Bis(4‐picoline‐κN)gold(I) dibromidoaurate(I) and bis(4‐picoline‐κN)gold(I) dichloridoaurate(I): space‐group ambiguity?

Bis(4‐picoline‐κN)gold(I) dibromidoaurate(I), [Au(C₆H₇N)₂][AuBr₂], (I), crystallizes in the monoclinic space group P2₁/n, with two half cations and one general anion in the asymmetric unit. The cations, located on centres of inversion, assemble to form chains parallel to the a axis, but there are no significant contacts between the cations. Cohesion is provided by flanking anions, which are connected to the cations by short Au...Au contacts and C—H...Br hydrogen bonds, and to each other by Br...Br contacts. The corresponding chloride derivative, [Au(C₆H₇N)₂][AuCl₂], (II), is isotypic. A previous structure determination of (II), reported in the space group P with very similar axis lengths to those of (I) [Lin et al. (2008). Inorg. Chem. 47 , 2543–2551], might be identical to the structure presented here, except that its γ angle of 88.79 (7)° seems to rule out a monoclinic cell. No phase transformation of (II) could be detected on the basis of data sets recorded at 100, 200 and 295 K.     

Synthesis of Perfluoroalkyl‐Substituted γ‐Lactones and 4,5‐Dihydropyridazin‐3(2H)‐ones via Donor?Acceptor Cyclopropanes

Rh₂(OAc)₄‐Catalyzed decomposition of diazo esters in the presence of perfluoroalkyl‐ or perfluoroaryl‐substituted silyl enol ethers smoothly provided the corresponding alkyl 2‐siloxycyclopropanecarboxylates in very good yields. The generated donor? acceptor cyclopropanes are equivalents of γ‐oxo esters, which we demonstrated by their one‐pot transformations to yield fluorine‐containing heterocycles. A reductive procedure selectively afforded perfluoroalkyl‐substituted γ‐hydroxy esters or γ‐lactones. The treatment of the donor? acceptor cyclopropanes with hydrazine or phenylhydrazine afforded a series of perfluoroalkyl‐ and perfluoroaryl‐substituted 4,5‐dihydropyridazin‐3(2H)‐ones.     

A Straightforward Synthesis of 2‐[1‐Alkyl‐5,6‐bis(alkoxycarbonyl)‐1,2,3,4‐tetrahydro‐2‐oxopyridin‐3‐yl]acetic Acid Derivatives via Domino Michael Addition?Cyclization Reaction

A new and efficient synthesis of 2‐[1‐alkyl‐5,6‐bis(alkoxycarbonyl)‐1,2,3,4‐tetrahydro‐2‐oxopyridin‐3‐yl]acetic acid derivatives by a one‐pot three‐component reaction between primary amine, dialkyl acetylenedicarboxylate, and itaconic anhydride (=3,4‐dihydro‐3‐methylidenefuran‐2,5‐dione) is reported. The reaction was performed without catalyst and under solvent‐free conditions with excellent yields. Notably, the ready availability of the starting materials, and the high level of practicability of the reaction and workup make this approach an attractive complementary method to access to unknown 2‐[1‐alkyl‐5,6‐bis(alkoxycarbonyl)‐1,2,3,4‐tetrahydro‐2‐oxopyridin‐3‐yl]acetic acid derivatives. The structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of domino Michael addition? cyclization reaction is proposed (Scheme 2).     

Partial Hydrolysis of Poly(2‐ethyl‐2‐oxazoline) and Potential Implications for Biomedical Applications?

The hydrolysis of PEtOx is studied to evaluate the potential toxicity of partially hydrolyzed polymers that might interfere with its increasing popularity for biomedical applications. The hydrolysis of PEtOx is studied in the presence of digestive enzymes (gastric and intestinal) and at 5.8 M hydrochloric acid as a function of temperature (57, 73, 90, and 100 °C). It is found that PEtOx undergoes negligible hydrolysis at 37 °C and that thermal and solution properties are not altered when up to 10% of the polymer backbone is hydrolyzed. Mucosal irritation and cytotoxicity is also absent up to 10% hydrolysis levels. In conclusion, PEtOx will not decompose at physiological conditions, and partial hydrolysis will not limit its biomedical applications.

     

Hydrophilic Poly(ether‐ester)s and Poly(ether‐ester‐amide)s Derived from Poly(ε‐caprolactone) and ?COCl Terminated PEG Macromers

A series of poly(ε‐caprolactone) (PCL)‐based multiblock poly(ether‐ester)s (PEE)s and poly(ether‐ester‐amide)s (PEEA)s were obtained from α,ω‐dihydroxy‐PCL ( = 2–4 kDa) and ? COCl di‐terminated poly(ethylene oxide) (PEO) macromers (MAC) of different length ( = 150, 300, 600, 1 000 Da). 4,7,10‐Trioxa‐1,13‐tridecanediamine was used in the synthesis of PEEAs. Bulk polycondensation processes were accomplished by one step (PEE) and two step (PEEA) procedures. PEEAs with PCL/MAC/Trioxy molar ratios 1:2:1 and 1:3:2 were investigated. The multiblock copolymer architecture was proved by ¹H NMR and size exclusion chromatography (SEC) techniques. Unimodal molecular weight (MW) distributions and values in the range of 13.3–21.0 kDa (PEE) and 8.1–12.8 kDa (PEEA) were found. Crystalline PCL‐type phases were identified for both PEEAs and PEEs by X‐ray diffraction. The thermal transitions were investigated by differential scanning calorimetry (DSC). The T_m values (49.9–53.4 °C) reflect those of the PCL component while the T_g of PEEAs (?45 to ?52 °C) are higher than those of the PEEs (?58 to ?61 °C) or the macromers. The equilibrium water uptakes range from 1.0 to 18.4 wt.‐% (PEE) and from 4.4 to 8.8 wt.‐% (PEEA) depending on both the composition and length of the ethylene oxide sequences. A dependence of surface homogeneity on copolymer composition was found for PEEs by dynamic contact angle measurements.

The preparation of PEEAs and PEEs.     

Isostructural or not? Adducts of some aryl­tin halides with (E)‐1,2‐bis(4‐pyridyl)­ethene

The title complexes [μ‐(E)‐4,4′‐(ethene‐1,2‐diyl)­di­pyridine‐κ²N:N′]­bis­[halotris(4‐methyl­phenyl)­tin(IV)], [Sn₂(C₇H₇)₆X₂(C₁₂H₁₀N₂)], where halo is chloro (X = Cl) and bromo (X = Br) are isostructural. In both crystals, the mol­ecules lie on inversion centers, and there are voids of ca 80 ų that could, but apparently do not, accommodate water mol­ecules. The corresponding iodo structure (X = I) is almost, but not quite, isostructural with the other two compounds; when Br is changed to I, the length of the c axis decreases by more than 1 Å and the voids are no longer large enough to accomodate any solvent mol­ecule. The related complex [μ‐(E)‐4,4′‐(ethene‐1,2‐diyl)­di­pyridine‐κ²N:N′]­bis­[chloro­tri­phenyl­tin(IV)], [Sn₂(C₆H₅)₆Cl₂(C₁₂H₁₀N₂)], crystallizes in a related structure, but the mol­ecules lie on general rather than on special positions. The molecular structures of the four complexes are similar, but the conformation of the phenyl derivative is approximately eclipsed rather than staggered.     

A Facile Synthesis of a Wide Variety of Cationic Ruthenium Hydrido‐Arene Complexes of binap (=1,1′‐Binaphthalene‐2,2′‐diylbis(diphenylphosphane)) and MeO?biphep (=6,6′‐Dimethoxybiphenyl‐2,2′‐diylbis(diphenylphosphane))

A straightforward high‐yield synthetic route to the cationic hydrido‐arene complexes [RuH(η⁶‐arene)(binap or MeO biphep)](CF₃SO₃), with a variety of arenes containing both donor and acceptor substituents, is described. ¹³C‐NMR Data for these complexes are reported. Several of these Ru‐complexes have been used as transfer‐hydrogenation catalysts in the reduction of acetophenone.     

Formation of Trinuclear Rhodium‐Hydride Complexes [{Rh(PP*)H}3‐ (μ2‐H)3(μ3‐H)][anion]2—During Asymmetric Hydrogenation?

Recently described and fully characterized trinuclear rhodium‐hydride complexes [{Rh(PP*)H}₃(μ₂‐H)₃(μ₃‐H)][anion]₂ have been investigated with respect to their formation and role under the conditions of asymmetric hydrogenation. Catalyst–substrate complexes with mac (methyl (Z)‐ N‐acetylaminocinnamate) ([Rh(tBu‐BisP*)(mac)]BF₄, [Rh(Tangphos)(mac)]BF₄, [Rh(Me‐BPE)(mac)]BF₄, [Rh(DCPE)(mac)]BF₄, [Rh(DCPB)(mac)]BF₄), as well as rhodium‐hydride species, both mono‐([Rh(Tangphos)‐ H₂(MeOH)₂]BF₄, [Rh(Me‐BPE)H₂(MeOH)₂]BF₄), and dinuclear ([{Rh(DCPE)H}₂(μ₂‐H)₃]BF₄, [{Rh(DCPB)H}₂(μ₂‐H)₃]BF₄), are described. A plausible reaction sequence for the formation of the trinuclear rhodium‐hydride complexes is discussed. Evidence is provided that the presence of multinuclear rhodium‐hydride complexes should be taken into account when discussing the mechanism of rhodium‐promoted asymmetric hydrogenation.     

2‐Halogeno‐1,3,2‐diazaarsolenes and 2‐halogeno‐1,3,2‐diazastibolenes: Examples for spontaneous E?X bond heterolysis or not?

2‐X‐1,3,2‐diazaarsolenes and 2‐X‐1,3,2‐ stibolenes (X = Cl, Br) were prepared from appropriate α‐amino‐aldimine precursors via transamination with ClSb(NMe₂)₂ or via base‐induced dehydrohalogenation with EX₃ (E = As, Sb). The products were further converted into 2‐iodo‐derivatives via halide exchange with Me₃SiI, or into 1,3,2‐diazaarsolenium or 1,3,2‐stibolenium salts via halide abstraction using E′X₃ (E′ = Al, Ga, Sb) or Me₃SiOTf. All compounds synthesized were characterized by spectroscopic data and several of them by single‐crystal X‐ray diffraction studies. The results of these investigations confirmed that diazaarsolenium or stibolenium cations are stabilized by similar π‐delocalization effects as the corresponding diazaphospholenium cations. 2‐Halogeno‐1,3,2‐diazaarsolenes and 2‐halogeno‐132‐stibolenes are best addressed as molecular species whose covalent E X bonds are as in 2‐chloro‐diazaphospholenes weakened by intramolecular π(C₂N₂) → σ*(E X) and, in the case of the Sb‐containing heterocycles, inter‐ molecular n(X′) → σ*(E X) hyperconjugation between the σ* (E X) orbital and a lone‐pair of electrons on the halogen atom of a neighboring molecule. Correlation of structural and spectroscopic data and the evaluation of halide transfer reactions allowed to conclude that the extent of E X bond weakening in the 2‐X‐substituted heterocycles decreases and thus the Lewis acidity of the cations increases, with increasing atomic number of the pnicogen atom. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:327–338, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20098     

Luminescent Amphiphilic 2,6‐Bis(1,2,3‐triazol‐4‐yl)pyridine?Platinum(II) Complexes: Synthesis,Characterization, Electrochemical,Photophysical, and Langmuir–Blodgett Film‐Formation Studies

A new series of platinum(II) complexes with tridentate ligands 2,6‐bis(1‐alkyl‐1,2,3‐triazol‐4‐yl)pyridine and 2,6‐bis(1‐aryl‐1,2,3‐triazol‐4‐yl)pyridine (N7R), [Pt(N7R)Cl]X ( 1 – 7 ) and [Pt(N7R)(C?CR′)]X ( 8 – 17 ; R=n‐C₄H₉, n‐C₈H₁₇, n‐C₁₂H₂₅, n‐C₁₄H₂₉, n‐C₁₈H₃₇, C₆H₅, and CH₂‐C₆H₅; R′=C₆H₅, C₆H₄‐CH₃‐p_, C₆H₄‐CF₃‐p, C₆H₄‐N(CH₃)₂‐p, and cholesteryl 2‐propyn‐1‐yl carbonate; X=OTf^?, PF₆^?, and Cl^?), has been synthesized and characterized. Their electrochemical and photophysical properties have also been studied. Two amphiphilic platinum(II)? 2,6‐bis(1‐dodecyl‐1,2,3‐triazol‐4‐yl)pyridine complexes ( 3‐Cl and 8 ) were found to form stable and reproducible Langmuir–Blodgett (LB) films at the air/water interface. These LB films were characterized by the study of their surface‐pressure–molecular‐area (π–A) isotherms, XRD, and IR and polarized‐IR spectroscopy.     

Rhodium(III)‐Catalyzed ortho C?H Heteroarylation of (Hetero)aromatic Carboxylic Acids: A Rapid and Concise Access to π‐Conjugated Poly‐heterocycles

Rh^III‐catalyzed oxidative C H/C H cross‐coupling between (hetero)aromatic carboxylic acids and various heteroarenes has been accomplished to construct highly functionalized ortho‐carboxy‐substituted bi(hetero)aryls. The use of a carboxy group as the directing group obviates tedious steps for installation and removal of extra directing groups, and enables a facile one‐step synthesis of ortho‐carboxy bi(hetero)aryls. The method provides opportunities for rapid assembly of a library of important fluorene and coumarin‐type poly‐heterocycles through intramolecular electrophilic substitution or oxidative lactonization. As illustrative examples, the strategy developed herein greatly streamlines accesses to a variety of appealing polyheterocycles such as DTPO (5H‐dithieno[3,2‐b:2′,3′‐d]pyran‐5‐one), CPDTO (cyclopentadithiophen‐4‐one), and indenothiophenes.     

Orthoamides and Iminium Salts LXXII: N,N,N′,N′,N′′,N′′,N′′′,N′′′‐Octamethyl‐(but‐2‐yne)‐bis(amidinium) Tetrafluoroborate: The First Bis‐amidinium Salt of Acetylenedicarboxyclic Acid. A New Superelectrophile?

A method for the preparation of the first acetylenedicarboxamidinium salt from a bis‐orthoamide derivative of acetylenedicarboxyclic acid has been established. The salt reacted with cyclopentadiene and furan at room temperature to give bicyclic [4+2]‐cycloaddition products. The solid compounds were characterized by solution NMR spectroscopy and by single‐crystal X‐ray diffraction. Quantum‐chemical calculations of the isolated N,N,N′,N′,N′′,N′′,N′′′,N′′′‐octamethyl‐acetylene‐bis(carboxamidinium) ion showed very good agreement with the spectroscopic and diffraction data.     

Electrophilic Arene Hydroxylation and Phenol O?H Oxidations Performed by an Unsymmetric μ‐η1:η1‐O2‐Peroxo Dicopper(II) Complex

Reactions of the unsymmetric dicopper(II) peroxide complex [Cu^II₂(μ‐η¹:η¹‐O₂)(m‐XYL^N3N4)]²⁺ ( 1 O₂ , where m‐XYL is a heptadentate N‐based ligand), with phenolates and phenols are described. Complex 1 O₂ reacts with p‐X‐PhONa (X=MeO, Cl, H, or Me) at ?90 °C performing tyrosinase‐like ortho‐hydroxylation of the aromatic ring to afford the corresponding catechol products. Mechanistic studies demonstrate that reactions occur through initial reversible formation of metastable association complexes [Cu^II₂(μ‐η¹:η¹‐O₂)(p‐X‐PhO)(m‐XYL^N3N4)]⁺ ( 1 O₂ ?X‐PhO) that then undergo ortho‐hydroxylation of the aromatic ring by the peroxide moiety. Complex 1 O₂ also reacts with 4‐X‐substituted phenols p‐X‐PhOH (X=MeO, Me, F, H, or Cl) and with 2,4‐di‐tert‐butylphenol at ?90 °C causing rapid decay of 1 O₂ and affording biphenol coupling products, which is indicative that reactions occur through formation of phenoxyl radicals that then undergo radical C? C coupling. Spectroscopic UV/Vis monitoring and kinetic analysis show that reactions take place through reversible formation of ground‐state association complexes [Cu^II₂(μ‐η¹:η¹‐O₂)(X‐PhOH)(m‐XYL^N3N4)]²⁺ ( 1 O₂ ?X‐PhOH) that then evolve through an irreversible rate‐determining step. Mechanistic studies indicate that 1 O₂ reacts with phenols through initial phenol binding to the Cu₂O₂ core, followed by a proton‐coupled electron transfer (PCET) at the rate‐determining step. Results disclosed in this work provide experimental evidence that the unsymmetric 1 O₂ complex can mediate electrophilic arene hydroxylation and PCET reactions commonly associated with electrophilic Cu₂O₂ cores, and strongly suggest that the ability to form substrate?Cu₂O₂ association complexes may provide paths to overcome the inherent reactivity of the O₂‐binding mode. This work provides experimental evidence that the presence of a H⁺ completely determines the fate of the association complex [Cu^II₂(μ‐η¹:η¹‐O₂)(X‐PhO(H))(m‐XYL^N3N4)]ⁿ⁺ between a PCET and an arene hydroxylation reaction, and may provide clues to help understand enzymatic reactions at dicopper sites.     

All‐Carbon [3+3] Oxidative Annulations of 1,3‐Enynes by Rhodium(III)‐Catalyzed C?H Functionalization and 1,4‐Migration

1,3‐Enynes containing allylic hydrogens cis to the alkyne function as three‐carbon components in rhodium(III)‐catalyzed, all‐carbon [3+3] oxidative annulations to produce spirodialins. The proposed mechanism of these reactions involves the alkenyl‐to‐allyl 1,4‐rhodium(III) migration.     

Temperature‐Dependent Product Selectivity in the Vilsmeier?Haack Reaction on Bis(phenylhydrazones) of Bis(aroylmethyl) Sulfides (=1,1′‐[Thiobis(methylene)]bis[arylmethanone] Bis(2‐phenylhydrazones)): Synthesis of 3‐Aroylindoles (=Aryl(1H‐indol‐3‐yl)methanones)

The bis(phenylhydrazone) of substituted diphenacyl sulfides (=1,1′‐[thiobis(methylene)]bis[arylmethanone] bis(2‐phenylhydrazones)) 1 underwent a tandem sequence of reactions upon treatment with Vilsmeier reagent, ultimately yielding 3‐aroylindoles (=aryl(1H‐indol‐3‐yl)methanones) 3 (Scheme 1 and Table 1). The reaction seems to be product selective depending upon the reaction temperature.