged rapidly as important material system owing to their unique properties such as electricity, optics, quantum properties, and catalytic properties. 2D materials are mostly bonded by strong ionic or covalent bonds within the layers, and the layers are stacked together by van der Waals forces, thereby making it possible to peel off 2D materials with few or single layers. The weak interaction between the layers of 2D materials also enables the use of van der Waals gaps for regulating the electronic structure of the system and further optimizing the material properties. The introduction of guest atoms can significantly change the interlayer spacing of the original material and coupling strength between the layers. Also, interaction between the guest and host atom also has the potential to change the electronic structure of the original material, thereby affecting the material properties. For example, the electron structure of a host can be modified by interlayer guest atoms, and characteristics such as carrier concentration, optical transmittance, conductivity, and band gap can be tuned. Organic cations intercalated between the layers of 2D materials can produce stable superlattices, which have great potential for developing new electronic and optoelectronic devices. This method enables the modulation of the electrical, magnetic, and optical properties of the original materials, thereby establishing a family of 2D materials with widely adjustable electrical and optical properties. It is also possible to introduce some new properties to the 2D materials, such as magnetic properties and catalytic properties, by the intercalation of guest atoms. Interlayer storage, represented by lithium-ion batteries, is also an important application of 2D van der Waals gap utilization in energy storage, which has also attracted significant research attention. Herein, we review the studies conducted in recent years from the following aspects: (1) changing the layer spacing to change the interlayer coupling; (2) introducing the interaction between guest and host atoms to change the physico-chemical properties of raw materials; (3) introducing the guest substances to obtain new properties; and (4) interlayer energy storage. We systematically describe various interlayer optimization methods of 2D van der Waals gaps and their effects on the physical and chemical properties of synthetic materials, and suggest the direction of further development and utilization of 2D van der Waals gaps.     

van der Waals气体状态方程对于实际气体pV_m-p曲线的解释

为加深对物理化学中实际气体行为的认识,通过van der Waals方程对不同温度下实际气体的pV_m-p曲线进行了解释。     

The van der Waals equation: analytical and approximate solutions

The thermodynamic properties, enthalpy of vaporization, entropy, Helmholtz function, Gibbs function, but especially the heat capacity at constant volume of a van der Waals gas (and liquid) at the phase transition are examined in two different limit approximations. The first limit approximation is at the near-critical temperatures, i.e., for T/T _c → 1, where T _c is the critical temperature, the other limit approximation is at the near-zero temperatures, T→ 0. In these limits, the analytical equations for liquid and gas concentrations at saturated conditions were obtained. Although the heat capacities at constant volume of a van der Waals gas and liquid do not depend on the volume, they have different values and their change during the phase transition was calculated. It should be noticed that for real substances the equations obtained at the near-zero temperature are only valid for T > T _{triple point} and T ≪ T _c , which means that found equations can be used only for substances with T _{triple point} ≪ T _c .     

Van der Wals团簇ο-xylene N2的共振双光子电离光谱

The one-color resonant two -photon ionization technique is employed to study jetcooled van der Waals(vdW) complex o-xylene?N2 through the S0-S1 transition around the band. The spectra obtained exhibit rich information about the complex intermolecular vdW vibrational modes. We have tentatively assigned all the observed spectral features. The structure of the complex has been obtained by calculation of the minimum energy structure.     

Optimized Liquid-Phase Exfoliation of Magnetic van der Waals Heterostructures: Towards the Single Layer and Deterministic Fabrication of Devices

Van der Waals magnetic materials are promising candidates for spintronics and testbeds for exotic magnetic phenomena in low dimensions. The two-dimensional (2D) limit in these materials is typically reached by mechanically breaking the van der Waals interactions between layers. Alternative approaches to producing large amounts of flakes rely on wet methods such as liquid-phase exfoliation (LPE). Here, we report an optimized route for obtaining monolayers of magnetic cylindrite by LPE. We show that the selection of exfoliation times is the determining factor in producing a statistically significant amount of monolayers while keeping relatively big flake areas (~1 µm²). We show that the cylindrite lattice is preserved in the flakes after LPE. To study the electron transport properties, we have fabricated field-effect transistors based on LPE cylindrite. Flakes are deterministically positioned between nanoscale electrodes by dielectrophoresis. We show that dielectrophoresis can selectively move the larger flakes into the devices. Cylindrite nanoscale flakes present a p-doped semiconducting behaviour, in agreement with the mechanically exfoliated counterparts. Alternating current (AC) admittance spectroscopy sheds light on the role played by potential barriers between different flakes in terms of electron transport properties. The present large-scale exfoliation and device fabrication strategy can be extrapolated to other families of magnetic materials.     

Charge transfer and van der Waals states of jet-cooled dialkylaniline complexes with anthracene

We report here a study of the influence of a physical parameter (i.e. the ionization energy of different donor aromatic molecules) on the spectroscopic and dynamic properties of a series of molecular complexes A-D (A acceptor, D donor) where A is the anthracene molecule and D is one of the following dialkylanilines: dimethyl, diethyl, dipropyl or dibutyl. All complexes exhibit the same spectroscopic behavior already observed for dimethylaniline and diethylaniline cases and tentatively explained by the existence of two isomeric forms for each complex. Decay times and the broad band maximum frequency shifts for the exciplex-like emission type are experiencing a continuous variation in agreement with the change of the ionization energy of the donors. This is confirmed by calculations done using a very simple model based on the interactions between the diabatic A*D and A⁻D⁺ states of the complexes. This agreement is in favor of the initial assumption, that most physical parameters (complexation geometry, coupling between the diabatic states) are only weakly perturbed when changing the donor molecule and this despite an expected increased steric hindrance.     

Designed Synthesis of van der Waals Heterostructures: The Power of Kinetic Control

Selecting specific 2D building blocks and specific layering sequences of van der Waals heterostructures should allow the formation of new materials with designed properties for specific applications. Unfortunately, the synthetic ability to prepare such structures at will, especially in a manner that can be manufactured, does not exist. Herein, we report the targeted synthesis of new metal–semiconductor heterostructures using the modulated elemental‐reactant technique to nucleate specific 2D building blocks, control their thickness, and avoid epitaxial structures with long‐range order. The building blocks, VSe₂ and GeSe₂, have different crystal structures, which inhibits cation intermixing. The precise control of this approach enabled us to synthesize heterostructures containing GeSe₂ monolayers alternating with VSe₂ structural units with specific sequences. The transport properties systematically change with nanoarchitecture and a charge‐density wave‐like transition is observed.