Salicylaldoxime‐functionalized poly(ethylene glycol)‐bridged dicationic ionic liquid ([salox‐PEG1000‐DIL][BF4]) as a novel ligand for palladium‐catalyzed Suzuki–Miyaura reaction in water

Two novel salicylaldoxime‐functionalized poly(ethylene glycol)‐bridged dicationic ionic liquids ([salox‐PEG₁₀₀₀‐DIL][BF₄] and [salox‐PEG₁₀₀₀‐DIL][PF₆]) were prepared and characterized. [salox‐PEG₁₀₀₀‐DIL][BF₄] was found to be an efficient and recyclable ligand for palladium‐catalyzed Suzuki–Miyaura reaction in water. The catalytic system could be easily recovered and reused for at least five runs only with slight decrease in its activity. Copyright © 2013 John Wiley & Sons, Ltd.     

8‐Hydroxyquinoline Functionalized PEG‐1000 Bridged Dicationic Ionic Liquid as a Novel Ligand for Copper‐catalyzed N‐Arylation of Imidazoles

A novel 8‐hydroxyquinoline functionalized PEG‐1000 bridged dicationic ionic liquid ([HQ‐PEG₁₀₀₀‐DIL][BF₄]) was synthesized and characterized. It was applied as an efficiently recyclable ligand for copper‐catalyzed N‐arylation of nitrogen‐containing heterocycles with aryl halides. The catalytic system could be easily recovered and reused for at least five runs without obvious loss of catalytic activity.     

Aerobic and Electrochemical Oxidative Cross‐Dehydrogenative‐Coupling (CDC) Reaction in an Imidazolium‐Based Ionic Liquid

The ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate [BMIm][BF₄] has demonstrated high efficiency when applied as a solvent in the oxidative nitro‐Mannich carbon? carbon bond formation. The copper‐catalyzed cross‐dehydrogenative coupling (CDC) between N‐phenyltetrahydroisoquinoline and nitromethane in [BMIm][BF₄] occurred with high yield under the described reaction conditions. Both the ionic liquid and copper catalyst were recycled nine times with almost no lost of activity. The electrochemical behavior of the tertiary amine substrate and β‐nitroamine product was investigated employing [BMIm][BF₄] as electrolyte solvent. The potentiostatic electrolysis in ionic liquid afforded the desired product with a high yield. This result and the cyclic voltammetric investigation provide a better understanding of the reaction mechanism, which involves radical and iminium cation intermediates.     

Supramolecular Ionic‐Liquid Gels with High Ionic Conductivity

Supramolecular ionogels were prepared by the gelation of room‐temperature ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]) with (S,S)‐bis(leucinol)oxalamide. Remarkably, the ionic conductivity of solutions and ionogels with low gelator concentrations is higher than that of neat [BMIm][BF₄]. On the basis of molecular dynamics simulations and quantum mechanical calculations, the origin of this phenomenon is attributed to the higher affinity of gelator molecules towards [BF₄]^? ions, which reduces the electrostatic attraction between [BMIm]⁺ and [BF₄]^? and thus increases their mobility. With increasing gelator concentration, the ionic conductivity decreases due to the formation of a denser gelator matrix, which hinders the pathways for ionic transport. However, even for very dense ionogels, this decrease is less than one order of magnitude relative to neat [BMIm][BF₄], and thus they can be classified as highly conductive materials with strong potential for application as functional electrolytes.     

Studies on calcium‐containing poly(urethane ether)s

The calcium salt of mono(hydroxyethoxyethyl)phthalate [Ca(HEEP)₂] was synthesized by the reaction of diethylene glycol, phthalic anhydride, and calcium acetate. Calcium‐containing poly(urethane ether)s (PUEs) were synthesized by the reaction of hexamethylene diisocyanate (HMDI) or tolylene 2,4‐diisocyanate (TDI) with a mixture of Ca(HEEP)₂ and poly(ethylene glycol) (PEG₃₀₀ or PEG₄₀₀) with di‐n‐butyltin dilaurate as a catalyst. A series of calcium‐containing PUEs of different compositions were synthesized with Ca(HEEP)₂/PEG₃₀₀ (or PEG₄₀₀)/diisocyanate (HMDI or TDI) molar ratios of 2:2:4, 3:1:4, and 1:3:4 so that the coating properties of the PUEs could be studied. Blank PUEs without calcium‐containing ionic diols were also prepared by the reaction of PEG₃₀₀ or PEG₄₀₀ with HMDI or TDI. The PUEs were well characterized by Fourier transform infrared, ¹H and ¹³C NMR, solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR, viscosity, solubility, and X‐ray diffraction studies. The thermal properties of the polymers were also studied with thermogravimetric analysis and differential scanning calorimetry. The PUEs were applied as top coats on acrylic‐coated leather, and their physicomechanical properties were also studied. The coating properties of PUEs, such as the tensile strength, elongation at break, tear strength, water vapor permeability, flexing endurance, cold crack resistance, abrasion resistance, color fastness, and adhesive strength, were better than the standard values. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2865–2878, 2003     

Enzymatic ring‐opening polymerization of ε‐caprolactone by Yarrowia lipolytica lipase in ionic liquids

Yarrowia lipolytica (YLL), Candida rugosa (CRL), and porcine pancreatic lipase (PPL) were employed successfully as catalysts in the enzymatic ring‐opening polymerization (ROP) of ε‐caprolactone in the presence of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM][BF₄]), 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIM][BF₄]), 1‐butylpyridinium tetrafluoroborate ([BuPy][BF₄]), 1‐butylpyridinium trifluoroacetate ([BuPy][CF₃COO]), 1‐ethyl‐3‐methylimidazolium nitrate ([EMIM][NO₃]) ionic liquids. Poly(ε‐caprolactone)s (PCLs) with molecular weights (M_n) in the range of 300–9000 Da were obtained. ¹H‐ and ¹³C‐NMR analyses on PCLs formed by YLL, CRL, and PPL showed asymmetric telechelic α‐hydroxy‐ω‐carboxylic acid end groups. Differences between CP‐MAS and MAS spectra are observed and discussed in terms of morphology. MALDI‐TOF spectra show the formation of at least seven species. Differential scanning calorimetry (DSC) and Wide Angle X‐Ray Scattering (WAXS) results demonstrate the high degree of crystallinity present in all the polyesters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5792–5805, 2009     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

ARGET ATRP of acrylonitrile with ionic liquid as reaction media and 1,1,4,7,7‐pentamethyldiethylenetriamine as both ligand and reducing agent in the presence of air

[C₁₂mim][BF₄], [C₈mim][BF₄], and [C₄mim][BF₄] were first applied as reaction media for atom transfer radical polymerization using activators regenerated by electron transfer (ARGET ATRP) of acrylonitrile (AN) with 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as both ligand and reducing agent in the presence of air. The rate of polymerization in [C₁₂mim][BF₄] was considerably faster than in [C₈mim][BF₄] and [C₄mim][BF₄]. ARGET ATRP of AN in [C₁₂mim][BF₄] were better controlled than in [C₈mim][BF₄] and [C₄mim][BF₄] under the same experimental conditions. With an increase in the content of PMDETA, the polymerization provided an accelerated reaction rate and a broader polymer molecular weight distribution. A slow polymerization rate and a broad polydispersity index were observed using TMEDA instead of PMDETA as both ligand and reducing agent. There was an obvious induction period with CuCl₂ instead of CuBr₂ as catalyst. Well‐defined PAN‐b‐PMMA with higher molecular weight at 104,560 and relatively broader distribution at 1.35 was successfully prepared with PAN as macroinitiator via ARGET ATRP in [C₁₂mim][BF₄] in the presence of air. The resultant fibers were obtained with the fineness at 1.17dtex and the tenacity at 6.03cN · dtex^?1. Copyright © 2010 John Wiley & Sons, Ltd.     

Effects of additives and post‐treatment on the thermoelectric performance of vapor‐phase polymerized PEDOT films

Vapor‐phase polymerization (VPP) is an important method for the fabrication of high‐quality conducting polymers, especially poly(3,4‐ethylenedioxythiophene) (PEDOT). In this work, the effects of additives and post‐treatment solvents on the thermoelectric (TE) performance of VPP‐PEDOT films were systematically investigated. The use of 1‐butyl‐3‐menthylinidazolium tetrafluoroborate ([BMIm][BF₄], an ionic liquid) was shown to significantly enhance the electrical conductivity of VPP‐PEDOT films compared with other additives. The VPP‐PEDOT film post‐treated with mixed ethylene glycol (EG)/[BMIm][BF₄] solvent displayed the high power factor of 45.3 μW m^?1 K^?2 which is 122% higher than that prepared without any additive or post‐treatment solvent, along with enhanced electrical conductivity and Seebeck coefficient. This work highlighted the superior effect of the [BMIm][BF₄] additive and the EG/[BMIm][BF₄] solvent post‐treatment on the TE performance of the VPP‐PEDOT film. These results should help with developing the VPP method to fabricate high‐performance PEDOT films. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1738–1744     

Synthesis and application of a chiral ionic liquid functionalized β‐cyclodextrin as a chiral selector in capillary electrophoresis

A novel chiral ionic liquid functionalized β‐cyclodextrin, 6‐O‐2‐hydroxpropyltrimethylammonium‐β‐cyclodextrin tetrafluoroborate ([HPTMA‐β‐CD][BF₄]), was synthesized and used as a chiral selector in capillary electrophoresis. [HPTMA‐β‐CD][BF₄] not only increased the solubility in aqueous buffer in comparison with the parent compound, but also provided a stable reversal electroosmotic flow, and the enantioseparation of eight chiral drugs was examined in phosphate buffer containing [HPTMA‐β‐CD][BF₄] as the chiral selector. The effects of the [HPTMA‐β‐CD][BF₄] concentration and the background electrolyte pH were studied. Moreover, the chiral separation abilities of β‐CD and [HPTMA‐β‐CD][BF₄] were compared and possible mechanisms for the chiral recognition of [HPTMA‐β‐CD][BF₄] are discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

Redox‐Switchable Ring‐Closing Metathesis: Catalyst Design,Synthesis, and Study

High yielding syntheses of 1‐(ferrocenylmethyl)‐3‐mesitylimidazolium iodide ( 1 ) and 1‐(ferrocenylmethyl)‐3‐mesitylimidazol‐2‐ylidene ( 2 ) were developed. Complexation of 2 to [{Ir(cod)Cl}₂] (cod=cis,cis‐1,5‐cyclooctadiene) or [Ru(PCy₃)Cl₂(?CH‐o‐O‐iPrC₆H₄)] (Cy=cyclohexyl) afforded 3 ([Ir( 2 )(cod)Cl]) and 5 ([Ru( 2 )Cl₂(?CH‐o‐O‐iPrC₆H₄)]), respectively. Complex 4 ([Ir( 2 )(CO)₂Cl]) was obtained by bubbling carbon monoxide through a solution of 3 in CH₂Cl₂. Spectroelectrochemical IR analysis of 4 revealed that the oxidation of the ferrocene moiety in 2 significantly reduced the electron‐donating ability of the N‐heterocyclic carbene ligand (ΔTEP=9 cm^?1; TEP=Tolman electronic parameter). The oxidation of 5 with [Fe(η⁵‐C₅H₄COMe)Cp][BF₄] as well as the subsequent reduction of the corresponding product [ 5 ][BF₄] with decamethylferrocene (Fc*) each proceeded in greater than 95 % yield. Mössbauer, UV/Vis and EPR spectroscopy analysis confirmed that [ 5 ][BF₄] contained a ferrocenium species, indicating that the iron center was selectively oxidized over the ruthenium center. Complexes 5 and [ 5 ][BF₄] were found to catalyze the ring‐closing metathesis (RCM) of diethyl diallylmalonate with observed pseudo‐first‐order rate constants (k_obs) of 3.1×10^?4 and 1.2×10^?5 s^?1, respectively. By adding suitable oxidants or reductants over the course of a RCM reaction, complex 5 was switched between different states of catalytic activity. A second‐generation N‐heterocyclic carbene that featured a 1′,2′,3′,4′,5′‐ pentamethylferrocenyl moiety ( 10 ) was also prepared and metal complexes containing this ligand were found to undergo iron‐centered oxidations at lower potentials than analogous complexes supported by 2 (0.30–0.36 V vs. 0.56–0.62 V, respectively). Redox switching experiments using [Ru( 10 )Cl₂(?CH‐o‐O‐iPrC₆H₄)] revealed that greater than 94 % of the initial catalytic activity was restored after an oxidation–reduction cycle.     

A Dicationic Ruthenium Alkylidene Complex for Continuous Biphasic Metathesis Using Monolith‐Supported Ionic Liquids

A dicationic ruthenium–alkylidene complex [Ru(dmf)₃(IMesH₂)(?CH‐2‐(2‐PrO)‐C₆H₄)][(BF₄)₂] ( 1 ; IMesH₂=1,3‐dimesitylimidazolin‐2‐ylidene) has been prepared and used in continuous metathesis reactions by exploiting supported ionic‐liquid phase (SILP) technology. For these purposes, ring‐opening metathesis polymerization (ROMP)‐derived monoliths were prepared from norborn‐2‐ene, tris(norborn‐5‐ene‐2‐ylmethyloxy)methylsilane, and [RuCl₂(PCy₃)₂(CHPh)] (Cy=cyclohexyl) in the presence of 2‐propanol and toluene and surface grafted with norborn‐5‐en‐2‐ylmethyl‐N,N,N‐trimethylammonium tetrafluoroborate ([NBE‐CH₂‐NMe₃][BF₄]). Subsequent immobilization of the ionic liquid (IL), 1‐butyl‐2,3‐dimethylimidazolium tetrafluoroborate ([BDMIM][BF₄]), containing ionic catalyst 1 created the SILP catalyst. The use of a second liquid transport phase, which contained the substrate and was immiscible with the IL, allowed continuous metathesis reactions to be realized. High turnover numbers (TONs) of up to 3700 obtained in organic solvents for the ring‐closing metathesis (RCM) of, for example, N,N‐diallyltrifluoroacetamide, diethyl diallylmalonate, diethyl di(methallyl)malonate, tert‐butyl‐N,N‐diallylcarbamate, N,N‐diallylacetamide, diphenyldiallylsilane, and 1,7‐octadiene, as well as in the self‐metathesis of methyl oleate, could be further increased by using biphasic conditions with [BDMIM][BF₄]/heptane. Under continuous SILP conditions, TONs up to 900 were observed. Due to the ionic character of the initiator, catalyst leaching into the transport phase was very low (<0.1 %). Finally, the IL can, together with decomposed catalyst, be removed from the monolithic support by flushing with methanol. Upon reloading with [BDMIM][BF₄]/ 1 , the recycled support material again qualified for utilization in continuous metathesis reactions.     

Hydrogen‐transfer reduction of α,β‐unsaturated carbonyl compounds catalyzed by naphthyridine‐functionalized N‐heterocyclic carbene complexes

Substitution of silver complex of 2‐chloro‐7‐(mesitylimidazolylidenylmethyl)naphthyridine (NpNHC) with palladium(II), rhodium(I) and iridium(I) metal precursors provided [Pd(C ,N ‐NpNHC)(η³‐allyl)](BF₄) ( 5 ), RhCl(COD)(C ‐NpNHC) ( 6a ) and IrCl(COD)(C ‐NpNHC) ( 6b ), respectively. Abstraction of chloride from 6a and 6b with AgBF₄ provided the chelation complexes [Rh(COD)(C ,N ‐NpNHC)](BF₄) ( 7a ) and Ir(COD)(C ,N ‐NpNHC)(BF₄) ( 7b ), respectively. All complexes were characterized using NMR and elemental analyses and the structural details of 5 and 6a were further confirmed using X‐ray crystallography. In catalytic activity studies, complex 5 was found to be an effective catalyst in the hydrogen‐transfer reduction of α,β‐unsaturated carbonyl compounds into the corresponding saturated carbonyl compounds.     

Ionic liquid‐based ultrasound‐assisted extraction of fangchinoline and tetrandrine from Stephaniae tetrandrae

An ionic liquid‐based ultrasound‐assisted extraction method has been developed for the effective extraction of fangchinoline and tetrandrine from Stephaniae tetrandrae. The effects of some ultrasound‐assisted extraction parameters including the concentration of [BMIM][BF₄], pH, ultrasonic power and time were investigated to optimize the ultrasound‐assisted extraction conditions. Compared to the regular ultrasound‐assisted extraction and traditional refluent extraction, the proposed [BMIM][BF₄]‐based ultrasound‐assisted extraction offered shorter extraction times (from 6 h to 40 min) and remarkable higher efficiencies (approximately 30% improved), which supported the suitability of the proposed approach. In addition, the proposed approach was confirmed by the good correlation coefficient (R²), recovery and reproducibility (RSD, n = 5), which were in the range of 0.9992–0.9995, 85.5–101.1%, and 1.87–4.33%, respectively.     

Polarity Behaviour and Specific Interactions of Imidazolium‐Based Ionic Liquids in Ethylene Glycol

The molecular interactions of the ionic liquids (ILs) 1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄], 3‐methyl‐1‐octylimidazolium tetrafluoroborate [C₈mim][BF₄] and 1‐butyl‐3‐methylimidazolium octylsulfate [C₄mim][C₈OSO₃] are investigated in ethylene glycol (EG) over the whole mole fraction range using fluorescence (steady‐state and time‐resolved), Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. The cybotactic region surrounding the pyrene fluorescent probe exhibits peculiar characteristics for different ILs in the EG‐rich region. The extent of solute–solvent interactions is assessed by determining the deviations of experimentally observed vibronic band intensity ratios of peak 1 to peak 3 of pyrene fluorescence (I₁/I₃) from a composite I₁/I₃ value obtained using a preferential solvation model. A distinct vibrational frequency shift for various stretching modes of EG (O? H) or ILs (C? H of ring protons, B? F and S?O of anions) indicates specific interactional preferences of EG toward the IL protons/anion. Splitting of the O? H vibration band of EG at 3000–3700 cm^?1 into three separate bands, and analysis of the changes in location and area of these bands as a function of concentration enable precise determination of the effect of ILs on hydrogen bridges of EG. NMR chemical shifts and their deviations from ideality show multiple hydrogen‐bonding interactions of varying strengths between unlike molecules in the mixtures. A comparison of spectroscopic results with thermodynamic properties shows that the mixing microscopic behaviour of the investigated systems is completely different from the macroscopic behaviour, which is primarily governed by the difference in shape, size and nature of the molecules.     

Reverse ATRP process of acrylonitrile in the presence of ionic liquids

An ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), was first used as the solvent in azobisisobutyronitrile (AIBN)‐initiated reverse atom transfer radical polymerization (RATRP) of acrylonitrile with FeCl₃/succinic acid (SA) as the catalyst system. The polymerization in [C₄mim][BF₄] proceeded in a well‐controlled manner as evidenced by kinetic studies. Compared with the polymerization in bulk, the polymerization in [C₄mim][BF₄] not only showed the best control of molecular weight and its distribution but also provided rather rapid reaction rate with the ratio of [C₄mim][BF₄] at 200:1:2:4. The polymerization apparent activation energies in [C₄mim][BF₄] and bulk were calculated to be 48.2 and 55.7 kJ mol^?1, respectively. Polyacrylonitrile obtained was successfully used as a macroinitiator to proceed the chain extension polymerization in [C₄mim][BF₄] via a conventional ATRP process. [C₄mim][BF₄] and the catalyst system could be easily recycled and reused after simple purification and had no effect on the living nature of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2701–2707, 2008     

Synthesis and Theoretical Investigation of a 1,8‐Bis(bis(diisopropylamino)cyclopropeniminyl)naphthalene Proton Sponge Derivative

We report herein the synthesis and characterization of a new proton sponge derivative, 1,8‐bis(bis(diisopropylamino)cyclopropeniminyl)naphthalene 4 (DACN), as well as its bis‐protonated counterpart 6 . A crystal structure of 6 is presented, along with variable temperature ¹H NMR data on the BF₄^? salt ( 6?BF₄ ). DFT calculations were performed to investigate the structure of the monoprotonated species 7 and to gain insight into the structural and electronic nature of all three species. The proton affinity (PA) of 4 , calculated at the B3LYP/6‐311G++(d,p)//B3LYP/6‐31G(d,p) level, taking into account thermal corrections from the B3LYP/6‐31G(d,p) method, was 282.3 kcal mol^?1, while its pK_a was estimated at 27.0. NICS calculations were performed to examine the changes in aromaticity within these systems upon each successive protonation. Lastly, homodesmotic reaction schemes were used in order to estimate the factors contributing to the strong PA predicted for 4 .     

Atom transfer radical polymerization using activators regenerated by electron transfer of acrylonitrile in 1‐(1‐ethoxycarbonylethyl)‐3‐methylimidazolium hexafluorophospate

Atom transfer radical polymerization using activators regenerated by electron transfer (ARGET ATRP) of acrylonitrile (AN) was first approached with 1‐(1‐ethoxycarbonylethyl)‐3‐methylimidazolium tetrafluoroborate ([ecemim][BF₄]) as reaction medium and tin(II) bis(2‐ethylhexanoate) (Sn(EH)₂) as reducing agent in the presence of air. When compared with in bulk, an obvious increase of polymer isotacticity was observed for ARGET ATRP of AN in 1‐(1‐ethoxycarbonylethyl)‐3‐methylimidazolium hexafluorophospate ([ecemim][PF₆]), the reaction rate of ARGET ATRP of AN in [ecemim][PF₆] was higher and the polymerization process was better controlled. The block copolymer polyacrylonitrile‐block‐poly(methyl methacrylate) with molecular weight at 69,750, distribution at 1.34, and isotacticity at 0.36 was successfully obtained in [ecemim][PF₆]. [Ecemim][PF₆] and the catalyst system were recycled and reused and had no effect on the living nature of polymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Bimodal molecular weight distribution of poly(styrene‐co‐acrylonitrile) formed by conventional free‐radical copolymerization of acrylonitrile and styrene in room temperature ionic liquids

Conventional free‐radical copolymerization of acrylonitrile (AN) and styrene (St) was realized in room temperature ionic liquids (RTILs), 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([Bmim][BF₄]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([Bmim][PF₆]), under mild conditions. The copolymerization in RTILs was more rapid than that in traditional solvent DMF. Poly(styrene‐co‐acrylonitrile) (SAN) prepared in RTILs had higher molecular weight than that prepared in DMF or by bulk copolymerization. SAN with bimodal molecular weight distribution (MWD) were obtained in most of the reaction conditions in [Bmim][BF₄] and some conditions in [Bmim][PF₆]. By the analysis of reaction phenomena and fluorescence behavior, the reason of the difference in MWD could be attributed to the difference of reaction system compatibility mainly caused by the immiscibility of macromolecule with RTIL. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4420–4427, 2006     

Hydrophobic ionic liquid‐based ultrasound‐assisted extraction of magnolol and honokiol from cortex Magnoliae officinalis

The hydrophobic ionic liquid of [BMIM][PF₆] was successfully used for the ultrasound‐assisted extraction of hydrophobic magnolol and honokiol from cortex Magnoliae officinalis. To obtain the best extraction efficiencies, some ultrasonic parameters including the concentration of [BMIM][PF₆], pH, ultrasonic power and ultrasonic time were evaluated. The results obtained indicated that the [BMIM][PF₆]‐based ultrasound‐assisted extraction efficiencies of magnolol and honokiol were greater than those of the [BMIM][BF₄]‐based ultrasound‐assisted extraction (from 48.6 to 45.9%) and the traditional ethanol reflux extraction (from 16.2 to 13.3%). Furthermore, the proposed extraction method is validated by the recovery, correlation coefficient (R²) and reproducibility (RSD, n=5), which were 90.8–102.6, 0.9992–0.9998, and 1.6–5.4%, respectively.