Determination of pyridoxal‐5′‐phosphate (PLP)‐bonding sites in proteins: a peptide mass fingerprinting approach based on diagnostic tandem mass spectral features of PLP‐modified peptides

Peptides modified by pyridoxal‐5′‐phosphate (PLP), linked to a lysine residue via reductive amination, exhibit distinct spectral characteristics in the collision‐induced dissociation (CID) tandem mass (MS/MS) spectra that are described here. The MS/MS spectra typically display two dominant peaks whose m/z values correspond to neutral losses of [H₃PO₄] (?98 Da) and the PLP moiety as [C₈H₁₀NO₅P] (?231 Da) from the precursor peptide ion, respectively. Few other peaks are observed. Recognition of this distinct fragmentation behavior is imperative since determining sequences and sites of modifications relies on the formation of amide backbone cleavage products for subsequent interpretation via proteome database searching. Additionally, PLP‐modified peptides exhibit suppressed precursor ionization efficiency which diminishes their detection in complex mixtures. Presented here is a protocol which describes an enrichment strategy for PLP‐modified peptides combined with neutral loss screening and peptide mass fingerprinting to map the PLP‐bonding site in a known PLP‐dependent protein. This approach represents an efficient alternative to site‐directed mutagenesis which has been the traditional method used for PLP‐bonding site localization in proteins. Copyright © 2009 John Wiley & Sons, Ltd.     

High‐Throughput Proteomics Enabled by a Photocleavable Surfactant

Mass spectrometry (MS)‐based proteomics provides unprecedented opportunities for understanding the structure and function of proteins in complex biological systems; however, protein solubility and sample preparation before MS remain a bottleneck preventing high‐throughput proteomics. Herein, we report a high‐throughput bottom‐up proteomic method enabled by a newly developed MS‐compatible photocleavable surfactant, 4‐hexylphenylazosulfonate (Azo) that facilitates robust protein extraction, rapid enzymatic digestion (30 min compared to overnight), and subsequent MS‐analysis following UV degradation. Moreover, we developed an Azo‐aided bottom‐up method for analysis of integral membrane proteins, which are key drug targets and are generally underrepresented in global proteomic studies. Furthermore, we demonstrated the ability of Azo to serve as an “all‐in‐one” MS‐compatible surfactant for both top‐down and bottom‐up proteomics, with streamlined workflows for high‐throughput proteomics amenable to clinical applications.     

Global quantification of phosphoproteins combining metabolic labeling and gel‐based proteomics in B. pumilus

Differential proteomics targeting the protein abundance is commonly used to follow changes in biological systems. Differences in localization and degree of post‐translational modifications of proteins including phosphorylations are of tremendous interest due to the anticipated role in molecular regulatory processes. Because of their particular low abundance in prokaryotes, identification and quantification of protein phosphorylation is traditionally performed by either comparison of spot intensities on two‐dimensional gels after differential phosphoprotein staining or gel‐free by stable isotope labeling, sequential phosphopeptide enrichment and following LC‐MS analysis. In the current work, we combined in a proof‐of‐principle experiment these techniques using ¹⁴N/¹⁵N metabolic labeling with succeeding protein separation on 2D gels. The visualization of phosphorylations on protein level by differential staining was followed by protein identification and determination of phosphorylation sites and quantification by LC‐MS/MS. This approach should avoid disadvantages of traditional workflows, in particular the limited capability of peptide‐based gel‐free methods to quantify isoforms of proteins. Comparing control and stress conditions allowed for relative quantification in protein phosphorylation in Bacillus pumilus exposed to hydrogen peroxide. Altogether, we quantified with this method 19 putatively phosphorylated proteins.     

DNA‐Catalyzed Lysine Side Chain Modification

Catalyzing the covalent modification of aliphatic amino groups, such as the lysine (Lys) side chain, by nucleic acids has been challenging to achieve. Such catalysis will be valuable, for example, for the practical preparation of Lys‐modified proteins. We previously reported the DNA‐catalyzed modification of the tyrosine and serine hydroxy side chains, but Lys modification has been elusive. Herein, we show that increasing the reactivity of the electrophilic reaction partner by using 5′‐phosphorimidazolide (5′‐Imp) rather than 5′‐triphosphate (5′‐ppp) enables the DNA‐catalyzed modification of Lys in a DNA‐anchored peptide substrate. The DNA‐catalyzed reaction of Lys with 5′‐Imp is observed in an architecture in which the nucleophile and electrophile are not preorganized. In contrast, previous efforts showed that catalysis was not observed when Lys and 5′‐ppp were used in a preorganized arrangement. Therefore, substrate reactivity is more important than preorganization in this context. These findings will assist ongoing efforts to identify DNA catalysts for reactions of protein substrates at lysine side chains.     

Cysteine‐reactive covalent capture tags for enrichment of cysteine‐containing peptides

Considering the tremendous complexity and the wide dynamic range of protein samples from biological origin and their proteolytic peptide mixtures, proteomics largely requires simplification strategies. One common approach to reduce sample complexity is to target a particular amino acid in proteins or peptides, such as cysteine (Cys), with chemical tags in order to reduce the analysis to a subset of the whole proteome. The present work describes the synthesis and the use of two new cysteinyl tags, so‐called cysteine‐reactive covalent capture tags (C³T), for the isolation of Cys‐containing peptides. These bifunctional molecules were specifically designed to react with cysteines through iodoacetyl and acryloyl moieties and permit efficient selection of the tagged peptides. To do so, a thioproline was chosen as the isolating group to form, after a deprotection/activation step, a thiazolidine with an aldehyde resin by the covalent capture (CC) method. The applicability of the enrichment strategy was demonstrated on small synthetic peptides as well as on peptides derived from digested proteins. Mass spectrometric (MS) analysis and tandem mass spectrometric (MS/MS) sequencing confirmed the efficient and straightforward selection of the cysteine‐containing peptides. The combination of C³T and CC methods provides an effective alternative to reduce sample complexity and access low abundance proteins. Copyright © 2009 John Wiley & Sons, Ltd.     

Improved conditions for fluorescent staining of proteins with 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid in SDS‐PAGE

A simple and sensitive fluorescent staining method for the detection of proteins in SDS‐PAGE, namely IB (improved 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid) stain, is described. Non‐covalent hydrophobic probe 4,4′‐dianilino‐1,1′‐binaphthyl‐5,5′‐disulfonic acid was applied as a fluorescent dye, which can bind to hydrophobic sites in proteins non‐specifically. As low as 1 ng of protein band can be detected briefly by 30 min washing followed by 15 min staining without the aiding of stop or destaining step. The sensitivity of the new presented protocol is similar to that of SYPRO Ruby, which has been widely accepted in proteomic research. Comparative analysis of the MS compatibility of IB stain and SYPRO Ruby stain allowed us to address that IB stain is compatible with the downstream of protein identification by PMF.     

A Genetically Encoded,Phage‐Displayed Cyclic‐Peptide Library

Superior to linear peptides in biological activities, cyclic peptides are considered to have great potential as therapeutic agents. To identify cyclic‐peptide ligands for therapeutic targets, phage‐displayed peptide libraries in which cyclization is achieved by the covalent conjugation of cysteines have been widely used. To resolve drawbacks related to cysteine conjugation, we have invented a phage‐display technique in which its displayed peptides are cyclized through a proximity‐driven Michael addition reaction between a cysteine and an amber‐codon‐encoded N^?‐acryloyl‐lysine (AcrK). Using a randomized 6‐mer library in which peptides were cyclized at two ends through a cysteine–AcrK linker, we demonstrated the successful selection of potent ligands for TEV protease and HDAC8. All selected cyclic peptide ligands showed 4‐ to 6‐fold stronger affinity to their protein targets than their linear counterparts. We believe this approach will find broad applications in drug discovery.     

A Genetically Encoded,Phage‐Displayed Cyclic‐Peptide Library

Superior to linear peptides in biological activities, cyclic peptides are considered to have great potential as therapeutic agents. To identify cyclic‐peptide ligands for therapeutic targets, phage‐displayed peptide libraries in which cyclization is achieved by the covalent conjugation of cysteines have been widely used. To resolve drawbacks related to cysteine conjugation, we have invented a phage‐display technique in which its displayed peptides are cyclized through a proximity‐driven Michael addition reaction between a cysteine and an amber‐codon‐encoded N^?‐acryloyl‐lysine (AcrK). Using a randomized 6‐mer library in which peptides were cyclized at two ends through a cysteine–AcrK linker, we demonstrated the successful selection of potent ligands for TEV protease and HDAC8. All selected cyclic peptide ligands showed 4‐ to 6‐fold stronger affinity to their protein targets than their linear counterparts. We believe this approach will find broad applications in drug discovery.     

Arylfluorosulfate‐Based Electrophiles for Covalent Protein Labeling: A New Addition to the Arsenal

Selective covalent modification of a targeted protein is a powerful tool in chemical biology and drug discovery, with applications ranging from identification and characterization of proteins and their functions to the development of targeted covalent inhibitors. Most covalent ligands contain an affinity motif and an electrophilic warhead that reacts with a nucleophilic residue of the targeted protein. Because the electrophilic warhead is prone to react and modify off‐target nucleophiles, its reactivity should be balanced carefully to maximize target selectivity. Arylfluorosulfates have recently emerged as latent electrophiles for selective labeling of context‐specific tyrosine and lysine residues in protein pockets. Here, we review the recent but intense introduction of arylfluorosulfates into the arsenal of available warheads for selective covalent modification of proteins. We highlight the untapped potential of this functional group for use in chemical biology and drug discovery.     

Polymeric Micelles Loading Proteins through Concurrent Ion Complexation and pH‐Cleavable Covalent Bonding for In Vivo Delivery

Protein drugs have great potential as targeted therapies, yet their application suffers from several drawbacks, such as instability, short half‐life, and adverse immune responses. Thus, protein delivery approaches based on stimuli‐responsive nanocarriers can provide effective strategies for selectively enhancing the availability and activation of proteins in targeted tissues. Herein, polymeric micelles with the ability of encapsulating proteins are developed via concurrent ion complexation and pH‐cleavable covalent bonding between proteins and block copolymers directed to pH‐triggered release of the protein payload. Carboxydimethylmaleic anhydride (CDM) is selected as the pH‐sensitive moiety, since the CDM? amide bond is stable at physiological pH (pH 7.4), while it cleaves at pH 6.5, that is, the pathophysiological pH of tumors and inflammatory tissues. By using poly(ethylene glycol)‐poly(l ‐lysine) block copolymers having 45% CDM addition, different proteins with various sizes and isoelectric points are loaded successfully. By using myoglobin‐loaded micelles (myo/m) as a model, the stability of the micelles in physiological conditions and the dissociation and release of functional myoglobin at pH 6.5 are successfully confirmed. Moreover, myo/m shows extended half‐life in blood compared to free myoglobin and micelles assembled solely by polyion complex, indicating the potential of this system for in vivo delivery of proteins.     

Identification and characterization of cysteinyl exposure in proteins by selective mercury labeling and nano‐electrospray ionization quadrupole time‐of‐flight mass spectrometry

We describe a method for probing surface‐exposed cysteines in proteins by selective labeling with p‐hydroxymercuribenzoate (PMB) combined with nano‐electrospray ionization mass spectrometric analysis (nanoESI‐MS). The rapid, stoichiometric, and specific labeling by PMB of surface‐exposed cysteines allows for characterization of the accessibility of the cysteines using a single MS analysis. Moreover, by taking advantage of the large mass shift of 321 Da, unique isotopic pattern, and enhanced MS signal of PMB‐labeled cysteine‐containing peptide fragments, the surface‐exposed cysteines in proteins can be accurately identified by peptide mapping. The number and sites of reactive cysteines on the surface of human and rat hemoglobins (hHb and rHb) were identified as examples. Collision‐induced dissociation tandem mass spectrometric (MS/MS) analysis of specific peptides further confirmed the selective labeling of PMB in hHb. The subtle difference between the different cysteine residues in rHb was also evaluated by multiple PMB titrations. The difference between the two cysteines in their environment may partially explain their reaction specificity. Cysteine 125 in the β unit of rHb is exposed on the surface, explaining its reactivity with glutathione. Cysteine 13 in the α subunit of rHb is much less exposed, and is located in a hydrophobic pocket, a conclusion that is consistent with the previous observation of its selective binding with dimethylarsinous acid, a reactive arsenic metabolite. The method is potentially useful for probing cysteines in other biologically important proteins and for studying proteins that are associated with conformational or structural changes induced by denaturing processes, protein modifications, protein‐protein interactions and protein assemblies. Copyright © 2010 John Wiley & Sons, Ltd.     

Dansyl‐peptides matrix‐assisted laser desorption/ionization mass spectrometric (MALDI‐MS) and tandem mass spectrometric (MS/MS) features improve the liquid chromatography/MALDI‐MS/MS analysis of the proteome

Peptide tagging is a useful tool to improve matrix‐assisted laser desorption/ionization tandem mass spectrometric (MALDI‐MS/MS) analysis. We present a new application of the use of the dansyl chloride (DNS‐Cl). DNS‐Cl is a specific primary amine reagent widely used in protein biochemistry. It adds a fluorescent dimethylaminonaphthalene moiety to the molecule. The evaluation of MALDI‐MS and MS/MS analyses of dansylated peptides shows that dansylation raises the ionization efficiency of the most hydrophilic species compared with the most hydrophobic ones. Consequently, higher Mascot scores and protein sequence coverage are obtained by combining MS and MS/MS data of native and tagged samples. The N‐terminal DNS‐Cl sulfonation improves the peptide fragmentation and promotes the generation of b‐fragments allowing better peptide sequencing. In addition, we set up a labeling protocol based on the microwave chemistry. Peptide dansylation proved to be a rapid and cheap method to improve the performance of liquid chromatography (LC)/MALDI‐MS/MS analysis at the proteomic scale in terms of peptide detection and sequence coverage. Copyright © 2010 John Wiley & Sons, Ltd.     

Study of the noncovalent interactions of ginsenosides and amyloid‐β‐peptide by CSI‐MS and molecular docking

Noncovalent interactions between drugs and proteins play significant roles for drug metabolisms and drug discoveries. Mass spectrometry has been a commonly used method for studying noncovalent interactions. However, the harsh ionization process in electrospray ionization mass spectrometry (ESI‐MS) is not conducive to the preservation of noncovalent and unstable biomolecular complexes compared with the cold spray ionization mass spectrometry (CSI‐MS). A cold spray ionization providing a stable solvation‐ionization at low temperature is milder than ESI, which was more suitable for studying noncovalent drug‐protein complexes with exact stoichiometries. In this paper, we apply CSI‐MS to explore the interactions of ginsenosides toward amyloid‐β‐peptide (Aβ) and clarify the therapeutic effect of ginsenosides on Alzheimer's disease (AD) at the molecular level for the first time. The interactions of ginsenosides with Aβ were performed by CSI‐MS and ESI‐MS, respectively. The ginsenosides Rg1 bounded to Aβ at the stoichiometries of 1:1 to 5:1 could be characterized by CSI‐MS, while dehydration products are more readily available by ESI‐MS. The binding force depends on the number of glycosyls and the type of ginsenosides. The relative binding affinities were sorted in order as follows: Rg1 ≈ Re > Rd ≈ Rg2 > Rh2, protopanaxatriol by competition experiments, which were supported by molecular docking experiment. CSI‐MS is expected to be a more appropriate approach to determine the weak but specific interactions of proteins with other natural products especially polyhydroxy compounds.     

Analysis of monoclonal antibody by a novel CE‐UV/MALDI‐MS interface

mAbs are highly complex proteins that present a wide range of microheterogeneity that requires multiple analytical methods for full structure assessment and quality control. As a consequence, the characterization of mAbs on different levels is particularly product‐ and time‐consuming. CE‐MS couplings, especially to MALDI, appear really attractive methods for the characterization of biological samples. In this work, we report the last instrumental development and performance of the first totally automated off‐line CE‐UV/MALDI‐MS/MS. This interface is based on the removal of the original UV cell of the CE apparatus, modification of the spotting device geometry, and creation of an integrated delivery matrix system. The performance of the method was evaluated with separation of five intact proteins and a tryptic digest mixture of nine proteins. Intact protein application shows the acquisition of electropherograms with high resolution and high repeatability. In the peptide mapping approach, a total number of 154 unique identified peptides were characterized using MS/MS spectra corresponding to average sequence coverage of 64.1%. Comparison with NanoLC/MALDI‐MS/MS showed complementarity at the peptide level with an increase of 42% when using CE/MALDI‐MS coupling. Finally, this work represents the first analysis of intact mAb charge variants by CZE using an MS detection. Moreover, using a peptide mapping approach CE‐UV/MALDI‐MS/MS fragmentation allowed 100% sequence coverage of the light chain and 92% of the heavy chain, and the separation of four major glycosylated peptides and their structural characterization.     

Squaric Acid Mediated Chemoselective PEGylation of Proteins: Reactivity of Single‐Step‐Activated α‐Amino Poly(ethylene glycol)s

The covalent attachment of poly(ethylene glycol) (PEG) to therapeutically active proteins (PEGylation) has become an important method to deal with the pharmacological difficulties of these polypeptides, such as short body‐residence times and immunogenicity. However, the derivatives of PEG used for PEGylation lack further functional groups that would allow the addition of targeting or labeling moieties. Squaric acid diethyl ester was used for the chemoselective single‐step activation of poly(ethylene glycol)s into the respective ester amides. The resultant selective protein‐reactive poly(ethylene glycol)s were investigated with respect to their selectivity towards amino acid residues in bovine serum albumin (as a model protein). The presented procedure relies on a robust two‐step protocol and was found to be selective towards lysine residues; the activated polyethers are efficient and stoichiometric PEGylation agents with a remarkable hydrolytic stability over a period of several days. By adjusting the pD value of the conjugation mixture, the chemoselectivity of the activated PEGs towards the α‐ and ε‐amino groups of lysine methyl ester was effectively changed.     

Identification of carbonylation sites in apomyoglobin after exposure to 4‐hydroxy‐2‐nonenal by solid‐phase enrichment and liquid chromatography–electrospray ionization tandem mass spectrometry

Identification of protein carbonylation because of covalent attachment of a lipid peroxidation end‐product was performed by combining proteolytic digestion followed by solid‐phase hydrazide enrichment and liquid chromatography (LC)–electrospray ionization (ESI) tandem mass spectrometry (MS/MS) using both collision‐induced dissociation (CID) and electron capture dissociation (ECD). To evaluate this approach, we selected apomyoglobin and 4‐hydroxy‐2‐nonenal (4‐HNE) as a model protein and a representative end‐product of lipid peroxidation, respectively. Although the characteristic elimination of 4‐HNE (156 Da) in CID was found to serve as a signature tag for the modified peptides, generation of nearly complete fragment ion series because of efficient peptide backbone cleavage (in most cases over 75%) and the capability to retain the labile 4‐HNE moiety of the tryptic peptides significantly aided the elucidation of primary structural information and assignment of exact carbonylation sites in the protein, when ECD was employed. We have concluded that solid‐phase enrichment with both CID‐ and ECD‐MS/MS are advantageous during an in‐depth interrogation and unequivocal localization of 4‐HNE‐induced carbonylation of apomyoglobin that occurs via Michael addition to its histidine residues. Copyright © 2010 John Wiley & Sons, Ltd.     

Separation with zwitterionic hydrophilic interaction liquid chromatography improves protein identification by matrix‐assisted laser desorption/ionization‐based proteomic analysis

Comprehensive proteomic analyses necessitate efficient separation of peptide mixtures for the subsequent identification of proteins by mass spectrometry (MS). However, digestion of proteins extracted from cells and tissues often yields complex peptide mixtures that confound direct comprehensive MS analysis. This study investigated a zwitterionic hydrophilic interaction liquid chromatography (ZIC‐HILIC) technique for the peptide separation step, which was verified by subsequent MS analysis. Human serum albumin (HSA) was the model protein used for this analysis. HSA was digested with trypsin and resolved by ZIC‐HILIC or conventional strong cation exchange (SCX) prior to MS analysis for peptide identification. Separation with ZIC‐HILIC significantly improved the identification of HSA peptides over SCX chromatography. Detailed analyses of the identified peptides revealed that the ZIC‐HILIC has better peptide fractionation ability. We further demonstrated that ZIC‐HILIC is useful for quantitatively surveying cell surface markers specifically expressed in undifferentiated embryonic stem cells. These results suggested the value of ZIC‐HILIC as a novel and efficient separation method for comprehensive and quantitative proteomic analyses. Copyright © 2009 John Wiley & Sons, Ltd.     

2‐Oxazoline Formation for Selective Chemical Labeling of 5‐Hydroxylysine

Hydroxylation of lysine, one of posttranslational modifications of proteins, generates 5‐hydroxylysine (Koh) and plays a crucial role in regulating protein functions in cellular activity. We have developed a chemical labeling method of Koh. The 1,2‐aminoalcohol moiety of Koh in synthetic peptide sequences was trapped by an alkyne‐containing benzimidate to form a 2‐oxazoline ring. An additional ammonia treatment process removed the undesirable amidine residue formed between benzimidate and lysine. During the ammonia treatment, the oxazoline residue formed at Koh mainly remained intact, and the ring opening to the amide form was observed for only part of oxazoline, indicating that the chemical labeling is amino acid selective. Azide‐substituted biotin or fluorescent dye was attached to the peptide through Huisgen cycloaddition at Koh and converted into an alkyne‐labeled oxazoline form. The Koh‐labeling assay could provide a platform to enhance proteomic research of lysine hydroxylation.     

Glycation sites in neoglycoglycoconjugates from the terminal monosaccharide antigen of the O‐PS of Vibrio cholerae O1, serotype Ogawa,and BSA revealed by matrix‐assisted laser desorption–ionization tandem mass spectrometry

We present the MALDI‐TOF/TOF‐MS analyses of various hapten–bovine serum albumin (BSA) neoglycoconjugates obtained by squaric acid chemistry coupling of the spacer‐equipped, terminal monosaccharide of the O‐specific polysaccharide of Vibrio cholerae O1, serotype Ogawa, to BSA. These analyses allowed not only to calculate the molecular masses of the hapten–BSA neoglycoconjugates with different hapten–BSA ratios (4.3, 6.6 and 13.2) but, more importantly, also to localize the covalent linkages (conjugation sites) between the hapten and the carrier protein. Determination of the site of glycation was based on comparison of the MALDI‐TOF/TOF‐MS analysis of the peptides resulting from the digestion of BSA with similar data resulting from the digestion of BSA glycoconjugates, followed by sequencing by MALDI‐TOF/TOF‐MS/MS of the glycated peptides. The product‐ion scans of the protonated molecules were carried out with a MALDI‐TOF/TOF‐MS/MS tandem mass spectrometer equipped with a high‐collision energy cell. The high‐energy collision‐induced dissociation (CID) spectra afforded product ions formed by fragmentation of the carbohydrate hapten and amino acid sequences conjugated with fragments of the carbohydrate hapten. We were able to identify three conjugation sites on lysine residues (Lys235, Lys437 and Lys455). It was shown that these lysine residues are very reactive and bind lysine specific reagents. We presume that these Lys residues belong to those that are considered to be sterically more accessible on the surface of the tridimensional structure. The identification of the y‐series product ions was very useful for the sequencing of various peptides. The series of a‐ and b‐product ions confirmed the sequence of the conjugated peptides. Copyright © 2010 John Wiley & Sons, Ltd.