Syntheses of Thiazole‐Containing Macroheterocycles Related to Porphycene

The syntheses of 2,2′‐bithiazole‐containing and related expanded macrocycles 13 – 16 were accomplished by the McMurry coupling reaction of the corresponding [2,2′‐bithiazole]‐5,5′‐dicarbaldehyde 6c and 2,2′‐(1,4‐phenylene)bis[thiazole‐5‐carbaldehyde] 7 , readily available by a two‐step reaction sequence. The success of the dimerization strongly depends on the steric repulsion of the substituents vicinal to the CHO group.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Alkyl‐Tethered Bis‐Phosphoryl Compounds with two 1,3,2‐Benzodiazaphosphorinone Units; Oxidation,Complexation, and X‐Ray Structure Analysis of Selected Compounds

The reaction of the bis‐chlorophosphines 1 a – 1 d with bis(2‐chloroethyl)amine hydrochloride in the presence of triethylamine and with various trimethylsilylamines led to a new class of bis‐phosphorus ligands 2 a – 2 c and 3 a – 3 g . ³¹P‐NMR studies suggested that the bis‐phosphorus ligands undergo rotation reactions about the alkyl bridge in polar solvents. Compounds 2 a – 2 c showed initially only one sharp singlet each in their ³¹P‐NMR spectra. After a few days at room temperature, two signals were observed. Similar results were observed for 3 a – 3 g . In the solid state, the two phosphorus atoms in 2 c are not equivalent, as was confirmed by the observation of two signals in the solid state ³¹P‐NMR spectrum. Oxidation reactions of 2 a – 2 c by the hydrogen peroxide‐urea 1 : 1 adduct (NH₂)₂C(:O) · H₂O₂ led to the formation of the corresponding phosphoryl compounds 4 a – 4 c . Reaction of 2 a and 3 a with Pt[COD]Cl₂ (COD = 1.5‐Cyclooctadiene) furnished the complexes 5 and 6 . The NMR spectra suggested that the two chlorine atoms are in cis position. X‐ray structure analyses were conducted for 2 a , which exhibits twofold symmetry; 2 c , which is linked into dimers by hydrogen bonds C–H…O; and 6 , confirming the cis configuration.     

Synthesis of New Bis‐imidazole Derivatives

The reaction of aldimines with α‐(hydroxyimino) ketones of type 10 (1,2‐diketone monooximes) was used to prepare 2‐unsubstituted imidazole 3‐oxides 11 bearing an alkanol chain at N(1) (Scheme 2, Table 1). These products were transformed into the corresponding 2H‐imidazol‐2‐ones 13 and 2H‐imidazole‐2‐thiones 14 by treatment with Ac₂O and 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione, respectively (Scheme 3). The three‐component reaction of 10 , formaldehyde, and an alkane‐1,ω‐diamine 15 gave the bis[1H‐imidazole 3‐oxides] 16 (Scheme 4, Table 2). With Ac₂O, 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione or Raney‐Ni, the latter reacted to give the corresponding bis[2H‐imidazol‐2‐ones] 19 and 20 , bis[2H‐imidazol‐2‐thione] 21 , and bis[imidazole] 22 , respectively (Schemes 5 and 6). The structures of 11a and 16b were established by X‐ray crystallography.     

Synthesis of P‐Unsymmetrically Substituted Derivatives of NAPHOS

2, 2′‐Bromomethyl‐1, 1′‐binaphthyl reacted with di‐tert‐butylphosphine to form (R, S)‐4, 4‐di‐tert‐butyl‐4, 5‐dihydro‐3Hdinaphtho[2, 1‐c:1′, 2′‐e] phosphepinium bromide 5a . The di‐iso‐propyl‐ ( 5b) and the phenyl‐ethyl ( 5c ) analogue of compound 5a were prepared by similar routes. Treatment of 5a with potassium diphenylphosphide, KPPh₂, afforded the corresponding bis‐phosphine, 2‐di‐tert‐butylphosphino‐methyl‐2′‐diphenylphosphino‐methyl‐1, 1′‐binaphthyl 6 . An attempt at the synthesis of the first example of a bis‐phosphonite ligand with a 2, 2′‐dimethyl‐1, 1′‐binaphthyl backbone unexpectedly led, in the first step, to 2, 2′‐bis[diethylamino‐methoxy‐phosphino]‐1, 1′‐binaphthyl 9 . X‐ray crystal structure analyses were carried out for the phosphepinium bromides 5a and 5c , and for the bis‐phosphines 6 and 9 . In compounds 5a and 5c the interplanar angle between the two parts of the binaphthyl group is 65.8° and 64.5°, respectively, as reflected in the conformation of the seven‐membered ring. In 5a the bromide and methanol residues are hydrogen‐bonded to form Br^— (···HOCH₃)₂ units. In 6 the binaphthyl interplanar angle is 86.1°; the two halves of the molecule show appreciably different conformations of the ring substituents, as do those of 9 (binaphthyl angle 78.6°).     

7‐Halogenated 7‐Deazapurine 2′‐Deoxyribonucleosides Related to 2′‐Deoxyadenosine, 2′‐Deoxyxanthosine,and 2′‐Deoxyisoguanosine: Syntheses and Properties

A series of 7‐fluorinated 7‐deazapurine 2′‐deoxyribonucleosides related to 2′‐deoxyadenosine, 2′‐deoxyxanthosine, and 2′‐deoxyisoguanosine as well as intermediates 4b – 7b, 8, 9b, 10b , and 17b were synthesized. The 7‐fluoro substituent was introduced in 2,6‐dichloro‐7‐deaza‐9H‐purine ( 11a ) with Selectfluor (Scheme 1). Apart from 2,6‐dichloro‐7‐fluoro‐7‐deaza‐9H‐purine ( 11b ), the 7‐chloro compound 11c was formed as by‐product. The mixture 11b / 11c was used for the glycosylation reaction; the separation of the 7‐fluoro from the 7‐chloro compound was performed on the level of the unprotected nucleosides. Other halogen substituents were introduced with N‐halogenosuccinimides ( 11a → 11c – 11e ). Nucleobase‐anion glycosylation afforded the nucleoside intermediates 13a – 13e (Scheme 2). The 7‐fluoro‐ and the 7‐chloro‐7‐deaza‐2′‐deoxyxanthosines, 5b and 5c , respectively, were obtained from the corresponding MeO compounds 17b and 17c , or 18 (Scheme 6). The 2′‐deoxyisoguanosine derivative 4b was prepared from 2‐chloro‐7‐fluoro‐7‐deaza‐2′‐deoxyadenosine 6b via a photochemically induced nucleophilic displacement reaction (Scheme 5). The pK_a values of the halogenated nucleosides were determined (Table 3). ¹³C‐NMR Chemical‐shift dependencies of C(7), C(5), and C(8) were related to the electronegativity of the 7‐halogen substituents (Fig. 3). In aqueous solution, 7‐halogenated 2′‐deoxyribonucleosides show an approximately 70% S population (Fig. 2 and Table 1).     

Labelling of Carbaboranyl Compounds with a Selenium Atom with a View to Applications in Boron‐Neutron‐Capture Therapy (BNCT) and Positron‐Emission Tomography (PET)

We synthesized 2′‐carbaboranyl‐2,5′‐bi‐1H‐benzimidazoles containing 10 B‐atoms and labeled with Se or the positron‐emitting radionuclide ⁷³Se (t_1/2=7.1 h), with a view to their application to cancer treatment by boron‐neutron‐capture therapy (BNCT) and to compound‐distribution measurements in vivo by positron‐emission tomography (PET). Thus, 2,2′‐{{2′‐{4‐[1,2‐dicarba‐closo‐dodecaboran(12)‐2‐ylmethoxy]phenyl}‐[2,5′‐bi‐1H‐benzimidazol]‐5‐yl}imino}bis[ethanol] ( 26c ) was obtained by the reaction of 2,2′‐[(3,4‐diaminophenyl)imino]bis[ethanol] ( 19 ) with ethyl 2‐{4‐[1,2‐dicarba‐closo‐dodecaboran(12)‐2‐ylmethoxy]phenyl}‐1H‐benzimidazole‐5‐carboximidate hydrochloride ( 25 ), as well as the analogues 26a and 26b (Scheme 6). Tosylation of compound 26c gave 4 regioisomers 27a – d , which, after selenation, produced 2′‐{4‐[1,2‐dicarba‐closo‐dodecaboran(12)‐2‐ylmethoxy]phenyl}‐5‐(tetrahydro‐2H‐1,4‐selenazin‐4‐yl)‐2,5′‐bi‐1H‐benzimidazole ( 29 ) in 42% yield (Scheme 7).     

Temperature‐Dependent Product Selectivity in the Vilsmeier?Haack Reaction on Bis(phenylhydrazones) of Bis(aroylmethyl) Sulfides (=1,1′‐[Thiobis(methylene)]bis[arylmethanone] Bis(2‐phenylhydrazones)): Synthesis of 3‐Aroylindoles (=Aryl(1H‐indol‐3‐yl)methanones)

The bis(phenylhydrazone) of substituted diphenacyl sulfides (=1,1′‐[thiobis(methylene)]bis[arylmethanone] bis(2‐phenylhydrazones)) 1 underwent a tandem sequence of reactions upon treatment with Vilsmeier reagent, ultimately yielding 3‐aroylindoles (=aryl(1H‐indol‐3‐yl)methanones) 3 (Scheme 1 and Table 1). The reaction seems to be product selective depending upon the reaction temperature.     

Synthesis of [3,3′(4H,4′H)‐Bi‐2H‐1,3‐oxazine]‐4,4′‐diones and Their Hydrolysis

The [3,3′(4H,4′H)‐bi‐2H‐1,3‐oxazine]‐4,4′‐diones 3a – 3i were obtained by [2+4] cycloaddition reactions of furan‐2,3‐diones 1a – 1c with aromatic aldazines 2a – 2d (Scheme 1). So, new derivatives of bi‐2H‐1,3‐oxazines and their hydrolysis products, 3,5‐diaryl‐1H‐pyrazoles 4a – 4c (Scheme 3), which are potential biologically active compounds, were synthesized for the first time.     

Halogenation of Fluorinated 1,3,5‐Triketones

The behavior of linear and cyclic fluorinated 1,3,5‐triketones and their metal derivatives towards common halogenating agents was examined, and optimal reaction conditions for the straightforward synthesis of mono‐, di‐, and tetrahalogenated products were found (Schemes 1–3). An aromatization through a double HBr elimination from an α,α′‐dibrominated cyclohexanone was shown to be a promising synthetic route to 1,1′‐(2‐hydroxy‐1,3‐phenylene)bis[2,2,2‐trifluoroethanones] (= 2,6‐bis(trifluoroacetyl)phenols; Scheme 4). Additionally, the 1,3,5‐triketones prepared add readily H₂O or alcohols to produce novel bridged 2,6‐dihydroxypyran‐4‐ones (Scheme 2). The structure of the obtained compounds 6a and 7a was confirmed by X‐ray structure analysis.     

Efficient Synthesis of Novel Coumarin‐3‐carboxamides (=2‐Oxo‐2H‐1‐benzopyran‐3‐carboxamides) Containing Lipophilic Spacers

The novel coumarin‐3‐carboxamides (=2‐oxo‐2H‐1‐benzopyran‐3‐carboxamides) 5a – 5g containing lipophilic spacers were synthesized through the Ugi‐four‐component reaction (Scheme 1). The reactions of aromatic aldehydes 1 , 4,4′‐oxybis[benzenamine] or 4,4′‐methylenebis[benzenamine] as diamine 2 , coumarin‐3‐carboxylic acid (=2‐oxo‐2H‐benzopyran‐3‐carboxylic acid; 3 ), and alkyl isocyanides 4 lead to the desired substituted coumarin‐3‐carboxamides 5a – 5g at room temperature with high bond‐forming efficiency. These novel coumarin derivatives exhibit brilliant fluorescence at 544 nm in CHCl₃.     

Synthesis of Some Novel Thioxanthenone‐Fused Azacrown Ethers,and Their Use as New Catalysts in the Efficient,Mild, and Regioselective Conversion of Epoxides to β‐Hydroxy Thiocyanates with Ammonium Thiocyanate

The regioselective ring‐opening reactions of some epoxides with ammonium thiocyanate in the presence of a series of new 9H‐thioxanthen‐9‐one‐fused azacrown ethers, i.e., 7 – 11 (Scheme 1), and also of dibenzo[18]crown‐6 ( 12 ), Kryptofix^® 22 ( 13 ), and benzo[15]crown‐5 ( 14 ) were studied (Tables 1 and 2). The epoxides were subjected to cleavage by NH₄SCN in the presence of these catalysts under mild conditions in various aprotic solvents. Reagents and conditions were identified for the synthesis of individual β‐hydroxy thiocyanates in high yield and with more than 90% regioselectivity. The results can be discussed in terms of a four‐step mechanism (Scheme 2): 1) formation of a complex between catalyst and NH₄SCN, 2) release of SCN^? from the complex, 3) reaction of the released SCN^? at the sterically less hindered site of the epoxide, and 4) regeneration of the catalyst. The major advantages of this method are the high regioselectivity, the simple regeneration of the catalyst, the reuse of it through several cycles without a decrease of activity, and the ease of workup of the reaction mixtures.     

Silylhydrazine und dimere N,N′‐Dilithium‐N,N′‐bis(silyl)hydrazide – Synthesen,Reaktionen, Isomerisierungen

Silylhydrazines and Dimeric N,N′‐Dilithium‐N,N′‐bis(silyl)hydrazides – Syntheses, Reactions, Isomerisations Di‐tert.‐butylchlorosilane reacts with dilithiated hydrazine in a molar ratio to give the N,N′‐bis(silyl)hydrazine, [(Me₃C)₂SiHNH]₂, ( 5 ). Isomeric tris(silyl)hydrazines, N‐difluorophenylsilyl‐N′,N′‐bis(dimethylphenylsilyl)hydrazine ( 7 ) and N‐difluorophenylsilyl‐N,N′‐bis(dimethylphenylsilyl)hydrazine ( 8 ) are formed in the reaction of N‐lithium‐N′‐N′‐bis(dimethylphenylsilyl)hydrazide and F₃SiPh. Isomeric bis(silyl)hydrazines, (Me₃C)₂SiFNHNHSiMe₂Ph ( 9 ) and (Me₃C)₂‐ SiF(PhMe₂Si)N–NH₂ ( 10 ) are the result of the reaction of di‐tert.‐butylfluorosilylhydrazine and ClSiMe₂Ph in the presence of Et₃N. Quantum chemical calculations for model compounds demonstrate the dyotropic course of the rearrangement. The monolithium derivative of 5 forms a N‐lithium‐N′,N′‐bis(silyl)hydrazide ( 11 ). The dilithium salts of 5 ( 13 ) and of the bis(tert.‐butyldiphenylsilyl)hydrazine ( 12 ) crystallize as dimers with formation of a central Li₄N₄ unit. The formation of 12 from 11 occurs via a N′ → N‐silyl group migration. Results of crystal structure analyses are reported.     

Stereoselective Synthesis of [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐D‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐L‐valine]cyclosporin A

Addition of various amines to the 3,3‐bis(trifluoromethyl)acrylamides 10a and 10b gave the tripeptides 11a – 11f , mostly as mixtures of epimers (Scheme 3). The crystalline tripeptide 11f ₂ was found to be the N‐terminal (2‐hydroxyethoxy)‐substituted (R,S,S)‐ester HOCH₂CH₂O‐D ‐Val(F₆)‐MeLeu‐Ala‐O^tBu by X‐ray crystallography. The C‐terminal‐protected tripeptide 11f ₂ was condensed with the N‐terminus octapeptide 2b to the depsipeptide 12a which was thermally rearranged to the undecapeptide 13a (Scheme 4). The condensation of the epimeric tripeptide 11f ₁ with the octapeptide 2b gave the undecapeptide 13b directly. The undecapeptides 13a and 13b were fully deprotected and cyclized to the [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐D ‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐L ‐valine]]cyclosporins 14a and 14b , respectively (Scheme 5). Rate differences observed for the thermal rearrangements of 12a to 13a and of 12b to 13b are discussed.     

Synthesis of 1,3‐Selenazol‐2(3H)‐imines

The reaction of N,N′‐diarylselenoureas 16 with phenacyl bromide in EtOH under reflux, followed by treatment with NH₃, gave N,3‐diaryl‐4‐phenyl‐1,3‐selenazol‐2(3H)‐imines 13 in high yields (Scheme 2). A reaction mechanism via formation of the corresponding Se‐(benzoylmethyl)isoselenoureas 18 and subsequent cyclocondensation is proposed (Scheme 3). The N,N′‐diarylselenoureas 16 were conveniently prepared by the reaction of aryl isoselenocyanates 15 with 4‐substituted anilines. The structures of 13a and 13c were established by X‐ray crystallography.     

Pteridines. Part CXVII

A series of side chain reactions starting from the 6‐ and 7‐styryl‐substituted 1,3‐dimethyllumazines 1 and 21 as well as from the 6‐ and 7‐[2‐(methoxycarbonyl)ethenyl]‐substituted 1,3‐dimethyllumazine 2 and 22 were performed first by addition of Br₂ to the C?C bond forming the 1′,2′‐dibromo derivatives 3, 4, 24 , and 26 in high yields (Schemes 1 and 3) (lumazine=pteridine‐2,4(1H,3H)‐dione). Treatment of 3 with various nucleophiles gave rise to an unexpected tele‐substitution in 7‐position and elimination of the Br‐atoms generating 7‐alkoxy‐ (see 5 and 6 ), 7‐hydroxy‐ (see 7 ) and 7‐amino‐6‐styryl‐1,3‐dimethyllumazines (see 8 – 11 ) (Scheme 1). On the other hand, 4 underwent, with dilute DBU (1,8‐diazabicyclo[5.4.0]undec‐2‐ene), a normal HBr elimination in the side chain leading to 18 , whereas treatment with MeONa afforded a more severe structural change to 19 . Similarly, 24 and 26 reacted to 27, 32 , and 33 under mild conditions, whereas in boiling NaOMe/MeOH, 24 gave 7‐(2‐dimethoxy‐2‐phenylethyl)‐1,3‐dimethyllumazine ( 30 ) which was hydrolyzed to give 31 (Scheme 3). From the reactions of 4 and 24 with DBU resulted the dark violet substance 20 and 25 , respectively, in which DBU was added to the side chain (Scheme 2). The styryl derivatives 1 and 21 could be converted, by a Sharpless dihydroxylation reaction, into the corresponding stereoisomeric 6‐ and 7‐(1,2‐dihydroxy‐2‐phenylethyl)‐1,3‐dimethyllumazines 34 – 37 (Scheme 4). The dihydroxy compounds 34 and 35 were also acetylated to 38 and 39 which, on catalytic reduction followed by formylation, yielded the diastereoisomer mixtures 40 and 41 . Deacetylation to 42 and 45 allowed the chromatographic separation of the diastereoisomers resulting in the isolation of 43 and 44 as well as 46 and 47 , respectively. Introduction of a 6‐ or 7‐ethynyl side chains proceeded well by a Sonogashira reaction with 6‐ ( 48 ) or 7‐chloro‐1,3‐dimethyllumazine ( 55 ) yielding 49 – 51 and 56 – 58 (Scheme 5). The direction of H₂O addition to the triple bond is depending on the substituents since the 6‐ ( 49 ) and 7‐(phenylethynyl)‐1,3‐dimethyllumazine ( 56 ) showed attack at the 2′‐position yielding 53 and 60 , in contrast to the 6‐ ( 51 ) and 7‐ethynyl‐1,3‐dimethyllumazine ( 58 ) favoring attack at C(1′) and formation of 6‐ ( 52 ) and 7‐acetyl‐1,3‐dimethyllumazine ( 59 ).     

Synthesis of 9‐Halogenated 9‐Deazaguanine N7‐(2′‐Deoxyribonucleosides)

The syntheses of N⁷‐glycosylated 9‐deazaguanine 1a as well as of its 9‐bromo and 9‐iodo derivatives 1b , c are described. The regioselective 9‐halogenation with N‐bromosuccinimide (NBS) and N‐iodosuccinimide (NIS) was accomplished at the protected nucleobase 4a (2‐{[(dimethylamino)methylidene]amino}‐3,5‐dihydro‐3‐[(pivaloyloxy)methyl]‐4H‐pyrrolo[3,2‐d]pyrimidin‐4‐one). Nucleobase‐anion glycosylation of 4a – c with 2‐deoxy‐3,5‐di‐O‐(p‐toluoyl)‐α‐D ‐erythro‐pentofuranosyl chloride ( 5 ) furnished the fully protected intermediates 6a – c (Scheme 2). They were deprotected with 0.01M NaOMe yielding the sugar‐deprotected derivatives 8a – c (Scheme 3). At higher concentrations (0.1M NaOMe), also the pivaloyloxymethyl group was removed to give 7a – c , while conc. aq. NH₃ solution furnished the nucleosides 1a – c . In D₂O, the sugar conformation was always biased towards S (67–61%).     

Concise Synthesis of [1,1′‐Biisoquinoline]‐4,4′‐diol via a Protecting Group Strategy and Its Application for Potential Liquid‐Crystalline Compounds

The [1,1′‐biisoquinoline]‐4,4′‐diol ( 4a ), which was obtained as hydrochloride 4a ?2 HCl in two steps starting from the methoxymethyl (MOM)‐protected 1‐chloroisoquinoline 8 (Scheme 3), opens access to further O‐functionalized biisoquinoline derivatives. Compound 4a ?2 HCl was esterified with 4‐(hexadecyloxy)benzoyl chloride ( 5b ) to give the corresponding diester 3b (Scheme 4), which could not be obtained by Ni‐mediated homocoupling of 6b (Scheme 2). The ether derivative 2b was accessible in good yield by reaction of 4a ?2 HCl with the respective alkyl bromide 9 under the conditions of Williamson etherification (Scheme 4). Slightly modified conditions were applied to the esterification of 4a ?2 HCl with galloyl chlorides 10a – h as well as etherification of 4a ?2 HCl with 6‐bromohexyl tris(alkyloxy)benzoates 11b , d – h and [(6‐bromohexyl)oxy]‐substituted pentakis(alkyloxy)triphenylenes 14a – c (Scheme 5). Despite the bulky substituents, the respective target 1,1′‐biisoquinolines 12, 13 , and 15 were isolated in 14–86% yield (Table).     

Cationic,water‐soluble,fluorene‐containing poly(arylene ethynylene)s: Effects of water solubility on aggregation,photoluminescence efficiency,and amplified fluorescence quenching in aqueous solutions

Three novel fluorene‐containing poly(arylene ethynylene)s with amino‐functionalized side groups were synthesized through the Sonogashira reaction. They were poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐{2,5‐bis[3′‐(N,N‐diethylamino)‐1′‐oxapropyl]‐1,4‐phenylene} ( P1 ), poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene} ( P2 ), and poly({9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐(1,4‐phenylene)) ( P3 ). Through the postquaternization treatment of P1 – P3 with methyl iodide, we obtained their cationic water‐soluble conjugated polyelectrolytes (WSCPs): P1′ – P3′ . The water solubility was gradually improved from P3′ to P1′ with increasing contents of hydrophilic side chains. After examining the ultraviolet–visible absorption and photoluminescence (PL) spectra, fluorescence lifetimes, and dynamic light scattering data, we propose that with the reduction of the water solubility from P1′ to P3′ , they exhibited a gradually increased degree of aggregation in H₂O. The PL quantum yields of P1′ – P3′ in H₂O displayed a decreasing tendency consistent with the increased degree of aggregation, suggesting that the pronounced degree of aggregation was an important reason for the low PL quantum yields of WSCPs in H₂O. Two structurally analogous water‐soluble trimers of P2′ and P3′ , model compounds 2,7‐bis(9″,9″‐bis{6‴‐[(N,N‐diethyl)‐N‐methylammonium] hexyl}‐2″‐fluorenylethynyl)‐9,9‐bis{6′‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}fluorene hexaiodide and 1,4‐bis(9′,9′‐bis{6″‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}‐2′‐fluorenylethynyl)benzene tetraiodide, were synthesized. The amplified fluorescence quenching of these WSCPs by Fe(CN)₆⁴⁻ in H₂O was studied by comparison with a corresponding analogous trimer. The effects of aggregation on the fluorescence quenching may be two‐edged in these cases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5778–5794, 2006     

Synthesis of 5‐Aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles via Three‐Component Reaction of 1,1‐Bis(methylsulfanyl)‐2‐nitroethene,Aromatic Aldehydes,and Hydrazine

An efficient approach for the preparation of functionalized 5‐aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles 2 is described. This three‐component reaction between benzaldehydes 1 , NH₂NH₂?H₂O, and 1,1‐bis(methylsulfanyl)‐2‐nitroethene proceeds in EtOH under reflux conditions in good‐to‐excellent yields. The structures of 2 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 2).